Commit graph

311,532 commits

Author SHA1 Message Date
Guennadi Liakhovetski
b1e1179cea [media] mt9m032: fix two dead-locks
Fix a copy-paste typo and a nested locking function call in mt9m032.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:37:52 -03:00
Laurent Pinchart
dfea00191a [media] mt9p031: Implement black level compensation control
Add four new controls to configure black level compensation (BLC):

- V4L2_CID_BLC_AUTO selects between manual and auto BLC
- V4L2_CID_BLC_TARGET_LEVEL sets the target level for auto BLC
- V4L2_CID_BLC_ANALOG_OFFSET sets the analog offset for manual BLC
- V4L2_CID_BLC_DIGITAL_OFFSET sets the digital offset for manual BLC

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:37:39 -03:00
Axel Lin
40baecee48 regulator: max8649: Convert to regulator_set_voltage_sel_regmap and regulator_map_voltage_linear
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 17:34:48 +01:00
Axel Lin
0fb737b566 regulator: max8649: Convert to regulator_list_voltage_linear()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 17:34:48 +01:00
Axel Lin
817d8c2d9b regulator: max8649: Use regulator_get_voltage_sel_regmap()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 17:34:47 +01:00
Axel Lin
0f65402b25 regulator: max8649: Convert to get_voltage_sel
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 17:34:46 +01:00
Axel Lin
be15411d97 regulator: tps62360: Fix build error due to missing semicolon
Fix below build error:
  CC [M]  drivers/regulator/tps62360-regulator.o
drivers/regulator/tps62360-regulator.c:351:1: error: expected ',' or ';' before 'extern'
make[2]: *** [drivers/regulator/tps62360-regulator.o] Error 1
make[1]: *** [drivers/regulator] Error 2
make: *** [drivers] Error 2

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 17:34:31 +01:00
Laurent Pinchart
15693b5793 [media] mt9p031: Replace the reset board callback by a GPIO number
Use the GPIO from the sensor driver instead of calling back to board
code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:33:44 -03:00
Laurent Pinchart
1c542ba854 [media] mt9p031: Identify color/mono models using I2C device name
Instead of passing a color/monochrome flag through platform data, rely
on the I2C device name to identify the chip model.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:32:22 -03:00
Bjørn Mork
ef206f3f01 USB: add read support to usb-serial/../new_id
Keep the usb-serial support for dynamic IDs in sync with the usb
support.  This enables readout of dynamic device IDs for
usb-serial drivers.  Common code is exported from the usb core
system and reused by the usb-serial bus driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:30:40 -07:00
Bjørn Mork
e6bbcef021 USB: let both new_id and remove_id show dynamic id list
This enables the current list of dynamic IDs to be read out through
either new_id or remove_id.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:30:40 -07:00
Andrzej Pietrasiewicz
581791f5c7 FunctionFS: enable multiple functions
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:25:44 -07:00
Greg Kroah-Hartman
304f0b2453 Revert "usb: add struct usb_hub_port to store port related members."
This reverts commit f397d7c4c5.

This series isn't quite ready for 3.5 just yet, so revert it and give
the author more time to get it correct.

Cc: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:22:58 -07:00
Peter De Schrijver
97e7abc5e0 ARM: tegra: Fix flow controller accesses
flowctrl_write_cpu_csr uses the cpu halt offsets and vice versa. This patch
fixes this bug.

Reported-by: Dan Willemsen <dwillemsen@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
[swarren: This problem was introduced in v3.4-rc1, in commit 26fe681 "ARM:
 tegra: functions to access the flowcontroller", when this file was first
 added]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-14 10:22:01 -06:00
Antti Palosaari
d281c1f144 [media] af9035: add few new reference design USB IDs
Add all known reference design USB IDs.
Rename two earlier reference design USB IDs.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:21:05 -03:00
Antti Palosaari
1cbabf9c75 [media] af9035: remove one config parameter
We can use tuner ID instead of HW not supported flag.
Lesser code is better code.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:20:44 -03:00
Greg Kroah-Hartman
fa286188ce Revert "usb: move struct usb_device->children to struct usb_hub_port->child"
This reverts commit bebc56d58d.

The call here is fragile and not well thought out, so revert it, it's
not fully baked yet and I don't want this to go into 3.5.

Cc: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:20:37 -07:00
Antti Palosaari
2a79eefa82 [media] af9035: move device configuration to the state
Fixes most problems when having more than one device connected
as demod and tuner configurations are not shared.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:20:24 -03:00
Hans-Frieder Vogt
47eafa5427 [media] af9033: implement ber and ucb functions
af9033: implement read_ber and read_ucblocks functions. Version 2 of patch that
reflects my findings on the behaviour of abort_cnt, err_cnt and bit_cnt:

- bit_cnt is always 0x2710 (10000)
- abort_cnt is between 0 and 0x2710
- err_cnt is between 0 and 640000 (= 0x2710 * 8 * 8)

in the current implementation BER is calculated as the number of bit errors per
processed bits, ignoring those bits that are already discarded and counted in
abort_cnt, i.e. UCBLOCKS.

Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:19:31 -03:00
Hans-Frieder Vogt
3234bd2f19 [media] af9035: add remote control support
Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:19:12 -03:00
Antti Palosaari
52560b7284 [media] af9035: remove unused struct
Not used anymore since new firmware downloader. I forget to remove
those earlier when changed firmware downloader.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:15:45 -03:00
Andrew Lunn
ca2ac5cc95 Dove: Fix Section mismatch warnings
Add missing __init markups to GPIO and timer functions.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-14 18:13:15 +02:00
Alexander Clouter
4d72cef17b ARM: orion5x: ts78xx debugging changes
Move to using a refined pr_fmt to avoid having to manually
prefix every message line with 'ts78xx'.

Changelog:
 v2: moved pr_fmt define ahead of includes as suggested by
	Hartley Sweeten to avoid use of leading undef
 v1: initial release

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-14 18:13:05 +02:00
Alexander Clouter
4f8cf6106d ARM: orion5x: remove PM dependency from ts78xx
Move ts78xx_fpga from /sys/power to /sys/firmware so that
we can remove the PM dependency.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-14 18:13:03 +02:00
Alexander Clouter
167473a593 ARM: orion5x: ts78xx fix NAND resource off by one
Changelog:
 v2: use DEFINE_RES_MEM as suggesed by Hartley Sweeten
 v1: inital release

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-14 18:13:02 +02:00
Alexander Clouter
9f234997da ARM: orion5x: ts78xx whitespace cleanups
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-14 18:13:00 +02:00
Andrew Lunn
d2621b82c2 Orion5x: Fix Section mismatch warnings
Wrongly placed __initdata, and missing __init caused these warnings.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-14 18:12:37 +02:00
Andrew Lunn
6ed272f245 Orion5x: Fix warning: struct pci_dev declared inside paramter list
Orion5x board files which don't have PCI give warnings:

arch/arm/mach-orion5x/common.h:54:38: warning: 'struct pci_dev' declared
inside parameter list.

Add a forward declaration in the header file, which is the pattern
used for other PCI structures.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-05-14 18:12:36 +02:00
Antti Palosaari
6fb39c50a0 [media] af9035: various small changes for af9035_ctrl_msg()
Fix USB buffer len to maximum possible.
Various log writing fixes, remove extra new lines and excessive
type casts. Rename and type change some variables.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 13:07:44 -03:00
Alan Cox
05f843b5d3 tty: Fix LED error return
3.4-rc introduced a regression when setting the LEDS. We do the right thing
but then return an error code.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43144
Reported-by: Christian Casteyde
Signed-off-by: Alan Cox <alan@linux/intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:04:28 -07:00
Alan Cox
1e66cded33 tty: Allow uart_register/unregister/register
This is legitimate but because we don't clear the drv->state pointer in the
unregister code causes a bogus BUG().

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42880
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:04:28 -07:00
Shinya Kuribayashi
e44694e858 USB: gpio_vbus: avoid consecutive vbus_session calls with the same "is_active"
Basically, ->vbus_session() calls should be served when VBUS session
starts and ends (it's not whenever transciever drivers detect VBUS
_changes_).  Otherwise, if UDC gadget drivers don't want for some
reason ->vbus_session() calls with the same "is_active" value, either
OTG or UDC drivers need to have some protection handlings.

Also, on platforms using this 'gpio_vbus' driver, the driver is only
allowed to check whether VBUS is applied.  There is no kernel-standard
way prepared for UDC gadget drivers to do that.

With this in mind, gpio_vbus should try to prevent unnecessary
consecutive vbus_session calls being served with the same "in_active"
value.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:02:23 -07:00
Shinya Kuribayashi
a6dc9cf76b USB: gpio_vbus: put a missing regulator_put() on error
Note that regulator_put() doesn't care about whether ->vbus_draw is
valid or not.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:02:23 -07:00
Shinya Kuribayashi
934ccec4da USB: gpio_vbus: provide an appropriate debounce interval
In commit c2344f13b5 (USB: gpio_vbus:
add delayed vbus_session calls, 2009-01-24), usb_gadget_vbus_connect()
and ...disconnect() were extracted from the interrupt handler, so to
allow vbus_session handlers to deal with msleep() calls.

This patch takes the approach one step further.

USB2.0 specification (7.1.7.3 Connect and Disconnect Signaling) says
that the USB system software (shall) provide a debounce interval with
a minimum duration of 100 ms, which ensures that the electrical and
mechanical connection is stable before software attempts to reset
the attached device.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:01:50 -07:00
Shinya Kuribayashi
0d13eebcab USB: gpio_vbus: fix inconsistent 'dev_id' parameters at free_irq()
'dev_id' has to be the same with the one passed to request_irq().

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:01:50 -07:00
K. Y. Srinivasan
c836d0ab70 Drivers: hv: util: Properly handle version negotiations.
The current version negotiation code is not "future proof". Fix this
by allowing each service the flexibility to either specify the highest
version it can support or it can support the highest version number
the host is offering.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:59:31 -07:00
K. Y. Srinivasan
a360530012 Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
The vmbus_prep_negotiate_resp() is only invoked when we are negotiating
the version; so the current check in vmbus_prep_negotiate_resp()
is unnecessary. Get rid of it.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:59:31 -07:00
Anton Vorontsov
d3b4876951 staging: android: persistent_ram: Introduce persistent_ram_free()
A corresponding function to persistent_ram_new().

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:56:05 -07:00
Anton Vorontsov
24c3d2f342 staging: android: persistent_ram: Make it possible to use memory outside of bootmem
This includes devices' memory (e.g. framebuffers or memory mapped
EEPROMs on a local bus), as well as the normal RAM that we don't use
for the main memory.

For the normal (but unused) ram we could use kmaps, but this assumes
highmem support, so we don't bother and just use the memory via
ioremap.

As a side effect, the following hack is possible: when used together
with pstore_ram (new ramoops) module, we can limit the normal RAM region
with mem= and then point ramoops to use the rest of the memory, e.g.

	mem=128M ramoops.mem_address=0x8000000

Sure, we could just reserve the region with memblock_reserve() early in
the arch/ code, and then register a pstore_ram platform device pointing
to the reserved region. It's still a viable option if platform wants
to do so.

Also, we might want to use IO accessors in case of a real device,
but for now we don't bother (the old ramoops wasn't using it either, so
at least we don't make things worse).

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:56:05 -07:00
Anton Vorontsov
2b1321e471 staging: android: persistent_ram: Introduce persistent_ram_vmap()
Factor out vmap logic out of persistent_ram_buffer_map(), this will
make the code a bit more understandable when we'll add support for
non-bootmem memory.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:56:05 -07:00
Anton Vorontsov
8cf5aff89e staging: android: persistent_ram: Introduce persistent_ram_new()
The routine just creates a persistent ram zone at a specified address.

For persistent_ram_init_ringbuffer() we'd need to add a
'struct persistent_ram' to the global list, and associate it with a
device. We don't need all this complexity in pstore_ram, so we introduce
the simple function.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:56:05 -07:00
Anton Vorontsov
bb4206f204 staging: android: persistent_ram: Introduce persistent_ram_post_init()
Factor post init logic out of __persistent_ram_init(), we'll need
it for the new persistent_ram_new() routine.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:56:04 -07:00
Anton Vorontsov
484dd30e01 persistent_ram: Fix buffer size clamping during writes
This is a longstanding bug, almost unnoticeable when calling
persistent_ram_write() for small buffers.

But when called for large data buffers, the write routine behaves
incorrectly, as the size may never update: instead of clamping
the size to the maximum buffer size, buffer_size_add_clamp() returns
an error (which is never checked by the write routine, btw).

To fix this, we now use buffer_size_add() that actually clamps the
size to the max value.

Also remove buffer_size_add_clamp(), it is no longer needed.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Colin Cross <ccross@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:54:23 -07:00
Anton Vorontsov
06f3d3bdee persistent_ram: Remove prz->node
The 'node' struct member is unused, so remove it.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:54:23 -07:00
David Herrmann
1b0159bab9 usb: Kconfig: remove unneeded default value
If no default value is specified, then 'n' is used so the default value
used here is not needed. Furthermore, we should never change default
values depending on EXPERT mode. EXPERT mode should only make options
visible, not change them.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:49:50 -07:00
Jarkko Nikula
0686a1fab0 USB: ohci-omap: Use usb_put_transceiver instead of put_device
Currently usb_put_transceiver calls put_device so this is a no-op but it
is better to keep API usage consistent as ohci->transceiver is allocated
with usb_get_transceiver.

While at there remove one extra ohci->transceiver test as the code block
has already tested it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:49:50 -07:00
Jarkko Nikula
fee8bc1c8e USB: ehci-fsl: Use usb_put_transceiver instead of put_device
Currently usb_put_transceiver calls put_device so this is a no-op but it
is better to keep API usage consistent as ehci->transceiver is allocated
with usb_get_transceiver.

While at there remove one extra ehci->transceiver test as the code block
has already tested it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:49:50 -07:00
Arnd Bergmann
74c437532b ARM: spear6xx: remove board selection options
There are no board specific configurations that need user
intervention, so just make MACH_SPEAR600 the silent default
for ARCH_SPEAR6XX to prevent users from turning it off, which
would result in a build error.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
2012-05-14 17:48:27 +02:00
Hans Verkuil
4b25524c7b [media] pms: update to the latest V4L2 frameworks
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 12:47:36 -03:00
Hiroshi DOYU
90394482b8 memory: tegra{20,30}-mc: Use dev_err_ratelimited()
Introduce a new dev_*_ratelimited() instead of pr_*_ratelimited() for
better info to print.

Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:47:11 -07:00