Take into account whether or not the AGP aperture is
enabled or not when calculating the system aperture.
Fixes white screens with DCN 3.1.4.
Based on a patch from Yifan Zhang <yifan1.zhang@amd.com>
Cc: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Accessing GRBM_GFX_CNTL in full access time has risk when VF is doing MMIO attacking.
Therefore, VF writing GRBM_GFX_CNTL are blocked by L1 Policy.
For RLCG interface, RLCG use SCRATCH_REG2 which is copied from GRBM_GFX_CNTL.
[How]
Remove writing GRBM_GFX_CNTL in amdgpu_virt_rlcg_reg_rw.
v2:
Remove directly writing GRBM_GFX_INDEX in amdgpu_virt_rlcg_reg_rw
as RLCG interface no need to use it.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We allow sending PSP messages LOAD_ASD and UNLOAD_TA without
acquiring a lock in drm_dev_enter during driver unload
because we must call drm_dev_unplug as the beginning
of unload driver sequence.
Added WARNING if other PSP messages are sent without a lock.
After this commit, the following commands would work
-sudo modprobe -r amdgpu
-sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a very trivial code clean-up related to commit 5468c36d62
("drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS"). This commit
added a validation on driver probe to prevent invalid TMDS modes, but one
of the fake properties (swizzle) ended-up causing a warning on driver
probe; was reported here: https://gitlab.freedesktop.org/drm/amd/-/issues/2264.
It was fixed by commit a1cbe6916f ("drm/amd/display: patch cases with
unknown plane state to prevent warning"), but the validation code had
a double variable assignment, which we hereby remove. Also, the fix relies
in the dcn2{0,1}patch_unknown_plane_state() callbacks, so while at it we
took the opportunity to perform a small code clean-up in such routines.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sung Joon Kim <Sungjoon.Kim@amd.com>
Cc: Swapnil Patel <Swapnil.Patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cppcheck reports
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: style:
Expression is always true because 'else if' condition is opposite to previous condition at line 1396. [multiCondition]
} else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {
^
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1396:69: note: first condition
if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type != SUBVP_PHANTOM) {
^
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: note: else if condition is opposite to first condition
} else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {
It is not necessary to explicitly the check != condition, an else is simplier.
Fixes: 238debcaeb ("drm/amd/display: Use DML for MALL SS and Subvp allocation calculations")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
checkpatch reports
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: style:
Expression is always true because 'else if' condition is opposite to previous condition at line 2895. [multiCondition]
} else if (blank) {
^
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2895:6: note: first condition
if (!blank) {
^
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: note: else if condition is opposite to first condition
} else if (blank) {
It is not necessary to explicitly the check != condition, an else is simplier.
Fixes: aa5a577730 ("drm/amd/display: Vari-bright looks disabled near end of MM14")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Retire Latency field is added in the var3_w of the
PERF_SAMPLE_WEIGHT_STRUCT. The Retire Latency reports the number of
elapsed core clocks between the retirement of the instruction indicated
by the Instruction Pointer field of the PEBS record and the retirement
of the prior instruction. That's quite useful to display the information
with perf script.
Add a new field retire_lat for the Retire Latency information.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20230104201349.1451191-9-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Retire Latency field is added in the var3_w of the
PERF_SAMPLE_WEIGHT_STRUCT. The Retire Latency reports pipeline stall of
this instruction compared to the previous instruction in cycles. That's
quite useful to display the information with perf mem report.
The p_stage_cyc for Power is also from the var3_w. Union the p_stage_cyc
and retire_lat to share the code.
Implement X86 specific codes to display the X86 specific header.
Add a new sort key retire_lat for the Retire Latency.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20230104201349.1451191-8-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be useful to filter other than the current aggregation mode. For
example, users may want to see callstacks for specific locks only. Or
they may want tasks from a certain callstack.
The tracepoints already collected the information but it needs to check
the condition again when processing the event. And it needs to change
BPF to allow the key combinations.
The lock contentions on 'rcu_state' spinlock can be monitored:
$ sudo perf lock con -abv -L rcu_state sleep 1
...
contended total wait max wait avg wait type caller
4 151.39 us 62.57 us 37.85 us spinlock rcu_core+0xcb
0xffffffff81fd1666 _raw_spin_lock_irqsave+0x46
0xffffffff8172d76b rcu_core+0xcb
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc0112 sysvec_apic_timer_interrupt+0xa2
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
0xffffffff81d49f78 cpuidle_enter_state+0xd8
0xffffffff81d4a259 cpuidle_enter+0x29
1 30.21 us 30.21 us 30.21 us spinlock rcu_core+0xcb
0xffffffff81fd1666 _raw_spin_lock_irqsave+0x46
0xffffffff8172d76b rcu_core+0xcb
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc00c4 sysvec_apic_timer_interrupt+0x54
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
1 28.84 us 28.84 us 28.84 us spinlock rcu_accelerate_cbs_unlocked+0x40
0xffffffff81fd1c60 _raw_spin_lock+0x30
0xffffffff81728cf0 rcu_accelerate_cbs_unlocked+0x40
0xffffffff8172da82 rcu_core+0x3e2
0xffffffff822000eb __softirqentry_text_start+0xeb
0xffffffff816a0ba9 __irq_exit_rcu+0xc9
0xffffffff81fc0112 sysvec_apic_timer_interrupt+0xa2
0xffffffff82000e46 asm_sysvec_apic_timer_interrupt+0x16
0xffffffff81d49f78 cpuidle_enter_state+0xd8
...
To see tasks calling 'rcu_core' function:
$ sudo perf lock con -abt -S rcu_core sleep 1
contended total wait max wait avg wait pid comm
19 23.46 us 2.21 us 1.23 us 0 swapper
2 18.37 us 17.01 us 9.19 us 2061859 ThreadPoolForeg
3 5.76 us 1.97 us 1.92 us 3909 pipewire-pulse
1 2.26 us 2.26 us 2.26 us 1809271 MediaSu~isor #2
1 1.97 us 1.97 us 1.97 us 1514882 Chrome_ChildIOT
1 987 ns 987 ns 987 ns 3740 pipewire-pulse
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230203021324.143540-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation work to support complex keys of BPF maps. Now it
has single value key according to the aggregation mode like stack_id or
pid. But we want to use a combination of those keys.
Then lock_contention_read() should still aggregate the result based on
the key that was requested by user. The other key info will be used for
filtering.
So instead of creating a lock_stat entry always, Check if it's already
there using lock_stat_find() first.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230203021324.143540-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The lock_contention_get_name() returns a name for the lock stat entry
based on the current aggregation mode. As it's called sequentially in a
single thread, it can return the address of a static buffer for symbol
and offset of the caller.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230203021324.143540-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arm SPEv1.2 adds a new optional address packet type: previous branch
target. The recorded address is the target virtual address of the most
recently taken branch in program order.
Add support for decoding the address packet in raw dumps.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230203162401.132931-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a target that generates a log file for running metric_test.py and
make this a dependency on generating pmu-events.c. The log output is
displayed if the test fails like (the test was modified to make it
fail):
```
TEST /tmp/perf/pmu-events/metric_test.log
F......
======================================================================
FAIL: test_Brackets (__main__.TestMetricExpressions)
----------------------------------------------------------------------
Traceback (most recent call last):
File "tools/perf/pmu-events/metric_test.py", line 33, in test_Brackets
self.assertEqual((a * b + c).ToPerfJson(), 'a * b + d')
AssertionError: 'a * b + c' != 'a * b + d'
- a * b + c
? ^
+ a * b + d
? ^
----------------------------------------------------------------------
Ran 7 tests in 0.004s
FAILED (failures=1)
make[3]: *** [pmu-events/Build:32: /tmp/perf/pmu-events/metric_test.log] Error 1
```
However, normal execution will just show the TEST line.
This is roughly modeled on fortify testing in the kernel lib directory.
Modify metric_test.py so that it is executable. This is necessary when
PYTHON isn't specified in the build, the normal case.
Use variables to make the paths to files clearer and more consistent.
Committer notes:
Add pmu-events/metric_test.log to tools/perf/.gitignore and to the
'clean' target on tools/perf/Makefile.perf.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-16-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a small amount of emulation to vfio_compat to accept the SET_IOMMU to
VFIO_NOIOMMU_IOMMU and have vfio just ignore iommufd if it is working on a
no-iommu enabled device.
Move the enable_unsafe_noiommu_mode module out of container.c into
vfio_main.c so that it is always available even if VFIO_CONTAINER=n.
This passes Alex's mini-test:
https://github.com/awilliam/tests/blob/master/vfio-noiommu-pci-device-open.c
Link: https://lore.kernel.org/r/0-v3-480cd64a16f7+1ad0-iommufd_noiommu_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=/+rE
-----END PGP SIGNATURE-----
Merge tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A bit bigger than I'd like at this point, but mostly a bunch of little
fixes. In detail:
- NVMe pull request via Christoph:
- Fix a missing queue put in nvmet_fc_ls_create_association
(Amit Engel)
- Clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- Use workqueue dedicated to authentication (Shin'ichiro
Kawasaki)
- Fix for an overflow in ublk (Liu)
- Fix for leaking a queue reference in block cgroups (Ming)
- Fix for a use-after-free in BFQ (Yu)"
* tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux:
blk-cgroup: don't update io stat for root cgroup
nvme-auth: use workqueue dedicated to authentication
nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
block: Fix the blk_mq_destroy_queue() documentation
block: ublk: extending queue_size to fix overflow
block, bfq: fix uaf for bfqq in bic_set_bfqq()
The MIPI phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DisplayPort phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The MIPI phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DisplayPort phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The SCMI protocol child nodes are missing any constraints on unknown
properties. Specifically, either 'unevaluatedProperties' or
'additionalProperties' is needed. The current structure with a regex
match for all child nodes doesn't work for this purpose, so let's move
the common properties '$defs' entry which each specific protocol node
can reference and set 'unevaluatedProperties: false'.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230124222023.316089-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
filesystem after running into a case of an invalid snap trace. The
root cause of this metadata corruption is still being investigated but
it appears to be stemming from the MDS. As such, this is the best we
can do for now.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmPdTX4THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi7upB/4+UFJT7GQyd6Co1gQ83iQhq7pqHlZ2
K0CTOrp1ffqvCxHo4vDqW6SM/C825qeIQzVyvTP0/gpax3jo2NfV0RBxa+mXS8aI
JkeOQ8DQCi35BT0bp9JnmLPEWfhcJBK7G4jZyCsUf+47GrzPyMtSdmU2Xv+heig1
e0YjaUtUxv8l5bSGq7clIf44p++SAhT2L2z5iwMfq3YHpYmFKCKGRbpRCPoLANsh
PG85zxpz7zjViY1/bCM/DAq1c/ZiqcwxcmToJgKug/4tvHtOGWnZa1t0oO7rtUE9
BslkL4BwT0uBtIILiWC5JG617mhjQaXazF6i1C1W7mGf/CXXWROkS9/9
=s3LU
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A safeguard to prevent the kernel client from further damaging the
filesystem after running into a case of an invalid snap trace.
The root cause of this metadata corruption is still being investigated
but it appears to be stemming from the MDS. As such, this is the best
we can do for now"
* tag 'ceph-for-6.2-rc7' of https://github.com/ceph/ceph-client:
ceph: blocklist the kclient when receiving corrupted snap trace
ceph: move mount state enum to super.h
* A build fix to avoid static branches in cpu_relax(), which greatly
inflates the jump tables and breaks at least
CONFIG_CC_OPTIMIZE_FOR_SIZE=y.
* A fix for a kernel panic when probing impossible instruction
positions.
* A fix to disable unwind tables, which are enabled by default for
GCC-13 and result in unhandled relocations in modules.
-----BEGIN PGP SIGNATURE-----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=tZzK
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A build fix to avoid static branches in cpu_relax(), which greatly
inflates the jump tables and breaks at least
CONFIG_CC_OPTIMIZE_FOR_SIZE=y.
- A fix for a kernel panic when probing impossible instruction
positions.
- A fix to disable unwind tables, which are enabled by default for
GCC-13 and result in unhandled relocations in modules.
* tag 'riscv-for-linus-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: disable generation of unwind tables
riscv: kprobe: Fixup kernel panic when probing an illegal position
riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
dma-fence:
- fix signaling bit for private fences
panel:
- boe-tv101wum-nl6 disable fix
nouveau:
- gm20b acr regression fix
- tu102 scrub status fix
- tu102 wait for firmware fix
i915:
- Fixes for potential use-after-free and double-free
- GuC locking and refcount fixes
- Display's reference clock value fix
amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
vc4:
- fix CEC adapter names
ssd130x:
- fix display init regression
-----BEGIN PGP SIGNATURE-----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=uX5h
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A few more fixes this week, a bit more spread out though.
We have a bunch of nouveau regression and stabilisation fixes, along
with usual amdgpu, and i915. Otherwise just some minor misc ones:
dma-fence:
- fix signaling bit for private fences
panel:
- boe-tv101wum-nl6 disable fix
nouveau:
- gm20b acr regression fix
- tu102 scrub status fix
- tu102 wait for firmware fix
i915:
- Fixes for potential use-after-free and double-free
- GuC locking and refcount fixes
- Display's reference clock value fix
amdgpu:
- GC11 fixes
- DCN 3.1.4 fixes
- NBIO 4.3 fix
- DCN 3.2 fixes
- Properly handle additional cases where DCN is not supported
- SMU13 fixes
vc4:
- fix CEC adapter names
ssd130x:
- fix display init regression"
* tag 'drm-fixes-2023-02-03' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/amd/display: Properly handle additional cases where DCN is not supported
drm/amdgpu: Enable vclk dclk node for gc11.0.3
drm/amd: Fix initialization for nbio 4.3.0
drm/amdgpu: enable HDP SD for gfx 11.0.3
drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11
drm/amd/display: Reset DMUB mailbox SW state after HW reset
drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2
drm/amd/display: Adjust downscaling limits for dcn314
drm/amd/display: Add missing brackets in calculation
drm/amdgpu: update wave data type to 3 for gfx11
drm/panel: boe-tv101wum-nl6: Ensure DSI writes succeed during disable
drm/nouveau/acr/gm20b: regression fixes
drm/nouveau/fb/tu102-: fix register used to determine scrub status
drm/nouveau/devinit/tu102-: wait for GFW_BOOT_PROGRESS == COMPLETED
drm/i915/adlp: Fix typo for reference clock
drm/i915: Fix potential bit_17 double-free
drm/i915: Fix up locking around dumping requests lists
drm/i915: Fix request ref counting during error capture & debugfs dump
drm/i915/guc: Fix locking when searching for a hung request
drm/i915: Avoid potential vm use-after-free
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY9x+swAKCRDdBJ7gKXxA
joPwAP95XqB7gzy2l1Mc++Ta7Ih0fS34Pj1vTAxwsRQnqzr6rwD/QOt3YU9KgXpy
D7Fp8NnaQZq6m5o8cvV5+fBqA3uarAM=
=IIB8
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"25 hotfixes, mainly for MM. 13 are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-02-19-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath()
Kconfig.debug: fix the help description in SCHED_DEBUG
mm/swapfile: add cond_resched() in get_swap_pages()
mm: use stack_depot_early_init for kmemleak
Squashfs: fix handling and sanity checking of xattr_ids count
sh: define RUNTIME_DISCARD_EXIT
highmem: round down the address passed to kunmap_flush_on_unmap()
migrate: hugetlb: check for hugetlb shared PMD in node migration
mm: hugetlb: proc: check for hugetlb shared PMD in /proc/PID/smaps
mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups
Revert "mm: kmemleak: alloc gray object for reserved region with direct map"
freevxfs: Kconfig: fix spelling
maple_tree: should get pivots boundary by type
.mailmap: update e-mail address for Eugen Hristev
mm, mremap: fix mremap() expanding for vma's with vm_ops->close()
squashfs: harden sanity check in squashfs_read_xattr_id_table
ia64: fix build error due to switch case label appearing next to declaration
mm: multi-gen LRU: fix crash during cgroup migration
Revert "mm: add nodes= arg to memory.reclaim"
zsmalloc: fix a race with deferred_handles storing
...
Call ice_unload() and ice_load() in driver reinit flow.
Block reinit when switchdev, ADQ or SRIOV is active. In reload path we
don't want to rebuild all features. Ask user to remove them instead of
quitely removing it in reload path.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_vsi_cfg() is called from different contexts:
1) VSI exsist in HW, but it is reconfigured, because of changing queues
for example -> update instead of init should be used
2) VSI doesn't exsist, because rest has happened -> init command should
be sent
To support both cases pass boolean value which will store information
what type of command has to be sent to HW.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In deconfig VSI shouldn't be deleted from hw.
Rewrite VSI delete function to reflect that sometimes it is only needed
to remove VSI from hw without freeing the memory:
ice_vsi_delete() -> delete from HW and free memory
ice_vsi_delete_from_hw() -> delete only from HW
Value returned from ice_vsi_free() is never used. Change return type to
void.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In driver reload path the netdev isn't removed, but VSI is. Remove
filters on netdev right after removing them on VSI.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Part of code from probe can be reused in reload flow. Move this code to
separate function. Create unroll functions for each part of
initialization, like: ice_init_dev() and ice_deinit_dev(). It
simplifies unrolling and can be used in remove flow.
Avoid freeing port info as it could be reused in reload path.
Will be freed in remove path since is allocated via devm_kzalloc().
Also clean the remove path to reflect the init steps.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When allocating the ICE_VSI_CTRL, the allocated struct ice_vsi pointer is
stored into the PF's pf->vsi array at a fixed location. This was
historically done on the basis that it could provide an O(1) lookup for the
special control VSI.
Since we store the ctrl_vsi_idx, we already have O(1) lookup regardless of
where in the array we store this VSI.
Simplify the logic in ice_vsi_alloc by using the same method of storing the
control VSI as other types of VSIs.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Main goal is to reuse the same functions in VSI config and rebuild
paths.
To do this split ice_vsi_setup into smaller pieces and reuse it during
rebuild.
ice_vsi_alloc() should only alloc memory, not set the default values
for VSI.
Move setting defaults to separate function. This will allow config of
already allocated VSI, for example in reload path.
The path is mostly moving code around without introducing new
functionality. Functions ice_vsi_cfg() and ice_vsi_decfg() were
added, but they are using code that already exist.
Use flag to pass information about VSI initialization during rebuild
instead of using boolean value.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Do few small cleanups:
1) Rename the function to reflect that it doesn't configure all things
related to VSI. ice_vsi_cfg_lan() better fits to what function is doing.
ice_vsi_cfg() can be use to name function that will configure whole VSI.
2) Remove unused ethtype field from VSI. There is no need to set
ethtype here, because it is never used.
3) Remove unnecessary check for ICE_VSI_CHNL. There is check for
ICE_VSI_CHNL in ice_vsi_get_qs, so there is no need to check it before
calling the function.
4) Simplify ice_vsi_alloc() call. There is no need to check the type of
VSI before calling ice_vsi_alloc(). For ICE_VSI_CHNL vf is always NULL
(ice_vsi_setup() is called with vf=NULL).
For ICE_VSI_VF or ICE_VSI_CTRL ch is always NULL and for other VSI types
ch and vf are always NULL.
5) Remove unnecessary call to ice_vsi_dis_irq(). ice_vsi_dis_irq() will
be called in ice_vsi_close() flow (ice_vsi_close() -> ice_vsi_down() ->
ice_vsi_dis_irq()). Remove unnecessary call.
6) Don't remove specific filters in release. All hw filters are removed
in ice_fltr_remove_alli(), which is always called in VSI release flow.
There is no need to remove only ethertype filters before calling
ice_fltr_remove_all().
7) Rename ice_vsi_clear() to ice_vsi_free(). As ice_vsi_clear() only
free memory allocated in ice_vsi_alloc() rename it to ice_vsi_free()
which better shows what function is doing.
8) Free coalesce param in rebuild. There is potential memory leak if
configuration of VSI lan fails. Free coalesce to avoid it.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use xa_array instead of deprecated ida to alloc id for RDMA aux driver.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Simplify probe flow by moving all RDMA related code to ice_init_rdma().
Unroll irq allocation if RDMA initialization fails.
Implement ice_deinit_rdma() and use it in remove flow.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
