- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
-----BEGIN PGP SIGNATURE-----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=OkGG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=871y
-----END PGP SIGNATURE-----
Merge tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
* tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits)
arm64: dts: meson: add support for Radxa Zero2
dt-bindings: arm: amlogic: add support for Radxa Zero2
arm64: dts: meson: add support for BananaPi M2-Pro
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
arm64: dts: meson: bananapi-m5: convert dts to dtsi
arm64: dts: meson: bananapi-m5: remove redundant status from sound node
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
arm64: dts: meson: radxa-zero: allow usb otg mode
arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
arm64: dts: meson-g12b: move common node into new odroid.dtsi
dt-bindings: arm: amlogic: document Odroid-N2L
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
arm64: dts: meson: add audio playback to S905X-P212 dts
arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
arm64: dts: meson: move pwm_ef node in P212 dtsi
arm64: dts: meson: add Broadcom WiFi to P212 dtsi
arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
...
Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: i.MX8MP Beacon Kit, Debix Model A Board,
Verdin Yavia boards.
- Add Flexcan and ADC support for i.MX93.
- A series from Krzysztof Kozlowski to align LED node names with
dtschema and use generic node name for rave-sp.
- Move PCIe controller clock setup from board dts to SoC dtsi.
- Add clock-cells to i.MX8MP hsio-blk-ctrl device.
- Add TMU phandle to calibration data in OCOTP for i.MX8M.
- Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM.
- Drop sd-vsel-gpios from i.MX8M Verdin SoM and DHCOM SoM.
- A series from Peng Fan to improve iomuxc-gpr device for i.MX8M.
- Declare IOMMU cache-coherent page table walk feature for LS1028A and
LS1088A.
- A few small corrections and random updates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmPXKqYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4N/gf/dx6v8lsL2Y05nlqZM0CqYc1cZSdx
eW/3LV0iBjLta5BzOTL5M/IjJoZ5xvPXNUqWPEN8dSu49nllLi5jW0e5h234mBca
ZeR100K2puJt4FO/KuTzVaVmRB+cclLSY2imNUU15ehVPyhMpPQa5iFHoOrkrnUR
dyqP3IlmtnsgOTCyCMFmAqLZwjhTISMEcD8jAGBpsZrZ4XK7ulD7rwz0joJbbUec
FtvhsY+2eNvKJ+mrIovJa2uP1qjz6a7JqtXf1QFuDHozqQShObpd28Ah4eBITIab
rGKoxeuuiCuhWk8COoFCbWlguvMq6P/GwDDZrdPl+g5f/vJIrPPQ1z8CCg==
=LIfH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=t6jZ
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree change for 6.3:
- New board support: i.MX8MP Beacon Kit, Debix Model A Board,
Verdin Yavia boards.
- Add Flexcan and ADC support for i.MX93.
- A series from Krzysztof Kozlowski to align LED node names with
dtschema and use generic node name for rave-sp.
- Move PCIe controller clock setup from board dts to SoC dtsi.
- Add clock-cells to i.MX8MP hsio-blk-ctrl device.
- Add TMU phandle to calibration data in OCOTP for i.MX8M.
- Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM.
- Drop sd-vsel-gpios from i.MX8M Verdin SoM and DHCOM SoM.
- A series from Peng Fan to improve iomuxc-gpr device for i.MX8M.
- Declare IOMMU cache-coherent page table walk feature for LS1028A and
LS1088A.
- A few small corrections and random updates.
* tag 'imx-dt64-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
arm64: ls1046ardb: Use in-band-status for SFP module
arm64: dts: imx8mp-verdin: Add yavia carrier board
arm64: dts: imx8mm-verdin: Add yavia carrier board
arm64: dts: imx8q: use generic node name for rave-sp
arm64: dts: imx8mp-verdin-dev: Do not include dahlia dtsi
arm64: dts: imx8mm-verdin-dev: Do not include dahlia dtsi
arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus DHCOM SoM
arm64: dts: imx8mp: Drop sd-vsel-gpios from i.MX8M Plus Verdin SoM
arm64: dts: imx8mm: Drop sd-vsel-gpios from i.MX8M Mini Verdin SoM
arm64: dts: imx8mp: Improve bluetooth UART on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: Introduce imx8mp-beacon-kit
arm64: dts: imx8mm-evk: use correct gpio-expander compatible
arm64: dts: imx93: add ADC support
arm64: dts: imx8mp: Reorder clock to match fsl,imx6q-pcie.yaml
arm64: dts: imx8mq: Deduplicate PCIe clock-names property
arm64: dts: imx8mm: Deduplicate PCIe clock-names property
arm64: dts: verdin-imx8mp: unify gpio-key node name
arm64: dts: ls1028a: sl28: get MAC addresses from VPD
arm64: dts: freescale: Add LVDS overlay for TQMa8MPxL
arm64: dts: imx8mp: Add LCDIF2 & LDB nodes
...
Link: https://lore.kernel.org/r/20230130023947.11780-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- New board support: SK-iMX53, DHCOM i.MX6ULL based boards.
- Increase MMC maximum frequency for i.MXRT1050.
- A series from Krzysztof Kozlowski to align LED node names with
dtschema, and use use generic node name for rave-sp device.
- Use new media bus type macros for i.MX device trees.
- A series from Marcel Ziswiler to improve gpio-key for Colibri and
Apalis device trees.
- A series from Marek Vasut to drop interrupt-names from dma-apb device.
- A series from Philippe Schenker to disable USB over-current for
Colibri and Apalis boards.
- A few other small corrections and random changes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmPXJMsUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM42WggAioylsMA3X2/Wq8m19Gwm49Xc8DGa
Fi12vlbkQy08LUFPH7/2vrE2AvhHcgc9MNnOTOyKBtG3ihqvFPFem3t15BZ8qdrt
O30qJYX9+uJf5dA3CI2UodNVSXTbuZifDxil9OPFzkYZDCxR/v620R/EfVwlWEH+
QFEqxOmsTFkELTXeHzpw1y+DbaVt3SMRNxXiZfBvY0J7vXEyMu7BsAKeR+IXyjfV
LYg8TZO9cB53axeikvv/Ebx1F5SCfb3OB9k/qDC20cBM7ENeZkTDweOs7OME17OB
r6ROTmP0E452o5/yyU6Ib1dgjolrd+Cl9HMjY/qaotw0KqDCG62tP4wk1g==
=Rwqo
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=1aTN
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm device tree change for 6.3:
- New board support: SK-iMX53, DHCOM i.MX6ULL based boards.
- Increase MMC maximum frequency for i.MXRT1050.
- A series from Krzysztof Kozlowski to align LED node names with
dtschema, and use use generic node name for rave-sp device.
- Use new media bus type macros for i.MX device trees.
- A series from Marcel Ziswiler to improve gpio-key for Colibri and
Apalis device trees.
- A series from Marek Vasut to drop interrupt-names from dma-apb device.
- A series from Philippe Schenker to disable USB over-current for
Colibri and Apalis boards.
- A few other small corrections and random changes.
* tag 'imx-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits)
ARM: dts: imx6ull-dhcom: Add DHSOM based DRC02 board
ARM: dts: imx6ull-dhcom: Add DHCOM based PicoITX board
ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board
ARM: dts: imx7s: correct iomuxc gpr mux controller cells
ARM: dts: imx: use generic node name for rave-sp
ARM: dts: ls1021a: Disable CAN nodes by default
ARM: dts: apalis/colibri-imx6/6ull/7: proper gpio-key node names
ARM: dts: colibri-imx6ull: improve wake-up with gpio key
ARM: dts: colibri-imx6: improve wake-up with gpio key
ARM: dts: imx: e70k02: Add touchscreen
ARM: dts: vfxxx: Swap SAI DMA order
ARM: dts: freescale: Use new media bus type macros
ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible
ARM: dts: imx: Add support for SK-iMX53 board
ARM: dts: imx7s: Drop dma-apb interrupt-names
ARM: dts: imx6ul: Drop dma-apb interrupt-names
ARM: dts: imx6sx: Drop dma-apb interrupt-names
ARM: dts: imx6qdl: Drop dma-apb interrupt-names
ARM: dts: mxs: Drop dma-apb interrupt-names
ARM: dts: imx6qdl: use MAC-address from nvmem
...
Link: https://lore.kernel.org/r/20230130023947.11780-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board compatibles: Beacon EmbeddedWorks i.MX8M Plus kit,
DHCOM PDK2, PicoITX and DRC02, Enumerate Debix, Starterkit SK-iMX53,
verdin yavia carrier-board.
- Add vendor prefix for Polyhex Technology Co.
- A series from Krzysztof Kozlowski to fix up fsl,imx-gpc bindings.
- Add clock cells for imx8mp-hsio-blk-ctrl bindings.
- A series from Marek Vasut to shuffle i.MX8MM board entries.
- A couple changes from Stefan Wahren to update compatibles for i.MX28
based boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmPXHOQUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6glgf/a3qSfIg5wGK3C0KEXqWzFfWIFRUk
ya3idK8x4rvCKEau4MpTZTQSW0o4+BuMMD/A0p+Eaz4y+vGeMNMNelD8lPhc1JuF
zxaatveiydrPFxRiKSUc3EE+RCtDLcJnqPSAcvX4Lzl0RAdVg8P+VjWMliWt5ZL1
iDkRA2xYkmkkzBmPzaShZyZ+o/d4r1r3hrqUwRu7SYsJwWGX5lT3DLZtafVciVFp
RbHTxKM7cQiboXZvj667LynUqdjrkrxjX5Bz24xxyKWL7omgwYWHyTYd6HLqkksQ
5GpVC+Dmo4gWaXuDbHIPn55utSdUhDChmaRGANPuXmyQPSLIin5yY+jgkw==
=+USu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pCXd
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings for 6.3:
- New board compatibles: Beacon EmbeddedWorks i.MX8M Plus kit,
DHCOM PDK2, PicoITX and DRC02, Enumerate Debix, Starterkit SK-iMX53,
verdin yavia carrier-board.
- Add vendor prefix for Polyhex Technology Co.
- A series from Krzysztof Kozlowski to fix up fsl,imx-gpc bindings.
- Add clock cells for imx8mp-hsio-blk-ctrl bindings.
- A series from Marek Vasut to shuffle i.MX8MM board entries.
- A couple changes from Stefan Wahren to update compatibles for i.MX28
based boards.
* tag 'imx-bindings-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add verdin yavia carrier-board
dt-bindings: arm: fsl: Add PDK2, PicoITX and DRC02 boards for the DHCOM i.MX6ULL SoM
dt-bindings: arm: Document the rest of i.MX28 based boards
dt-bindings: arm: fsl: Fix bindings for APF28Dev board
dt-bindings: power: fsl,imx-gpc: document interrupt-controller
dt-bindings: power: fsl,imx-gpc: correct compatibles
dt-bindings: power: fsl,imx-gpc: document fsl,imx6ul-gpc compatible
dt-bindings: arm: Add Beacon EmbeddedWorks i.MX8M Plus kit
dt-bindings: arm: Move i.MX8MM Cloos PHG Board to TQM entry
dt-bindings: arm: Split i.MX8M Plus DHCOM based boards
dt-bindings: arm: Split i.MX8M Mini NITROGEN SoM based boards
dt-bindings: arm: Move MX8Menlo board to i.MX8M Mini Toradex Verdin SoM entry
dt-bindings: soc: imx: add IOMUXC GPR support
dt-bindings: arm: fsl: Add the Starterkit SK-iMX53 board
dt-bindings: vendor-prefixes: add Startkit
dt-bindings: soc: imx8mp-hsio-blk-ctrl: add clock cells
dt-bindings: arm: fsl: Enumerate Debix Model A Board
dt-bindings: vendor-prefixes: Add Polyhex Technology Co.
Link: https://lore.kernel.org/r/20230130023947.11780-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.18+
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
1. Drop deprecated "device_type" property from serial nodes (apm,
amazon).
2. Align UART node names and OPP table names with bindings (hisilicon,
realtek, synaptics).
3. Use "okay" for status, as expected by Devicetree specification and
dtschema.
-----BEGIN PGP SIGNATURE-----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=LXgB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CEON
-----END PGP SIGNATURE-----
Merge tag 'dt64-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into arm/dt
Minor improvements in ARM64 DTS for v6.3, part two
1. Drop deprecated "device_type" property from serial nodes (apm,
amazon).
2. Align UART node names and OPP table names with bindings (hisilicon,
realtek, synaptics).
3. Use "okay" for status, as expected by Devicetree specification and
dtschema.
* tag 'dt64-cleanup-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: amd: use "okay" for status
arm64: dts: apm: use "okay" for status
arm64: dts: microchip: use "okay" for status
arm64: dts: synaptics: align UART node name with bindings
arm64: dts: hisilicon: align UART node name with bindings
arm64: dts: realtek: align UART node name with bindings
arm64: dts: amazon: drop deprecated serial device_type
arm64: dts: apm: drop deprecated serial device_type
Link: https://lore.kernel.org/r/20230129144525.5802-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Big cleanup and rework towards achieving zero-warning of dtbs_check and
dtc W=1:
- drop or correct incorrect properties in several boards,
- add dummy regulator supplies when necessary to fullfil bindings
requirements,
- use lowercase hex,
- move non-MMIO exynos-bus nodes out of soc node,
- add unit address to USB DWC3 nodes.
-----BEGIN PGP SIGNATURE-----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=TL0k
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=0qaJ
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v6.3, part two
Big cleanup and rework towards achieving zero-warning of dtbs_check and
dtc W=1:
- drop or correct incorrect properties in several boards,
- add dummy regulator supplies when necessary to fullfil bindings
requirements,
- use lowercase hex,
- move non-MMIO exynos-bus nodes out of soc node,
- add unit address to USB DWC3 nodes.
* tag 'samsung-dt64-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7
arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433
arm64: dts: exynos: move exynos-bus nodes out of soc in Exynos5433
arm64: dts: exynos: use lowercase hex addresses
arm64: dts: exynos: correct wlf,micd-dbtime on TM2
arm64: dts: exynos: add interrupt-controller to WM5110 on TM2
arm64: dts: exynos: add VPH_PWR regulator on TM2
arm64: dts: exynos: correct Bluetooth LED triger on E850-96
arm64: dts: exynos: add ADC supply on Exynos7 Espresso
arm64: dts: exynos: disable non-working GPU on Exynos7 Espresso
arm64: dts: exynos: drop unsupported UFS properties in ExynosAutov9 SADK
Link: https://lore.kernel.org/r/20230129143944.5104-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
6.3, please pull the following:
- Krzysztof aligns the SMMMU Device Tree nodes to use the desired
regular expression matched by the dtschema and he also removes the
deprecated "device_type" property for serial node(s)
-----BEGIN PGP SIGNATURE-----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=COzW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=v3PD
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.3/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64 SoCs Device Tree updates for
6.3, please pull the following:
- Krzysztof aligns the SMMMU Device Tree nodes to use the desired
regular expression matched by the dtschema and he also removes the
deprecated "device_type" property for serial node(s)
* tag 'arm-soc/for-6.3/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: drop deprecated serial device_type
arm64: dts: broadcom: align SMMU node names with DT schema
Link: https://lore.kernel.org/r/20230128193834.1628831-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
6.3, please pull the following:
- Krzysztof aligns the various Broadcom SoCs DTS UART nodes with the
binding convention to use "serial"
-----BEGIN PGP SIGNATURE-----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=JdyS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=E8lw
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.3/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM SoCs Device Tree updates for
6.3, please pull the following:
- Krzysztof aligns the various Broadcom SoCs DTS UART nodes with the
binding convention to use "serial"
* tag 'arm-soc/for-6.3/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: align UART node name with bindings
Link: https://lore.kernel.org/r/20230128193829.1628773-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ, add check if one of the
inputs is NULL and fail if this is the case.
Currently, the kernel crashes if one of the inputs is NULL. Instead,
fail the test and add an appropriate error message.
Fixes: b8a926bea8 ("kunit: Introduce KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ macros")
This was found by the kernel test robot:
https://lore.kernel.org/all/202212191448.D6EDPdOh-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Selecting CONFIG_PM_GENERIC_DOMAINS without CONFIG_PM leads to a
build failure:
WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
Depends on [n]: PM [=n]
Selected by [y]:
- SUN20I_PPU [=y] && (ARCH_SUNXI [=n] || COMPILE_TEST [=y])
drivers/base/power/domain_governor.c: In function 'default_suspend_ok':
drivers/base/power/domain_governor.c:85:24: error: 'struct dev_pm_info' has no member named 'ignore_children'
85 | if (!dev->power.ignore_children)
| ^
drivers/base/power/domain.c: In function 'genpd_queue_power_off_work':
drivers/base/power/domain.c:657:20: error: 'pm_wq' undeclared (first use in this function)
657 | queue_work(pm_wq, &genpd->power_off_work);
| ^~~~~
Unfortunately platforms are inconsistent between using 'select PM'
and 'depends on PM' here. CONFIG_PM is a user-visible symbol, so
in principle we should be using 'depends on', but on the other hand
using 'select' here is more common among drivers/soc. Go with the
majority for now, as this has a smaller risk of introducing circular
dependencies. We may need to clean this up for consistency later.
Fixes: 0e30ca5ab0 ("soc: sunxi: Add Allwinner D1 PPU driver")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The current discard_io_aware_gran is a fixed value, change it to be
configurable through the sys node.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
No need to initialize idx twice. BTW, remove the unnecessary cnt variable.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Following is series of fixes and cleanups for core topology code. Few
patches fixing various problems all around and few fixing function
names.
A userspace with multiple threads racing I915_GEM_SET_TILING to set the
tiling to I915_TILING_NONE could trigger a double free of the bit_17
bitmask. (Or conversely leak memory on the transition to tiled.) Move
allocation/free'ing of the bitmask within the section protected by the
obj lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Cc: <stable@vger.kernel.org> # v5.5+
[tursulin: Correct fixes tag and added cc stable.]
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127200550.3531984-1-robdclark@gmail.com
(cherry picked from commit 10e0cbaaf1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The debugfs dump of requests was confused about what state requires
the execlist lock versus the GuC lock. There was also a bunch of
duplicated messy code between it and the error capture code.
So refactor the hung request search into a re-usable function. And
reduce the span of the execlist state lock to only the execlist
specific code paths. In order to do that, also move the report of hold
count (which is an execlist only concept) from the top level dump
function to the lower level execlist specific function. Also, move the
execlist specific code into the execlist source file.
v2: Rename some functions and move to more appropriate files (Daniele).
v3: Rename new execlist dump function (Daniele)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-4-John.C.Harrison@Intel.com
(cherry picked from commit a4be3dca53)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When GuC support was added to error capture, the reference counting
around the request object was broken. Fix it up.
The context based search manages the spinlocking around the search
internally. So it needs to grab the reference count internally as
well. The execlist only request based search relies on external
locking, so it needs an external reference count but within the
spinlock not outside it.
The only other caller of the context based search is the code for
dumping engine state to debugfs. That code wasn't previously getting
an explicit reference at all as it does everything while holding the
execlist specific spinlock. So, that needs updaing as well as that
spinlock doesn't help when using GuC submission. Rather than trying to
conditionally get/put depending on submission model, just change it to
always do the get/put.
v2: Explicitly document adding an extra blank line in some dense code
(Andy Shevchenko). Fix multiple potential null pointer derefs in case
of no request found (some spotted by Tvrtko, but there was more!).
Also fix a leaked request in case of !started and another in
__guc_reset_context now that intel_context_find_active_request is
actually reference counting the returned request.
v3: Add a _get suffix to intel_context_find_active_request now that it
grabs a reference (Daniele).
v4: Split the intel_guc_find_hung_context change to a separate patch
and rename intel_context_find_active_request_get to
intel_context_get_active_request (Tvrtko).
v5: s/locking/reference counting/ in commit message (Tvrtko)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Fixes: 573ba126ae ("drm/i915/guc: Capture error state on context reset")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-3-John.C.Harrison@Intel.com
(cherry picked from commit 3700e35378)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
intel_guc_find_hung_context() was not acquiring the correct spinlock
before searching the request list. So fix that up. While at it, add
some extra whitespace padding for readability.
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-2-John.C.Harrison@Intel.com
(cherry picked from commit d1c3717501)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Adding the vm to the vm_xa table makes it visible to userspace, which
could try to race with us to close the vm. So we need to take our extra
reference before putting it in the table.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 9ec8795e7d ("drm/i915: Drop __rcu from gem_context->vm")
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119173321.2825472-1-robdclark@gmail.com
(cherry picked from commit 99343c46d4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Audio-Graph-Card and Simple-Audio-Card are similar Card
and are sharing same utils. Thus we can also sharing same schema.
This patch-set fixup some Renesas's "make dtbs_check".
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAmPXvZYACgkQ+7dXa6fL
C2vJAA//b5ApjHLzYq8rOh0aYEXaG7WAebrLOgc67TYALQFEVfXyNY6OAV+5ELbQ
3mOyuPMnt2rQc20RmTw3LzS8qSXe1+aNR76uTyNSJ3+04p4bdzkxj7wz9uSkyato
bCeJCwUIL/AcMv4HDlvM/+b7XvCY1tMAtnZqRLw4IXtw+6ZjPhXmf+NhLNY1iJ/2
pL4wijtMmg/auAB6bvZlQeBelgCp+N5mqb473cuTKibYFMoe7JG2dESdC7rUqVpH
dH1r9IHirkP0WS3eQnOqt0nhHRSvQZhtRzAszGTzBUc6knZ7GFs27JVfuJXeEmoh
YubJjGrY3yRF3T8VK3eI44imu3/Yb66bC2+Ykk8nHs8q4PpaQ//QWfN2ff8eXtlf
DGjRaD1abRBIPrFW2FujV4v8R7G0x0gnCrpJaoiOwn2pzwgu8XTC35MGFtd2yv19
WAsGMyzPrdfCWieiQ3WnQNy5F5MENPrXxVemi+cPlIuSfuPy9U67san/TpfCv3t9
hnv2BnIGcjy5xaayMHSKpO263J7PpX6vAlIXnDlurqYNNxjIbQkfAOz24Da3qHLE
jx4vkh5R8dgLoM3LLjOwv+AbyAAudfhYBemLBt0itmQuKerYWfQ+xjsgGMETQfPe
GrZtdEjceFpoy5yVBnFuBgv3m8q1pgWZ0LkPdKhjgFPW2bCVAgI=
=+bON
-----END PGP SIGNATURE-----
Merge tag 'fscache-fixes-20230130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache fixes from David Howells:
"Fix two problems in fscache volume handling:
- wake_up_bit() is incorrectly paired with wait_var_event(). The
latter selects the waitqueue to use differently.
- Missing barriers ordering between state bit and task state"
* tag 'fscache-fixes-20230130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()
fscache: Use wait_on_bit() to wait for the freeing of relinquished volume
Add a DT schema for describing Awinic AW88395 audio amplifiers. They are
controlled using I2C.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230113055301.189541-6-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-5-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Ben Yi <yijiangtao@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-4-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CXL r3.0 section 8.2.9.4.2 "Set Timestamp" recommends that the host sets
the timestamp after every Conventional or CXL Reset to ensure accurate
timestamps. This should include on initial boot up. The time base that
is being set is used by a device for the poison list overflow timestamp
and all event timestamps. Note that the command is optional and if
not supported and the device cannot return accurate timestamps it will
fill the fields in with an appropriate marker (see the specification
description of each timestamp).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230130151327.32415-1-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Kernel-doc should be complete, so add documentation for the status
parameter.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230130153437.3153-1-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit e33c267ab7 ("mm: shrinkers: provide shrinkers with names")
chose some fairly bad names for DM's shrinkers.
Fixes: e33c267ab7 ("mm: shrinkers: provide shrinkers with names")
Signed-off-by : Mike Snitzer <snitzer@kernel.org>
Improve the target side flow to reduce downtime as of below.
- Support reading an optional record which includes the expected
stop_copy size.
- Once the source sends this record data, which expects to be sent as
part of the pre_copy flow, prepare the data buffers that may be large
enough to hold the final stop_copy data.
The above reduces the migration downtime as the relevant stuff that is
needed to load the image data is prepared ahead as part of pre_copy.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Improve the source side flow upon pre_copy as of below.
- Prepare the stop_copy buffers as part of moving to pre_copy.
- Send to the target a record that includes the expected
stop_copy size to let it optimize its stop_copy flow as well.
As for sending the target this new record type (i.e.
MLX5_MIGF_HEADER_TAG_STOP_COPY_SIZE) we split the current 64 header
flags bits into 32 flags bits and another 32 tag bits, each record may
have a tag and a flag whether it's optional or mandatory. Optional
records will be ignored in the target.
The above reduces the downtime upon stop_copy as the relevant data stuff
is prepared ahead as part of pre_copy.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a check whether VF is migratable. Only if VF is migratable, mark the
VFIO device as migration capable.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230124144955.139901-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Change the prompt about SAMPLE_VFIO_MDEV_MBOCHS as
'Build VFIO mbochs example mediated device sample code'.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301301013518438986@zte.com.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230129084117.2384-1-liubo03@inspur.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The Renesas IDT821034 codec is four channel PCM codec with on-chip
filters and programmable gain setting.
It also provides SLIC (Subscriber Line Interface Circuit) signals as
GPIOs.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230126085137.375814-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Renesas IDT821034 codec is a quad PCM codec with programmable
gain.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230126085137.375814-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add runtime PM support for Microchip SPDIFRX driver. On runtime suspend
the clocks are disabled and regmap is set in caching mode. On runtime
resume the clocks are enabled and regmap is synced with the device.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-8-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
