Commit graph

797,141 commits

Author SHA1 Message Date
Guoqing Jiang
ca1e98e04a md-cluster/raid10: don't call remove_and_add_spares during reshaping stage
remove_and_add_spares is not needed if reshape is
happening in another node, because raid10_add_disk
called inside raid10_start_reshape would handle the
role changes of disk. Plus, remove_and_add_spares
can't deal with the role change due to reshape.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 09:39:10 -07:00
Guoqing Jiang
aefb2e5fc2 md-cluster/raid10: call update_size in md_reap_sync_thread
We need to change the capacity in all nodes after one node
finishs reshape. And as we did before, we can't change the
capacity directly in md_do_sync, instead, the capacity should
be only changed in update_size or received CHANGE_CAPACITY
msg.

So master node calls update_size after completes reshape in
md_reap_sync_thread, but we need to skip ops->update_size if
MD_CLOSING is set since reshaping could not be finish.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 09:38:06 -07:00
Guoqing Jiang
5ebaf80bc8 md-cluster: introduce resync_info_get interface for sanity check
Since the resync region from suspend_info means one node
is reshaping this area, so the position of reshape_progress
should be included in the area.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 09:36:35 -07:00
Guoqing Jiang
7564beda19 md-cluster/raid10: support add disk under grow mode
For clustered raid10 scenario, we need to let all the nodes
know about that a new disk is added to the array, and the
reshape caused by add new member just need to be happened in
one node, but other nodes should know about the change.

Since reshape means read data from somewhere (which is already
used by array) and write data to unused region. Obviously, it
is awful if one node is reading data from address while another
node is writing to the same address. Considering we have
implemented suspend writes in the resyncing area, so we can
just broadcast the reading address to other nodes to avoid the
trouble.

For master node, it would call reshape_request then update sb
during the reshape period. To avoid above trouble, we call
resync_info_update to send RESYNC message in reshape_request.

Then from slave node's view, it receives two type messages:
1. RESYNCING message
Slave node add the address (where master node reading data from)
to suspend list.

2. METADATA_UPDATED message
Once slave nodes know the reshaping is started in master node,
it is time to update reshape position and call start_reshape to
follow master node's step. After reshape is done, only reshape
position is need to be updated, so the majority task of reshaping
is happened on the master node.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 09:34:56 -07:00
Guoqing Jiang
afd7562860 md-cluster/raid10: resize all the bitmaps before start reshape
To support add disk under grow mode, we need to resize
all the bitmaps of each node before reshape, so that we
can ensure all nodes have the same view of the bitmap of
the clustered raid.

So after the master node resized the bitmap, it broadcast
a message to other slave nodes, and it checks the size of
each bitmap are same or not by compare pages. We can only
continue the reshaping after all nodes update the bitmap
to the same size (by checking the pages), otherwise revert
bitmap size to previous value.

The resize_bitmaps interface and BITMAP_RESIZE message are
introduced in md-cluster.c for the purpose.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18 09:30:58 -07:00
Jon Derrick
dc8af3a827 PCI: vmd: Detach resources after stopping root bus
The VMD removal path calls pci_stop_root_busi(), which tears down the pcie
tree, including detaching all of the attached drivers. During driver
detachment, devices may use pci_release_region() to release resources.
This path relies on the resource being accessible in resource tree.

By detaching the child domain from the parent resource domain prior to
stopping the bus, we are preventing the list traversal from finding the
resource to be freed. If we instead detach the resource after stopping
the bus, we will have properly freed the resource and detaching is
simply accounting at that point.

Without this order, the resource is never freed and is orphaned on VMD
removal, leading to a warning:

[  181.940162] Trying to free nonexistent resource <e5a10000-e5a13fff>

Fixes: 2c2c5c5cd2 ("x86/PCI: VMD: Attach VMD resources to parent domain's resource tree")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-10-18 17:21:14 +01:00
Michał Mirosław
ed0302e830 dm crypt: make workqueue names device-specific
Make cpu-usage debugging easier by naming workqueues per device.

Example ps output:

root       413  0.0  0.0      0     0 ?        I<   paź02   0:00  [kcryptd_io/253:0]
root       414  0.0  0.0      0     0 ?        I<   paź02   0:00  [kcryptd/253:0]
root       415  0.0  0.0      0     0 ?        S    paź02   1:10  [dmcrypt_write/253:0]
root       465  0.0  0.0      0     0 ?        I<   paź02   0:00  [kcryptd_io/253:2]
root       466  0.0  0.0      0     0 ?        I<   paź02   0:00  [kcryptd/253:2]
root       467  0.0  0.0      0     0 ?        S    paź02   2:06  [dmcrypt_write/253:2]
root     15359  0.2  0.0      0     0 ?        I<   19:43   0:25  [kworker/u17:8-kcryptd/253:0]
root     16563  0.2  0.0      0     0 ?        I<   20:10   0:18  [kworker/u17:0-kcryptd/253:2]
root     23205  0.1  0.0      0     0 ?        I<   21:21   0:04  [kworker/u17:4-kcryptd/253:0]
root     13383  0.1  0.0      0     0 ?        I<   21:32   0:02  [kworker/u17:2-kcryptd/253:2]
root      2610  0.1  0.0      0     0 ?        I<   21:42   0:01  [kworker/u17:12-kcryptd/253:2]
root     20124  0.1  0.0      0     0 ?        I<   21:56   0:01  [kworker/u17:1-kcryptd/253:2]

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-18 12:17:17 -04:00
Yangtao Li
e45506ac0a softirq: Fix typo in __do_softirq() comments
s/s/as

[ mingo: Also add a missing 'the', add proper punctuation and clarify what 'swap' means here. ]

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: alexander.levin@verizon.com
Cc: frederic@kernel.org
Cc: joel@joelfernandes.org
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20181018142133.12341-1-tiny.windzz@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-18 18:10:23 +02:00
Michał Mirosław
f349b0a3e1 dm: add dm_table_device_name()
Add a shortcut for dm_device_name(dm_table_get_md(t)).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-18 12:10:02 -04:00
Wenwen Wang
800a7340ab dm ioctl: harden copy_params()'s copy_from_user() from malicious users
In copy_params(), the struct 'dm_ioctl' is first copied from the user
space buffer 'user' to 'param_kernel' and the field 'data_size' is
checked against 'minimum_data_size' (size of 'struct dm_ioctl' payload
up to its 'data' member).  If the check fails, an error code EINVAL will be
returned.  Otherwise, param_kernel->data_size is used to do a second copy,
which copies from the same user-space buffer to 'dmi'.  After the second
copy, only 'dmi->data_size' is checked against 'param_kernel->data_size'.
Given that the buffer 'user' resides in the user space, a malicious
user-space process can race to change the content in the buffer between
the two copies.  This way, the attacker can inject inconsistent data
into 'dmi' (versus previously validated 'param_kernel').

Fix redundant copying of 'minimum_data_size' from user-space buffer by
using the first copy stored in 'param_kernel'.  Also remove the
'data_size' check after the second copy because it is now unnecessary.

Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-18 11:54:07 -04:00
David Miller
d6afa561e1 perf symbols: Set PLT entry/header sizes properly on Sparc
Using the sh_entsize for both values isn't correct.  It happens to be
correct on x86...

For both 32-bit and 64-bit sparc, there are four PLT entries in the PLT
section.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: David Tolnay <dtolnay@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Fixes: b2f7605076 ("perf symbols: Fix plt entry calculation for ARM and AARCH64")
Link: http://lkml.kernel.org/r/20181017.120859.2268840244308635255.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-18 11:19:44 -03:00
David Miller
d87b9790b3 perf jitdump: Add Sparc support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20181016.211545.1487970139012324624.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-18 11:16:38 -03:00
David Miller
0ab4188664 perf annotate: Add Sparc support
E.g.:

  $ perf annotate --stdio2
  Samples: 7K of event 'cycles:ppp', 4000 Hz, Event count (approx.): 3086733887
  __gettimeofday  /lib32/libc-2.27.so [Percent: local period]
  Percent│
         │
         │
         │    Disassembly of section .text:
         │
         │    000a6fa0 <__gettimeofday@@GLIBC_2.0>:
    0.47 │      save   %sp, -96, %sp
    0.73 │      sethi  %hi(0xe9000), %l7
         │    → call   __frame_state_for@@GLIBC_2.0+0x480
    0.30 │      add    %l7, 0x58, %l7     ! e9058 <nftw64@@GLIBC_2.3.3+0x818>
    1.33 │      mov    %i0, %o0
         │      mov    %i1, %o1
    0.43 │      mov    0x74, %g1
         │      ta     0x10
   88.92 │    ↓ bcc    30
    2.95 │      clr    %g1
         │      neg    %o0
         │      mov    1, %g1
    0.31 │30:   cmp    %g1, 0
         │      bne,pn %icc, a6fe4 <__gettimeofday@@GLIBC_2.0+0x44>
         │      mov    %o0, %i0
    1.96 │    ← return %i7 + 8
    2.62 │      nop
         │      sethi  %hi(0), %g1
         │      neg    %o0, %g2
         │      add    %g1, 0x160, %g1
         │      ld     [ %l7 + %g1 ], %g1
         │      st     %g2, [ %g7 + %g1 ]
         │    ← return %i7 + 8
         │      mov    -1, %o0

Signed-off-by: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20181016.205555.1070918198627611771.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-18 11:16:38 -03:00
Alexey Budankov
cf7905165f perf record: Encode -k clockid frequency into Perf trace
Store -k clockid frequency into Perf trace to enable timestamps
derived metrics conversion into wall clock time on reporting stage.

Below is the example of perf report output:

  tools/perf/perf record -k raw -- ../../matrix/linux/matrix.gcc
  ...
  [ perf record: Captured and wrote 31.222 MB perf.data (818054 samples) ]

  tools/perf/perf report --header
  # ========
  ...
  # event : name = cycles:ppp, , size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, use_clockid = 1, clockid = 4
  ...
  # clockid frequency: 1000 MHz
  ...
  # ========

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/23a4a1dc-b160-85a0-347d-40a2ed6d007b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-18 11:16:38 -03:00
Arnaldo Carvalho de Melo
ce6c9da111 Merge remote-tracking branch 'tip/perf/urgent' into perf/core
To pick up fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-10-18 11:13:01 -03:00
Christophe Leroy
a0e102914a powerpc/io: remove old GCC version implementation
GCC 4.6 is the minimum supported now.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Michael Ellerman
23ad1a2700 powerpc: Add -Werror at arch/powerpc level
Back when I added -Werror in commit ba55bd7436 ("powerpc: Add
configurable -Werror for arch/powerpc") I did it by adding it to most
of the arch Makefiles.

At the time we excluded math-emu, because apparently it didn't build
cleanly. But that seems to have been fixed somewhere in the interim.

So move the -Werror addition to the top-level of the arch, this saves
us from repeating it in every Makefile and means we won't forget to
add it to any new sub-dirs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Michael Ellerman
c47ca98d32 powerpc: Move core kernel logic into arch/powerpc/Kbuild
This is a nice cleanup, arch/powerpc/Makefile is long and messy so
moving this out helps a little.

It also allows us to do:

  $ make arch/powerpc

Which can be helpful if you just want to compile test some changes to
arch code and not link everything.

Finally it also gives us a single place to do subdir-cc-flags
assignments which affect the whole of arch/powerpc, which we will do
in a future patch.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
fc0c8b36d3 macintosh/windfarm_smu_sat: Fix debug output
There's some antiquated debug output that's trying
to do a hand-made hexdump and turning into horrible
1-byte-per-line output these days.

Use print_hex_dump() instead

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Christophe Leroy
bd03fd84a5 powerpc/traps: remove redundant in_interrupt panic in die()
do_exit() already includes a test to panic() is in_interrupt()

This patch removes powerpc one which is redundant.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
f1f208e54d powerpc/prom_init: Generate "phandle" instead of "linux, phandle"
When creating the boot-time FDT from an actual Open Firmware live
tree, let's generate "phandle" properties for the phandles instead
of the old deprecated "linux,phandle".

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Unsplit warning printf()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
2c51d97ee8 powerpc: Check prom_init for disallowed sections
prom_init.c must not modify the kernel image outside
of the .bss.prominit section. Thus make sure that
prom_init.o doesn't have anything in any of these:

	.data
	.bss
	.init.data

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
5f69e38885 powerpc/prom_init: Move __prombss to it's own section and store it in .bss
This makes __prombss its own section, and for now store
it in .bss.

This will give us the ability later to store it elsewhere
and/or free it after boot (it's about 8KB).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
8ca2d5151e powerpc/prom_init: Move a few remaining statics to appropriate sections
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
d00e34b92c powerpc/prom_init: Move const structures to __initconst
As they are no longer used past the end of prom_init

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
a614f52e75 powerpc/prom_init: Move ibm_arch_vec to __prombss
Make the existing initialized definition constant and copy
it to a __prombss copy

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
c886087cae powerpc/prom_init: Move prom_radix_disable to __prombss
Initialize it dynamically instead of statically

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
11fdb30934 powerpc/prom_init: Remove support for OPAL v2
We removed support for running under any OPAL version
earlier than v3 in 2015 (they never saw the light of day
anyway), but we kept some leftovers of this support in
prom_init.c, so let's take it out.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Benjamin Herrenschmidt
e63334e556 powerpc/prom_init: Replace __initdata with __prombss when applicable
This replaces all occurrences of __initdata for uninitialized
data with a new __prombss

Currently __promdata is defined to be __initdata but we'll
eventually change that.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Oliver O'Halloran
b5beae5e22 powerpc/pseries: Add driver for PAPR SCM regions
Adds a driver that implements support for enabling and accessing PAPR
SCM regions. Unfortunately due to how the PAPR interface works we can't
use the existing of_pmem driver (yet) because:

 a) The guest is required to use the H_SCM_BIND_MEM h-call to add
    add the SCM region to it's physical address space, and
 b) There is currently no mechanism for relating a bare of_pmem region
    to the backing DIMM (or not-a-DIMM for our case).

Both of these are easily handled by rolling the functionality into a
seperate driver so here we are...

Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Oliver O'Halloran
4c5d87db49 powerpc/pseries: PAPR persistent memory support
This patch implements support for discovering storage class memory
devices at boot and for handling hotplug of new regions via RTAS
hotplug events.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Fix CONFIG_MEMORY_HOTPLUG=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Christophe Leroy
422123ccb9 powerpc/traps: fix machine check handlers to use pr_cont()
When printing the machine check cause, the cause appears on the
following line due to bad use of printk without \n:

[   33.663993] Machine check in kernel mode.
[   33.664011] Caused by (from SRR1=9032):
[   33.664036] Data access error at address c90c8000

This patch fixes it by using pr_cont() for the second part:

[  133.258131] Machine check in kernel mode.
[  133.258146] Caused by (from SRR1=9032): Data access error at address c90c8000

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Christophe Leroy
bde1a1335c powerpc/book3e: redefine pte_mkprivileged() and pte_mkuser()
Book3e defines both _PAGE_USER and _PAGE_PRIVILEGED, so the nohash
default pte_mkprivileged() and pte_mkuser() are not usable.

This patch redefines them for book3e.

In theorie, only pte_mkprivileged() needs to be redefined because
_PAGE_USER includes _PAGE_PRIVILEGED, but it is less confusing
to redefine both.

Fixes: a0da4bc166 ("powerpc/mm: Allow platforms to redefine some helpers")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Aneesh Kumar K.V
b9fb4480a3 powerpc/mm: Make pte_pgprot return all pte bits
Other archs do the same and instead of adding required pte bits (which
got masked out) in __ioremap_at(), make sure we filter only pfn bits
out.

Fixes: 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19 00:56:17 +11:00
Philipp Klocke
eb7ebfa3c1 ALSA: i2c/cs8427: Fix int to char conversion
Compiling with clang yields the following warning:

sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int'
to 'char' changes value from 160 to -96 [-Wconstant-conversion]
    data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
            ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

Because CS8427_REG_AUTOINC is defined as 128, it is too big for a
char field.
So change data from char to unsigned char, that it can hold the value.

This patch does not change the generated code.

Signed-off-by: Philipp Klocke <philipp97kl@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-18 15:44:08 +02:00
Ming Lei
744889b7cb block: don't deal with discard limit in blkdev_issue_discard()
blk_queue_split() does respect this limit via bio splitting, so no
need to do that in blkdev_issue_discard(), then we can align to
normal bio submit(bio_add_page() & submit_bio()).

More importantly, this patch fixes one issue introduced in a22c4d7e34
("block: re-add discard_granularity and alignment checks"), in which
zero discard bio may be generated in case of zero alignment.

Fixes: a22c4d7e34 ("block: re-add discard_granularity and alignment checks")
Cc: stable@vger.kernel.org
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Tested-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18 07:23:40 -06:00
Greg Kroah-Hartman
89303c7ea7 USB-serial updates for v4.20-rc1
Here are the USB-serial updates for 4.20-rc1, including:
 
  - support for CBUS GPIO on FTDI devices (FTX and FT232R)
  - fix of a long-standing transfer-length bug
 
 Included are also various clean ups.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Johan Hovold <johan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEHszNKQClByu0A+9RQQ3kT97htJUFAlvIZhIRHGpvaGFuQGtl
 cm5lbC5vcmcACgkQQQ3kT97htJUNIQ//fv+Jn/XQ4H9Ystik+uJbHOSXYG0OJPkz
 IYZcFdlJBwdH9fF0Bof6vRVIlltJH6ZE636qWZi4D0fuS+pjGoyV3XXYAmiJc+d3
 jXZSvuib08s89SYz2sK8CYrlgZYnMkn/HO8SIs/dLE81HvGpb+3qS0kcqBoepo5f
 MP6TA4jBcRkLVe9gEvgNDwm+Vc1I9Myg6Co5SClaNZRnuj4UyreqX1DIp2lU3evw
 gMq1AHZkwijrdES1FbW9SQ4cVujG3KXbKCrrQyXMcTNPX+4BlayiEqC12eNcoP2Q
 Ng1IAXTZWP1jFCDWZ5B2gn6r0jGILn2leFKcazt9B5lN/YTE51YgbV2JHlnc+8IV
 z1dOs3IIINfwTchh8DSW9nS1j8krFzrGebXlcMApuSqq7s7MGZVy7P48FsgtUd6Y
 B2msIjAWxnLf4XQcKWLA9tZj5stBNInSfFFHi4oUhC/A62teC/XFF8505N9y9MVr
 PhgWnH2zd7cayuUoHQTVvVpvmnRyJBLmyawqSCGLQvo22II58zvsvRX7K/Mop1WB
 u7+dxVfVb+fgpBM5RjfNRK/qXux7BqgXQFhNzzCREiKDi+Mv+2VOe3rmXOi8bMHs
 SKY2r70Fk1ihmxSTcUMCTG1bc3BNZwpccgpW9vWw5Kia3lo3JUgd8OSIfxFnLi03
 /GAnh8pnSh8=
 =V6Jo
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-4.20-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v4.20-rc1

Here are the USB-serial updates for 4.20-rc1, including:

 - support for CBUS GPIO on FTDI devices (FTX and FT232R)
 - fix of a long-standing transfer-length bug

Included are also various clean ups.

All have been in linux-next with no reported issues.

Signed-off-by: Johan Hovold <johan@kernel.org>

* tag 'usb-serial-4.20-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  USB: serial: cypress_m8: fix interrupt-out transfer length
  USB: serial: ftdi_sio: add support for FT232R CBUS gpios
  USB: serial: ftdi_sio: fix gpio name collisions
  USB: serial: ftdi_sio: implement GPIO support for FT-X devices
  USB: serial: cypress_m8: fix spelling mistake "retreiving" -> "retrieving"
2018-10-18 14:59:04 +02:00
Rafael J. Wysocki
0a1875ad29 Merge branches 'acpi-property' and 'acpi-sbs'
* acpi-property:
  ACPI / property: Switch to bitmap_zalloc()

* acpi-sbs:
  ACPI / SBS: Fix rare oops when removing modules
  ACPI / SBS: Fix GPE storm on recent MacBookPro's
2018-10-18 12:37:51 +02:00
Rafael J. Wysocki
1f825f74c1 Merge branches 'acpi-soc', 'acpi-processor', 'acpi-pmic', 'acpi-cppc' and 'acpi-tad'
* acpi-soc:
  ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq
  ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller
  ACPI / LPSS: Add a device link from the GPU to the CHT I2C7 controller
  ACPI / LPSS: Make acpi_lpss_find_device() also find PCI devices
  ACPI / LPSS: Make hid_uid_match helper accept a NULL uid argument
  ACPI / LPSS: Make hid_uid_match helper take an acpi_device as first argument
  ACPI / LPSS: Exclude I2C busses shared with PUNIT from pmc_atom_d3_mask
  ACPI / LPSS: Add alternative ACPI HIDs for Cherry Trail DMA controllers

* acpi-processor:
  ACPI / processor: Fix the return value of acpi_processor_ids_walk()

* acpi-pmic:
  ACPI / PMIC: Convert drivers to use SPDX identifier
  ACPI / PMIC: Sort headers alphabetically

* acpi-cppc:
  mailbox: PCC: handle parse error

* acpi-tad:
  ACPI: TAD: Add low-level support for real time capability
2018-10-18 12:37:27 +02:00
Rafael J. Wysocki
bd371e088b Merge branches 'acpi-init', 'acpi-osl', 'acpi-bus', 'acpi-tables' and 'acpi-misc'
* acpi-init:
  ACPI: probe ECDT before loading AML tables regardless of module-level code flag

* acpi-osl:
  ACPI / OSL: Use 'jiffies' as the time bassis for acpi_os_get_timer()

* acpi-bus:
  ACPI / glue: Split dev_is_platform() out of module for wide use

* acpi-tables:
  ACPI/PPTT: Handle architecturally unknown cache types
  drivers: base: cacheinfo: Do not populate sysfs for unknown cache types

* acpi-misc:
  ACPI: remove redundant 'default n' from Kconfig
  ACPI: custom_method: remove meaningless null check before debugfs_remove()
2018-10-18 12:37:11 +02:00
Rafael J. Wysocki
cc19b05e38 Merge branches 'pm-devfreq' and 'pm-tools'
* pm-devfreq:
  PM / devfreq: remove redundant null pointer check before kfree
  PM / devfreq: stopping the governor before device_unregister()
  PM / devfreq: Convert to using %pOFn instead of device_node.name
  PM / devfreq: Make update_devfreq() public
  PM / devfreq: Don't adjust to user limits in governors
  PM / devfreq: Fix handling of min/max_freq == 0
  PM / devfreq: Drop custom MIN/MAX macros
  PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.

* pm-tools:
  PM / tools: sleepgraph and bootgraph: upgrade to v5.2
  PM / tools: sleepgraph: first batch of v5.2 changes
  cpupower: Fix coredump on VMWare
  cpupower: Fix AMD Family 0x17 msr_pstate size
  cpupower: remove stringop-truncation waring
2018-10-18 12:28:12 +02:00
Rafael J. Wysocki
5d113aa679 Merge branches 'pm-opp' and 'powercap'
* pm-opp:
  PM / OPP: _of_add_opp_table_v2(): increment count only if OPP is added
  cpufreq: dt: Try freeing static OPPs only if we have added them
  OPP: Return error on error from dev_pm_opp_get_opp_count()
  OPP: Improve error handling in dev_pm_opp_of_cpumask_add_table()
  OPP: Pass OPP table to _of_add_opp_table_v{1|2}()
  OPP: Prevent creating multiple OPP tables for devices sharing OPP nodes
  OPP: Use a single mechanism to free the OPP table
  OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()
  cpufreq: mvebu: Remove OPPs using dev_pm_opp_remove()
  OPP: Create separate kref for static OPPs list
  OPP: Don't take OPP table's kref for static OPPs
  OPP: Parse OPP table's DT properties from _of_init_opp_table()
  OPP: Pass index to _of_init_opp_table()
  OPP: Protect dev_list with opp_table lock
  OPP: Don't try to remove all OPP tables on failure
  OPP: Free OPP table properly on performance state irregularities

* powercap:
  powercap: RAPL: Get rid of custom RAPL_CPU() macro
2018-10-18 12:27:51 +02:00
Rafael J. Wysocki
3f858ae02c Merge branches 'acpi-pm' and 'pm-sleep'
* acpi-pm:
  ACPI / PM: LPIT: Register sysfs attributes based on FADT

* pm-sleep:
  x86-32, hibernate: Adjust in_suspend after resumed on 32bit system
  x86-32, hibernate: Set up temporary text mapping for 32bit system
  x86-32, hibernate: Switch to relocated restore code during resume on 32bit system
  x86-32, hibernate: Switch to original page table after resumed
  x86-32, hibernate: Use the page size macro instead of constant value
  x86-32, hibernate: Use temp_pgt as the temporary page table
  x86, hibernate: Rename temp_level4_pgt to temp_pgt
  x86-32, hibernate: Enable CONFIG_ARCH_HIBERNATION_HEADER on 32bit system
  x86, hibernate: Extract the common code of 64/32 bit system
  x86-32/asm/power: Create stack frames in hibernate_asm_32.S
  PM / hibernate: Check the success of generating md5 digest before hibernation
  x86, hibernate: Fix nosave_regions setup for hibernation
  PM / sleep: Show freezing tasks that caused a suspend abort
  PM / hibernate: Documentation: fix image_size default value
2018-10-18 12:27:30 +02:00
Rafael J. Wysocki
d1551f7a5a Merge branch 'pm-cpufreq'
* pm-cpufreq:
  cpufreq: tegra186: don't pass GFP_DMA32 to dma_alloc_coherent()
  cpufreq: conservative: Take limits changes into account properly
  Documentation: intel_pstate: Add base_frequency information
  cpufreq: intel_pstate: Add base_frequency attribute
  ACPI / CPPC: Add support for guaranteed performance
  cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull
  cpufreq: dt-platdev: allow RK3399 to have separate tunables per cluster
  cpufreq / CPPC: Mark acpi_ids as used
  cpufreq: dt: Add support for r8a7744
  cpufreq: Convert to using %pOFn instead of device_node.name
  cpufreq: remove unnecessary unlikely()
2018-10-18 12:26:11 +02:00
Rafael J. Wysocki
41fd838cda Merge branch 'pm-cpuidle'
* pm-cpuidle:
  cpuidle: menu: Avoid computations when result will be discarded
  cpuidle: menu: Drop redundant comparison
  cpuidle: menu: Simplify checks related to the polling state
  cpuidle: poll_state: Revise loop termination condition
  cpuidle: menu: Move the latency_req == 0 special case check
  cpuidle: menu: Avoid computations for very close timers
  cpuidle: menu: Do not update last_state_idx in menu_select()
  cpuidle: menu: Get rid of first_idx from menu_select()
  cpuidle: menu: Compute first_idx when latency_req is known
  cpuidle: menu: Fix wakeup statistics updates for polling state
  cpuidle: menu: Replace data->predicted_us with local variable
  cpuidle: enter_state: Don't needlessly calculate diff time
  cpuidle: Remove unnecessary wrapper cpuidle_get_last_residency()
  intel_idle: Get rid of custom ICPU() macro
2018-10-18 12:26:00 +02:00
Ulf Hansson
e5089c2c73 PM / Domains: Document flags for genpd
The current documented description of the GENPD_FLAG_* flags, are too
simplified, so let's extend them.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18 12:25:10 +02:00
Ulf Hansson
2c9b7f8772 PM / Domains: Deal with multiple states but no governor in genpd
A caller of pm_genpd_init() that provides some states for the genpd via the
->states pointer in the struct generic_pm_domain, should also provide a
governor. This because it's the job of the governor to pick a state that
satisfies the constraints.

Therefore, let's print a warning to inform the user about such bogus
configuration and avoid to bail out, by instead picking the shallowest
state before genpd invokes the ->power_off() callback.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18 12:25:09 +02:00
Ulf Hansson
2c36168480 PM / Domains: Don't treat zero found compatible idle states as an error
Instead of returning -EINVAL from of_genpd_parse_idle_states() in case none
compatible states was found, let's return 0 to indicate success. Assign
also the out-parameter *states to NULL and *n to 0, to indicate to the
caller that zero states have been found/allocated.

This enables the caller of of_genpd_parse_idle_states() to easier act on
the returned error code.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-18 12:25:09 +02:00
Rafael J. Wysocki
3c88a889b4 Merge branch 'acpica'
* acpica:
  ACPICA: Remove acpi_gbl_group_module_level_code and only use acpi_gbl_execute_tables_as_methods instead
  ACPICA: AML Parser: fix parse loop to correctly skip erroneous extended opcodes
  ACPICA: AML interpreter: add region addresses in global list during initialization
  ACPICA: Update version to 20181003
  ACPICA: Never run _REG on system_memory and system_IO
  ACPICA: Split large interpreter file
  ACPICA: Update for field unit access
  ACPICA: Rename some of the Field Attribute defines
  ACPICA: Update for generic_serial_bus and attrib_raw_process_bytes protocol
2018-10-18 12:20:59 +02:00
Eric Sandeen
fa520c47ea fscache: Fix out of bound read in long cookie keys
fscache_set_key() can incur an out-of-bounds read, reported by KASAN:

 BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x5b3/0x680 [fscache]
 Read of size 4 at addr ffff88084ff056d4 by task mount.nfs/32615

and also reported by syzbot at https://lkml.org/lkml/2018/7/8/236

  BUG: KASAN: slab-out-of-bounds in fscache_set_key fs/fscache/cookie.c:120 [inline]
  BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x7a9/0x880 fs/fscache/cookie.c:171
  Read of size 4 at addr ffff8801d3cc8bb4 by task syz-executor907/4466

This happens for any index_key_len which is not divisible by 4 and is
larger than the size of the inline key, because the code allocates exactly
index_key_len for the key buffer, but the hashing loop is stepping through
it 4 bytes (u32) at a time in the buf[] array.

Fix this by calculating how many u32 buffers we'll need by using
DIV_ROUND_UP, and then using kcalloc() to allocate a precleared allocation
buffer to hold the index_key, then using that same count as the hashing
index limit.

Fixes: ec0328e46d ("fscache: Maintain a catalogue of allocated cookies")
Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18 11:32:21 +02:00