In do_read_inode(), sanity_check_inode() should be called after
f2fs_init_read_extent_tree(), fix it.
Fixes: 72840cccc0 ("f2fs: allocate the extent_cache by default")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_rename() has checked CP_ERROR_FLAG, so remove redundant check
in f2fs_create_whiteout().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 2b3f056f72 moved a blk_put_queue() call from
blk_mq_destroy_queue() into its callers. Reflect this change in the
documentation block above blk_mq_destroy_queue().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Keith Busch <kbusch@kernel.org>
Fixes: 2b3f056f72 ("blk-mq: move the call to blk_put_queue out of blk_mq_destroy_queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230130211233.831613-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support to retrieve VDM attention messages and forward them to the
appropriate alt mode driver.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230126205620.3714994-2-pmalani@chromium.org
Commit 98de59bfe4 ("take calculation of final prot in
security_mmap_file() into a helper") caused ima_file_mmap() to receive the
protections requested by the application and not those applied by the
kernel.
After restoring the original MMAP_CHECK behavior, existing attestation
servers might be broken due to not being ready to handle new entries
(previously missing) in the IMA measurement list.
Restore the original correct MMAP_CHECK behavior, instead of keeping the
current buggy one and introducing a new hook with the correct behavior.
Otherwise, there would have been the risk of IMA users not noticing the
problem at all, as they would actively have to update the IMA policy, to
switch to the correct behavior.
Also, introduce the new MMAP_CHECK_REQPROT hook to keep the current
behavior, so that IMA users could easily fix a broken attestation server,
although this approach is discouraged due to potentially missing
measurements.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit 98de59bfe4 ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().
However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.
A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.
Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.
Cc: stable@vger.kernel.org
Fixes: 98de59bfe4 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Function __get_mem_detect_block() resets start and end
output parameters in case of invalid mem_detect array
index is provided. That violates the rule of sparing
the output on fail path and leads e.g to a below anomaly:
for_each_mem_detect_block(i, &start, &end)
continue;
One would expect start and end contain addresses of the
last memory block (if available), but in fact the two
will be reset to zeroes. That is not how an iterator is
expected to work.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Unbinding an I/O subchannel with a child-CCW device in disconnected
state sometimes causes a kernel-panic. The race condition was seen
mostly during testing, when setting all the CHPIDs of a device to
offline and at the same time, the unbinding the I/O subchannel driver.
The kernel-panic occurs because of double delete, the I/O subchannel
driver calls device_del on the CCW device while another device_del
invocation for the same device is in-flight. For instance, disabling
all the CHPIDs will trigger the ccw_device_remove function, which will
call a ccw_device_unregister(), which ends up calling the device_del()
which is asynchronous via cdev's todo workqueue. And unbinding the I/O
subchannel driver calls io_subchannel_remove() function which calls the
ccw_device_unregister() and device_del().
This double delete can be prevented by serializing all CCW device
registration/unregistration calls into the driver core. This patch
introduces a mutex which will be used for this purpose.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
---[ Real Memory Copy Area Start ]---
0x001bfffffffff000-0x001c000000000000 4K PTE I
---[ Kasan Shadow Start ]---
---[ Real Memory Copy Area End ]---
0x001c000000000000-0x001c000200000000 8G PMD RW NX
...
---[ Kasan Shadow End ]---
ptdump does a stable sort of markers. Move kasan markers after
memcpy real to avoid swapping.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
setup_vmem() already calls populate for all online memory regions.
pgtable_populate_end() could be removed.
Also rename pgtable_populate_begin() to pgtable_populate_init().
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit bb1520d581 ("s390/mm: start kernel with DAT enabled")
doesn't consider online memory holes due to potential memory offlining
and erroneously creates pgtables for stand-by memory, which bear RW+X
attribute and trigger a warning:
RANGE SIZE STATE REMOVABLE BLOCK
0x0000000000000000-0x0000000c3fffffff 49G online yes 0-48
0x0000000c40000000-0x0000000c7fffffff 1G offline 49
0x0000000c80000000-0x0000000fffffffff 14G online yes 50-63
0x0000001000000000-0x00000013ffffffff 16G offline 64-79
s390/mm: Found insecure W+X mapping at address 0xc40000000
WARNING: CPU: 14 PID: 1 at arch/s390/mm/dump_pagetables.c:142 note_page+0x2cc/0x2d8
Map only online memory ranges which fit within identity mapping limit.
Fixes: bb1520d581 ("s390/mm: start kernel with DAT enabled")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Historically calls to __decompress() didn't specify "out_len" parameter
on many architectures including s390, expecting that no writes beyond
uncompressed kernel image are performed. This has changed since commit
2aa14b1ab2 ("zstd: import usptream v1.5.2") which includes zstd library
commit 6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer
(#2751)"). Now zstd decompression code might store literal buffer in
the unwritten portion of the destination buffer. Since "out_len" is
not set, it is considered to be unlimited and hence free to use for
optimization needs. On s390 this might corrupt initrd or ipl report
which are often placed right after the decompressor buffer. Luckily the
size of uncompressed kernel image is already known to the decompressor,
so to avoid the problem simply specify it in the "out_len" parameter.
Link: 6a7ede3dfc
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Link: https://lore.kernel.org/r/patch-1.thread-41c676.git-41c676c2d153.your-ad-here.call-01675030179-ext-9637@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently dump_security_xattr() is used to dump security xattr value
which is larger than 64 bytes, otherwise, pr_debug() is used. In order
to remove code duplication, refactor dump_security_xattr() and call it
in all cases.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
The CS42L42 has a SoundWire interface for control and audio. This
chain of patches adds support for this.
Patches #1 .. #5 split out various changes to the existing code that
are needed for adding Soundwire. These are mostly around clocking and
supporting the separate probe and enumeration stages in SoundWire.
Patches #6 .. #8 actually adds the SoundWire handling.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
struct snd_soc_dai need to have info for playback/capture,
but it is using "playback/capture_xxx" or "tx/tx_xxx" or array.
This kind of random definition is very difficult to read.
This patch-set add helper functions and each driver use it.
And cleanup the definition.
Now that the bundle->channel_lock has been eliminated, we don't need the
dummy service bundle anymore. It's purpose was purely to provide the
channel_lock for service connections.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Change the rx_packet tracepoint to display the securityIndex from the
packet header instead of displaying the type in numeric form. There's no
need for the latter, as the display of the type in symbolic form will fall
back automatically to displaying the hex value if no symbol is available.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Set a reason when freeing a packet that has been consumed such that
dropwatch doesn't complain that it has been dropped.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
We no longer need local->defrag_sem as all DATA packet transmission is now
done from one thread, so remove it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
call->tx_buffer is now only accessed within the I/O thread (->tx_sendmsg is
the way sendmsg passes packets to the I/O thread) so there's no need to
lock around it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Now that general ACK transmission is done from the same thread as incoming
DATA packet wrangling, there's no possibility that the SACK table will be
being updated by the latter whilst the former is trying to copy it to an
ACK.
This means that we can safely rotate the SACK table whilst updating it
without having to take a lock, rather than keeping all the bits inside it
in fixed place and copying and then rotating it in the transmitter.
Therefore, simplify SACK handing by keeping track of starting point in the
ring and rotate slots down as we consume them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
call->ackr_window doesn't need to be atomic as ACK generation and ACK
transmission are now done in the same thread, so drop the atomic64 handling
and split it into two separate members.
Similarly, call->ackr_nr_unacked doesn't need to be atomic now either.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
When doing a call that has a single transmitted data packet and a massive
amount of received data packets, we only ping for one RTT sample, which
means we don't get a good reading on it.
Fix this by converting occasional IDLE ACKs into PING ACKs to elicit a
response.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
If CONFIG_AF_RXRPC_DEBUG_RX_DELAY=y, then a delay is injected between
packets and errors being received and them being made available to the
processing code, thereby allowing the RTT to be artificially increased.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Convert call->recvmsg_lock to a spinlock as it's only ever write-locked.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Shrink the tabulation in the rxrpc trace header a bit to allow for fields
with long type names that have been removed.
Signed-off-by: David Howells <dhowells@redhat.com>
Work around checkpatch warnings in the rxrpc trace header by removing
whitespace before ')' on lines defining the trace record struct.
Signed-off-by: David Howells <dhowells@redhat.com>
This was originally added for the definition of nth_page(), but we no
longer use nth_page() in this header, so we can drop the heavyweight
mm.h now.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230131050132.2627124-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Looks like kunit_test_init_section_suites(...) was messed up in a merge
conflict. This fixes it.
kunit_test_init_section_suites(...) was not updated to avoid the extra
level of indirection when .kunit_test_suites was flattened. Given no-one
was actively using it, this went unnoticed for a long period of time.
Fixes: e5857d396f ("kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites")
Signed-off-by: Brendan Higgins <brendan.higgins@linux.dev>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Martin Fernandez <martin.fernandez@eclypsium.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Due to the way we use alternatives in the irqflags code, even when
CONFIG_ARM64_PSEUDO_NMI=n, we generate unused alternative code for
pseudo-NMI management. This patch reworks the irqflags code to remove
the redundant code when CONFIG_ARM64_PSEUDO_NMI=n, which benefits the
more common case, and will permit further rework of our DAIF management
(e.g. in preparation for ARMv8.8-A's NMI feature).
Prior to this patch a defconfig kernel has hundreds of redundant
instructions to access ICC_PMR_EL1 (which should only need to be
manipulated in setup code), which this patch removes:
| [mark@lakrids:~/src/linux]% usekorg 12.1.0 aarch64-linux-objdump -d vmlinux-before-defconfig | grep icc_pmr_el1 | wc -l
| 885
| [mark@lakrids:~/src/linux]% usekorg 12.1.0 aarch64-linux-objdump -d vmlinux-after-defconfig | grep icc_pmr_el1 | wc -l
| 5
Those instructions alone account for more than 3KiB of kernel text, and
will be associated with additional alt_instr entries, padding and
branches, etc.
These redundant instructions exist because we use alternative sequences
for to choose between DAIF / PMR management in irqflags.h, and even when
CONFIG_ARM64_PSEUDO_NMI=n, those alternative sequences will generate the
code for PMR management, along with alt_instr entries. We use
alternatives here as this was necessary to ensure that we never
encounter a mismatched local_irq_save() ... local_irq_restore() sequence
in the middle of patching, which was possible to see if we used static
keys to choose between DAIF and PMR management.
Since commit:
21fb26bfb0 ("arm64: alternatives: add alternative_has_feature_*()")
... we have a mechanism to use alternatives similarly to static keys,
allowing us to write the bulk of the logic in C code while also being
able to rely on all sites being patched in one go, and avoiding a
mismatched mismatched local_irq_save() ... local_irq_restore() sequence
during patching.
This patch rewrites arm64's local_irq_*() functions to use alternative
branches. This allows for the pseudo-NMI code to be entirely elided when
CONFIG_ARM64_PSEUDO_NMI=n, making a defconfig Image 64KiB smaller, and
not affectint the size of an Image with CONFIG_ARM64_PSEUDO_NMI=y:
| [mark@lakrids:~/src/linux]% ls -al vmlinux-*
| -rwxr-xr-x 1 mark mark 137473432 Jan 18 11:11 vmlinux-after-defconfig
| -rwxr-xr-x 1 mark mark 137918776 Jan 18 11:15 vmlinux-after-pnmi
| -rwxr-xr-x 1 mark mark 137380152 Jan 18 11:03 vmlinux-before-defconfig
| -rwxr-xr-x 1 mark mark 137523704 Jan 18 11:08 vmlinux-before-pnmi
| [mark@lakrids:~/src/linux]% ls -al Image-*
| -rw-r--r-- 1 mark mark 38646272 Jan 18 11:11 Image-after-defconfig
| -rw-r--r-- 1 mark mark 38777344 Jan 18 11:14 Image-after-pnmi
| -rw-r--r-- 1 mark mark 38711808 Jan 18 11:03 Image-before-defconfig
| -rw-r--r-- 1 mark mark 38777344 Jan 18 11:08 Image-before-pnmi
Some sensitive code depends on being run with interrupts enabled or with
interrupts disabled, and so when enabling or disabling interrupts we
must ensure that the compiler does not move such code around the actual
enable/disable. Before this patch, that was ensured by the combined asm
volatile blocks having memory clobbers (and any sensitive code either
being asm volatile, or touching memory). This patch consistently uses
explicit barrier() operations before and after the enable/disable, which
allows us to use the usual sysreg accessors (which are asm volatile) to
manipulate the interrupt masks. The use of pmr_sync() is pulled within
this critical section for consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When Priority Mask Hint Enable (PMHE) == 0b1, the GIC may use the PMR
value to determine whether to signal an IRQ to a PE, and consequently
after a change to the PMR value, a DSB SY may be required to ensure that
interrupts are signalled to a CPU in finite time. When PMHE == 0b0,
interrupts are always signalled to the relevant PE, and all masking
occurs locally, without requiring a DSB SY.
Since commit:
f226650494 ("arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear")
... we handle this dynamically: in most cases a static key is used to
determine whether to issue a DSB SY, but the entry code must read from
ICC_CTLR_EL1 as static keys aren't accessible from plain assembly.
It would be much nicer to use an alternative instruction sequence for
the DSB, as this would avoid the need to read from ICC_CTLR_EL1 in the
entry code, and for most other code this will result in simpler code
generation with fewer instructions and fewer branches.
This patch adds a new ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap which is
only set when ICC_CTLR_EL1.PMHE == 0b0 (and GIC priority masking is in
use). This allows us to replace the existing users of the
`gic_pmr_sync` static key with alternative sequences which default to a
DSB SY and are relaxed to a NOP when PMHE is not in use.
The entry assembly management of the PMR is slightly restructured to use
a branch (rather than multiple NOPs) when priority masking is not in
use. This is more in keeping with other alternatives in the entry
assembly, and permits the use of a separate alternatives for the
PMHE-dependent DSB SY (and removal of the conditional branch this
currently requires). For consistency I've adjusted both the save and
restore paths.
According to bloat-o-meter, when building defconfig +
CONFIG_ARM64_PSEUDO_NMI=y this shrinks the kernel text by ~4KiB:
| add/remove: 4/2 grow/shrink: 42/310 up/down: 332/-5032 (-4700)
The resulting vmlinux is ~66KiB smaller, though the resulting Image size
is unchanged due to padding and alignment:
| [mark@lakrids:~/src/linux]% ls -al vmlinux-*
| -rwxr-xr-x 1 mark mark 137508344 Jan 17 14:11 vmlinux-after
| -rwxr-xr-x 1 mark mark 137575440 Jan 17 13:49 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -al Image-*
| -rw-r--r-- 1 mark mark 38777344 Jan 17 14:11 Image-after
| -rw-r--r-- 1 mark mark 38777344 Jan 17 13:49 Image-before
Prior to this patch we did not verify the state of ICC_CTLR_EL1.PMHE on
secondary CPUs. As of this patch this is verified by the cpufeature code
when using GIC priority masking (i.e. when using pseudo-NMIs).
Note that since commit:
7e3a57fa6c ("arm64: Document ICC_CTLR_EL3.PMHE setting requirements")
... Documentation/arm64/booting.rst specifies:
| - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
| all CPUs the kernel is executing on, and must stay constant
| for the lifetime of the kernel.
... so that should not adversely affect any compliant systems, and as
we'll only check for the absense of PMHE when using pseudo-NMIs, this
will only fire when such mismatch will adversely affect the system.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the arm64_cpu_capabilities structure for
ARM64_HAS_GIC_PRIO_MASKING open-codes the same CPU field definitions as
the arm64_cpu_capabilities structure for ARM64_HAS_GIC_CPUIF_SYSREGS, so
that can_use_gic_priorities() can use has_useable_gicv3_cpuif().
This duplication isn't ideal for the legibility of the code, and sets a
bad example for any ARM64_HAS_GIC_* definitions added by subsequent
patches.
Instead, have ARM64_HAS_GIC_PRIO_MASKING check for the
ARM64_HAS_GIC_CPUIF_SYSREGS cpucap, and add a comment explaining why
this is safe. Subsequent patches will use the same pattern where one
cpucap depends upon another.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Subsequent patches will add more GIC-related cpucaps. When we do so, it
would be nice to give them a consistent HAS_GIC_* prefix.
In preparation for doing so, this patch renames the existing
ARM64_HAS_IRQ_PRIO_MASKING cap to ARM64_HAS_GIC_PRIO_MASKING.
The cpucaps file was hand-modified; all other changes were scripted
with:
find . -type f -name '*.[chS]' -print0 | \
xargs -0 sed -i 's/ARM64_HAS_IRQ_PRIO_MASKING/ARM64_HAS_GIC_PRIO_MASKING/'
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Subsequent patches will add more GIC-related cpucaps. When we do so, it
would be nice to give them a consistent HAS_GIC_* prefix.
In preparation for doing so, this patch renames the existing
ARM64_HAS_SYSREG_GIC_CPUIF cap to ARM64_HAS_GIC_CPUIF_SYSREGS.
The 'CPUIF_SYSREGS' suffix is chosen so that this will be ordered ahead
of other ARM64_HAS_GIC_* definitions in subsequent patches.
The cpucaps file was hand-modified; all other changes were scripted
with:
find . -type f -name '*.[chS]' -print0 | \
xargs -0 sed -i
's/ARM64_HAS_SYSREG_GIC_CPUIF/ARM64_HAS_GIC_CPUIF_SYSREGS/'
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230130145429.903791-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, when CONFIG_ARM64_PTR_AUTH_KERNEL=y (and
CONFIG_UNWIND_PATCH_PAC_INTO_SCS=n), we enable pointer authentication
for all functions, including leaf functions. This isn't necessary, and
is unfortunate for a few reasons:
* Any PACIASP instruction is implicitly a `BTI C` landing pad, and
forcing the addition of a PACIASP in every function introduces a
larger set of BTI gadgets than is necessary.
* The PACIASP and AUTIASP instructions make leaf functions larger than
necessary, bloating the kernel Image. For a defconfig v6.2-rc3 kernel,
this appears to add ~64KiB relative to not signing leaf functions,
which is unfortunate but not entirely onerous.
* The PACIASP and AUTIASP instructions potentially make leaf functions
more expensive in terms of performance and/or power. For many trivial
leaf functions, this is clearly unnecessary, e.g.
| <arch_local_save_flags>:
| d503233f paciasp
| d53b4220 mrs x0, daif
| d50323bf autiasp
| d65f03c0 ret
| <calibration_delay_done>:
| d503233f paciasp
| d50323bf autiasp
| d65f03c0 ret
| d503201f nop
* When CONFIG_UNWIND_PATCH_PAC_INTO_SCS=y we disable pointer
authentication for leaf functions, so clearly this is not functionally
necessary, indicates we have an inconsistent threat model, and
convolutes the Makefile logic.
We've used pointer authentication in leaf functions since the
introduction of in-kernel pointer authentication in commit:
74afda4016 ("arm64: compile the kernel with ptrauth return address signing")
... but at the time we had no rationale for signing leaf functions.
Subsequently, we considered avoiding signing leaf functions:
https://lore.kernel.org/linux-arm-kernel/1586856741-26839-1-git-send-email-amit.kachhap@arm.com/https://lore.kernel.org/linux-arm-kernel/1588149371-20310-1-git-send-email-amit.kachhap@arm.com/
... however at the time we didn't have an abundance of reasons to avoid
signing leaf functions as above (e.g. the BTI case), we had no hardware
to make performance measurements, and it was reasoned that this gave
some level of protection against a limited set of code-reuse gadgets
which would fall through to a RET. We documented this in commit:
717b938e22 ("arm64: Document why we enable PAC support for leaf functions")
Notably, this was before we supported any forward-edge CFI scheme (e.g.
Arm BTI, or Clang CFI/kCFI), which would prevent jumping into the middle
of a function.
In addition, even with signing forced for leaf functions, AUTIASP may be
placed before a number of instructions which might constitute such a
gadget, e.g.
| <user_regs_reset_single_step>:
| f9400022 ldr x2, [x1]
| d503233f paciasp
| d50323bf autiasp
| f9408401 ldr x1, [x0, #264]
| 720b005f tst w2, #0x200000
| b26b0022 orr x2, x1, #0x200000
| 926af821 and x1, x1, #0xffffffffffdfffff
| 9a820021 csel x1, x1, x2, eq // eq = none
| f9008401 str x1, [x0, #264]
| d65f03c0 ret
| <fpsimd_cpu_dead>:
| 2a0003e3 mov w3, w0
| 9000ff42 adrp x2, ffff800009ffd000 <xen_dynamic_chip+0x48>
| 9120e042 add x2, x2, #0x838
| 52800000 mov w0, #0x0 // #0
| d503233f paciasp
| f000d041 adrp x1, ffff800009a20000 <this_cpu_vector>
| d50323bf autiasp
| 9102c021 add x1, x1, #0xb0
| f8635842 ldr x2, [x2, w3, uxtw #3]
| f821685f str xzr, [x2, x1]
| d65f03c0 ret
| d503201f nop
So generally, trying to use AUTIASP to detect such gadgetization is not
robust, and this is dealt with far better by forward-edge CFI (which is
designed to prevent such cases). We should bite the bullet and stop
pretending that AUTIASP is a mitigation for such forward-edge
gadgetization.
For the above reasons, this patch has the kernel consistently sign
non-leaf functions and avoid signing leaf functions.
Considering a defconfig v6.2-rc3 kernel built with LLVM 15.0.6:
* The vmlinux is ~43KiB smaller:
| [mark@lakrids:~/src/linux]% ls -al vmlinux-*
| -rwxr-xr-x 1 mark mark 338547808 Jan 25 17:17 vmlinux-after
| -rwxr-xr-x 1 mark mark 338591472 Jan 25 17:22 vmlinux-before
* The resulting Image is 64KiB smaller:
| [mark@lakrids:~/src/linux]% ls -al Image-*
| -rwxr-xr-x 1 mark mark 32702976 Jan 25 17:17 Image-after
| -rwxr-xr-x 1 mark mark 32768512 Jan 25 17:22 Image-before
* There are ~400 fewer BTI gadgets:
| [mark@lakrids:~/src/linux]% usekorg 12.1.0 aarch64-linux-objdump -d vmlinux-before 2> /dev/null | grep -ow 'paciasp\|bti\sc\?' | sort | uniq -c
| 1219 bti c
| 61982 paciasp
| [mark@lakrids:~/src/linux]% usekorg 12.1.0 aarch64-linux-objdump -d vmlinux-after 2> /dev/null | grep -ow 'paciasp\|bti\sc\?' | sort | uniq -c
| 10099 bti c
| 52699 paciasp
Which is +8880 BTIs, and -9283 PACIASPs, for -403 unnecessary BTI
gadgets. While this is small relative to the total, distinguishing the
two cases will make it easier to analyse and reduce this set further
in future.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230131105809.991288-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Assemblers will reject instructions not supported by a target
architecture version, and so we must explicitly tell the assembler the
latest architecture version for which we want to assemble instructions
from.
We've added a few AS_HAS_ARMV8_<N> definitions for this, in addition to
an inconsistently named AS_HAS_PAC definition, from which arm64's
top-level Makefile determines the architecture version that we intend to
target, and generates the `asm-arch` variable.
To make this a bit clearer and easier to maintain, this patch reworks
the Makefile to determine asm-arch in a single if-else-endif chain.
AS_HAS_PAC, which is defined when the assembler supports
`-march=armv8.3-a`, is renamed to AS_HAS_ARMV8_3.
As the logic for armv8.3-a is lifted out of the block handling pointer
authentication, `asm-arch` may now be set to armv8.3-a regardless of
whether support for pointer authentication is selected. This means that
it will be possible to assemble armv8.3-a instructions even if we didn't
intend to, but this is consistent with our handling of other
architecture versions, and the compiler won't generate armv8.3-a
instructions regardless.
For the moment there's no need for an CONFIG_AS_HAS_ARMV8_1, as the code
for LSE atomics and LDAPR use individual `.arch_extension` entries and
do not require the baseline asm arch to be bumped to armv8.1-a. The
other armv8.1-a features (e.g. PAN) do not require assembler support.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230131105809.991288-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The newly added zt-test program copied the pattern from the other FP
stress test programs of having a redundant _start label which is
rejected by clang, as we did in a parallel series for the other tests
remove the label so we can build with clang.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230130-arm64-fix-sme2-clang-v1-1-3ce81d99ea8f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
to boot to shell with console on these SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112210722.6234-2-quic_molvera@quicinc.com
Changing pfn on a user page table mapped entry, without first going through
break-before-make (BBM) procedure is unsafe. This just updates set_pte_at()
to intercept such changes, via an updated pgattr_change_is_safe(). This new
check happens via __check_racy_pte_update(), which has now been renamed as
__check_safe_pte_update().
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230130121457.1607675-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The mailing list at librecores.org is being shut down due to
infrastructure issues. Update the the newly created list on
vger.kernel.org.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Microcode gets reloaded late only if "1" is written to the reload file.
However, the code silently treats any other unsigned integer as a
successful write even though no actions are performed to load microcode.
Make the loader more strict to accept only "1" as a trigger value and
return an error otherwise.
[ bp: Massage commit message. ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130213955.6046-3-ashok.raj@intel.com
When SVE was initially merged we chose to export the maximum VQ in the ABI
as being 512, rather more than the architecturally supported maximum of 16.
For the ptrace tests this results in us generating a lot of test cases and
hence log output which are redundant since a system couldn't possibly
support them. Instead only check values up to the current architectural
limit, plus one more so that we're covering the constraining of higher
vector lengths.
This makes no practical difference to our test coverage, speeds things up
on slower consoles and makes the output much more managable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230111-arm64-kselftest-ptrace-max-vl-v1-1-8167f41d1ad8@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
commit e75d18cecb ("arm64: cacheinfo: Fix incorrect assignment
of signed error value to unsigned fw_level")
checks the fw_level value in init_cache_level() in case the value is
negative.
Remove this check as the error code is not returned through
fw_level anymore, and reset fw_level if acpi_get_cache_info()
failed. This allows to try fetching the cache information from
clidr_el1.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230124154053.355376-4-pierre.gondois@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd500361a9 ("ACPI: PPTT: Update acpi_find_last_cache_level()
to acpi_get_cache_info()")
updates the prototype of acpi_get_cache_info(). The cache 'levels'
is update through a pointer and not the return value of the function.
If CONFIG_ACPI_PPTT is not defined, acpi_get_cache_info() doesn't
update its *levels and *split_levels parameters and returns 0.
This can lead to a faulty behaviour.
Make acpi_get_cache_info() return an error code if CONFIG_ACPI_PPTT
is not defined.
Also,
In init_cache_level(), if no PPTT is present or CONFIG_ACPI_PPTT is
not defined, instead of aborting if acpi_get_cache_info() returns an
error code, just continue. This allows to try fetching the cache
information from clidr_el1.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230124154053.355376-3-pierre.gondois@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
