Once disable_freq_invariance_work is called the scale_freq_tick function
will not compute or update the arch_freq_scale values.
However the scheduler will still read these values and use them.
The result is that the scheduler might perform unfair decisions based on stale
values.
This patch adds the step of setting the arch_freq_scale values for all
cpus to the default (max) value SCHED_CAPACITY_SCALE, Once all cpus
have the same arch_freq_scale value the scaling is meaningless.
Signed-off-by: Yair Podemsky <ypodemsk@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230110160206.75912-1-ypodemsk@redhat.com
The kernel commit 9a5418bc48 ("sched/core: Use kfree_rcu() in
do_set_cpus_allowed()") introduces a bug for kernels built with non-SMP
configs. Calling sched_setaffinity() on such a uniprocessor kernel will
cause cpumask_copy() to be called with a NULL pointer leading to general
protection fault. This is not really a problem in real use cases as
there aren't that many uniprocessor kernel configs in use and calling
sched_setaffinity() on such a uniprocessor system doesn't make sense.
Fix this problem by making sure cpumask_copy() will not be called in
such a case.
Fixes: 9a5418bc48 ("sched/core: Use kfree_rcu() in do_set_cpus_allowed()")
Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230115193122.563036-1-longman@redhat.com
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Fix a kernel-doc warning by correcting the function name in the
kernel-doc comment:
drivers/video/fbdev/core/fbmon.c:1073: warning: expecting prototype for fb_get_hblank_by_freq(). Prototype was for fb_get_hblank_by_hfreq() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
The s3c24xx bast platform was removed, so this driver has no
users any more and can be removed as well.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx SoC platform was completely removed, as were most of the
s3c64xx based board files, leaving only the DT based machines as well
as the MACH_WLF_CRAGG_6410 machine. All other board specific ASoC
driver can can now be recycled.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_SAMSUNG_PM_DEBUG was only used on s3c24xx because of the
DEBUG_S3C24XX_UART dependency. Since s3c24xx is now gone, and nobody
ever noticed this option being missing from s3c64xx, it can be safely
removed as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed,s o there are no remaining users
for its spi driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed, so this driver has no
remaining users.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx SoC support and its adc driver was removed, so this driver
has no remaining users.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed, so the framebuffer driver is no longer
needed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All s3c24xx platforms were removed, so these five drivers are all
obsolete now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed and this driver is no longer
needed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is gone, so both the udc and hsudc drivers
can be removed as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is gone, so the led driver can be
removed as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is gone, so the clk driver can be removed as
well.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is gone, so this driver can be removed as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This device was only used by the smdk6410 board file that is now
gone, so the driver can be removed as well.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c adc driver was removed along with the s3c24xx platform, so the
hwmon driver is orphaned and can be removed.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c-adc driver is removed along with the s3c24xx platform,
so the battery driver is no longer needed either.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
No board file and no dts file references the s3c6400 now, it's only
s3c6410, so remove the final bits as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Following down the now unused symbols and header files, some additional
content can be dropped that is used by neither the s3c64xx DT support
nor the crag6410 board.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver could not be enabled on s3c64xx for a long time
because of the ARCH_MULTIPLATFORM dependency, so remove it.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All traditional board files except for MACH_WLF_CRAGG_6410 were
marked as unused, so remove them now.
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The platform was deprecated in commit 6a5e69c7dd ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Assuming that we don't actually want the old-style pm-mmp2.c
and pm-pxa910.c implementation, all these files can go away
as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since all board support is now gone, a lot of code in the
platform is no longer called and can be removed as well.
The remaining parts are:
* The interrupt numbers for pxa910 are still needed for the
power management support.
* The 'mfp' device is still statically initialized from
platform code, though this could be moved into the
pinctrl code
* The CPU identification code is used for the cpu_is_mmp*()
macros.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The MMP_SRAM code is no longer used by the tdma driver because
the Kconfig symbol is not selected, so remove it along with its
former callsite.
Acked-By: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The old-style board files were marked as 'unused' a while ago
and can now be removed for good, leaving only devicetree based
boot support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The behavior of the MMP platform code depends on whether the
CPU_PXA168/CPU_PXA910/CPU_MMP2 symbols are enabled or not.
I believe the intention here was that these can be left disabled for
a pure DT-only build, but it's not clear if that actually works. At
the minimum, the cpu_is_pxa168() and cpu_is_pxa910() checks behave
differently, which causes changes in the power management code.
For the moment, make the behavior depend on whether CONFIG_ATAGS is set
or not, to make it easier to bisect the removal of the old code later.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sa11xx platform has two cpufreq drivers, one for the older
StrongARM1100 SoC, and a second one for StrongARM1110. After
the removal of most SA1100 based machines, this driver is unused,
and only the sa1110-cpufreq driver remains.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
IRDA support is long gone, so there is no need to declare the
platform device data.
See-also: d64c2a7612 ("staging: irda: remove the irda network stack and drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
fixup sa1100 irda
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the USB serial console device ID for Siemens SCALANCE LPE-9000
which have a USB port for their serial console.
Signed-off-by: Michael Adler <michael.adler@siemens.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPAA0AACgkQaA3BHVML
eiMKNAgAoXCFd7YMKoHSDlmAOztP+0qdZWM1LkpyC3fTpYbbNC1xI8yn7TVZIbgY
qtkceCUAGmzuO5kTo0aSZdgPWvdWCuDmYBQsX/VwACchSA0aOKZcCaqXGi2Y39D6
G4xsHJyRhU/lWzn/GZQ4+l46m6NAlnrLFBfuLlOHDhYtYZq9D8gXEDm7NSl8/HGF
OjtfSFINKKtOCjvi5GAa8CfnE8GVp59paFKJuj8xU6Dqqlorff+XroWkQG8LV4qi
3UyShQL6d/2hiRQ7fIhXEGCKit7rJkEpfsLvSqJkTkzOKyjhnIZbJIuesgqhtbEH
OpWsmUVKNphi0Y5zw5ZiTqrSy0Py7g==
=+mHi
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-01-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
amd-drm-next-6.3-2023-01-13:
amdgpu:
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so
that we don't lose the sbios console if FW is missing
- PSR fixes
- Misc cleanups
- Unload fix
- SMU13 fixes
amdkfd:
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Fix memory leak on shutdown
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113225911.7776-1-alexander.deucher@amd.com
The updating of 'bfqg->ref' should be protected by 'bfqd->lock', however,
during code review, we found that bfq_pd_free() update 'bfqg->ref'
without holding the lock, which is problematic:
1) bfq_pd_free() triggered by removing cgroup is called asynchronously;
2) bfqq will grab bfqg reference, and exit bfqq will drop the reference,
which can concurrent with 1).
Unfortunately, 'bfqd->lock' can't be held here because 'bfqd' might already
be freed in bfq_pd_free(). Fix the problem by using atomic refcount apis.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230103084755.1256479-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At the moment it is possible to perform unsafe operations in
the arguments of `pr_*` macros since they are evaluated inside
an `unsafe` block:
let x = &10u32 as *const u32;
pr_info!("{}", *x);
In other words, this is a soundness issue.
Fix it so that it requires an explicit `unsafe` block.
Reported-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reported-by: Domen Puncer Kugler <domen.puncerkugler@nccgroup.com>
Link: https://github.com/Rust-for-Linux/linux/issues/479
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Using REQ_OP_ZONE_APPEND operations for synchronous writes to sequential
files succeeds regardless of the zone write pointer position, as long as
the target zone is not full. This means that if an external (buggy)
application writes to the zone of a sequential file underneath the file
system, subsequent file write() operation will succeed but the file size
will not be correct and the file will contain invalid data written by
another application.
Modify zonefs_file_dio_append() to check the written sector of an append
write (returned in bio->bi_iter.bi_sector) and return -EIO if there is a
mismatch with the file zone wp offset field. This change triggers a call
to zonefs_io_error() and a zone check. Modify zonefs_io_error_cb() to
not expose the unexpected data after the current inode size when the
errors=remount-ro mode is used. Other error modes are correctly handled
already.
Fixes: 02ef12a663 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
The memcpy() in uvc_video_decode_meta() intentionally copies across the
length and flags members and into the trailing buf flexible array.
Split the copy so that the compiler can better reason about (the lack
of) buffer overflows here. Avoid the run-time false positive warning:
memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)
Additionally fix a typo in the documentation for struct uvc_meta_buf.
Reported-by: ionut_n2001@yahoo.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
