Heiner Kallweit says:
====================
r8169: disable ASPM during NAPI poll
This is a rework of ideas from Kai-Heng on how to avoid the known
ASPM issues whilst still allowing for a maximum of ASPM-related power
savings. As a prerequisite some locking is added first.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that ASPM is disabled during NAPI poll, we can remove all ASPM
restrictions. This allows for higher power savings if the network
isn't fully loaded.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several chip versions have problems with ASPM, what may result in
rx_missed errors or tx timeouts. The root cause isn't known but
experience shows that disabling ASPM during NAPI poll can avoid
these problems.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bail out if the function is used with chip versions that don't support
ASPM configuration. In addition remove the delay, it tuned out that
it's not needed, also vendor driver r8125 doesn't have it.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to unlock access
to the config registers in atomic context. Other code parts
running with config register access unlocked are partially
longer and can sleep. Add a usage counter to enable parallel
execution of code parts requiring unlocked config registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to access both registers
in atomic context. Use a spinlock to protect access.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For disabling ASPM during NAPI poll we'll have to access mac ocp
registers in atomic context. This could result in races because
a mac ocp read consists of a write to register OCPDR, followed
by a read from the same register. Therefore add a spinlock to
protect access to mac ocp registers.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the feature was added it was enabled for SW timestamps only but
with current hardware the same out-of-order timestamps can be seen.
Let's expand the area for the feature to all types of timestamps.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Transform zero-length array into flexible-array member in struct
nx_cardrsp_rx_ctx_t.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:361:26: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=]
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:372:25: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=]
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/265
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZAZ57I6WdQEwWh7v@work
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lan95xx_config_aneg_ext() can be simplified by using phy_set_bits().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/3da785c7-3ef8-b5d3-89a0-340f550be3c2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enum skb_drop_reason is more generic, we can adopt it instead.
Provide dev_kfree_skb_irq_reason() and dev_kfree_skb_any_reason().
This means drivers can use more precise drop reasons if they want to.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/20230306204313.10492-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wkup_m3_ipc_get() takes refcount, which should be freed by
wkup_m3_ipc_put(). Add missing refcount release in the error paths.
Fixes: 5a99ae0092 ("soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230106054022.947529-1-linmq006@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
When the k3 ring accelerator driver has been modified to add module build
support, try_module_get() and module_put() have been added to update the
module refcnt. One code path has not been updated and it has introduced
an issue where the refcnt is decremented by module_put() in
k3_ringacc_ring_free() without being incremented previously.
Adding try_module_get() to k3_dmaring_request_dual_ring() ensures the
refcnt is kept up to date.
Fixes: c07f216a8b ("soc: ti: k3-ringacc: Allow the driver to be built as module")
Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221230001404.10902-1-nfrayer@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
CONTROLLER_IN_GPU() is clearly intended to match only Intel devices, but
previously it checked only the PCI Device ID, not the Vendor ID, so it
could match devices from other vendors that happened to use the same Device
ID.
Update CONTROLLER_IN_GPU() so it matches only Intel devices.
Fixes: 535115b5ff ("ALSA: hda - Abort the probe without i915 binding for HSW/B")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307214054.886721-1-helgaas@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Samsung Galaxy Book2 Pro (13" 2022 NP930XED-KA1DE) with codec SSID
144d:c868 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 code.
Signed-off-by: Hamidreza H. Fard <nitocris@posteo.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307163741.3878-1-nitocris@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP platform needs ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make mic-mute/audio-mute/speaker working.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307135317.37621-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It can be helpful to know which card numbers apply to which cards in a
multi-card system so log the card names when we start the test programs.
People looking at the logs may not have direct access to the systems being
tested.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-alsa-log-ctl-name-v1-2-ac0f10cc4db2@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently we only log the names of controls on error but it can be useful
to know what control we're testing (for example, when looking at why the
tests are taking a while to run). People looking at test logs may not have
direct access to the target system. This will increase the amount we write
to the console, hopefully that's buffered.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-alsa-log-ctl-name-v1-1-ac0f10cc4db2@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If a control has an invalid default value then we might fail to set it
when restoring the default value after our write tests, for example due to
correctly implemented range checks in put() operations. Currently this
causes us to report the tests we were running as failed even when the
operation we were trying to test is successful, making it look like there
are problems where none really exist. Stop doing this, only reporting any
issues during the actual test.
We already have validation for the initial readback being in spec and for
writing the default value back so failed tests will be reported for these
controls, and we log an error on the operation that failed when we write so
there will be a diagnostic warning the user that there is a problem.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-alsa-mixer-test-restore-invalid-v1-1-454f0f1f2c4b@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since commit <f26e58bf6f> ("PCI/AER: Enable error reporting
when AER is native"), the PCI core does this for all devices during
enumeration, so the driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230307201625.879567-1-helgaas@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
As HAVE_ARCH_HUGE_VMAP and HAVE_ARCH_HUGE_VMALLOC is supported, we can
implement arch_vmap_pte_range_map_size and arch_vmap_pte_supported_shift
for Svnapot to support huge vmap about napot size.
It can be tested by huge vmap used in pci driver. Huge vmalloc with svnapot
can be tested by test_vmalloc with [1] applied, and probe this
module to run fix_size_alloc_test with use_huge true.
[1]https://lore.kernel.org/all/20221212055657.698420-1-panqinglin2020@iscas.ac.cn/
Signed-off-by: Qinglin Pan <panqinglin00@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230209131647.17245-4-panqinglin00@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Svnapot can be used to support 64KB hugetlb page, so it can become a new
option when using hugetlbfs. Add a basic implementation of hugetlb page,
and support 64KB as a size in it by using Svnapot.
For test, boot kernel with command line contains "default_hugepagesz=64K
hugepagesz=64K hugepages=20" and run a simple test like this:
tools/testing/selftests/vm/map_hugetlb 1 16
And it should be passed.
Signed-off-by: Qinglin Pan <panqinglin00@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230209131647.17245-3-panqinglin00@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add one alternative to enable/disable svnapot support, enable this static
key when "svnapot" is in the "riscv,isa" field of fdt and SVNAPOT compile
option is set. It will influence the behavior of has_svnapot. All code
dependent on svnapot should make sure that has_svnapot return true firstly.
Modify PTE definition for Svnapot, and creates some functions in pgtable.h
to mark a PTE as napot and check if it is a Svnapot PTE. Until now, only
64KB napot size is supported in spec, so some macros has only 64KB version.
Signed-off-by: Qinglin Pan <panqinglin00@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230209131647.17245-2-panqinglin00@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
cond sometimes is (val & MASK) what may result in a false positive
if val is a negative errno. We shouldn't evaluate cond if val < 0.
This has no functional impact here, but it's not nice.
Therefore switch order of the checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/6d8274ac-4344-23b4-d9a3-cad4c39517d4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a missing resource clean up in .remove.
Fixes: e22bae3066 ("scsi: mpi3mr: Add expander devices to STL")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-7-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don't allocate memory again when IOC is being reinitialized.
Fixes: fe6db61515 ("scsi: mpi3mr: Handle offline FW activation in graceful manner")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-6-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A fix for:
DMA-API: pci 0000:83:00.0: device driver has pending DMA allocations while released from device [count=1]
Fixes: 32d457d5a2 ("scsi: mpi3mr: Add framework to issue config requests")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20230302234336.25456-3-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Port is allocated by sas_port_alloc_num() and rphy is allocated by either
sas_end_device_alloc() or sas_expander_alloc(), all of which may return
NULL. So we need to check the rphy to avoid possible NULL pointer access.
If sas_rphy_add() returned with failure, rphy is set to NULL. We would
access the rphy in the following lines which would also result NULL pointer
access.
Fixes: 78316e9dfc ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()")
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
64BIT is part of the incompatible feature set, update the comment
accordingly.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230301133842.671821-1-tudor.ambarus@linaro.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since the default ext4 group desc size is 64 now (assuming that the
64-bit feature is enbled). And the size mentioned in this doc is 64 too.
Change it to 64.
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230222013525.14748-1-bo.wu@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Apparently syzbot figured out that issuing this FSMAP call:
struct fsmap_head cmd = {
.fmh_count = ...;
.fmh_keys = {
{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
},
...
};
ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd);
Produces this crash if the underlying filesystem is a 1k-block ext4
filesystem:
kernel BUG at fs/ext4/ext4.h:3331!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G W O 6.2.0-rc8-achx
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4]
RSP: 0018:ffffc90007c03998 EFLAGS: 00010246
RAX: ffff888004978000 RBX: ffffc90007c03a20 RCX: ffff888041618000
RDX: 0000000000000000 RSI: 00000000000005a4 RDI: ffffffffa0c99b11
RBP: ffff888012330000 R08: ffffffffa0c2b7d0 R09: 0000000000000400
R10: ffffc90007c03950 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000ffffffff R14: 0000000000000c40 R15: ffff88802678c398
FS: 00007fdf2020c880(0000) GS:ffff88807e100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd318a5fe8 CR3: 000000007f80f001 CR4: 00000000001706e0
Call Trace:
<TASK>
ext4_mballoc_query_range+0x4b/0x210 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_getfsmap_datadev+0x713/0x890 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_getfsmap+0x2b7/0x330 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
ext4_ioc_getfsmap+0x153/0x2b0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
__ext4_ioctl+0x2a7/0x17e0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
__x64_sys_ioctl+0x82/0xa0
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf20558aff
RSP: 002b:00007ffd318a9e30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000000200c0 RCX: 00007fdf20558aff
RDX: 00007fdf1feb2010 RSI: 00000000c0c0583b RDI: 0000000000000003
RBP: 00005625c0634be0 R08: 00005625c0634c40 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdf1feb2010
R13: 00005625be70d994 R14: 0000000000000800 R15: 0000000000000000
For GETFSMAP calls, the caller selects a physical block device by
writing its block number into fsmap_head.fmh_keys[01].fmr_device.
To query mappings for a subrange of the device, the starting byte of the
range is written to fsmap_head.fmh_keys[0].fmr_physical and the last
byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical.
IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd
set the inputs as follows:
fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3},
fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14},
Which would return you whatever is mapped in the 12 bytes starting at
physical offset 3.
The crash is due to insufficient range validation of keys[1] in
ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of
the filesystem, which means that s_first_data_block is nonzero.
ext4_get_group_no_and_offset subtracts this quantity from the blocknr
argument before cracking it into a group number and a block number
within a group. IOWs, block group 0 spans blocks 1-8192 (1-based)
instead of 0-8191 (0-based) like what happens with larger blocksizes.
The net result of this encoding is that blocknr < s_first_data_block is
not a valid input to this function. The end_fsb variable is set from
the keys that are copied from userspace, which means that in the above
example, its value is zero. That leads to an underflow here:
blocknr = blocknr - le32_to_cpu(es->s_first_data_block);
The division then operates on -1:
offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
EXT4_SB(sb)->s_cluster_bits;
Leaving an impossibly large group number (2^32-1) in blocknr.
ext4_getfsmap_check_keys checked that keys[0].fmr_physical and
keys[1].fmr_physical are in increasing order, but
ext4_getfsmap_datadev adjusts keys[0].fmr_physical to be at least
s_first_data_block. This implies that we have to check it again after
the adjustment, which is the piece that I forgot.
Reported-by: syzbot+6be2b977c89f79b6b153@syzkaller.appspotmail.com
Fixes: 4a4956249d ("ext4: fix off-by-one fsmap error on 1k block filesystems")
Link: https://syzkaller.appspot.com/bug?id=79d5768e9bfe362911ac1a5057a36fc6b5c30002
Cc: stable@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/Y+58NPTH7VNGgzdd@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A significant number of xfstests can cause ext4 to log one or more
warning messages when they are run on a test file system where the
inline_data feature has been enabled. An example:
"EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode
#16385: comm fsstress: No space for directory leaf checksum. Please
run e2fsck -D."
The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068,
070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585,
589, 626, 631, and 650.
In this situation, the warning message indicates a bug in the code that
performs the RENAME_WHITEOUT operation on a directory entry that has
been stored inline. It doesn't detect that the directory is stored
inline, and incorrectly attempts to compute a dirent block checksum on
the whiteout inode when creating it. This attempt fails as a result
of the integrity checking in get_dirent_tail (usually due to a failure
to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message
is then emitted.
Fix this by simply collecting the inlined data state at the time the
search for the source directory entry is performed. Existing code
handles the rest, and this is sufficient to eliminate all spurious
warning messages produced by the tests above. Go one step further
and do the same in the code that resets the source directory entry in
the event of failure. The inlined state should be present in the
"old" struct, but given the possibility of a race there's no harm
in taking a conservative approach and getting that information again
since the directory entry is being reread anyway.
Fixes: b7ff91fd03 ("ext4: find old entry again if failed to rename whiteout")
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230210173244.679890-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230209-kobj_type-ext4-v1-1-6865fb05c1f8@weissschuh.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), ext4 encrypts the
pagecache page into a bounce page, then writes the bounce page.
It also passes the bounce page to wbc_account_cgroup_owner(). That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.
Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().
Fixes: 001e4a8775 ("ext4: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230203005503.141557-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
damon_pa_mark_accessed_or_deactivate() is accessing a folio via
folio_nr_pages() after folio_put() for the folio has invoked. Fix it.
Link: https://lkml.kernel.org/r/20230304193949.296391-3-sj@kernel.org
Fixes: f70da5ee8f ("mm/damon: convert damon_pa_mark_accessed_or_deactivate() to use folios")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/paddr: Fix folio-use-after-put bugs".
There are two folio accesses after folio_put() in mm/damon/paddr.c file.
Fix those.
This patch (of 2):
damon_pa_young() is accessing a folio via folio_size() after folio_put()
for the folio has invoked. Fix it.
Link: https://lkml.kernel.org/r/20230304193949.296391-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230304193949.296391-2-sj@kernel.org
Fixes: 397b0c3a58 ("mm/damon/paddr: remove folio_sz field from damon_pa_access_chk_result")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org> [6.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When buffered write fails to copy data into underlying page cache page,
ocfs2_write_end_nolock() just zeroes out and dirties the page. This can
leave dirty page beyond EOF and if page writeback tries to write this page
before write succeeds and expands i_size, page gets into inconsistent
state where page dirty bit is clear but buffer dirty bits stay set
resulting in page data never getting written and so data copied to the
page is lost. Fix the problem by invalidating page beyond EOF after
failed write.
Link: https://lkml.kernel.org/r/20230302153843.18499-1-jack@suse.cz
Fixes: 6dbf7bb555 ("fs: Don't invalidate page buffers in block_write_full_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we have locked more than one folios, we cannot wait the lock or bit
(e.g., page lock, buffer head lock, writeback bit) synchronously.
Otherwise deadlock may be triggered. This make it hard to batch the
synchronous migration directly.
This patch re-enables batching synchronous migration via trying to migrate
in batch asynchronously firstly. And any folios that are failed to be
migrated asynchronously will be migrated synchronously one by one.
Test shows that this can restore the TLB flushing batching performance for
synchronous migration effectively.
Link: https://lkml.kernel.org/r/20230303030155.160983-4-ying.huang@intel.com
Fixes: 5dfab109d5 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To simplify the code logic and reduce the line number.
Link: https://lkml.kernel.org/r/20230303030155.160983-3-ying.huang@intel.com
Fixes: 5dfab109d5 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "migrate_pages: fix deadlock in batched synchronous
migration", v2.
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei. Analysis shows that if we have locked some other
folios except the one we are migrating, it's not safe in general to wait
synchronously, for example, to wait the writeback to complete or wait to
lock the buffer head.
So 1/3 fixes the deadlock in a simple way, where the batching support for
the synchronous migration is disabled. The change is straightforward and
easy to be understood. While 3/3 re-introduce the batching for
synchronous migration via trying to migrate asynchronously in batch
optimistically, then fall back to migrate synchronously one by one for
fail-to-migrate folios. Test shows that this can restore the TLB flushing
batching performance for synchronous migration effectively.
This patch (of 3):
Two deadlock bugs were reported for the migrate_pages() batching series.
Thanks Hugh and Pengfei! For example, in the following deadlock trace
snippet,
INFO: task kworker/u4:0:9 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u4:0 state:D stack:0 pid:9 ppid:2 flags:0x00004000
Workqueue: loop4 loop_rootcg_workfn
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? __pfx_wake_page_function+0x10/0x10
__filemap_get_folio+0x73d/0x770
shmem_get_folio_gfp+0x1fd/0xc80
shmem_write_begin+0x91/0x220
generic_perform_write+0x10e/0x2e0
__generic_file_write_iter+0x17e/0x290
? generic_write_checks+0x12b/0x1a0
generic_file_write_iter+0x97/0x180
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_readv_writev+0x13c/0x210
? __sanitizer_cov_trace_const_cmp4+0x1a/0x20
do_iter_write+0xf6/0x330
vfs_iter_write+0x46/0x70
loop_process_work+0x723/0xfe0
loop_rootcg_workfn+0x28/0x40
process_one_work+0x3cc/0x8d0
worker_thread+0x66/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x153/0x190
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
INFO: task repro:1023 blocked for more than 147 seconds.
Not tainted 6.2.0-rc4-kvm+ #1314
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:repro state:D stack:0 pid:1023 ppid:360 flags:0x00004004
Call Trace:
<TASK>
__schedule+0x43b/0xd00
schedule+0x6a/0xf0
io_schedule+0x4a/0x80
folio_wait_bit_common+0x1b5/0x4e0
? compaction_alloc+0x77/0x1150
? __pfx_wake_page_function+0x10/0x10
folio_wait_bit+0x30/0x40
folio_wait_writeback+0x2e/0x1e0
migrate_pages_batch+0x555/0x1ac0
? __pfx_compaction_alloc+0x10/0x10
? __pfx_compaction_free+0x10/0x10
? __this_cpu_preempt_check+0x17/0x20
? lock_is_held_type+0xe6/0x140
migrate_pages+0x100e/0x1180
? __pfx_compaction_free+0x10/0x10
? __pfx_compaction_alloc+0x10/0x10
compact_zone+0xe10/0x1b50
? lock_is_held_type+0xe6/0x140
? check_preemption_disabled+0x80/0xf0
compact_node+0xa3/0x100
? __sanitizer_cov_trace_const_cmp8+0x1c/0x30
? _find_first_bit+0x7b/0x90
sysctl_compaction_handler+0x5d/0xb0
proc_sys_call_handler+0x29d/0x420
proc_sys_write+0x2b/0x40
vfs_write+0x3a3/0x780
ksys_write+0xb7/0x180
__x64_sys_write+0x26/0x30
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f3a2471f59d
RSP: 002b:00007ffe567f7288 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a2471f59d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
RBP: 00007ffe567f72a0 R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000000010 R11: 0000000000000217 R12: 00000000004012e0
R13: 00007ffe567f73e0 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The page migration task has held the lock of the shmem folio A, and is
waiting the writeback of the folio B of the file system on the loop block
device to complete. While the loop worker task which writes back the
folio B is waiting to lock the shmem folio A, because the folio A backs
the folio B in the loop device. Thus deadlock is triggered.
In general, if we have locked some other folios except the one we are
migrating, it's not safe to wait synchronously, for example, to wait the
writeback to complete or wait to lock the buffer head.
To fix the deadlock, in this patch, we avoid to batch the page migration
except for MIGRATE_ASYNC mode. In MIGRATE_ASYNC mode, synchronous waiting
is avoided.
The fix can be improved further. We will do that as soon as possible.
Link: https://lkml.kernel.org/r/20230303030155.160983-1-ying.huang@intel.com
Link: https://lore.kernel.org/linux-mm/87a6c8c-c5c1-67dc-1e32-eb30831d6e3d@google.com/
Link: https://lore.kernel.org/linux-mm/874jrg7kke.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lore.kernel.org/linux-mm/20230227110614.dngdub2j3exr6dfp@quack3/
Link: https://lkml.kernel.org/r/20230303030155.160983-2-ying.huang@intel.com
Fixes: 5dfab109d5 ("migrate_pages: batch _unmap and _move")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: "Xu, Pengfei" <pengfei.xu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Tejun Heo <tj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I'm no longer employed by Canonical which results in email bouncing so add
an entry to my personal email address.
Link: https://lkml.kernel.org/r/20230301090132.280475-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I recently sent a patch to map Dikshita's old CAF address to his current
one @ Qualcomm. It turned out however, that he has two of them, with the
@quicinc.com one meant for upstream contributions. Fix it.
Link: https://lkml.kernel.org/r/20230301110012.1290379-1-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Dikshita Agarwal <quic_dikshita@quicinc.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update to my current employer:
https://research.tuni.fi/nisec/
Link: https://lkml.kernel.org/r/20230301235443.6663-1-jarkko@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
