This branch makes a couple of changes in make coccicheck related to
shell commands.
It also updates the api/atomic_as_refcounter semantic patch to include
WARNING in the output message, as done in other cases.
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
-----BEGIN PGP SIGNATURE-----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=EYqW
-----END PGP SIGNATURE-----
Merge tag 'cocci-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"Changes in make coccicheck and improve a semantic patch
This makes a couple of changes in make coccicheck related to shell
commands.
It also updates the api/atomic_as_refcounter semantic patch to include
WARNING in the output message, as done in other cases"
* tag 'cocci-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: Use /usr/bin/env
scripts: coccicheck: Avoid warning about spurious escape
coccinelle: api/atomic_as_refcounter: include message type in output
A single build error fix: there was a change during the merge window
to a C header parsed by the Rust bindings generator, introducing a
type that it does not handle well. The fix tells the generator to
treat the type as opaque (for now).
-----BEGIN PGP SIGNATURE-----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=jl6q
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.3-rc1' of https://github.com/Rust-for-Linux/linux
Pull Rust fix from Miguel Ojeda:
"A single build error fix: there was a change during the merge window
to a C header parsed by the Rust bindings generator, introducing a
type that it does not handle well.
The fix tells the generator to treat the type as opaque (for now)"
* tag 'rust-fixes-6.3-rc1' of https://github.com/Rust-for-Linux/linux:
rust: bindgen: Add `alt_instr` as opaque type
Updates that missed the first pull, mostly because of needing more
soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug
fixes), an enclosure services (ses) update (mostly bug fixes) and
other minor bug fixes and changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZAJf2SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWYeAP9u6umX
5Trq6mtfdPyhSxIhgD6AwJDgVkeApSKAHZRu0AD/dfMTQmeaJory4LD4JW+uAgVl
yFPVz9VPlKTiaM2lwUI=
=BKzr
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Updates that missed the first pull, mostly because of needing more
soak time.
Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
enclosure services (ses) update (mostly bug fixes) and other minor bug
fixes and changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: zfcp: Trace when request remove fails after qdio send fails
scsi: zfcp: Change the type of all fsf request id fields and variables to u64
scsi: zfcp: Make the type for accessing request hashtable buckets size_t
scsi: ufs: core: Simplify ufshcd_execute_start_stop()
scsi: ufs: core: Rely on the block layer for setting RQF_PM
scsi: core: Extend struct scsi_exec_args
scsi: lpfc: Fix double word in comments
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
scsi: core: Fix a source code comment
scsi: cxgbi: Remove unneeded version.h include
scsi: qedi: Remove unneeded version.h include
scsi: mpi3mr: Remove unneeded version.h include
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
scsi: mpi3mr: Use number of bits to manage bitmap sizes
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
scsi: mpi3mr: Fix an issue found by KASAN
scsi: mpi3mr: Replace 1-element array with flex-array
scsi: ipr: Work around fortify-string warning
scsi: ipr: Make ipr_probe_ioa_part2() return void
...
Add a build option to disable modesetting support. This is useful in
cases where the guest only needs to use the GPU in a headless mode, or
(such as in the CrOS usage) window surfaces are proxied to a host
compositor.
As the modesetting ioctls are a big surface area for potential security
bugs to be found (it's happened in the past, we should assume it will
again in the future), it makes sense to have a build option to disable
those ioctls in cases where they serve no legitimate purpose.
v2: Use more if (IS_ENABLED(...))
v3: Also permit the host to advertise no scanouts
v4: Spiff out commit msg
v5: Make num_scanouts==0 and DRM_VIRTIO_GPU_KMS=n behave the same
v6: Drop conditionally building virtgpu_display.c and early-out of
it's init/fini fxns instead
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302233506.3146290-1-robdclark@gmail.com
This is passing IS_ERR() instead of PTR_ERR() so instead of an error
code it prints and returns the number 1.
Fixes: 4a55ed6f89 ("i2c: Add GXP SoC I2C Controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The ppc64le_allmodconfig sets I2C_PASEMI=y and leaves COMPILE_TEST to
default to y and I2C_APPLE to default to m, running into a known
incompatible configuration that breaks the build [1]. Specifically,
a common dependency (i2c-pasemi-core.o in this case) cannot be used by
both builtin and module consumers.
Disable I2C_APPLE when I2C_PASEMI is a builtin to prevent this.
[1]: https://lore.kernel.org/all/202112061809.XT99aPrf-lkp@intel.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The thermal zone parameter specifies the bang-bang governor.
The Kconfig selects the bang-bang governor. So it is pointless to test
if the governor was set for the thermal zone assuming it may not have
been compiled-in.
Remove the test and prevent another access into the thermal internals.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Kaestle <peter@piie.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal zone device structure is in the process of being private
to the thermal framework core code. This driver is directly accessing
and changing the monitoring polling rate.
After discussing with the maintainers of this driver, having the
polling interval at module loading time is enough for their purpose.
Change the code to take into account the interval when the module is
loaded but restrict the permissions so the value can not be changed
afterwards.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function tegra_tsensor_enable_hw_channel() takes the thermal zone
lock to prevent "a potential" race with a call to set_trips()
callback.
The driver must not play with the thermal framework core code
internals.
The tegra_tsensor_enable_hw_channel() is called by:
- the suspend / resume callbacks
- the probe function after the thermal zones are registered
The thermal zone lock taken in this function is supposed to protect
from a call to the set_trips() callback which writes in the same
register.
The potential race is when suspend / resume are called at the same
time as set_trips. This one is called only in
thermal_zone_device_update().
- At suspend time, the 'in_suspend' is set, thus the
thermal_zone_device_update() bails out immediately and set_trips is
not called during this moment.
- At resume time, the thermal zone is updated at PM_POST_SUSPEND,
thus the driver has already set the TH2 temperature.
- At probe time, we register the thermal zone and then we set the
TH2. The only scenario I can see so far is the interrupt fires, the
thermal_zone_update() is called exactly at the moment
tegra_tsensor_enable_hw_channel() a few lines after registering it.
Enable the channels before setting up the interrupt. We close the
potential race window without using the thermal zone's lock.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal_hwmon is playing with the thermal core code
internals. Changing the code would be too invasive for now.
We can consider the thermal_hwmon.c is part of the thermal core code
as it provides a glue to tie the hwmon and the thermal zones.
Let's include the thermal_core.h header.
No functional change intended.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The driver is reading the passive polling rate in the thermal zone
structure. We want to prevent the drivers to rummage around in the
thermal zone structure.
On the other side, the delay is what the driver passed to the
thermal_zone_device_register() function, so it has already the
information.
Reuse the information we have instead of reading the information we
set.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the accesses to 'tz->type' by its accessor version in order to
self-encapsulate the thermal_zone_device structure.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to get the thermal zone id but without directly accessing the
thermal zone device structure, add an accessor.
Use the accessor in the hwmon_scmi and acpi_thermal.
No functional change intented.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the spear associated device instead of the thermal zone device
which belongs to the thermal framework internals.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal zone device structure is exposed via the exported
thermal.h header. This structure should stay private the thermal core
code. In order to encapsulate the structure, let's add an accessor to
get the 'type' of the thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some drivers are directly using the thermal zone's 'device' structure
field.
Use the driver device pointer instead of the thermal zone device when
it is available.
Remove the traces when they are duplicate with the traces in the core
code.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek LVTS
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The devres variant of thermal_add_hwmon_sysfs() only takes the thermal
zone structure pointer as parameter.
Actually, it uses the tz->device to add it in the devres list.
It is preferable to use the device registering the thermal zone
instead of the thermal zone device itself. That prevents the driver
accessing the thermal zone structure internals and it is from my POV
more correct regarding how devm_ is used.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #amlogic_thermal
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal->tzp->no_hwmon parameter is only used when calling
thermal_zone_device_register().
Setting it to 'false' before calling thermal_add_hwmon_sysfs() has no
effect.
Remove the call and again prevent the drivers to access the thermal
internals.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some get_temp() ops implementation are showing an error or a debug
message if the reading of the sensor fails.
The debug message is already displayed from the call site of this
ops. So we can remove it.
On the other side, the error should not be displayed because in
production that can raise tons of messages.
Finally, some drivers are showing a debug message with the
temperature, this is also accessible through the trace from the core
code in the temperature_update() function.
Another benefit is the dev_* messages are accessing the thermal zone
device field from the structure, so we encapsulate even more the code
by preventing these accesses.
Remove those messages.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> #Armada
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #brcmstb_thermal.c
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The different thermal drivers are showing an error in case the
get_temp() fails. Actually no traces should be displayed in the
backend ops but in the call site of this ops.
Furthermore, the message is often a dev_dbg message where the
tz->device is used, thus using the internal of the structure from the
driver.
Show a debug message if the thermal_zone_get_temp() fails to read the
sensor temperature, so code showing the message is factored out and
the tz->device accesss is in the scope of the thermal core framework.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.
In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.
Use the devdata accessor introduced in the previous patch.
No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw
Acked-by: Gregory Greenman <gregory.greenman@intel.com> #iwlwifi
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> #power_supply
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> #ahci
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.
In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.
Use the devdata accessor introduced in the previous patch.
No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net> #hwmon
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.
In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.
Use the devdata accessor introduced in the previous patch.
No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts
Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom
Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thermal zone device structure is exposed to the different drivers
and obviously they access the internals while that should be
restricted to the core thermal code.
In order to self-encapsulate the thermal core code, we need to prevent
the drivers accessing directly the thermal zone structure and provide
accessor functions to deal with.
Provide an accessor to the 'devdata' structure and make use of it in
the different drivers.
No functional changes intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When user space updates the trip point there is a deadlock, which results
in caller gets blocked forever.
Commit 05eeee2b51 ("thermal/core: Protect sysfs accesses to thermal
operations with thermal zone mutex"), added a mutex for tz->lock in the
function trip_point_temp_store(). Hence, trip set callback() can't
call any thermal zone API as they are protected with the same mutex lock.
The callback here calling thermal_zone_device_enable(), which will result
in deadlock.
Move the thermal_zone_device_enable() to proc_thermal_pci_probe() to
avoid this deadlock.
Fixes: 05eeee2b51 ("thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: 6.2+ <stable@vger.kernel.org> # 6.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix an error pointer dereference in the quark_dts Intel thermal
driver (Dan Carpenter).
- Fix the intel_bxt_pmic_thermal driver Kconfig entry to select REGMAP
which is not user-visible instead of depending on it (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=dH0U
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix two issues in the Intel thermal control drivers.
Specifics:
- Fix an error pointer dereference in the quark_dts Intel thermal
driver (Dan Carpenter)
- Fix the intel_bxt_pmic_thermal driver Kconfig entry to select
REGMAP which is not user-visible instead of depending on it (Randy
Dunlap)"
* tag 'thermal-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: BXT_PMIC: select REGMAP instead of depending on it
thermal: intel: quark_dts: fix error pointer dereference
- Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA (Vojtech
Hejsek).
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello).
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=D8xL
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These update ACPI quirks for some x86 platforms and add an IRQ
override quirk for one more system.
Specifics:
- Add an ACPI IRQ override quirk for Asus Expertbook B2402FBA
(Vojtech Hejsek)
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello)
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello)"
* tag 'acpi-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
ACPI: x86: Drop quirk for HP Elitebook
ACPI: resource: Skip IRQ override on Asus Expertbook B2402FBA
- Fix error handling in the apple-soc cpufreq driver (Dan Carpenter).
- Change the log level of a message in the amd-pstate cpufreq driver
so it is more visible to users (Kai-Heng Feng).
- Adjust the balance_performance EPP value for Sapphire Rapids in the
intel_pstate cpufreq driver (Srinivas Pandruvada).
- Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick Alcock).
- Make a read-only kobj_type structure in the schedutil cpufreq governor
constant (Thomas Weißschuh).
- Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
power capping driver (Sumeet Pawnikar).
-----BEGIN PGP SIGNATURE-----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=lRKS
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update power capping (new hardware support and cleanup) and
cpufreq (bug fixes, cleanups and intel_pstate adjustment for a new
platform).
Specifics:
- Fix error handling in the apple-soc cpufreq driver (Dan Carpenter)
- Change the log level of a message in the amd-pstate cpufreq driver
so it is more visible to users (Kai-Heng Feng)
- Adjust the balance_performance EPP value for Sapphire Rapids in the
intel_pstate cpufreq driver (Srinivas Pandruvada)
- Remove MODULE_LICENSE from 3 pieces of non-modular code (Nick
Alcock)
- Make a read-only kobj_type structure in the schedutil cpufreq
governor constant (Thomas Weißschuh)
- Add Add Power Limit4 support for Meteor Lake SoC to the Intel RAPL
power capping driver (Sumeet Pawnikar)"
* tag 'pm-6.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: apple-soc: Fix an IS_ERR() vs NULL check
powercap: remove MODULE_LICENSE in non-modules
cpufreq: intel_pstate: remove MODULE_LICENSE in non-modules
powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC
cpufreq: amd-pstate: remove MODULE_LICENSE in non-modules
cpufreq: schedutil: make kobj_type structure constant
cpufreq: amd-pstate: Let user know amd-pstate is disabled
cpufreq: intel_pstate: Adjust balance_performance EPP for Sapphire Rapids
-----BEGIN PGP SIGNATURE-----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=qWNf
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Here's a set of fixes/changes that didn't make the first cut, either
because they got queued before I sent the early merge request, or
fixes that came in afterwards. In detail:
- Don't set MSG_NOSIGNAL on recv/recvmsg opcodes, as AF_PACKET will
error out (David)
- Fix for spurious poll wakeups (me)
- Fix for a file leak for buffered reads in certain conditions
(Joseph)
- Don't allow registered buffers of mixed types (Pavel)
- Improve handling of huge pages for registered buffers (Pavel)
- Provided buffer ring size calculation fix (Wojciech)
- Minor cleanups (me)"
* tag 'io_uring-6.3-2023-03-03' of git://git.kernel.dk/linux:
io_uring/poll: don't pass in wake func to io_init_poll_iocb()
io_uring: fix fget leak when fs don't support nowait buffered read
io_uring/poll: allow some retries for poll triggering spuriously
io_uring: remove MSG_NOSIGNAL from recvmsg
io_uring/rsrc: always initialize 'folio' to NULL
io_uring/rsrc: optimise registered huge pages
io_uring/rsrc: optimise single entry advance
io_uring/rsrc: disallow multi-source reg buffers
io_uring: remove unused wq_list_merge
io_uring: fix size calculation when registering buf ring
io_uring/rsrc: fix a comment in io_import_fixed()
io_uring: rename 'in_idle' to 'in_cancel'
io_uring: consolidate the put_ref-and-return section of adding work
-----BEGIN PGP SIGNATURE-----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=ezrg
-----END PGP SIGNATURE-----
Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Don't access released socket during error recovery (Akinobu
Mita)
- Bring back auto-removal of deleted namespaces during sequential
scan (Christoph Hellwig)
- Fix an error code in nvme_auth_process_dhchap_challenge (Dan
Carpenter)
- Show well known discovery name (Daniel Wagner)
- Add a missing endianess conversion in effects masking (Keith
Busch)
- Fix for a regression introduced in blk-rq-qos during init in this
merge window (Breno)
- Reorder a few fields in struct blk_mq_tag_set, eliminating a few
holes and shrinking it (Christophe)
- Remove redundant bdev_get_queue() NULL checks (Juhyung)
- Add sed-opal single user mode support flag (Luca)
- Remove SQE128 check in ublk as it isn't needed, saving some memory
(Ming)
- Op specific segment checking for cloned requests (Uday)
- Exclusive open partition scan fixes (Yu)
- Loop offset/size checking before assigning them in the device (Zhong)
- Bio polling fixes (me)
* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
nvme-fabrics: show well known discovery name
nvme-tcp: don't access released socket during error recovery
nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
nvme: bring back auto-removal of deleted namespaces during sequential scan
blk-iocost: Pass gendisk to ioc_refresh_params
nvme: fix sparse warning on effects masking
block: be a bit more careful in checking for NULL bdev while polling
block: clear bio->bi_bdev when putting a bio back in the cache
loop: loop_set_status_from_info() check before assignment
ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
block: remove more NULL checks after bdev_get_queue()
blk-mq: Reorder fields in 'struct blk_mq_tag_set'
block: fix scan partition for exclusively open device again
block: Revert "block: Do not reread partition table on exclusively open device"
sed-opal: add support flag for SUM in status ioctl
* Revert commit 104ff59af7 ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") as it is causing serious regressions (failure to boot)
on some laptops.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZAHBoAAKCRDdoc3SxdoY
dn9YAQDnSDsGEmFVMhgMTGoI0TKuyRH25eMS1uOo+CTV4q2g2QD/R2aOOZpVgbBl
vNmXBFCxSmsYhI+JQEgVCwaOoIEu4A4=
=ZHdp
-----END PGP SIGNATURE-----
Merge tag 'ata-6.3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
- Revert commit 104ff59af7 ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") as it is causing serious regressions (failure to boot)
on some laptops
* tag 'ata-6.3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"
At sc7280, pingpong block is used to management the dither effects
to reduce distortion at panel. Currently pingpong-0 base offset is
wrongly set at 0x59000. This mistake will not cause system to crash.
However it will make dither not work. This patch correct sc7280 ping
pong-0 block base offset.
Changes in v2:
-- add more details info n regrading of pingpong block at commit text
Fixes: 591e34a091 ("drm/msm/disp/dpu1: add support for display for SC7280 target")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524332/
Link: https://lore.kernel.org/r/1677533800-3125-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
DPU driver has been using the DPU_CLK_CTRL_CURSOR prefix for the DMA
SSPP blocks used for the cursor planes. This has lead to the confusion
at least for the MSM8998 platform. In preparation to supporting the
cursor SSPP blocks, use proper enum values to index DMA SSPP clock
controls.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550 on top of next-20230116
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522228/
Link: https://lore.kernel.org/r/20230211231259.1308718-14-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
DMA2 and DMA3 planes on msm8998 should use corresponding DMA2 and DMA3
clocks rather than CURSOR0/1 clocks (which are used for the CURSOR
planes). Correct corresponding SSPP declarations.
Fixes: 94391a14fc ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Cc: Jami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522230/
Link: https://lore.kernel.org/r/20230211231259.1308718-13-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
QSEED4 is a newer variant of QSEED3LITE, which should be used on
sm8250 and sm8350. Fix the DPU caps structure and used feature masks.
Fixes: d21fc5dfc3 ("drm/msm/dpu1: add support for qseed3lite used on sm8250")
Fixes: 0e91bcbb00 ("drm/msm/dpu: Add SM8350 to hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522229/
Link: https://lore.kernel.org/r/20230211231259.1308718-10-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
QSEED4 is a newer variant of QSEED3LITE, which should be used on
sm8550. Fix the DPU caps structure and used feature masks.
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522213/
Link: https://lore.kernel.org/r/20230211231259.1308718-7-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
According to vendor DTS files both sm6115 and qcm2290 should have
max_mixer_width set to 2048 (DEFAULT_DPU_LINE_WIDTH). Correct it.
Fixes: 3581b7062c ("drm/msm/disp/dpu1: add support for display on SM6115")
Fixes: 5334087ee7 ("drm/msm: add support for QCM2290 MDSS")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522212/
Link: https://lore.kernel.org/r/20230211231259.1308718-6-dmitry.baryshkov@linaro.org
[quic_abhinavk@quicinc.com: fix minor typo in commit message]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fix typo in the name of the sblk structure for the sm8550's dma_sblk_5.
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522225/
Link: https://lore.kernel.org/r/20230211231259.1308718-4-dmitry.baryshkov@linaro.org
[quic_abhinavk@quicinc.com: fix minor typo in commit message]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Merge additional ACPI quirks for x86 systems:
- Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
any more after a firmware update (Mario Limonciello).
- Add all Cezanne systems to the list for forcing StorageD3Enable,
because they all need the same quirk (Mario Limonciello).
* acpi-pm:
ACPI: x86: Drop quirk for HP Elitebook
* acpi-x86:
ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable
Martin suggested that instead of using a byte in the hole (which he has
a use for in his future patch) in bpf_local_storage_elem, we can
dispatch a different call_rcu callback based on whether we need to free
special fields in bpf_local_storage_elem data. The free path, described
in commit 9db44fdd81 ("bpf: Support kptrs in local storage maps"),
only waits for call_rcu callbacks when there are special (kptrs, etc.)
fields in the map value, hence it is necessary that we only access
smap in this case.
Therefore, dispatch different RCU callbacks based on the BPF map has a
valid btf_record, which dereference and use smap's btf_record only when
it is valid.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230303141542.300068-1-memxor@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
- Add empty command line parameter handling stubs to kernel for all command
line parameters which are handled in the decompressor. This avoids
invalid "Unknown kernel command line parameters" messages from the
kernel, and also avoids that these will be incorrectly passed to user
space. This caused already confusion, therefore add the empty stubs
- Add missing phys_to_virt() handling to machine check handler
- Introduce and use a union to be used for zcrypt inline assemblies. This
makes sure that only a register wide member of the union is passed as
input and output parameter to inline assemblies, while usual C code uses
other members of the union to access bit fields of it
- Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to
atomically read a 128-bit value from memory. This replaces the (mis-)use
of the 128-bit cmpxchg operation to do the same in cpum_sf code.
Currently gcc does not generate the used lpq instruction if __READ_ONCE()
is used for aligned 128-bit accesses, therefore use this s390 specific
helper
- Simplify machine check handler code if a task needs to be killed because
of e.g. register corruption due to a machine malfunction
- Perform CPU reset to clear pending interrupts and TLB entries on an
already stopped target CPU before delegating work to it
- Generate arch/s390/boot/vmlinux.map link map for the decompressor, when
CONFIG_VMLINUX_MAP is enabled for debugging purposes
- Fix segment type handling for dcssblk devices. It incorrectly always
returned type "READ/WRITE" even for read-only segements, which can result
in a kernel panic if somebody tries to write to a read-only device
- Sort config S390 select list again
- Fix two kprobe reenter bugs revealed by a recently added kprobe kunit
test
-----BEGIN PGP SIGNATURE-----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=zZId
-----END PGP SIGNATURE-----
Merge tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Add empty command line parameter handling stubs to kernel for all
command line parameters which are handled in the decompressor. This
avoids invalid "Unknown kernel command line parameters" messages from
the kernel, and also avoids that these will be incorrectly passed to
user space. This caused already confusion, therefore add the empty
stubs
- Add missing phys_to_virt() handling to machine check handler
- Introduce and use a union to be used for zcrypt inline assemblies.
This makes sure that only a register wide member of the union is
passed as input and output parameter to inline assemblies, while
usual C code uses other members of the union to access bit fields of
it
- Add and use a READ_ONCE_ALIGNED_128() macro, which can be used to
atomically read a 128-bit value from memory. This replaces the
(mis-)use of the 128-bit cmpxchg operation to do the same in cpum_sf
code. Currently gcc does not generate the used lpq instruction if
__READ_ONCE() is used for aligned 128-bit accesses, therefore use
this s390 specific helper
- Simplify machine check handler code if a task needs to be killed
because of e.g. register corruption due to a machine malfunction
- Perform CPU reset to clear pending interrupts and TLB entries on an
already stopped target CPU before delegating work to it
- Generate arch/s390/boot/vmlinux.map link map for the decompressor,
when CONFIG_VMLINUX_MAP is enabled for debugging purposes
- Fix segment type handling for dcssblk devices. It incorrectly always
returned type "READ/WRITE" even for read-only segements, which can
result in a kernel panic if somebody tries to write to a read-only
device
- Sort config S390 select list again
- Fix two kprobe reenter bugs revealed by a recently added kprobe kunit
test
* tag 's390-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/kprobes: fix current_kprobe never cleared after kprobes reenter
s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler
s390/Kconfig: sort config S390 select list again
s390/extmem: return correct segment type in __segment_load()
s390/decompressor: add link map saving
s390/smp: perform cpu reset before delegating work to target cpu
s390/mcck: cleanup user process termination path
s390/cpum_sf: use READ_ONCE_ALIGNED_128() instead of 128-bit cmpxchg
s390/rwonce: add READ_ONCE_ALIGNED_128() macro
s390/ap,zcrypt,vfio: introduce and use ap_queue_status_reg union
s390/nmi: fix virtual-physical address confusion
s390/setup: do not complain about parameters handled in decompressor
