This driver relies on SMEM to populate items for each subsystem before
the device probes. The items in SMEM that are being looked for are
populated by the subsystems lazily, and therefore may not exist until
the device has booted. For example, if I build this driver into the
kernel on Trogdor Lazor and boot up, I don't see a 'modem' debugfs file
populated, because the modem boots and populates the SMEM item after
this driver probes.
Always populate the files for the subsystems if they're in SMEM, and
make the qcom_subsystem_sleep_stats_show() function return 0 if the SMEM
items still isn't there. This way we can run a simple command like
grep ^ /sys/kernel/debug/qcom_stats/*
and collect the subsystem sleep stats without interspersed errors or
missing details entirely because this driver probed first.
Fixes: 1d77246903 ("soc: qcom: Add Sleep stats driver")
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119032329.2909383-1-swboyd@chromium.org
QMI is a network protocol, so anything using requires CONFIG_NET
to be enabled as well:
WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS
Depends on [n]: NET [=n]
Selected by [m]:
- QCOM_PDR_HELPERS [=m]
arm-linux-gnueabi-ld: drivers/soc/qcom/qmi_interface.o: in function `qmi_send_new_lookup':
qmi_interface.c:(.text+0xf0): undefined reference to `kernel_sendmsg'
Add the dependency to both QCOM_PDR_HELPERS and QCOM_PMIC_GLINK to make
it clearly what the dependency is when another PDR user is added.
pmic_glink also needs CONFIG_OF:
drivers/soc/qcom/pmic_glink_altmode.c: In function 'pmic_glink_altmode_probe':
drivers/soc/qcom/pmic_glink_altmode.c:418:33: error: 'struct drm_bridge' has no member named 'of_node'
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206193804.191343-1-arnd@kernel.org
The page_fault_test KVM selftest requires userfaultfd but the config
fragment for the KVM selftests does not enable it, meaning that those tests
are skipped in CI systems that rely on appropriate settings in the config
fragments except on S/390 which happens to have it in defconfig. Enable
the option in the config fragment so that the tests get run.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230202-kvm-selftest-userfaultfd-v1-1-8186ac5a33a5@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The documentation table added in a36afe7804 ("usb: gadget: uvc: Add
new enable_interrupt_ep attribute") was incorrect, resulting in a new
warning when compiling the documentation.
Correct the formatting to resolve the warning.
Fixes: a36afe7804 ("usb: gadget: uvc: Add new enable_interrupt_ep attribute")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206151131.863960-1-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The stm32 nvmem driver fails to link as built-in when OPTEE
is a loadable module:
aarch64-linux-ld: drivers/nvmem/stm32-bsec-optee-ta.o: in function `stm32_bsec:
stm32-bsec-optee-ta.c:(.text+0xc8): undefined reference to `tee_client_open_session'
aarch64-linux-ld: drivers/nvmem/stm32-bsec-optee-ta.o: in function `stm32_bsec:
stm32-bsec-optee-ta.c:(.text+0x1fc): undefined reference to `tee_client_open_context'
Change the CONFIG_NVMEM_STM32_ROMEM definition so it can only
be built-in if OPTEE is either built-in or disabled, and
make NVMEM_STM32_BSEC_OPTEE_TA a hidden symbol instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-23-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document IPQ8074 compatible for QFPROM, its compatible with the generic
QFPROM fallback.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-22-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are currently no in-tree users of the Qualcomm SDAM nvmem driver
and there is generally no point in registering a driver that can be
built as a module at subsys init time.
Register the driver at the normal device init time instead and let
driver core sort out the probe order.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-21-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On STM32MP15x SoC, the SMC backend is optional when OP-TEE is used;
the PTA BSEC should be used as it is done on STM32MP13x platform,
but the BSEC SMC can be also used: it is a legacy mode in OP-TEE,
not recommended but used in previous OP-TEE firmware.
The presence of OP-TEE is dynamically detected in STM32MP15x device tree
and the supported NVMEM backend is dynamically detected:
- PTA with stm32_bsec_pta_find
- SMC with stm32_bsec_check
With OP-TEE but without PTA and SMC detection, the probe is deferred for
STM32MP15x devices.
On STM32MP13x platform, only the PTA is supported with cfg->ta = true
and this detection is skipped.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-19-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For boot with OP-TEE on STM32MP13, the communication with the secure
world no more use STMicroelectronics SMC but communication with the
STM32MP BSEC TA, for data access (read/write) or lock operation:
- all the request are sent to OP-TEE trusted application,
- for upper OTP with ECC protection and with word programming only
each OTP are permanently locked when programmed to avoid ECC error
on the second write operation
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-18-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert nvmem_add_cells_from_of() to use the new nvmem_add_one_cell().
This will remove duplicate code and it will make it possible to add a
hook to a nvmem layout in between, which can change fields before the
cell is finally added.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-17-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new function to add exactly one cell. This will be used by the
nvmem layout drivers to add custom cells. In contrast to the
nvmem_add_cells(), this has the advantage that we don't have to assemble
a list of cells on runtime.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-16-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If nvmem_add_cells() fails, the whole nvmem_register() will fail
and the cells will then be removed anyway. This is a preparation
to introduce a nvmem_add_one_cell() which can then be used by
nvmem_add_cells().
This is then the same to what nvmem_add_cells_from_table() and
nvmem_add_cells_from_of() do.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-15-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct nvmem_cell_info is used to describe a cell. Thus this should
really be in the nvmem-provider's header. There are two (unused) nvmem
access methods which use the nvmem_cell_info to describe the cell to be
accesses. One can argue, that they will create a cell before accessing,
thus they are both a provider and a consumer.
struct nvmem_cell_info will get used more and more by nvmem-providers,
don't force them to also include the consumer header, although they are
not.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes a cell can represend multiple values. For example, a base
ethernet address stored in the NVMEM can be expanded into multiple
discreet ones by adding an offset.
For this use case, introduce an index parameter which is then used to
distiguish between values. This parameter will then be passed to the
post process hook which can then use it to create different values
during reading.
At the moment, there is only support for the device tree path. You can
add the index to the phandle, e.g.
&net {
nvmem-cells = <&base_mac_address 2>;
nvmem-cell-names = "mac-address";
};
&nvmem_provider {
base_mac_address: base-mac-address@0 {
#nvmem-cell-cells = <1>;
reg = <0 6>;
};
};
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bindings describe the new '#nvmem-cell-cells' property. Now that the
arguments count property is optional, we just add this property to the
nvmem-cells.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes, future bindings for phandles will get additional arguments.
Thus the target node of the phandle will need a new #.*-cells property.
To be backwards compatible, this needs to be optional.
Prepare the DEFINE_SIMPLE_PROPS() to handle the cells name as optional.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new variant of the of_parse_phandle_with_args() which treats the
cells name as optional. If it's missing, it is assumed that the phandle
has no arguments.
Up until now, a nvmem node didn't have any arguments, so all the device
trees haven't any '#*-cells' property. But there is a need for an
additional argument for the phandle, for which we need a '#*-cells'
property. Therefore, we need to support nvmem nodes with and without
this property.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper to add an offset to a ethernet address. This comes in handy
if you have a base ethernet address for multiple interfaces.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove a spurious white space in for the ida_alloc() call.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is some configuration in SDM670's QFPROM. Add the compatible for
it.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the SRAM readout code is fixed by using 32-bit accesses, it
always returns the same values as register readout, so the A64 variant
no longer needs the workaround. This makes the D1 variant structure
redundant, so remove it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Perf BPF filter test fails in environment where "kernel-debuginfo"
is not installed.
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : FAILED!
<<>>
Enabling verbose option provided debug logs, which says debuginfo
needs to be installed. Snippet of verbose logs:
<<>>
42.3: BPF prologue generation :
--- start ---
test child forked, pid 28218
<<>>
Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo
package.
bpf_probe: failed to convert perf probe events
Failed to add events selected by BPF
test child finished with -1
---- end ----
BPF filter subtest 3: FAILED!
<<>>
Here the subtest "BPF prologue generation" failed and logs shows
debuginfo is needed. After installing kernel-debuginfo package, testcase
passes.
The "BPF prologue generation" subtest failed because, the do_test()
returns TEST_FAIL without checking the error type returned by
parse_events_load_bpf_obj().
parse_events_load_bpf_obj() can also return error of type -ENODATA
incase kernel-debuginfo package is not installed. Fix this by adding
check for -ENODATA error.
Test result after the patch changes:
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Skip (clang/debuginfo isn't installed or environment missing BPF support)
<<>>
Fixes: ba1fae431e ("perf test: Add 'perf test BPF'")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/linux-perf-users/Y7bIk77mdE4j8Jyi@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Here are the interconnect changes for the 6.3-rc1 merge window with the
significant part being new drivers.
Driver changes:
- New driver for Qualcomm SM8550
- New driver for Qualcomm QDU1000/QRU1000
- New driver for Qualcomm SDM670
- New driver for Qualcomm SA8775P
- Drop the IP0 interconnects and migrate them to RPMh clocks instead
- Misc improvements in the DT schema for some existing drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/mVV
-----END PGP SIGNATURE-----
Merge tag 'icc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.3
Here are the interconnect changes for the 6.3-rc1 merge window with the
significant part being new drivers.
Driver changes:
- New driver for Qualcomm SM8550
- New driver for Qualcomm QDU1000/QRU1000
- New driver for Qualcomm SDM670
- New driver for Qualcomm SA8775P
- Drop the IP0 interconnects and migrate them to RPMh clocks instead
- Misc improvements in the DT schema for some existing drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (25 commits)
dt-bindings: interconnect: samsung,exynos-bus: allow opp-table
dt-bindings: interconnect: qcom,sa8775p-rpmh: fix a typo
dt-bindings: interconnect: Exclude all non msm8939 from snoc-mm
interconnect: qcom: add a driver for sa8775p
dt-bindings: interconnect: qcom: document the interconnects for sa8775p
interconnect: qcom: add sdm670 interconnects
dt-bindings: interconnect: add sdm670 interconnects
dt-bindings: interconnect: OSM L3: Add SM6350 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: document SM8550 compatibles
dt-bindings: interconnect: split SM8450 to own schema
dt-bindings: interconnect: split SC8280XP to own schema
dt-bindings: interconnect: split SC7280 to own schema
dt-bindings: interconnect: qcom: drop IPA_CORE related defines
dt-bindings: interconnect: qcom: Remove ipa-virt compatibles
interconnect: qcom: sc8280xp: Drop IP0 interconnects
interconnect: qcom: sc8180x: Drop IP0 interconnects
interconnect: qcom: sm8250: Drop IP0 interconnects
interconnect: qcom: sm8150: Drop IP0 interconnects
interconnect: move ignore_list out of of_count_icc_providers()
interconnect: qcom: sc7180: drop IP0 remnants
...
try_to_find_probe_trace_events() uses return error code as ENOENT in two
places.
First place is after open_debuginfo() when opening debuginfo fails and
secondly, after when not finding the probe point.
This function is invoked during BPF load and there are other exit points
in this code path which returns ENOENT. This makes it difficult to
understand the exact reason for exit.
Patches changes the exit code from ENOENT to:
- ENODATA when it fails to find debuginfo
- ENODEV when it fails to find probe point
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230105121742.92249-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multiple Ideapad Z570 variants need acpi_backlight=native to force native
use on these pre Windows 8 machines since acpi_video backlight control
does not work here.
The original DMI quirk matches on a product_name of "102434U" but other
variants may have different product_name-s such as e.g. "1024D9U".
Move to checking product_version instead as is more or less standard for
Lenovo DMI quirks for similar reasons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In arch_perf_synthesize_sample_weight(), the retire_lat was mistakenly
missed, add it.
perf test -v "x86 sample parsing"
74: x86 Sample parsing :
--- start ---
test child forked, pid 72526
Samples differ at 'retire_lat'
parsing failed for sample_type 0x1000000
test child finished with -1
---- end ----
x86 Sample parsing: FAILED!
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230206162100.3329395-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- the incorrect value returned by cpufreq driver's ->get() callback for
Qualcomm platforms (Douglas Anderson).
-----BEGIN PGP SIGNATURE-----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=Wvnb
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull an ARM cpufreq fix for 6.2-rc8 from Viresh Kumar:
- Fix the incorrect value returned by cpufreq driver's ->get() callback for
Qualcomm platforms (Douglas Anderson).
* tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
The dev_lan_addr and hw_lan_addr members of ice_vf are used only to store
the MAC address for the VF. They are defined using virtchnl_ether_addr, but
only the .addr sub-member is actually used. Drop the use of
virtchnl_ether_addr and just use a u8 array of length [ETH_ALEN].
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The Scalable IOV implementation will require notifying the VDCM driver when
an IRQ must be closed. This allows the VDCM to handle releasing stale IRQ
context values and properly reconfigure.
To handle this, introduce a new optional .irq_close callback to the VF
operations structure. This will be implemented by Scalable IOV to handle
the shutdown of the IRQ context.
Since the SR-IOV implementation does not need this, we must check that its
non-NULL before calling it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When hardware is reset, the VF relies on the VFGEN_RSTAT register to detect
when the VF is finished resetting. This is a tri-state register where 0
indicates a reset is in progress, 1 indicates the hardware is done
resetting, and 2 indicates that the software is done resetting.
Currently the PF driver relies on the device hardware resetting VFGEN_RSTAT
when a global reset occurs. This works ok, but it does mean that the VF
might not immediately notice a reset when the driver first detects that the
global reset is occurring.
This is also problematic for Scalable IOV, because there is no read/write
equivalent VFGEN_RSTAT register for the Scalable VSI type. Instead, the
Scalable IOV VFs will need to emulate this register.
To support this, introduce a new VF operation, clear_reset_state, which is
called when the PF driver first detects a global reset. The Single Root IOV
implementation can just write to VFGEN_RSTAT to ensure it's cleared
immediately, without waiting for the actual hardware reset to begin. The
Scalable IOV implementation will use this as part of its tracking of the
reset status to allow properly reporting the emulated VFGEN_RSTAT to the VF
driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The .vsi_rebuild function exists for ice_reset_vf. It is used to release
and re-create the VSI during a single-VF reset.
This function is only called when we need to re-create the VSI, and not
when rebuilding an existing VSI. This makes the single-VF reset process
different from the process used to restore functionality after a
hardware reset such as the PF reset or EMP reset.
When we add support for Scalable IOV VFs, the implementation will be very
similar. The primary difference will be in the fact that each VF type uses
a different underlying VSI type in hardware.
Move the common functionality into a new ice_vf_recreate VSI function. This
will allow the two IOV paths to share this functionality. Rework the
.vsi_rebuild vf_op into .create_vsi, only performing the task of creating a
new VSI.
This creates a nice dichotomy between the ice_vf_rebuild_vsi and
ice_vf_recreate_vsi, and should make it more clear why the two flows atre
distinct.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce a new generic helper ice_vf_init_host_cfg which performs common
host configuration initialization tasks that will need to be done for both
Single Root IOV and the new Scalable IOV implementation.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some of the initialization code for Single Root IOV VFs will need to be
reused when we introduce Scalable IOV. Pull this code out into a new
ice_initialize_vf_entry helper function.
Co-developed-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The Single Root IOV implementation of .post_vsi_rebuild performs some tasks
that will ultimately need to be shared with the Scalable IOV implementation
such as rebuilding the host configuration.
Refactor by introducing a new wrapper function, ice_vf_post_vsi_rebuild
which performs the tasks that will be shared between SR-IOV and Scalable
IOV. Move the ice_vf_rebuild_host_cfg and ice_vf_set_initialized calls into
this wrapper. Then call the implementation specific post_vsi_rebuild
handler afterwards.
This ensures that we will properly re-initialize filters and expected
settings for both SR-IOV and Scalable IOV.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vf_vsi_release function will be used in a future change to
refactor the .vsi_rebuild function. Move this over to ice_vf_lib.c so
that it can be used there.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vsi_alloc and ice_vsi_cfg functions are used together to allocate
and configure a new VSI, called as part of the ice_vsi_setup function.
In the future with the addition of the subfunction code the ice driver
will want to be able to allocate a VSI while delaying the configuration to
a later point of the port activation.
Currently this requires that the port code know what type of VSI should
be allocated. This is required because ice_vsi_alloc assigns the VSI type.
Refactor the ice_vsi_alloc and ice_vsi_cfg functions so that VSI type
assignment isn't done until the configuration stage. This will allow the
devlink port addition logic to reserve a VSI as early as possible before
the type of the port is known. In this way, the port add can fail in the
event that all hardware VSI resources are exhausted.
Since the ice_vsi_cfg function already takes the ice_vsi_cfg_params
structure, this is relatively straight forward.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vsi_setup function, ice_vsi_alloc, and ice_vsi_cfg functions have
grown a large number of parameters. These parameters are used to initialize
a new VSI, as well as re-configure an existing VSI
Any time we want to add a new parameter to this function chain, even if it
will usually be unset, we have to change many call sites due to changing
the function signature.
A future change is going to refactor ice_vsi_alloc and ice_vsi_cfg to move
the VSI configuration and initialization all into ice_vsi_cfg.
Before this, refactor the VSI setup flow to use a new ice_vsi_cfg_params
structure. This will contain the configuration (mainly pointers) used to
initialize a VSI.
Pass this from ice_vsi_setup into the related functions such as
ice_vsi_alloc, ice_vsi_cfg, and ice_vsi_cfg_def.
Introduce a helper, ice_vsi_to_params to convert an existing VSI to the
parameters used to initialize it. This will aid in the flows where we
rebuild an existing VSI.
Since we also pass the ICE_VSI_FLAG_INIT to more functions which do not
need (or cannot yet have) the VSI parameters, lets make this clear by
renaming the function parameter to vsi_flags and using a u32 instead of a
signed integer. The name vsi_flags also makes it clear that we may extend
the flags in the future.
This change will make it easier to refactor the setup flow in the future,
and will reduce the complexity required to add a new parameter for
configuration in the future.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The vsi->vf pointer gets assigned early on during ice_vsi_alloc. Several
functions currently take a VF pointer, but they can just use the existing
vsi->vf pointer as needed. Modify these functions to drop the unnecessary
VF parameter.
Note that ice_vsi_cfg is not changed as a following change will refactor so
that the VF pointer is assigned during ice_vsi_cfg rather than
ice_vsi_alloc.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Since commit 1d2e32275de7 ("ice: split ice_vsi_setup into smaller
functions") ice_vsi_alloc has not been responsible for all of the behavior
implied by the comment for ice_vsi_setup_vector_base.
Fix the comment to refer to the new function ice_vsi_alloc_def().
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Extend the usage of function ice_get_vf_vsi(vf) in multiple places
instead of VF's VSI by using a long string of dereferences
(i.e. vf->pf->vsi[vf->lan_vsi_idx]).
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Kalyan Kodamagula <kalyan.kodamagula@intel.com>
Tested-by: Piotr Tyda <piotr.tyda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* irq/misc-6.3:
: .
: - Cleanup Kconfig dependencies for LS_SCFG_MSI
:
: - Improve save/restore for the loongson-liointc irqchip
:
: - Correctly initialise status and enable registers for one
: of the ASpeed controllers
: .
irqchip/ls-scfg-msi: Simplify Kconfig dependencies
irqchip/loongson-liointc: Save/restore int_edge/int_pol registers during S3/S4
irqchip/aspeed-scu-ic: Correctly initialise status and enable registers
Signed-off-by: Marc Zyngier <maz@kernel.org>
