commit 018d6711c2 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
It was reported that several more Dell systems suffered the same symptoms.
As the list is continuing to grow but these are all Cezanne systems,
instead add Cezanne to the CPU list to apply the StorageD3Enable property
and remove the whole list.
It was also reported that an HP system only has StorageD3Enable on the ACPI
device for the first NVME disk, not the second.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773
Reported-by: David Alvarez Lombardi <dqalombardi@proton.me>
Reported-by: dbilios@stdio.gr
Reported-and-tested-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Tested-by: victor.bonnelle@proton.me
Tested-by: hurricanepootis@protonmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Test skb and xdp dynptr functionality in the following ways:
1) progs/test_cls_redirect_dynptr.c
* Rewrite "progs/test_cls_redirect.c" test to use dynptrs to parse
skb data
* This is a great example of how dynptrs can be used to simplify a
lot of the parsing logic for non-statically known values.
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t cls_redirect"):
original version: 0.092 sec
with dynptrs: 0.078 sec
2) progs/test_xdp_dynptr.c
* Rewrite "progs/test_xdp.c" test to use dynptrs to parse xdp data
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t xdp_attach"):
original version: 0.118 sec
with dynptrs: 0.094 sec
3) progs/test_l4lb_noinline_dynptr.c
* Rewrite "progs/test_l4lb_noinline.c" test to use dynptrs to parse
skb data
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t l4lb_all"):
original version: 0.062 sec
with dynptrs: 0.081 sec
For number of processed verifier instructions:
original version: 6268 insns
with dynptrs: 2588 insns
4) progs/test_parse_tcp_hdr_opt_dynptr.c
* Add sample code for parsing tcp hdr opt lookup using dynptrs.
This logic is lifted from a real-world use case of packet parsing
in katran [0], a layer 4 load balancer. The original version
"progs/test_parse_tcp_hdr_opt.c" (not using dynptrs) is included
here as well, for comparison.
When measuring the user + system time between the original version
vs. using dynptrs, and averaging the time for 10 runs (using
"time ./test_progs -t parse_tcp_hdr_opt"):
original version: 0.031 sec
with dynptrs: 0.045 sec
5) progs/dynptr_success.c
* Add test case "test_skb_readonly" for testing attempts at writes
on a prog type with read-only skb ctx.
* Add "test_dynptr_skb_data" for testing that bpf_dynptr_data isn't
supported for skb progs.
6) progs/dynptr_fail.c
* Add test cases "skb_invalid_data_slice{1,2,3,4}" and
"xdp_invalid_data_slice{1,2}" for testing that helpers that modify the
underlying packet buffer automatically invalidate the associated
data slice.
* Add test cases "skb_invalid_ctx" and "xdp_invalid_ctx" for testing
that prog types that do not support bpf_dynptr_from_skb/xdp don't
have access to the API.
* Add test case "dynptr_slice_var_len{1,2}" for testing that
variable-sized len can't be passed in to bpf_dynptr_slice
* Add test case "skb_invalid_slice_write" for testing that writes to a
read-only data slice are rejected by the verifier.
* Add test case "data_slice_out_of_bounds_skb" for testing that
writes to an area outside the slice are rejected.
* Add test case "invalid_slice_rdwr_rdonly" for testing that prog
types that don't allow writes to packet data don't accept any calls
to bpf_dynptr_slice_rdwr.
[0] https://github.com/facebookincubator/katran/blob/main/katran/lib/bpf/pckt_parsing.h
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230301154953.641654-11-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words. It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.
That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more. And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation. It's a lose-lose
situation.
So just change the 'u32[2]' into a 'u64' and be done with it.
We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).
So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.
This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently. By just using a saner data structure, it went from
unsigned __capi;
CAP_FOR_EACH_U32(__capi) {
if (a.cap[__capi] != b.cap[__capi])
return false;
}
return true;
to just being
return a.val == b.val;
instead. Which is rather more obvious both to humans and to compilers.
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two new kfuncs are added, bpf_dynptr_slice and bpf_dynptr_slice_rdwr.
The user must pass in a buffer to store the contents of the data slice
if a direct pointer to the data cannot be obtained.
For skb and xdp type dynptrs, these two APIs are the only way to obtain
a data slice. However, for other types of dynptrs, there is no
difference between bpf_dynptr_slice(_rdwr) and bpf_dynptr_data.
For skb type dynptrs, the data is copied into the user provided buffer
if any of the data is not in the linear portion of the skb. For xdp type
dynptrs, the data is copied into the user provided buffer if the data is
between xdp frags.
If the skb is cloned and a call to bpf_dynptr_data_rdwr is made, then
the skb will be uncloned (see bpf_unclone_prologue()).
Please note that any bpf_dynptr_write() automatically invalidates any prior
data slices of the skb dynptr. This is because the skb may be cloned or
may need to pull its paged buffer into the head. As such, any
bpf_dynptr_write() will automatically have its prior data slices
invalidated, even if the write is to data in the skb head of an uncloned
skb. Please note as well that any other helper calls that change the
underlying packet buffer (eg bpf_skb_pull_data()) invalidates any data
slices of the skb dynptr as well, for the same reasons.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-10-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add xdp dynptrs, which are dynptrs whose underlying pointer points
to a xdp_buff. The dynptr acts on xdp data. xdp dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of xdp->data and xdp->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For reads and writes on the dynptr, this includes reading/writing
from/to and across fragments. Data slices through the bpf_dynptr_data
API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() should be used.
For examples of how xdp dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-9-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add skb dynptrs, which are dynptrs whose underlying pointer points
to a skb. The dynptr acts on skb data. skb dynptrs have two main
benefits. One is that they allow operations on sizes that are not
statically known at compile-time (eg variable-sized accesses).
Another is that parsing the packet data through dynptrs (instead of
through direct access of skb->data and skb->data_end) can be more
ergonomic and less brittle (eg does not need manual if checking for
being within bounds of data_end).
For bpf prog types that don't support writes on skb data, the dynptr is
read-only (bpf_dynptr_write() will return an error)
For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write()
interfaces, reading and writing from/to data in the head as well as from/to
non-linear paged buffers is supported. Data slices through the
bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used.
For examples of how skb dynptrs can be used, please see the attached
selftests.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-8-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds __uninit as a kfunc annotation.
This will be useful for scenarios such as for example in dynptrs,
indicating whether the dynptr should be checked by the verifier as an
initialized or an uninitialized dynptr.
Without this annotation, the alternative would be needing to hard-code
in the verifier the specific kfunc to indicate that arg should be
treated as an uninitialized arg.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-7-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit refactors the logic for determining which register in a
function is the dynptr into "get_dynptr_arg_reg". This will be used
in the future when the dynptr reg for BPF_FUNC_dynptr_write will need
to be obtained in order to support writes for skb dynptrs.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-6-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some bpf dynptr functions will be called from places where
if CONFIG_BPF_SYSCALL is not set, then the dynptr function is
undefined. For example, when skb type dynptrs are added in the
next commit, dynptr functions are called from net/core/filter.c
This patch defines no-op implementations of these dynptr functions
so that they do not break compilation by being an undefined reference.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-5-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change allows kfuncs to take in an uninitialized dynptr as a
parameter. Before this change, only helper functions could successfully
use uninitialized dynptrs. This change moves the memory access check
(including stack state growing and slot marking) into
process_dynptr_func(), which both helpers and kfuncs call into.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-4-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change cleans up process_dynptr_func's flow to be more intuitive
and updates some comments with more context.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-3-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf mirror of the in-kernel sk_buff and xdp_buff data structures are
__sk_buff and xdp_md. Currently, when we pass in the program ctx to a
kfunc where the program ctx is a skb or xdp buffer, we reject the
program if the in-kernel definition is sk_buff/xdp_buff instead of
__sk_buff/xdp_md.
This change allows "sk_buff <--> __sk_buff" and "xdp_buff <--> xdp_md"
to be recognized as valid matches. The user program may pass in their
program ctx as a __sk_buff or xdp_md, and the in-kernel definition
of the kfunc may define this arg as a sk_buff or xdp_buff.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20230301154953.641654-2-joannelkoong@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- sh: clk: Fix clk_enable() to return 0 on NULL clk
- sh: intc: Avoid spurious sizeof-pointer-div warning
-----BEGIN PGP SIGNATURE-----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=2dUB
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
- regression fix in connection with the rtl8169 driver on SuperH boards
that was introduced when the driver was switched to use
devm_clk_get_optional_enabled() to simplify the code (Geert
Uytterhoeven)
- build warning fix to allow the kernel to be built with CONFIG_WERROR
enabled (Michael Karcher)
* tag 'sh-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: clk: Fix clk_enable() to return 0 on NULL clk
sh: intc: Avoid spurious sizeof-pointer-div warning
1, Make -mstrict-align configurable;
2, Add kernel relocation and KASLR support;
3, Add single kernel image implementation for kdump;
4, Add hardware breakpoints/watchpoints support;
5, Add kprobes/kretprobes/kprobes_on_ftrace support;
6, Add LoongArch support for some selftests.
-----BEGIN PGP SIGNATURE-----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=SzL5
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Make -mstrict-align configurable
- Add kernel relocation and KASLR support
- Add single kernel image implementation for kdump
- Add hardware breakpoints/watchpoints support
- Add kprobes/kretprobes/kprobes_on_ftrace support
- Add LoongArch support for some selftests.
* tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits)
selftests/ftrace: Add LoongArch kprobe args string tests support
selftests/seccomp: Add LoongArch selftesting support
tools: Add LoongArch build infrastructure
samples/kprobes: Add LoongArch support
LoongArch: Mark some assembler symbols as non-kprobe-able
LoongArch: Add kprobes on ftrace support
LoongArch: Add kretprobes support
LoongArch: Add kprobes support
LoongArch: Simulate branch and PC* instructions
LoongArch: ptrace: Add hardware single step support
LoongArch: ptrace: Add function argument access API
LoongArch: ptrace: Expose hardware breakpoints to debuggers
LoongArch: Add hardware breakpoints/watchpoints support
LoongArch: kdump: Add crashkernel=YM handling
LoongArch: kdump: Add single kernel image implementation
LoongArch: Add support for kernel address space layout randomization (KASLR)
LoongArch: Add support for kernel relocation
LoongArch: Add la_abs macro implementation
LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
...
- Add support for rust (yay!)
- Add support for LTO
- Add platform bus support to virtio-pci
- Various virtio fixes
- Coding style, spelling cleanups
-----BEGIN PGP SIGNATURE-----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=q2ks
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Add support for rust (yay!)
- Add support for LTO
- Add platform bus support to virtio-pci
- Various virtio fixes
- Coding style, spelling cleanups
* tag 'uml-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (27 commits)
Documentation: rust: Fix arch support table
uml: vector: Remove unused definitions VECTOR_{WRITE,HEADERS}
um: virt-pci: properly remove PCI device from bus
um: virtio_uml: move device breaking into workqueue
um: virtio_uml: mark device as unregistered when breaking it
um: virtio_uml: free command if adding to virtqueue failed
UML: define RUNTIME_DISCARD_EXIT
virt-pci: add platform bus support
um-virt-pci: Make max delay configurable
um: virt-pci: implement pcibios_get_phb_of_node()
um: Support LTO
um: put power options in a menu
um: Use CFLAGS_vmlinux
um: Prevent building modules incompatible with MODVERSIONS
um: Avoid pcap multiple definition errors
um: Make the definition of cpu_data more compatible
x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
rust: arch/um: Add support for CONFIG_RUST under x86_64 UML
rust: arch/um: Disable FP/SIMD instruction to match x86
rust: arch/um: Use 'pie' relocation mode under UML
...
We only use one, and it's io_poll_wake(). Hardwire that in the initial
init, as well as in __io_queue_proc() if we're setting up for double
poll.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
JFFS2:
- Fix memory corruption in error path
- Spelling and coding style fixes
UBI:
- Switch to BLK_MQ_F_BLOCKING in ubiblock
- Wire up partent device (for sysfs)
- Multiple UAF bugfixes
- Fix for an infinite loop in WL error path
UBIFS:
- Fix for multiple memory leaks in error paths
- Fixes for wrong space accounting
- Minor cleanups
- Spelling and coding style fixes
-----BEGIN PGP SIGNATURE-----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=fTYq
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull jffs2, ubi and ubifs updates from Richard Weinberger:
"JFFS2:
- Fix memory corruption in error path
- Spelling and coding style fixes
UBI:
- Switch to BLK_MQ_F_BLOCKING in ubiblock
- Wire up partent device (for sysfs)
- Multiple UAF bugfixes
- Fix for an infinite loop in WL error path
UBIFS:
- Fix for multiple memory leaks in error paths
- Fixes for wrong space accounting
- Minor cleanups
- Spelling and coding style fixes"
* tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (36 commits)
ubi: block: Fix a possible use-after-free bug in ubiblock_create()
ubifs: make kobj_type structures constant
mtd: ubi: block: wire-up device parent
mtd: ubi: wire-up parent MTD device
ubi: use correct names in function kernel-doc comments
ubi: block: set BLK_MQ_F_BLOCKING
jffs2: Fix list_del corruption if compressors initialized failed
jffs2: Use function instead of macro when initialize compressors
jffs2: fix spelling mistake "neccecary"->"necessary"
ubifs: Fix kernel-doc
ubifs: Fix some kernel-doc comments
UBI: Fastmap: Fix kernel-doc
ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
ubifs: ubifs_writepage: Mark page dirty after writing inode failed
ubifs: dirty_cow_znode: Fix memleak in error handling path
ubifs: Re-statistic cleaned znode count if commit failed
ubi: Fix permission display of the debugfs files
...
Here is the 9p patches for the 6.3 merge window combining
the tested and reviewed patches from both Dominique's
for-next tree and my for-next tree. Most of these
patches have been in for-next since December with only
some reword in the description:
- some fixes and cleanup setting up for a larger set
of performance patches I've been working on
- a contributed fixes relating to 9p/rdma
- some contributed fixes relating to 9p/xen
I've marked this as part 1, I'm not sure I'll be
submitting part 2. There were several performance
patches that I wanted to get in, but the revisions
after review only went out last week so while they
have been tested, I haven't received reviews on the
revisions.
Its been about a decade since I've submitted a pull
request, sorry if I messed anything up.
-eric
-----BEGIN PGP SIGNATURE-----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=Cvvf
-----END PGP SIGNATURE-----
Merge tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p updates from Eric Van Hensbergen:
- some fixes and cleanup setting up for a larger set of performance
patches I've been working on
- a contributed fixes relating to 9p/rdma
- some contributed fixes relating to 9p/xen
* tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: fix error reporting in v9fs_dir_release
net/9p: fix bug in client create for .L
9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
9p/xen: fix connection sequence
9p/xen: fix version parsing
fs/9p: Expand setup of writeback cache to all levels
net/9p: Adjust maximum MSIZE to account for p9 header
- Handle vendor extension and allocation entries as unrecognized benign secondary entries.
- Fix wrong ->i_blocks on devices with non-512 byte sector.
- Add the check to avoid returning -EIO from exfat_readdir() at current position exceeding the directory size.
- Fix a bug that reach the end of the directory stream at a position not aligned with the dentry size.
- Redefine DIR_DELETED as 0xFFFFFFF7, the bad cluster number.
- Two cleanup fixes and fix cluster leakage in error handling.
-----BEGIN PGP SIGNATURE-----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=AbjH
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Handle vendor extension and allocation entries as unrecognized benign
secondary entries
- Fix wrong ->i_blocks on devices with non-512 byte sector
- Add the check to avoid returning -EIO from exfat_readdir() at current
position exceeding the directory size
- Fix a bug that reach the end of the directory stream at a position
not aligned with the dentry size
- Redefine DIR_DELETED as 0xFFFFFFF7, the bad cluster number
- Two cleanup fixes and fix cluster leakage in error handling
* tag 'exfat-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix the newly allocated clusters are not freed in error handling
exfat: don't print error log in normal case
exfat: remove unneeded code from exfat_alloc_cluster()
exfat: handle unreconized benign secondary entries
exfat: fix inode->i_blocks for non-512 byte sector size device
exfat: redefine DIR_DELETED as the bad cluster number
exfat: fix reporting fs error when reading dir beyond EOF
exfat: fix unexpected EOF while reading dir
The value shown by power1_max_interval in millisec is essentially:
((1.x * power(2,y)) * 1000) >> 10
Where x and y are read from a HW register. On ATSM, x and y are 0 on
power-up so the value shown is 0.
Writes of 0 to power1_max_interval had previously been disallowed to avoid
computing ilog2(0) but this resulted in the corner-case bug
below. Therefore allow writes of 0 now but special case that write to
x = y = 0.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7754
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228044334.3630391-1-ashutosh.dixit@intel.com
If the ruleset contains consumed quota, restore them accordingly.
Otherwise, listing after restoration shows never used items.
Restore the user-defined quota and flags too.
Fixes: ed0a0c60f0 ("netfilter: nft_quota: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the ruleset contains last timestamps, restore them accordingly.
Otherwise, listing after restoration shows never used items.
Fixes: 33a24de37e ("netfilter: nft_last: move stateful fields out of expression data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.
Before the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
ERROR: inet port rewrite
After the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
PASS: inet port rewrite without l3 address
Fixes: 282e5f8fe9 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use the generic suballocation helper for radeon.
v3:
- Select the suballoc helper in Kconfig (Thomas).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-4-thomas.hellstrom@linux.intel.com
Now that we have a generic suballocation helper, Use it in amdgpu.
For lines that get moved or changed, also fix up pre-existing style issues.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-3-thomas.hellstrom@linux.intel.com
Suballocating a buffer object is something that is not driver-specific
and useful for many drivers.
Use a slightly modified version of amdgpu_sa.c
v2:
- Style cleanups.
- Added / Modified documentation.
- Use u64 for the sizes and offset. The code dates back to 2012 and
using unsigned int will probably soon come back to bite us.
We can consider size_t as well for better 32-bit efficiency.
- Add and document gfp, intr and align arguments to drm_suballoc_new().
- Use drm_printer for debug output.
v3:
- Remove stale author info (Christian König)
v4:
- Avoid 64-bit integer divisions (kernel test robot <lkp@intel.com>)
- Use size_t rather than u64 for the managed range. (Thomas)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-2-thomas.hellstrom@linux.intel.com
The "window2" delay is just the difference of vactive
(undelayed vblank) vs. vblank_start (delayed vblank).
Just use vblank_start during the VRR calculations so
that things work correctly regardless of whether delayed
vblank is used or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127173044.24108-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Grab the HDR DPCD refresh timeout (time we need to wait after
writing the sourc OUI before the HDR DPCD registers are ready)
from the VBT.
Windows doesn't even seem to have any default value for this,
which is perhaps a bit weird since the VBT value is documented
as TGL+ and I thought the HDR backlight stuff might already be
used on earlier platforms. To play it safe I left the old
hardcoded 30ms default in place. Digging through some internal
stuff that seems to have been a number given by the vendor for
one particularly slow TCON. Although I did see 50ms mentioned
somewhere as well.
Let's also include the value in the debug print to ease
debugging, and toss in the customary connector id+name as well.
The TGL Thinkpad T14 I have sets this to 0 btw. So the delay
is now gone on this machine:
[CONNECTOR:308:eDP-1] Detected Intel HDR backlight interface version 1
[CONNECTOR:308:eDP-1] Using Intel proprietary eDP backlight controls
[CONNECTOR:308:eDP-1] SDR backlight is controlled through PWM
[CONNECTOR:308:eDP-1] Using native PCH PWM for backlight control (controller=0)
[CONNECTOR:308:eDP-1] Using AUX HDR interface for backlight control (range 0..496)
[CONNECTOR:308:eDP-1] Performing OUI wait (0 ms)
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220164718.23117-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
- don't access released socket during error recovery (Akinobu Mita)
- bring back auto-removal of deleted namespaces during sequential scan
(Christoph Hellwig)
- fix an error code in nvme_auth_process_dhchap_challenge
(Dan Carpenter)
- show well known discovery name (Daniel Wagner)
- add a missing endianess conversion in effects masking (Keith Busch)
-----BEGIN PGP SIGNATURE-----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=1zfV
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.3-2022-03-01' of git://git.infradead.org/nvme into for-6.3/block
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.3
- don't access released socket during error recovery (Akinobu Mita)
- bring back auto-removal of deleted namespaces during sequential scan
(Christoph Hellwig)
- fix an error code in nvme_auth_process_dhchap_challenge
(Dan Carpenter)
- show well known discovery name (Daniel Wagner)
- add a missing endianess conversion in effects masking (Keith Busch)"
* tag 'nvme-6.3-2022-03-01' of git://git.infradead.org/nvme:
nvme-fabrics: show well known discovery name
nvme-tcp: don't access released socket during error recovery
nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
nvme: bring back auto-removal of deleted namespaces during sequential scan
nvme: fix sparse warning on effects masking
In etdm dai driver, dai_etdm_parse_of() function is used to parse dts
properties to get parameters. There are two for-loops which are
sepearately for all etdm and etdm input only cases. In etdm in only
loop, dai_id is not initialized, so it keeps the value intiliazed in
another loop.
In the patch, add the missing initialization to fix the unexpected
parsing problem.
Fixes: 1de9a54aca ("ASoC: mediatek: mt8195: support etdm in platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230301110200.26177-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In etdm dai driver, dai_etdm_parse_of() function is used to parse dts
properties to get parameters. There are two for-loops which are
sepearately for all etdm and etdm input only cases. In etdm in only
loop, dai_id is not initialized, so it keeps the value intiliazed in
another loop.
In the patch, add the missing initialization to fix the unexpected
parsing problem.
Fixes: 2babb47774 ("ASoC: mediatek: mt8188: support etdm in platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230301110200.26177-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It seems tomoyo has had its own implementation of what
kmalloc_size_roundup() does today. Remove the function tomoyo_round2()
and replace it with kmalloc_size_roundup(). It provides more accurate
results and doesn't contain a while loop.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Add support to notify tx ack signal values for management
packets to userspace through nl80211 interface.
Advertise NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT flag
to enable this feature and it will be used for data
packets as well.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Abinaya Kalaiselvan <quic_akalaise@quicinc.com>
Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221219053844.4084486-1-quic_mkenna@quicinc.com
When the police was removed from the port, then it was trying to
remove the police from the police id and not from the actual
police index.
The police id represents the id of the police and police index
represents the position in HW where the police is situated.
The port police id can be any number while the port police index
is a number based on the port chip port.
Fix this by deleting the police from HW that is situated at the
police index and not police id.
Fixes: 5390334b59 ("net: lan966x: Add port police support using tc-matchall")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the bogus csync check and replace it with something that:
- triggers for all forms of csync, not just the basic analog variant
- actually populates the mode csync flags so that drivers can
decide what to do with the mode
Originally the code tried to outright reject csync, but that
apparently broke some bogus LCD monitor that claimed to have
a detailed mode that uses analog csync, despite also claiming
the monitor only support separate sync:
https://bugzilla.redhat.com/show_bug.cgi?id=540024
Potentially that monitor should just be quirked or something.
Anyways, what we are dealing with now is some kind of funny i915
JSL machine with eDP where the panel claims to support a sensible
60Hz separate sync mode, and a 50Hz mode with bipolar analog
csync. The 50Hz mode does not work so we want to not use it.
Easiest way is to just correctly flag it as csync and the driver
will reject it.
TODO: or should we just reject any form of csync (or at least
the analog variants) for digital display interfaces?
v2: Grab digital csync polarity from hsync polarity bit (Jani)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8146
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228213610.26283-1-ville.syrjala@linux.intel.com
After the abandonment of i915->kernel_context and since we have started to
create per-gt engine->kernel_context, these tests need to be updated to
instantiate the batch buffer VMA in the correct PPGTT for the context used
to execute each spinner.
v2(Tejas):
- Clean commit message - Matt
- Add BUG_ON to match vm
v3(Tejas):
- Fix dim checkpatch warnings
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228044307.191639-1-tejas.upadhyay@intel.com
The data structure struct ast_private represents an AST device. Its
name comes from the time when it was allocated and stored separately
in struct drm_device.dev_private. The DRM device is now embedded, so
rename struct ast_private to struct ast_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-4-tzimmermann@suse.de
Ast defines a number of I/O helpers for accessing hardware. Only 4 of
the many generated functions are actually used. Replace the respective
generator macros with those 4 functions. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-3-tzimmermann@suse.de
Replace one call to ast_io_write16() with two calls to ast_io_write8()
in ast_set_index_reg(). The combined 16-bit-wide write of an index
register and the corresponding data register only works on little-
endian systems. Write both registers independent from each other.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-2-tzimmermann@suse.de
Commit
47894e0fa6 ("virt/sev-guest: Prevent IV reuse in the SNP guest driver")
changed the behavior associated with the return value when the caller
does not supply a large enough certificate buffer. Prior to the commit a
value of -EIO was returned. Now, 0 is returned. This breaks the
established ABI with the user.
Change the code to detect the buffer size error and return -EIO.
Fixes: 47894e0fa6 ("virt/sev-guest: Prevent IV reuse in the SNP guest driver")
Reported-by: Larry Dewey <larry.dewey@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Larry Dewey <larry.dewey@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/2afbcae6daf13f7ad5a4296692e0a0fe1bc1e4ee.1677083979.git.thomas.lendacky@amd.com
Smatch reports that 'ci' can be used uninitialized.
The current code ignores errno coming from tcf_idr_check_alloc, which
will lead to the incorrect usage of 'ci'. Handle the errno as it should.
Fixes: 288864effe ("net/sched: act_connmark: transition to percpu stats and rcu")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Zbb optimized strncmp has two parts; a fast path that does XLEN/8B
per iteration, and a slow that does one byte per iteration.
The idea is to compare aligned XLEN chunks for most of strings, and do
the remainder tail in the slow path.
The Zbb strncmp has two issues in the fast path:
Incorrect remainder handling (wrong compare): Assume that the string
length is 9. On 64b systems, the fast path should do one iteration,
and one iteration in the slow path. Instead, both were done in the
fast path, which lead to incorrect results. An example:
strncmp("/dev/vda", "/dev/", 5);
Correct by changing "bgt" to "bge".
Missing NULL checks in the second string: This could lead to incorrect
results for:
strncmp("/dev/vda", "/dev/vda\0", 8);
Correct by adding an additional check.
Fixes: b6fcdb191e ("RISC-V: add zbb support to string functions")
Suggested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230228184211.1585641-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Fix a deadlock in the free space allocator due to the AG-walking
algorithm forgetting to follow AG-order locking rules.
* Make the inode allocator prefer existing free inodes instead of
failing to allocate new inode chunks when free space is low.
* Set minleft correctly when setting allocator parameters for bmap
changes.
* Fix uninitialized variable access in the getfsmap code.
* Make a distinction between active and passive per-AG structure
references. For now, active references are taken to perform some
work in an AG on behalf of a high level operation; passive references
are used by lower level code to finish operations started by other
threads. Eventually this will become part of online shrink.
* Split out all the different allocator strategies into separate
functions to move us away from design antipattern of filling out a
huge structure for various differentish things and issuing a single
function multiplexing call.
* Various cleanups in the filestreams allocator code, which we might
very well want to deprecate instead of continuing.
* Fix a bug with the agi rotor code that was introduced earlier in this
series.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCY/zgqgAKCRBKO3ySh0YR
plIkAQDIscqdqXGH01gF19/ncqG2GUaXY+/zeOReuk1Iv3VEVgD+MVXf+QvHk7LD
/LTWNl2K6NQmE/9RtaBt0aFNDzvIAgU=
=k7r8
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull moar xfs updates from Darrick Wong:
"This contains a fix for a deadlock in the allocator. It continues the
slow march towards being able to offline AGs, and it refactors the
interface to the xfs allocator to be less indirection happy.
Summary:
- Fix a deadlock in the free space allocator due to the AG-walking
algorithm forgetting to follow AG-order locking rules
- Make the inode allocator prefer existing free inodes instead of
failing to allocate new inode chunks when free space is low
- Set minleft correctly when setting allocator parameters for bmap
changes
- Fix uninitialized variable access in the getfsmap code
- Make a distinction between active and passive per-AG structure
references. For now, active references are taken to perform some
work in an AG on behalf of a high level operation; passive
references are used by lower level code to finish operations
started by other threads. Eventually this will become part of
online shrink
- Split out all the different allocator strategies into separate
functions to move us away from design antipattern of filling out a
huge structure for various differentish things and issuing a single
function multiplexing call
- Various cleanups in the filestreams allocator code, which we might
very well want to deprecate instead of continuing
- Fix a bug with the agi rotor code that was introduced earlier in
this series"
* tag 'xfs-6.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (44 commits)
xfs: restore old agirotor behavior
xfs: fix uninitialized variable access
xfs: refactor the filestreams allocator pick functions
xfs: return a referenced perag from filestreams allocator
xfs: pass perag to filestreams tracing
xfs: use for_each_perag_wrap in xfs_filestream_pick_ag
xfs: track an active perag reference in filestreams
xfs: factor out MRU hit case in xfs_filestream_select_ag
xfs: remove xfs_filestream_select_ag() longest extent check
xfs: merge new filestream AG selection into xfs_filestream_select_ag()
xfs: merge filestream AG lookup into xfs_filestream_select_ag()
xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c
xfs: use xfs_bmap_longest_free_extent() in filestreams
xfs: get rid of notinit from xfs_bmap_longest_free_extent
xfs: factor out filestreams from xfs_bmap_btalloc_nullfb
xfs: convert trim to use for_each_perag_range
xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker
xfs: move the minimum agno checks into xfs_alloc_vextent_check_args
xfs: fold xfs_alloc_ag_vextent() into callers
xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno()
...
