It makes sense to enable CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT by default
(when possible by dependencies) to take advantages of all 256 PCI buses on
each PCI domain, like it is already on all other kernel architectures.
Fixes: 5663568130 ("powerpc/pci: Add config option for using all 256 PCI buses")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230128133459.32123-1-pali@kernel.org
Add support for PMCI-based flash access path and N6000 sec update
support. Access to flash staging area is different for N6000 from that
of the SPI interfaced counterparts.
Introduce intel_m10bmc_flash_bulk_ops to allow interface specific
differentiations for the flash access path for sec update and make
m10bmc_sec_read/write() in sec update driver to use the new operations.
The .flash_mutex serializes read/read. Flash update (erase+write) must
use ->lock/unlock_write() to prevent reads during update (reads would
timeout on setting flash MUX as BMC will prevent it).
Create a type specific RSU status reg handler for N6000 because the
field has moved from doorbell to auth result register.
If a failure is detected while altering the flash MUX, it seems safer
to try to set it back and doesn't seem harmful. Likely there are enough
troubles in that case anyway so setting it back fails too (which is
harmless sans the small extra delay) or just confirms that the value
wasn't changed.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-12-ilpo.jarvinen@linux.intel.com
Add the missing trigger patterns for Bluetooth and WLAN activity, which
are already in active use.
While at it, move the mmc pattern comment where it belongs, and restore
alphabetical sort order.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/0d0de1bc949d24e08174205c13c0b59bd73c1ea8.1674384302.git.geert+renesas@glider.be
If we register a "leds-gpio" platform device for GPIO pins that do not
exist we get a -EPROBE_DEFER and the probe will be tried again later.
If there is no driver to provide that pin we will poll forever and also
create a lot of log messages.
So check if that GPIO driver is configured, if so it will come up
eventually. If not, we exit our probe function early and do not even
bother registering the "leds-gpio". This method was chosen over "Kconfig
depends" since this way we can add support for more devices and GPIO
backends more easily without "depends":ing on all GPIO backends.
Fixes: a6c80bec3c ("leds: simatic-ipc-leds-gpio: Add GPIO version of Siemens driver")
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221007153323.1326-1-henning.schild@siemens.com
LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230103131256.33894-8-andriy.shevchenko@linux.intel.com
LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230103131256.33894-7-andriy.shevchenko@linux.intel.com
LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230103131256.33894-6-andriy.shevchenko@linux.intel.com
LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230103131256.33894-5-andriy.shevchenko@linux.intel.com
There are users inside and outside LED framework that have implemented
a local copy of led_init_default_state_get(). In order to deduplicate
that, as the first step move the declaration from LED header to the
global one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230103131256.33894-3-andriy.shevchenko@linux.intel.com
Clang complains that devm_add_action() takes a parameter with a wrong type:
warning: cast from 'void (*)(struct mutex *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
err = devm_add_action(dev, (void (*)(void *))mutex_destroy, &is31->lock);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
It appears that the commit e1af5c8155 ("leds: is31fl319x: Fix devm vs.
non-devm ordering") missed two things:
- whilst the commit mentions devm_add_action_or_reset() the actual change
utilised devm_add_action() call by mistake
- strictly speaking the parameter is not compatible by type
Fix both issues by switching to devm_add_action_or_reset() and adding a
wrapper for mutex_destroy() call.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1af5c8155 ("leds: is31fl319x: Fix devm vs. non-devm ordering")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221228093238.82713-1-andriy.shevchenko@linux.intel.com
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-289-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-286-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-285-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-283-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-281-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-280-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-276-uwe@kleine-koenig.org
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-274-uwe@kleine-koenig.org
class_find_device_by_of_node() calls class_find_device(), it will take
the reference, use the put_device() to drop the reference when not need
anymore.
Fixes: 699a8c7c4b ("leds: Add of_led_get() and led_put()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221220121807.1543790-1-linmq006@gmail.com
I defined 2 leds in the device tree, in the 1st led node, the
max-brightness is set to 248, while in the 2nd led node, I
mis-spelled the max-brightness to max-brighttness, but the driver
is still able to get the max-brightness 248 for the 2nd node, that
is because the led structure is not cleared before parsing each child
node.
pwmleds {
compatible = "pwm-leds";
pwm-green {
...
max-brightness = <248>;
};
pwm-red {
...
max-brighttness = <128>;
};
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221220073335.393489-1-hui.wang@canonical.com
Steen Hegelund says:
====================
Adding Sparx5 ES2 VCAP support
This provides the Egress Stage 2 (ES2) VCAP (Versatile Content-Aware
Processor) support for the Sparx5 platform.
The ES2 VCAP is an Egress Access Control VCAP that uses frame keyfields and
previously classified keyfields to apply e.g. policing, trapping or
mirroring to frames.
The ES2 VCAP has 2 lookups and they are accessible with a TC chain id:
- chain 20000000: ES2 Lookup 0
- chain 20100000: ES2 Lookup 1
As the other Sparx5 VCAPs the ES2 VCAP has its own lookup/port keyset
configuration that decides which keys will be used for matching on which
traffic type.
The ES2 VCAP has these traffic classifications:
- IPv4 frames
- IPv6 frames
- Other frames
The ES2 VCAP can match on an ISDX key (Ingress Service Index) as one of the
frame metadata keyfields. The IS0 VCAP can update this key using its
actions, and this allows a IS0 VCAP rule to be linked to an ES2 rule.
This is similar to how the IS0 VCAP and the IS2 VCAP use the PAG
(Policy Association Group) keyfield to link rules.
From user space this is exposed via "chain offsets", so an IS0 rule with a
"goto chain 20000015" action will use an ISDX key value of 15 to link to a
rule in the ES2 VCAP attached to the same chain id.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This enhances the KUNIT test of the VCAP API with tests of the chaining
functionality.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This enables the TC command to use the Sparx5 ES2 VCAP, and provides a new
ES2 ethertype table and handling of rule links between IS0 and ES2.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows the check of the goto action to be specific to the ingress and
egress VCAP instances.
The debugfs support is also updated to show this information.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the ES2 VCAP port keyset configuration for Sparx5 and also
updates the debugFS support to show the keyset configuration and the egress
port mask.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides the VCAP model for the Sparx5 ES2 (Egress Stage 2) VCAP.
This VCAP provides tagging and remarking functionality
This also renames a VCAP keyfield: VCAP_KF_MIRROR_ENA becomes
VCAP_KF_MIRROR_PROBE, as the first name was caused by a mistake in the
model transformation.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This improves the error message when a TC filter with CVLAN tag is used and
the selected VCAP instance does not support this.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This ensures that it will be possible for a VCAP rule to distinguish IPv6
frames from non-IP frames, as the IS0 keyset usually selected for the IPv6
traffic class in (7TUPLE) does not offer a key that specifies IPv6
directly: only non-IPv4.
The IP_SNAP key ensures that we select (at least) IP frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When there is only one keyset available for a certain VCAP rule size, the
particular keyset does not need a type id when encoded in the VCAP
Hardware.
This provides support for getting a keyset from a rule, when this is the
case: only one keyset fits this rule size.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
