punit_ddr_dvfs_enable() is only used on CHT devices and there dmesg
gets filled with: "DDR DVFS, door bell is not cleared within 3ms"
messages, so clearly the doorbell checking is not working.
This check was added by:
https://github.com/intel/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/cam-0340-atomisp-add-door-bell-for-ddr-dvfs-on-cht.patch
Which commit message says: "PUNIT interface added to check Req_ACK
of freq status". This suggests that the doorbell mechanism may only
be available with certain PUNIT fw versions and it seems that
many CHT devices do not have this fw version; that or the doorbell
mechanism is not working for other reasons.
Revert cam-0340-atomisp-add-door-bell-for-ddr-dvfs-on-cht.patch,
replacing the doorbell check with a msleep(20) this fixes dmesg
getting filled with error messages.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
These are clearly debug messages, printing these all the time is not
useful.
Silence these by simply removing them altogether.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The atomisp does not use standard PCI power-management through the
PCI config space. Instead this driver directly tells the P-Unit to
disable the ISP over the IOSF. The standard PCI subsystem pm_ops will
try to access the config space before (resume) / after (suspend) this
driver has turned the ISP on / off, resulting in the following errors:
Unable to change power state from D0 to D3hot, device inaccessible
Unable to change power state from D3cold to D0, device inaccessible
Getting logged into dmesg a whole bunch of time during boot as well as
every time the camera is used.
To avoid these errors use a custom pm_domain instead of standard driver
pm-callbacks so that all the PCI subsys suspend / resume handling is
skipped and call pci_save_state() / pci_restore_state() ourselves.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the atomisp_sw_contex struct, it has only 1 member: running_freq,
instead store running_freq directly.
While at it also change running_freq from an int to an unsigned int,
all values stored in it are unsigned and it is compared to the also
unsigned new_freq variable.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Crystal Cove PMIC used on some BYT/CHT devices has different revisions
when paired with Bay Trail (BYT) vs Cherry Trail (CHT) SoCs.
The current hardcoded values are only valid for CHT devices, change
the code so that it uses the correct register values on both BYT and CHT.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Check buffer index is in range inside atomisp_qbuf_wrapper() before
using it do index pipe->frame_request_config_id[].
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The videobuf2-core expects buffers to be put back in the queued state
when the vb2 start_streaming callback fails. But the atomisp
atomisp_flush_video_pipe() would unconditionally return them to the core
in an error state.
This triggers the following warning in the videobuf2-core:
drivers/media/common/videobuf2/videobuf2-core.c:1652:
/*
* If done_list is not empty, then start_streaming() didn't call
* vb2_buffer_done(vb, VB2_BUF_STATE_QUEUED) but STATE_ERROR or
* STATE_DONE.
*/
WARN_ON(!list_empty(&q->done_list));
Fix this by adding a state argument to atomisp_flush_video_pipe() and use
VB2_BUF_STATE_QUEUED as state when atomisp_start_streaming() fails.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Calling v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode) when
the stream is already active (through another /dev/video# node) causes
the stream to stop.
Move the call to set the default run-mode so that it is only done
on the first open of one of the 4 /dev/video# nodes of one of
the 2 streams (atomisp-sub-devices / asd-s).
Fixes: 2c45e343c5 ("media: atomisp: set per-device's default mode")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't touch q->start_streaming_called directly, use the
vb2_start_streaming_called() function instead.
Link: https://lore.kernel.org/r/bc6c24ec-72ea-64a1-9061-311cc7339827@xs4all.nl
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The recent conversion missed the Kconfig bit, so it can now
end up in a link error on randconfig builds:
ld.lld: error: undefined symbol: vb2_vmalloc_memops
>>> referenced by atomisp_fops.c
>>> drivers/staging/media/atomisp/pci/atomisp_fops.o:(atomisp_open) in archive vmlinux.a
Link: https://lore.kernel.org/r/20230104082212.3770415-1-arnd@kernel.org
Fixes: cb48ae89be ("media: atomisp: Convert to videobuf2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the ene device is detaching, function ene_remove() will
be called. But there is no function to cancel tx_sim_timer
in ene_remove(), the timer handler ene_tx_irqsim() could race
with ene_remove(). As a result, the UAF bugs could happen,
the process is shown below.
(cleanup routine) | (timer routine)
| mod_timer(&dev->tx_sim_timer, ..)
ene_remove() | (wait a time)
| ene_tx_irqsim()
| dev->hw_lock //USE
| ene_tx_sample(dev) //USE
Fix by adding del_timer_sync(&dev->tx_sim_timer) in ene_remove(),
The tx_sim_timer could stop before ene device is deallocated.
What's more, The rc_unregister_device() and del_timer_sync()
should be called first in ene_remove() and the deallocated
functions such as free_irq(), release_region() and so on
should be called behind them. Because the rc_unregister_device()
is well synchronized. Otherwise, race conditions may happen. The
situations that may lead to race conditions are shown below.
Firstly, the rx receiver is disabled with ene_rx_disable()
before rc_unregister_device() in ene_remove(), which means it
can be enabled again if a process opens /dev/lirc0 between
ene_rx_disable() and rc_unregister_device().
Secondly, the irqaction descriptor is freed by free_irq()
before the rc device is unregistered, which means irqaction
descriptor may be accessed again after it is deallocated.
Thirdly, the timer can call ene_tx_sample() that can write
to the io ports, which means the io ports could be accessed
again after they are deallocated by release_region().
Therefore, the rc_unregister_device() and del_timer_sync()
should be called first in ene_remove().
Suggested by: Sean Young <sean@mess.org>
Fixes: 9ea53b74df ("V4L/DVB: STAGING: remove lirc_ene0100 driver")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties. The common CEC
binding expects also node name to be 'cec'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reference common HDMI CEC adapter properties to simplify the binding and
have only one place of definition for common properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move st,stm32-cec.yaml bindings to cec subfolder and drop unneeded
"bindings" in the title.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move amlogic,meson-gx-ao-cec.yaml bindings to cec subfolder and drop
unneeded quotes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the pointer variable is judged to be null, null is returned
directly.
[hverkuil: fix two checkpatch warnings]
Signed-off-by: Dong Chuanjian <chuanjian@nfschina.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Fixes: d3f756ad62 ("media: v4l2: Trace calculated p/b0/b1 initial reflist")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Hantro driver uses a hardcoded value for the bus_info field in the
media device and |struct v4l2_capability|. This worked well when there
was just one device. However with the iMX.8 series we are now seeing
two Hantro blocks on the same chip. The static bus_info is no longer
sufficient for differentiating devices.
Since commit f2d8b6917f ("media: v4l: ioctl: Set bus_info in
v4l_querycap()"), the V4L2 core provides a default value for the
bus_info field for platform and PCI devices. This value will match
the default value for media devices added by commit cef699749f
("media: mc: Set bus_info in media_device_init()"). These defaults
are stable and device-specific.
Drop the static bus_info values from the hantro driver and use the
defaults.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
pm_runtime_put will set RPM_ASYNC flag then queue an idle-notification
request again, won't return error immediately until current request is
scheduled.
But pm_runtime_put_sync run the ->runtime_idle() callback directly, return
error immediately no matter whether current request is scheduled.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
in the E.2.1 of Rec. ITU-T H.264 (06/2019),
0 of colour primaries is reserved, and 2 is unspecified.
driver can map V4L2_COLORSPACE_LAST to 0,
and map V4L2_COLORSPACE_DEFAULT to 2.
v4l2_xfer_func and v4l2_ycbcr_encoding are similar case.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
using the api of clk_bulk can simplify the code.
and the clock of the jpeg codec may be changed,
the clk_bulk api can be compatible with the future change.
Fixes: 4c2e5156d9 ("media: imx-jpeg: Add pm-runtime support for imx-jpeg")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now that fscrypt_add_test_dummy_key() is only called by
setup_file_encryption_key() and not by the individual filesystems,
un-export it. Also change its prototype to take the
fscrypt_key_specifier directly, as the caller already has it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-6-ebiggers@kernel.org
Now that the key associated with the "test_dummy_operation" mount option
is added on-demand when it's needed, rather than immediately when the
filesystem is mounted, fscrypt_destroy_keyring() no longer needs to be
called from __put_super() to avoid a memory leak on mount failure.
Remove this call, which was causing confusion because it appeared to be
a sleep-in-atomic bug (though it wasn't, for a somewhat-subtle reason).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-5-ebiggers@kernel.org
Now that fs/crypto/ adds the test dummy encryption key on-demand when
it's needed, there's no need for individual filesystems to call
fscrypt_add_test_dummy_key(). Remove the call to it from f2fs.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-4-ebiggers@kernel.org
Now that fs/crypto/ adds the test dummy encryption key on-demand when
it's needed, there's no need for individual filesystems to call
fscrypt_add_test_dummy_key(). Remove the call to it from ext4.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-3-ebiggers@kernel.org
When the key for an inode is not found but the inode is using the
test_dummy_encryption policy, automatically add the
test_dummy_encryption key to the filesystem keyring. This eliminates
the need for all the individual filesystems to do this at mount time,
which is a bit tricky to clean up from on failure.
Note: this covers the call to fscrypt_find_master_key() from inode key
setup, but not from the fscrypt ioctls. So, this isn't *exactly* the
same as the key being present from the very beginning. I think we can
tolerate that, though, since the inode key setup caller is the only one
that actually matters in the context of test_dummy_encryption.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230208062107.199831-2-ebiggers@kernel.org
Don't populate the const arrays on the stack, instead make them
static. Also makes the object code smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix a smatch report for the newly added nvme_auth_wq.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Don't populate the read-only const array DURATION on the stack but
instead make it static. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
At present, the function imx_media_fim_set_stream() always returns 0.
So, convert it to be a function returning void instead. Issue identified
using the returnvar.cocci Coccinelle semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Since 79c987de8b, enumerating framesize on format set with "MODE_NONE"
(any raw formats) is reporting an invalid frmsize.
Size: Stepwise 0x0 - 0x0 with step 0/0
Before this change, the driver would return EINVAL, which is also invalid
but worked in GStreamer. The original intent was not to implement it, hence
the -ENOTTY return in this change. While drivers should implement
ENUM_FRMSIZE for all formats and queues, this change is limited in scope to
fix the regression.
This fixes taking picture in Gnome Cheese software, or any software using
GSteamer to encode JPEG with hardware acceleration.
Fixes: 79c987de8b ("media: hantro: Use post processor scaling capacities")
Reported-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The void * type pointer does not need to be cast.
Signed-off-by: Zhou jie <zhoujie@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The legal identifier of APP14 is "Adobe\0",
but sometimes it may be
"This is an unknown APP marker . Compliant decoders must ignore it."
In this case, just ignore it.
It won't affect the decode result.
Fixes: b8035f7988 ("media: Add parsing for APP14 data segment in jpeg helpers")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The curr pointer has advanced 14 bytes in jpeg_parse_app14_data.
1. jpeg_get_word_be(stream), it goes forward 2 bytes.
2. jpeg_skip(stream, 11), it goes forward 11 bytes.
3. jpeg_get_byte(stream), it goes forward 1 bytes.
so the remain bytes of this segment should be (lp - 2 - 11 - 1),
but not (lp - 2 - 11).
if driver skip 1 extra bytes, the following parsing may go wrong.
Fixes: b8035f7988 ("media: Add parsing for APP14 data segment in jpeg helpers")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The new mdp3 driver uses 'select' to force-enable a couple of drivers
it depends on. This is error-prone and likely to cause dependency
loops as well as warnings like:
WARNING: unmet direct dependencies detected for VIDEO_MEDIATEK_VPU
Depends on [n]: MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_MEM2MEM_DRIVERS [=n] && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y])
Selected by [m]:
- VIDEO_MEDIATEK_MDP3 [=m] && MEDIA_SUPPORT [=m] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && (MTK_IOMMU [=m] || COMPILE_TEST [=y]) && VIDEO_DEV [=m] && (ARCH_MEDIATEK [=y] || COMPILE_TEST [=y]) && HAS_DMA [=y] && REMOTEPROC [=y]
This specific warning was already addressed in a previous patch,
but there are similar unnecessary 'select' statements, so turn those
into 'depends on'. This also means the dependency on ARCH_MEDIATEK
is redundant and can be dropped.
Fixes: 61890ccaef ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Fixes: 9195a860ef ("media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU config")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Marking a case of the switch statement as unreachable means the
compiler treats it as undefined behavior, which is then caught by
an objtool warning:
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.o: warning: objtool: csiphy_lanes_enable() falls through to next function csiphy_lanes_disable()
Instead of simply continuing execution at a random place of the
driver, print a warning and return from to the caller, which
makes it possible to understand what happens and avoids the
warning.
Fixes: 53655d2a0f ("media: camss: csiphy-3ph: add support for SM8250 CSI DPHY")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-06 (ice)
This series contains updates to ice driver only.
Ani removes WQ_MEM_RECLAIM flag from workqueue to resolve
check_flush_dependency warning.
Michal fixes KASAN out-of-bounds warning.
Brett corrects behaviour for port VLAN Rx filters to prevent receiving
of unintended traffic.
Dan Carpenter fixes possible off by one issue.
Zhang Changzhong adjusts error path for switch recipe to prevent memory
leak.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: switch: fix potential memleak in ice_add_adv_recipe()
ice: Fix off by one in ice_tc_forward_to_queue()
ice: Fix disabling Rx VLAN filtering with port VLAN enabled
ice: fix out-of-bounds KASAN warning in virtchnl
ice: Do not use WQ_MEM_RECLAIM flag for workqueue
====================
Link: https://lore.kernel.org/r/20230206232934.634298-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On some platforms, 100/1000/2500 speeds seem to have sometimes problems
reporting false positive tx unit hang during stressful UDP traffic. Likely
other Intel drivers introduce responses to a tx hang. Update the 'tx hang'
comparator with the comparison of the head and tail of ring pointers and
restore the tx_timeout_factor to the previous value (one).
This can be test by using netperf or iperf3 applications.
Example:
iperf3 -s -p 5001
iperf3 -c 192.168.0.2 --udp -p 5001 --time 600 -b 0
netserver -p 16604
netperf -H 192.168.0.2 -l 600 -p 16604 -t UDP_STREAM -- -m 64000
Fixes: b27b8dc77b ("igc: Increase timeout value for Speed 100/1000/2500")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230206235818.662384-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: various virtualization cleanups
Jacob Keller says:
This series contains a variety of refactors and cleanups in the VF code for
the ice driver. Its primary focus is cleanup and simplification of the VF
operations and addition of a few new operations that will be required by
Scalable IOV, as well as some other refactors needed for the handling of VF
subfunctions.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: remove unnecessary virtchnl_ether_addr struct use
ice: introduce .irq_close VF operation
ice: introduce clear_reset_state operation
ice: convert vf_ops .vsi_rebuild to .create_vsi
ice: introduce ice_vf_init_host_cfg function
ice: add a function to initialize vf entry
ice: Pull common tasks into ice_vf_post_vsi_rebuild
ice: move ice_vf_vsi_release into ice_vf_lib.c
ice: move vsi_type assignment from ice_vsi_alloc to ice_vsi_cfg
ice: refactor VSI setup to use parameter structure
ice: drop unnecessary VF parameter from several VSI functions
ice: fix function comment referring to ice_vsi_alloc
ice: Add more usage of existing function ice_get_vf_vsi(vf)
====================
Link: https://lore.kernel.org/r/20230206214813.20107-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After calling irq_set_affinity_and_hint(), the cpumask pointer is
saved in desc->affinity_hint, and will be used later when reading
/proc/irq/<num>/affinity_hint. So the cpumask variable needs to be
persistent. Otherwise, we are accessing freed memory when reading
the affinity_hint file.
Also, need to clear affinity_hint before free_irq(), otherwise there
is a one-time warning and stack trace during module unloading:
[ 243.948687] WARNING: CPU: 10 PID: 1589 at kernel/irq/manage.c:1913 free_irq+0x318/0x360
...
[ 243.948753] Call Trace:
[ 243.948754] <TASK>
[ 243.948760] mana_gd_remove_irqs+0x78/0xc0 [mana]
[ 243.948767] mana_gd_remove+0x3e/0x80 [mana]
[ 243.948773] pci_device_remove+0x3d/0xb0
[ 243.948778] device_remove+0x46/0x70
[ 243.948782] device_release_driver_internal+0x1fe/0x280
[ 243.948785] driver_detach+0x4e/0xa0
[ 243.948787] bus_remove_driver+0x70/0xf0
[ 243.948789] driver_unregister+0x35/0x60
[ 243.948792] pci_unregister_driver+0x44/0x90
[ 243.948794] mana_driver_exit+0x14/0x3fe [mana]
[ 243.948800] __do_sys_delete_module.constprop.0+0x185/0x2f0
To fix the bug, use the persistent mask, cpumask_of(cpu#), and set
affinity_hint to NULL before freeing the IRQ, as required by free_irq().
Cc: stable@vger.kernel.org
Fixes: 71fa6887ee ("net: mana: Assign interrupts to CPUs based on NUMA nodes")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/1675718929-19565-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit ff9fb72bc0 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.
Fixes: ff9fb72bc0 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmPiWbYTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6HT3CACcKiUxmkFfS3I2MUCLt+spz2/4q3cG
+MX8m03fzSU8efdKN1ckUOmQfsPp2RNP7NSeI/Anu83oka40zFuejC/Dfg9V1SBF
EKD39VIWQTuPcYJP4GlxqKTkDHSVsA5iN/4vxzCFpp7C6LR3h2f0bTwj6SA44IvD
eatH6Vzr/Y1rG6Yj27hZzFpC8HXqHzaIcC1UJpODqNTmhrux/hskem0XqH68VQXK
FRi8K7xHgIs4MonamWGJj/oz1NkbEje3xvT4nZRkaMLgZY0prTQfJetSDaGwkBci
WJmqJ15PpBRedDpdTIeXkZK8U95BWt/gZEp28XwgkohP6A8DsilJFS7F
=Tcyi
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.2-20230207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
can 2023-02-07
The patch is from Devid Antonio Filoni and fixes an address claiming
problem in the J1939 CAN protocol.
* tag 'linux-can-fixes-for-6.2-20230207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: do not wait 250 ms if the same addr was already claimed
====================
Link: https://lore.kernel.org/r/20230207140514.2885065-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
