Commit graph

311,532 commits

Author SHA1 Message Date
Ramakrishna Pallala
fcc015cda7 smb347-charger: Clean up battery attributes
CURRENT_NOW and VOLTAGE_NOW should be instantaneous readings
from power supply(ex: battery).

smb347 charger driver reports charge voltage for VOLTAGE_NOW
and charge current for CURRENT_NOW attributes which are not
instantaneous readings.

This patch removes the battery VOLTAGE_NOW and CURRENT_NOW
properties from the driver and also removes hw_to_current()
which is not required anymore.

Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-06 04:46:18 -07:00
Chris Mason
b9fab919b7 Btrfs: avoid sleeping in verify_parent_transid while atomic
verify_parent_transid needs to lock the extent range to make
sure no IO is underway, and so it can safely clear the
uptodate bits if our checks fail.

But, a few callers are using it with spinlocks held.  Most
of the time, the generation numbers are going to match, and
we don't want to switch to a blocking lock just for the error
case.  This adds an atomic flag to verify_parent_transid,
and changes it to return EAGAIN if it needs to block to
properly verifiy things.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-05-06 07:23:47 -04:00
Mark Hills
c914f55f7c ALSA: echoaudio: Remove incorrect part of assertion
This assertion seems to imply that chip->dsp_code_to_load is a pointer.
It's actually an integer handle on the actual firmware, and 0 has no
special meaning.

The assertion prevents initialisation of a Darla20 card, but would also
affect other models. It seems it was introduced in commit dd7b254d.

ALSA sound/pci/echoaudio/echoaudio.c:2061 Echoaudio driver starting...
ALSA sound/pci/echoaudio/echoaudio.c:1969 chip=ebe4e000
ALSA sound/pci/echoaudio/echoaudio.c:2007 pci=ed568000 irq=19 subdev=0010 Init hardware...
ALSA sound/pci/echoaudio/darla20_dsp.c:36 init_hw() - Darla20
------------[ cut here ]------------
WARNING: at sound/pci/echoaudio/echoaudio_dsp.c:478 init_hw+0x1d1/0x86c [snd_darla20]()
Hardware name: Dell DM051
BUG? (!chip->dsp_code_to_load || !chip->comm_page)

Signed-off-by: Mark Hills <mark@pogo.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-06 12:54:20 +02:00
Colin Cross
fde165b2a2 ARM: 7414/1: SMP: prevent use of the console when using idmap_pgd
Commit 4e8ee7de22 (ARM: SMP: use
idmap_pgd for mapping MMU enable during secondary booting)
switched secondary boot to use idmap_pgd, which is initialized
during early_initcall, instead of a page table initialized during
__cpu_up.  This causes idmap_pgd to contain the static mappings
but be missing all dynamic mappings.

If a console is registered that creates a dynamic mapping, the
printk in secondary_start_kernel will trigger a data abort on
the missing mapping before the exception handlers have been
initialized, leading to a hang.  Initial boot is not affected
because no consoles have been registered, and resume is usually
not affected because the offending console is suspended.
Onlining a cpu with hotplug triggers the problem.

A workaround is to the printk in secondary_start_kernel until
after the page tables have been switched back to init_mm.

Cc: <stable@vger.kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-06 11:10:41 +01:00
Marc Zyngier
bd0493eaaf ARM: 7413/1: move read_{boot,persistent}_clock to the architecture level
At the moment, read_persistent_clock is implemented at the
platform level, which makes it impossible to compile these
platforms in a single kernel.

Implement these two functions at the architecture level, and
provide a thin registration interface for both read_boot_clock
and read_persistent_clock. The two affected platforms (OMAP and
Tegra) are converted at the same time.

Reported-by: Jeff Ohlstein <johlstei@codeaurora.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-06 11:09:21 +01:00
Jan Kara
169ebd9013 writeback: Avoid iput() from flusher thread
Doing iput() from flusher thread (writeback_sb_inodes()) can create problems
because iput() can do a lot of work - for example truncate the inode if it's
the last iput on unlinked file. Some filesystems depend on flusher thread
progressing (e.g. because they need to flush delay allocated blocks to reduce
allocation uncertainty) and so flusher thread doing truncate creates
interesting dependencies and possibilities for deadlocks.

We get rid of iput() in flusher thread by using the fact that I_SYNC inode
flag effectively pins the inode in memory. So if we take care to either hold
i_lock or have I_SYNC set, we can get away without taking inode reference
in writeback_sb_inodes().

As a side effect of these changes, we also fix possible use-after-free in
wb_writeback() because inode_wait_for_writeback() call could try to reacquire
i_lock on the inode that was already free.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:41 +08:00
Jan Kara
dbd5768f87 vfs: Rename end_writeback() to clear_inode()
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:41 +08:00
Jan Kara
7994e6f725 vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
Currently, I_SYNC can never be set when evict_inode() (and thus
end_writeback()) is called because flusher thread holds inode reference while
inode is under writeback. As a result inode_sync_wait() in those places
currently does nothing. However that is going to change and unveils problems
with calling inode_sync_wait() from end_writeback(). Several filesystems call
end_writeback() after they have deleted the inode (btrfs, gfs2, ...) and other
filesystems (ext3, ext4, reiserfs, ...) can deadlock when waiting for I_SYNC
because they call end_writeback() from within a transaction.

To avoid these issues, we move inode_sync_wait() into evict_inode() before
calling ->evict_inode(). That way we preserve the current property that
->evict_inode() and writeback never run in parallel and all filesystems are
safe.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:40 +08:00
Jan Kara
4f8ad655db writeback: Refactor writeback_single_inode()
The code in writeback_single_inode() is relatively complex. The list requeing
logic makes sense only for flusher thread but not really for sync_inode() or
write_inode_now() callers. Also when we want to get rid of inode references
held by flusher thread, we will need a special I_SYNC handling there.

So separate part of writeback_single_inode() which does the real writeback work
into __writeback_single_inode() and make writeback_single_inode() do only stuff
necessary for callers writing only one inode, moving the special list handling
into writeback_sb_inodes(). As a sideeffect this fixes a possible race where we
could skip some inode during sync(2) because other writer refiled it from b_io
to b_dirty list. Also I_SYNC handling is moved into the callers of
__writeback_single_inode() to make locking easier.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:40 +08:00
Jan Kara
f0d07b7ffd writeback: Remove wb->list_lock from writeback_single_inode()
writeback_single_inode() doesn't need wb->list_lock for anything on entry now.
So remove the requirement. This makes locking of writeback_single_inode()
temporarily awkward (entering with i_lock, returning with i_lock and
wb->list_lock) but it will be sanitized in the next patch.

Also inode_wait_for_writeback() doesn't need wb->list_lock for anything. It was
just taking it to make usage convenient for callers but with
writeback_single_inode() changing it's not very convenient anymore. So remove
the lock from that function.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:39 +08:00
Jan Kara
ccb26b5a65 writeback: Separate inode requeueing after writeback
Move inode requeueing after inode has been written out into a separate
function.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:39 +08:00
Jan Kara
6290be1c1d writeback: Move I_DIRTY_PAGES handling
Instead of clearing I_DIRTY_PAGES and resetting it when we didn't succeed in
writing them all, just clear the bit only when we succeeded writing all the
pages. We also move the clearing of the bit close to other i_state handling to
separate it from writeback list handling. This is desirable because list
handling will differ for flusher thread and other writeback_single_inode()
callers in future. No filesystem plays any tricks with I_DIRTY_PAGES (like
checking it in ->writepages or ->write_inode implementation) so this movement
is safe.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:39 +08:00
Jan Kara
cc1676d917 writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
When writeback_single_inode() is called on inode which has I_SYNC already
set while doing WB_SYNC_NONE, inode is moved to b_more_io list. However
this makes sense only if the caller is flusher thread. For other callers of
writeback_single_inode() it doesn't really make sense and may be even wrong
- flusher thread may be doing WB_SYNC_ALL writeback in parallel.

So we move requeueing from writeback_single_inode() to writeback_sb_inodes().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:38 +08:00
Jan Kara
365b94ae67 writeback: Move clearing of I_SYNC into inode_sync_complete()
Move clearing of I_SYNC into inode_sync_complete().  It is more logical to have
clearing of I_SYNC bit and waking of waiters in one place. Also later we will
have two places needing to clear I_SYNC and wake up waiters so this allows them
to use the common helper. Moving of I_SYNC clearing to a later stage of
writeback_single_inode() is safe since we hold i_lock all the time.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:38 +08:00
Fengguang Wu
68809c7108 writeback: initialize global_dirty_limit
This prevents global_dirty_limit from remaining 0 (the initial value)
for long time, since it's only updated in update_dirty_limit() when
above the dirty freerun area.

It will avoid unexpected consequences when some random code use it as a
convenient approximation of the global dirty threshold.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:41:58 +08:00
Ramakrishna Pallala
9a8422d205 max17042_battery: Add support for max17047/50 chip
max17047 is improved version of max17042 chip. It has few HW bug
fixes with minor changes in register set.

max17050 is same as max17047 chip except its silicon packging. So from
driver's point of view there is no difference btw max1047 and max1050.

This patch adds the support to dynamically detect the chip type and
adds steps to initialize the max17047 chip.

Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 20:28:11 -07:00
Nikolaus Voss
b1f092f648 sbs-battery.c: Capacity attr = remaining relative capacity
Currently, the capacity exported by this driver refers to reg 0x0e,
which is the absolute state of charge which according to SBS
refers to the design capacity/ energy of the battery. It can be
> 100 % and drops below 100 % for a fully charged battery with
the battery aging.

This is not what the user exspects of a remaining capacity
indication between 0 and 100 % with 100 % referring to
a fully charged battery. This is provided by SBS reg 0x0d,
which is the relative state of charge referring to the
full charge capacity.

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 20:05:07 -07:00
Dan Carpenter
81a08382ae isp1704_charger: Use after free on probe error
We can't use "isp" after freeing it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 20:02:35 -07:00
Axel Lin
13f2483cd5 ds2781_battery: Use DS2781_PARAM_EEPROM_SIZE and DS2781_USER_EEPROM_SIZE
Since we have defined DS2781_PARAM_EEPROM_SIZE and
DS2781_USER_EEPROM_SIZE, use them to simplify the code.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 19:58:41 -07:00
Axel Lin
840b91bda9 power_supply: Fix a typo in BATTERY_DS2781 Kconfig entry
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 19:58:30 -07:00
Chanwoo Choi
dfeccb12b4 charger-manager: Provide cm_notify_event function for in-kernel use
By using cm_notify_event function, charger driver can report several
charger events (e.g. battery full and external power in/out, etc) to
Charger-Manager. Charger-Manager can properly and immediately control
chargers by the reported event.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 19:51:58 -07:00
Chanwoo Choi
d829dc75ba charger-manager: Poll battery health in normal state
Charger-Manager needs to check battery health in normal state
as well as suspend-to-RAM state. When the battery is fully charged,
Charger-Manager needs to determine when the chargers restart charging.

This patch allows Charger-Manager to monitor battery health in normal
state and handle operation for chargers after battery is fully charged.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 19:48:50 -07:00
Linus Torvalds
03cb00b3c7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fixes from Matt Turner:
 "My alpha tree is back up (after taking quite some time to get my GPG
  key signed).  It contains just some simple fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: silence 'const' warning in sys_marvel.c
  alpha: include module.h to fix modpost on Tsunami
  alpha: properly define get/set_rtc_time on Marvel/SMP
  alpha: VGA_HOSE depends on VGA_CONSOLE
2012-05-05 16:34:38 -07:00
Jiri Slaby
49a5f3cf6a TTY: pdc_cons, fix regression in close
The test in pdc_console_tty_close '!tty->count' was always wrong
because tty->count is decremented after tty->ops->close is called and
thus can never be zero. Hence the 'then' branch was never executed and
the timer never deleted.

This did not matter until commit 5dd5bc40f3 ("TTY: pdc_cons, use
tty_port").  There we needed to set TTY in tty_port to NULL, but this
never happened due to the bug above.

So change the test to really trigger at the last close by changing the
condition to 'tty->count == 1'.

Well, the driver should not touch tty->count at all.  It should use
tty_port->count and count open count there itself.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-and-tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-05 16:21:21 -07:00
Jiri Kosina
16b79bb8ec HID: multitouch: MT interface matching for Baanto
Baanto device entry needs to be altered in the same way other device
entries have been changed in 2c2110e90b ("HID: hid-multitouch: Only match
MT interfaces").

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05 23:32:54 +02:00
Jiri Kosina
645832cce2 Merge branch 'multitouch' into device-groups
I am merging multitouch branch into device-groups so that support
for Baanto device can be adjusted accordingly to the new autoloading
patches.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05 23:31:15 +02:00
Henrik Rydberg
2c2110e90b HID: hid-multitouch: Only match MT interfaces
All known hid-multitouch devices currently match any device group.
However, some devices present interfaces belonging to different groups,
resulting in a race between the hid-generic and hid-multitouch modules.
This patch narrows the MT device list to match only HID_GROUP_MULTITOUCH,
which solves the problem.

As an exception, the USB_DEVICE_ID_CYPRESS_TRUETOUCH panel is not
modified, in order to suppress the unwanted extra interfaces of the
device.

Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05 23:27:54 +02:00
Marcos Paulo de Souza
6237dd132d PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo
sysfs was expected in this context.

Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05 21:52:51 +02:00
Rafael J. Wysocki
6ff7bb0d02 PM / Domains: Cache device stop and domain power off governor results, v3
The results of the default device stop and domain power off governor
functions for generic PM domains, default_stop_ok() and
default_power_down_ok(), depend only on the timing data of devices,
which are static, and on their PM QoS constraints.  Thus, in theory,
these functions only need to carry out their computations, which may
be time consuming in general, when it is known that the PM QoS
constraint of at least one of the devices in question has changed.

Use the PM QoS notifiers of devices to implement that.  First,
introduce new fields, constraint_changed and max_off_time_changed,
into struct gpd_timing_data and struct generic_pm_domain,
respectively, and register a PM QoS notifier function when adding
a device into a domain that will set those fields to 'true' whenever
the device's PM QoS constraint is modified.  Second, make
default_stop_ok() and default_power_down_ok() use those fields to
decide whether or not to carry out their computations from scratch.

The device and PM domain hierarchies are taken into account in that
and the expense is that the changes of PM QoS constraints of
suspended devices will not be taken into account immediately, which
isn't guaranteed anyway in general.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05 21:51:58 +02:00
Rafael J. Wysocki
efa6902501 PM / Domains: Make device removal more straightforward
The removal of a device from a PM domain doesn't have to browse
the domain's device list, because it can check directly if the
device belongs to the given domain.  Moreover, it should clear
the domain_data pointer in dev->power.subsys_data, because
dev_pm_put_subsys_data(dev) may not remove dev->power.subsys_data
and the stale domain data pointer may cause problems to happen.

Rework pm_genpd_remove_device() taking the above observations into
account.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05 21:51:50 +02:00
Arve Hjønnevåg
040e5bf65e PM / Sleep: Fix a mistake in a conditional in autosleep_store()
The condition check in autosleep_store() is incorrect and prevents
/sys/power/autosleep from working as advertised.  Fix that.

[rjw: Added the changelog.]

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05 21:50:58 +02:00
Arve Hjønnevåg
4d7e30d989 epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready
When an epoll_event, that has the EPOLLWAKEUP flag set, is ready, a
wakeup_source will be active to prevent suspend. This can be used to
handle wakeup events from a driver that support poll, e.g. input, if
that driver wakes up the waitqueue passed to epoll before allowing
suspend.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-05 21:50:41 +02:00
Sam Ravnborg
d27579a273 kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux
Newly exported variables - used by link-vmlinux.sh

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 21:19:33 +02:00
Sam Ravnborg
1f2bfbd00e kbuild: link of vmlinux moved to a script
Move the final link of vmlinux to a script to improve
readability and maintainability of the code.

The Makefile fragments used to link vmlinux has over the
years seen far too many changes and the logic had become
hard to follow.

As the process by nature is serialized there was
nothing gained including this in the Makefile.

"um" has special link requirments - and the
only way to handle this was to hard-code the linking
of "um" in the script.
This was better than trying to modularize it only for the
benefit of "um" anyway.

The shell script has been improved after input from:
Arnaud Lacombe <lacombar@gmail.com>
Nick Bowler <nbowler@elliptictech.com>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Nick Bowler <nbowler@elliptictech.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 21:19:33 +02:00
Sam Ravnborg
9569857051 kbuild: refactor final link of sparc32
sparc32 uses an additional final link to support btfix.
Introduce a new set of exported variables in the top-level Makefile
to make the extra linking step simpler.

sparc32 has hardcoded knowledge of kallsyms support. This fix
include support for EXTRA_KALLSYM_PASS=1.
The ugly part is that it is hardcoded in the arch/sparc/boot
Makefile.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 21:19:33 +02:00
Sam Ravnborg
275eb135cf kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-05 21:19:33 +02:00
Daniel Vetter
5fe9fe8c98 drm/i915: fix gen4 gpu reset
While trying to fix up gen4 gpu reset in

commit f49f058619
Author: Kenneth Graunke <kenneth@whitecape.org>
Date:   Sat Sep 11 01:19:14 2010 -0700

    drm/i915: Actually set the reset bit in i965_reset

a little confusion about when wait_for times out has been introduced -
wait for loops _until_ the condition is true.

This fixes gpu reset on my gm45, testing with my hangman code shows
that it's now fairly reliable - it only died after well over 100 reset
cycles.

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:20 +02:00
Daniel Vetter
523bcb28c3 drm/i915: remove modeset reset from i915_reset
On gen4+ we don't reset the display unit, so resetting the complete
modeset state should not be necessary.

We can't do reset on gen3 anyway, which leaves us with gen2 reset:
According to Chris Wilson, that doesn't work so great, so he suggested
we just ignore that. If the need ever arrises, we can re-add it later
on.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:19 +02:00
Daniel Vetter
5ccce180fe drm/i915: also reset the media engine on gen4/5
... we actually use it.

Unfortunately we can't reset both at the same time without also
resetting the display unit, so do render and media separately.

Also replace magic constants with proper #defines.

Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:19 +02:00
Daniel Vetter
d4b8bb2ac1 drm/i915: kill flags parameter for reset functions
Only half of them even cared, and it's always the same one.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:18 +02:00
Daniel Vetter
2b9dc9a27b drm/i915: make gpu hangman more resilient
- reset the stop_rings infrastructure while resetting the hw to
  avoid angering the hangcheck right away (and potentially declaring
  the gpu permanently wedged).

- ignore reset failures when hanging due to the hangman - we don't
  have reset code for all generations.

v2: Ensure that we only ignore reset failures when the hw reset is not
implemented and not when it failed.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:18 +02:00
Daniel Vetter
350d270620 drm/i915: extract intel_gpu_reset
Slightly cleans up the code and could be useful for e.g. Ben
Widawsky's hw context patches.

v2: New colours!

Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:18 +02:00
Daniel Vetter
bcbc324a21 drm/i915: simplify i915_reset a bit
- need_display is always true, scrap it.
- don't reacquire the mutex to do nothing after having restored the
  gem state.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:17 +02:00
Daniel Vetter
d54423037f drm/i915: allow the existing error_state to be destroyed
... by writing (anything) to i915_error_state.

This way we can simulate a bunch of gpu hangs and run the error_state
capture code every time (without the need to reload the module).

To make that happen we need to abandon the simple seq_file wrappers
provided by the drm core. While at it put the new error_state
refcounting to some good use and associated the error_state to the
debugfs when opening the file. Otherwise the error_state could change
while someone is reading it. This should help greatly when we finally
get around to split up the giant single seq_file block that the
error_state file currently is into smaller parts.

v2: Actually squash all the fixes into the patch ...

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:17 +02:00
Daniel Vetter
742cbee804 drm/i915: rework dev->first_error locking
- reduce the irq disabled section, even for a debugfs file this was
  way too long.
- always disable irqs when taking the lock.

v2: Thou shalt not mistake locking for reference counting, so:
- reference count the error_state to protect from concurent freeeing.
  This will be only really used in the next patch.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:46:16 +02:00
Daniel Vetter
e5eb3d63c6 drm/i915: add interface to simulate gpu hangs
gpu reset is a very important piece of our infrastructure.
Unfortunately we only really it test by actually hanging the gpu,
which often has bad side-effects for the entire system. And the gpu
hang handling code is one of the rather complicated pieces of code we
have, consisting of
- hang detection
- error capture
- actual gpu reset
- reset of all the gem bookkeeping
- reinitialition of the entire gpu

This patch adds a debugfs to selectively stopping rings by ceasing to
update the hw tail pointer, which will result in the gpu no longer
updating it's head pointer and eventually to the hangcheck firing.
This way we can exercise the gpu hang code under controlled conditions
without a dying gpu taking down the entire systems.

Patch motivated by me forgetting to properly reinitialize ppgtt after
a gpu reset.

Usage:

echo $((1 << $ringnum)) > i915_ring_stop # stops one ring

echo 0xffffffff > i915_ring_stop # stops all, future-proof version

then run whatever testload is desired. i915_ring_stop automatically
resets after a gpu hang is detected to avoid hanging the gpu to fast
and declaring it wedged.

v2: Incorporate feedback from Chris Wilson.

v3: Add the missing cleanup.

v4: Fix up inconsistent size of ring_stop_read vs _write, noticed by
Eugeni Dodonov.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-05 19:45:00 +02:00
Linus Torvalds
1c2f954806 sound fixes for 3.4-rc6
As good as nothing exciting here; just a few trivial fixes for
 various ASoC stuff.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPpRa+AAoJEGwxgFQ9KSmkM4sP/jsd/scLYP3T1tu1pqiU6zyZ
 qNDu8ghU3AVuGe3qxAVb8AjrXALyqkqg1GXHY66R+Q/BmgtjOfTNyNV+ypGRuGif
 TJcLqWim0CVASZRFGkg/C9fEmeN5CDKcmZF7B53nAL2PRzm2/OrNhVBBKFc9bcbI
 S73pRGg+MoHbA3OrroZnBIA4dyG3+K+p2h9VlXUj1gdxu5+uzoiZwSbu/nGdLi/W
 5CCw9VceFi7sRkjBHuFL9grCgGASP5T89O6+lUH79JVnFdLXV63zpQt+zc6JUM8e
 mvosfcJZ6uln6aG+ACA0xgEwExImLLXiPl0BScIJo+HmwGoCbPIS06lBmjLBac1p
 78CYNYfhV3AzWCKbmMZXMEiu3g1O33N9UuOxKvnH02TH5b8B6OUdTFkf6JUA32Zw
 wtCe4yT48zJ+Iu5+YU/7dvDrtUdMVQ7ogSUyMnKFee+uh5a5I5r1T7ybJ8igF/qe
 2YqhpeUW4AEFA9VlPxVP4itVVQK8V0GL1+N0ny5COoT8ldImqqjCCpCJRdljCHDr
 xTK5n0FVZBP0hh2MwJZDNOwtNV2fKrA3vPJYjFhNfhzj+Sha9rxDXg4KnW5PA2P2
 H6I88vETSsrer5JlOzGp7myzdzrqb5gpMKTuWKpjxbCl3aihN16NiKQa8NzizSzg
 ZQldGV1KrK6GNFOkoSeQ
 =ZPkR
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound sound fixes from Takashi Iwai:
 "As good as nothing exciting here; just a few trivial fixes for various
  ASoC stuff."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: omap-pcm: Free dma buffers in case of error.
  ASoC: s3c2412-i2s: Fix dai registration
  ASoC: wm8350: Don't use locally allocated codec struct
  ASoC: tlv312aic23: unbreak resume
  ASoC: bf5xx-ssm2602: Set DAI format
  ASoC: core: check of_property_count_strings failure
  ASoC: dt: sgtl5000.txt: Add description for 'reg' field
  ASoC: wm_hubs: Make sure we don't disable differential line outputs
2012-05-05 10:07:06 -07:00
Linus Torvalds
59068e369b Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull an ACPI patch from Len Brown:
 "It fixes a D3 issue new in 3.4-rc1."

By Lin Ming via Len Brown:
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  ACPI: Fix D3hot v D3cold confusion
2012-05-05 10:06:06 -07:00
Sasha Levin
377485f624 init: don't try mounting device as nfs root unless type fully matches
Currently, we'll try mounting any device who's major device number is
UNNAMED_MAJOR as NFS root.  This would happen for non-NFS devices as
well (such as 9p devices) but it wouldn't cause any issues since
mounting the device as NFS would fail quickly and the code proceeded to
doing the proper mount:

       [  101.522716] VFS: Unable to mount root fs via NFS, trying floppy.
       [  101.534499] VFS: Mounted root (9p filesystem) on device 0:18.

Commit 6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries
when mounting NFS root, which means that now we don't immediately fail
and instead it takes an additional 90+ seconds until we stop retrying,
which has revealed the issue this patch fixes.

This meant that it would take an additional 90 seconds to boot when
we're not using a device type which gets detected in order before NFS.

This patch modifies the NFS type check to require device type to be
'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR
major.  This makes boot process cleaner since we now won't go through
the NFS mounting code at all when the device isn't an NFS root
("/dev/nfs").

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-05 10:04:40 -07:00
Will Deacon
2f97836698 ARM: 7412/1: audit: use only AUDIT_ARCH_ARM regardless of endianness
The machine endianness has no direct correspondence to the syscall ABI,
so use only AUDIT_ARCH_ARM when identifying the ABI to the audit tools
in userspace.

Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-05 13:54:01 +01:00