Add a test case for IPv6 source address delete.
As David suggested, add tests:
- Single device using src address
- Two devices with the same source address
- VRF with single device using src address
- VRF with two devices using src address
As Ido points out, in IPv6, the preferred source address is looked up in
the same VRF as the first nexthop device. This will give us similar results
to IPv4 if the route is installed in the same VRF as the nexthop device, but
not when the nexthop device is enslaved to a different VRF. So add tests:
- src address and nexthop dev in same VR
- src address and nexthop device in different VRF
The link local address delete logic is different from the global address.
It should only affect the associate device it bonds to. So add tests cases
for link local address testing.
Here is the test result:
IPv6 delete address route tests
Single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
Two devices with the same source address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
VRF with single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
VRF with two devices using src address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
src address and nexthop dev in same VRF
TEST: Prefsrc removed from VRF when source address deleted [ OK ]
TEST: Prefsrc in default VRF not removed [ OK ]
TEST: Prefsrc not removed from VRF when source address exist [ OK ]
TEST: Prefsrc in default VRF removed [ OK ]
src address and nexthop device in different VRF
TEST: Prefsrc not removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc not removed in default VRF [ OK ]
TEST: Prefsrc removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc removed in default VRF [ OK ]
Table ID 0
TEST: Prefsrc removed from default VRF when source address deleted [ OK ]
Link local source route
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed when delete ll addr [ OK ]
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed even ll addr still exist on other dev [ OK ]
Tests passed: 19
Tests failed: 0
Suggested-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After deleting an IPv6 address on an interface and cleaning up the
related preferred source entries, it is important to ensure that all
routes associated with the deleted address are properly cleared. The
current implementation of rt6_remove_prefsrc() only checks the preferred
source addresses bound to the current device. However, there may be
routes that are bound to other devices but still utilize the same
preferred source address.
To address this issue, it is necessary to also delete entries that are
bound to other interfaces but share the same source address with the
current device. Failure to delete these entries would leave routes that
are bound to the deleted address unclear. Here is an example reproducer
(I have omitted unrelated routes):
+ ip link add dummy1 type dummy
+ ip link add dummy2 type dummy
+ ip link set dummy1 up
+ ip link set dummy2 up
+ ip addr add 1:2:3:4::5/64 dev dummy1
+ ip route add 7:7:7:0::1 dev dummy1 src 1:2:3:4::5
+ ip route add 7:7:7:0::2 dev dummy2 src 1:2:3:4::5
+ ip -6 route show
1:2:3:4::/64 dev dummy1 proto kernel metric 256 pref medium
7:7:7::1 dev dummy1 src 1:2:3:4::5 metric 1024 pref medium
7:7:7::2 dev dummy2 src 1:2:3:4::5 metric 1024 pref medium
+ ip addr del 1:2:3:4::5/64 dev dummy1
+ ip -6 route show
7:7:7::1 dev dummy1 metric 1024 pref medium
7:7:7::2 dev dummy2 src 1:2:3:4::5 metric 1024 pref medium
As Ido reminds, in IPv6, the preferred source address is looked up in
the same VRF as the first nexthop device, which is different with IPv4.
So, while removing the device checking, we also need to add an
ipv6_chk_addr() check to make sure the address does not exist on the other
devices of the rt nexthop device's VRF.
After fix:
+ ip addr del 1:2:3:4::5/64 dev dummy1
+ ip -6 route show
7:7:7::1 dev dummy1 metric 1024 pref medium
7:7:7::2 dev dummy2 metric 1024 pref medium
Reported-by: Thomas Haller <thaller@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2170513
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the initial commit 1a01727676 ("selftests: Add VRF route leaking
tests") said, the IPv6 MTU test fails as source address selection
picking ::1. Every time we run the selftest this one report failed.
There seems not much meaning to keep reporting a failure for 3 years
that no one plan to fix/update. Let't just skip this one first. We can
add it back when the issue fixed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
addrconf_prefix_rcv returned early without releasing the inet6_dev
pointer when the PIO lifetime is less than accept_ra_min_lft.
Fixes: 5027d54a9c ("net: change accept_ra_min_rtr_lft to affect all RA lifetimes")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting IP_RECVERR and IPV6_RECVERR options to zero currently
purges the socket error queue, which was probably not expected
for zerocopy and tx_timestamp users.
I discovered this issue while preparing commit 6b5f43ea08
("inet: move inet->recverr to inet->inet_flags"), I presume this
change does not need to be backported to stable kernels.
Add skb_errqueue_purge() helper to purge error messages only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update .gitignore to untrack tools directory and log.txt. "tools" is
generated in "selftests/net/Makefile" and log.txt is generated in
"selftests/net/gro.sh" when executing run_all_tests.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie says:
====================
net: Return PTR_ERR() for fixed_phy_register()
fixed_phy_register() returns not only -EIO or -ENODEV, but also
-EPROBE_DEFER, -EINVAL and -EBUSY. The Best practice is to return these
error codes with PTR_ERR().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -EIO. The Best practice is to return these
error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -ENODEV. The Best practice is to return these
error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY,
etc, in addition to -ENODEV. The best practice is to return
these error codes with PTR_ERR().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP sendmsg() is lockless, so ip_select_ident_segs()
can very well be run from multiple cpus [1]
Convert inet->inet_id to an atomic_t, but implement
a dedicated path for TCP, avoiding cost of a locked
instruction (atomic_add_return())
Note that this patch will cause a trivial merge conflict
because we added inet->flags in net-next tree.
v2: added missing change in
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
(David Ahern)
[1]
BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb
read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1:
ip_select_ident_segs include/net/ip.h:542 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0:
ip_select_ident_segs include/net/ip.h:541 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x184d -> 0x184e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
==================================================================
Fixes: 23f57406b8 ("ipv4: avoid using shared IP generator for connected sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The user ports use RSGMII, but we don't have that, and DT doesn't
specify a phy interface mode, so phylib defaults to GMII. These support
1G, 100M and 10M with flow control. It is unknown whether asymetric
pause is supported at all speeds.
The CPU port uses MII/GMII/RGMII/REVMII by hardware pin strapping,
and support speeds specific to each, with full duplex only supported
in some modes. Flow control may be supported again by hardware pin
strapping, and theoretically is readable through a register but no
information is given in the datasheet for that.
So, we do a best efforts - and be lenient.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruan Jinjie says:
====================
net: Fix return value check for fixed_phy_register()
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Changes in v3:
- Drop the error fix patch for fixed_phy_get_gpiod().
- Split the error code update code into another patch set as suggested.
- Update the commit title and message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: b0ba512e25 ("net: bcmgenet: enable driver to work without a device tree")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: c25b23b8a3 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add RoCE MACsec rules when a gid is added for the MACsec netdevice and
handle their cleanup when the gid is removed or the MACsec SA is deleted.
Also support alias IP for the MACsec device, as long as we don't have
more ips than what the gid table can hold.
In addition handle the case where a gid is added but there are still no
SAs added for the MACsec device, so the rules are added later on when
the SAs are added.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Adds all the core steering helper functions that are needed in order
to setup RoCE steering rules which includes both the RX and TX rules
addition and deletion.
As well as exporting the function to be ready to use from the IB driver
where we expose functions to allow deletion of all rules, which is
needed when a GID is deleted, or a deletion of a specific rule when an SA
is deleted, and a similar manner for the rules addition.
These functions are used in a later patch by IB driver to trigger the
rules addition/deletion when needed.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Add steering tables/rules to check if the decrypted traffic is RoCEv2,
if so copy reg_b_metadata to a temp reg and forward it to RDMA_RX domain.
The rules are added once the MACsec device is assigned an IP address
where we verify that the packet ip is for MACsec device and that the temp
reg has MACsec operation and a valid SCI inside.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Add steering table in RDMA_TX domain, to forward MACsec traffic
to MACsec crypto table in NIC domain.
The tables are created in a lazy manner when the first TX SA is
being created, and destroyed upon the destruction of the last SA.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reorder GID delete code so that the driver del_gid operation is executed
before nullifying the gid attribute ndev parameter, this allows drivers
to access the ndev during their gid delete operation, which makes more
sense since they had access to it during the gid addition operation.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Add MACsec flow steering priorities in RDMA namespaces. This allows
adding tables/rules to forward RoCEv2 traffic to the MACsec crypto
tables in NIC_TX domain, and accept RoCEv2 traffic from NIC_RX domain.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Handle MACsec IP ambiguity issue, since mlx5 hw can't support
programming both the MACsec and the physical gid when they have the same
IP address, because it wouldn't know to whom to steer the traffic.
Hence in such case we delete the physical gid from the hw gid table,
which would then cause all traffic sent over it to fail, and we'll only
be able to send traffic over the MACsec gid.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Remove fs_id from the MACsec SA, since it has no real usage there and
instead maintain with the MACsec steering data inside the core.
Downstream patches requires this change to facilitate IB driver accesses
to the fs_ids to avoid RoCE MACsec dependency on EN driver.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Since MACsec steering was moved from ethernet private code to core,
remove the netdevice from the MACsec steering, and use core device
methods for error reporting instead.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Since now MACsec flow steering (macsec_fs) and MACsec statistics (stats)
are maintained by the core driver, move their data as well to be saved
inside core structures instead of staying part of ethernet MACsec database.
In addition cleanup all MACsec stats functions from the ethernet MACsec
code and move what's needed to be part of macsec_fs instead.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Since macsec flow steering was moved to core, it should be independent
of all ethernet code and structures hence we remove all ethernet header
includes and redefine ethernet structs internally for macsec_fs usage
where needed.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Move MACsec flow steering operations(macsec_fs) from core/en_accel to
core/lib, this mandates moving MACsec statistics structure from the
general MACsec code header(en_accel/macsec.h) to macsec_fs header to
remove macsec_fs.h dependency over en_accel/macsec.h.
This to lay the ground for RoCE MACsec by moving all the data
that will need to be accessed by both ethernet MACsec and
RoCE MACsec to be shared at core.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Given a macsec net_device add two functions to return the real net_device
for that device, and check if that macsec device is offloaded or not.
This is needed for auxiliary drivers that implement MACsec offload, but
have flows which are triggered over the macsec net_device, this allows
the drivers in such cases to verify if the device is offloaded or not,
and to access the real device of that macsec device, which would
belong to the driver, and would be needed for the offload procedure.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Here are some small tty and serial core fixes for 6.5-rc7 that resolve a
lot of reported issues.
Primarily in here is the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of different
types of systems and serial ports. All of the reported issues with
duplicate names and other issues with this code are now resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZOEjmg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykpSgCfajOM7BUzL1kOrfKNvHQuPmOYlIUAnAot+4M+
HkvS58Xs2+PM14y/KG1j
=6DRj
-----END PGP SIGNATURE-----
Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
Ruan Jinjie says:
====================
net: Update and fix return value check for vcap_get_rule()
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), which would be more cleaner.
So se IS_ERR() to update the return value and fix the issue
in lan966x_ptp_add_trap().
Changes in v2:
- Update vcap_get_rule() to always return an ERR_PTR().
- Update the return value fix in lan966x_ptp_add_trap().
- Update the return value check in sparx5_tc_free_rule_resources().
====================
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), so use IS_ERR() to check the return value.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), so use IS_ERR() to fix the return value issue.
Fixes: 72df3489fb ("net: lan966x: Add ptp trap rules")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Simon Horman suggests, update vcap_get_rule() to always
return an ERR_PTR() and update the error detection conditions to
use IS_ERR(), which would be more cleaner in this case.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 91a7cda1f4 ("net: phy: Fix race condition on link status
change") all the phy_error() method invocations have been causing the
nested-mutex-lock deadlock because it's normally done in the PHY-driver
threaded IRQ handlers which since that change have been called with the
phydev->lock mutex held. Here is the calls thread:
IRQ: phy_interrupt()
+-> mutex_lock(&phydev->lock); <--------------------+
drv->handle_interrupt() | Deadlock due
+-> ERROR: phy_error() + to the nested
+-> phy_process_error() | mutex lock
+-> mutex_lock(&phydev->lock); <-+
phydev->state = PHY_ERROR;
mutex_unlock(&phydev->lock);
mutex_unlock(&phydev->lock);
The problem can be easily reproduced just by calling phy_error() from any
PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock
mutex lock from the phy_process_error() method and printing a nasty error
message to the system log if the mutex isn't held in the caller execution
context.
Note for the fix to work correctly in the PHY-subsystem itself the
phydev->lock mutex locking must be added to the phy_error_precise()
function.
Link: https://lore.kernel.org/netdev/20230816180944.19262-1-fancer.lancer@gmail.com
Fixes: 91a7cda1f4 ("net: phy: Fix race condition on link status change")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
xgene_mdio_status is declared static, and is only written once by the
driver. It appears to have been this way since the driver was first
added to the kernel tree. No other users can be found, so let's remove
it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently any error during render leads to output an empty file.
That is quite annoying when using tools/net/ynl/ynl-regen.sh
which git greps files with content of "YNL-GEN.." and therefore ignores
empty files. So once you fail to regen, you have to checkout the file.
Avoid that by rendering to a temporary file first, only at the end
copy the content to the actual destination.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
All captured timestamps should be corrected by PHY, MAC and CDC introduced
latency/errors. The CDC correction is already used. Enable MAC propagation delay
correction as well which is available since commit 26cfb838aa ("net: stmmac:
correct MAC propagation delay").
Before:
|ptp4l[390.458]: rms 7 max 21 freq +177 +/- 14 delay 357 +/- 1
After:
|ptp4l[620.012]: rms 7 max 20 freq +195 +/- 14 delay 345 +/- 1
Tested on Intel Elkhart Lake.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC)
for active optical cables supporting 25G and 100G speeds.
Since the specification makes no statement about transmitter range, and
as the specific sfp module that had been tested features only 2m fiber -
short-range (SR) modes are selected.
The 100G speed is irrelevant because it would require multiple fibers /
multiple SFP28 modules combined under one netdev.
sfp-bus.c only handles a single module per netdev, so only 25Gbps modes
are selected.
sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR
with compatible properties, however that entry is a contradiction in
itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely
be a mode for qsfp modules only.
Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r
interface mode and 25000baseSR link mode.
Also enforce SFP28 bitrate limits on the values read from sfp eeprom as
requested by Russell King.
Tested with fs.com S28-AO02 AOC SFP28 module.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
unavailable for a while.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmTg7RsACgkQFA3kzBSg
KbbVXw/9GjnFwj0sazyKuHJdE3l3lP5RbWPhO9lF4pwSG2XAyVMLjpcsN27LvrKl
eu19hAu0a6C/PlUgYieCak/yl/9Xv08gxAcyI+PquAVtJ2XuWtsDUc0y1Rq2O53v
xFtQEy5eARWH3hI7f2rBbZWpgIXit7Xd+WLNRREttQgRRN8L9qmOwiZKuG2S2UQa
QMFn6qcOccwtkkvv992sZ4Pw54d9nOFCxKNim0TCiEKL9lgIelnrCJzqpw+yFRz/
a/bDtb2lLJGHeaSsjCH4dyobecLLXd/DtJSenCCGJUpfQ9cU9AqZDH/EUKQEUHyQ
p+LbixN/0viDZALwMzsXxPp+HuSouYr9m6s0ZstMUO73y9ydhaSoquq0f5eRjKbI
PRyhtBw55QLduoOITPcyPMwBxEIxXWhoNbF4hRnpdIRzLQ/JB+kO5a3RZ4BYFMP1
Rjz3vBKf2xzxlHJStYltNexmgPQ8PsfC6b7VJdyTOV74KUBADvWXPlBH/1tsppDX
wwQMrYE7ouzhJ1ypq6sDj7/ERjw9+0+XVbnlyEi6S9XXx1OkzHN6HMZWC34LCXiR
NXowjvU3O22wTnK3jzo2rIbJ+FPOYcaLcqV87vBCWigEByJ9jGxrwBBy2y4qsmyI
MpwwiXEuODdA1OEByxkCY3U5bfIjdW7QzPGb6tJEPJNWjFOHG3w=
=mRg9
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Usual set of driver fixes. A bit more than usual because I was
unavailable for a while"
* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
i2c: Update documentation to use .probe() again
i2c: sun6i-p2wi: Fix an error message in probe()
i2c: hisi: Only handle the interrupt of the driver's transfer
i2c: tegra: Fix i2c-tegra DMA config option processing
i2c: tegra: Fix failure during probe deferral cleanup
i2c: designware: Handle invalid SMBus block data response length value
i2c: designware: Correct length byte validation logic
i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
-----BEGIN PGP SIGNATURE-----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=eFDQ
-----END PGP SIGNATURE-----
Merge tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix infinite loop in readdir(), could happen in a big directory when
files get renamed during enumeration
- fix extent map handling of skipped pinned ranges
- fix a corner case when handling ordered extent length
- fix a potential crash when balance cancel races with pause
- verify correct uuid when starting scrub or device replace
* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
btrfs: fix BUG_ON condition in btrfs_cancel_balance
btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
btrfs: fix replace/scrub failure with metadata_uuid
btrfs: fix infinite directory reads
- various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and goldfishfb
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZODeUwAKCRD3ErUQojoP
X4RvAP97hetBNJFMw3N34QT4TYT3NUAhR12z73YFTi/PeKVSMgEA4nQHXuSP5Ymv
5+FNFsEHGJs6p25AMDc6oDKTYkVuMQc=
=PYOb
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
goldfishfb
* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: goldfishfb: Do not check 0 for platform_get_irq()
fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
fbdev: kyro: Remove unused declarations
fbdev: ssd1307fb: Print the PWM's label instead of its number
fbdev: mmp: fix value check in mmphw_probe()
fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
-----BEGIN PGP SIGNATURE-----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=LnzH
-----END PGP SIGNATURE-----
Merge tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Main thing here is the fix for the regression in flush handling which
caused IO hangs/stalls for a few reporters. Hopefully that should all
be sorted out now. Outside of that, just a few minor fixes for issues
that were introduced in this cycle"
* tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux:
blk-mq: release scheduler resource when request completes
blk-crypto: dynamically allocate fallback profile
blk-cgroup: hold queue_lock when removing blkg->q_node
drivers/rnbd: restore sysfs interface to rnbd-client
skb_queue_purge() and __skb_queue_purge() become wrappers
around the new generic functions.
New SKB_DROP_REASON_QUEUE_PURGE drop reason is added,
but users can start adding more specific reasons.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On server-initiated disconnect, rpcrdma_xprt_disconnect() was DMA-
unmapping the Receive buffers, but rpcrdma_post_recvs() neglected
to remap them after a new connection had been established. The
result was immediate failure of the new connection with the Receives
flushing with LOCAL_PROT_ERR.
Fixes: 671c450b6f ("xprtrdma: Fix oops in Receive handler after device removal")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Another highly rare error case when a page allocating loop (inside
__nfs4_get_acl_uncached, this time) is not properly unwound on error.
Since pages array is allocated being uninitialized, need to free only
lower array indices. NULL checks were useful before commit 62a1573fcf
("NFSv4 fix acl retrieval over krb5i/krb5p mounts") when the array had
been initialized to zero on stack.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 62a1573fcf ("NFSv4 fix acl retrieval over krb5i/krb5p mounts")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There is a slight issue with error handling code inside
nfs42_proc_getxattr(). If page allocating loop fails then we free the
failing page array element which is NULL but __free_page() can't deal with
NULL args.
Found by Linux Verification Center (linuxtesting.org).
Fixes: a1f26739cc ("NFSv4.2: improve page handling for GETXATTR")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
