Commit graph

797,141 commits

Author SHA1 Message Date
Bart Van Assche
bb2a1d4e80 nvme-core: rework a NQN copying operation
Although it is easy to see that the code in nvme_init_subnqn() guarantees that
the subsys->nqn string is '\0'-terminated, apparently Coverity is not smart
enough to see this. Make it easier for Coverity to analyze this code by changing
the strncpy() call into a strlcpy() call. This patch does not change the
behavior of the code but fixes Coveritiy ID 1423720.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-17 08:58:25 +02:00
Bart Van Assche
eb090c4c94 nvme-core: declare local symbols static
This patch avoids that sparse complains about missing declarations.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-17 08:58:25 +02:00
Bart Van Assche
35da77d556 nvmet-rdma: check for timeout in nvme_rdma_wait_for_cm()
Check whether queue->cm_error holds a value before reading it. This patch
addresses Coverity ID 1373774: unchecked return value.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-17 08:58:24 +02:00
Bart Van Assche
43a6f8fb61 nvmet: use strcmp() instead of strncmp() for subsystem lookup
strncmp() stops comparing when either the end of one of the first two arguments
is reached or when 'n' characters have been compared, whichever comes first.
That means that strncmp(s1, s2, n) is equivalent to strcmp(s1, s2) if n exceeds
the length of s1 or the length of s2. Since that is the case in
nvmet_find_get_subsys(), change strncmp() into strcmp(). This patch avoids that
the following warning is reported by smatch:

drivers/nvme/target/core.c:940:1 nvmet_find_get_subsys() error: strncmp() '"nqn.2014-08.org.nvmexpress.discovery"' too small (37 vs 223)

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-17 08:58:24 +02:00
Chaitanya Kulkarni
48440ab6dc nvmet: remove unreachable code
Get rid of the unreachable code in the nvmet_parse_discovery_cmd().
Keep the error message identical to the admin-cmd.c and io-cmd*.c

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-17 08:58:23 +02:00
Keith Busch
886fabf693 nvme: update node paths after adding new path
The nvme namespace paths were being updated only when the current path
was not set or nonoptimized. If a new path comes online that is a better
path for its NUMA node, the multipath selector may continue using the
previously set path on a potentially further node.

This patch re-runs the path assignment after successfully adding a new
optimized path.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-10-17 08:58:22 +02:00
Bartlomiej Zolnierkiewicz
b3569d3a4b x86/kconfig: Remove redundant 'default n' lines from all x86 Kconfig's
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also, since commit:

  f467c5640c ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols")

... the Kconfig behavior is the same regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Juergen Gross <jgross@suse.co>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20181016134217eucas1p2102984488b89178a865162553369025b%7EeGpI5NlJo0851008510eucas1p2D@eucas1p2.samsung.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-17 08:39:42 +02:00
Waiman Long
0fa809ca7f locking/pvqspinlock: Extend node size when pvqspinlock is configured
The qspinlock code supports up to 4 levels of slowpath nesting using
four per-CPU mcs_spinlock structures. For 64-bit architectures, they
fit nicely in one 64-byte cacheline.

For para-virtualized (PV) qspinlocks it needs to store more information
in the per-CPU node structure than there is space for. It uses a trick
to use a second cacheline to hold the extra information that it needs.
So PV qspinlock needs to access two extra cachelines for its information
whereas the native qspinlock code only needs one extra cacheline.

Freshly added counter profiling of the qspinlock code, however, revealed
that it was very rare to use more than two levels of slowpath nesting.
So it doesn't make sense to penalize PV qspinlock code in order to have
four mcs_spinlock structures in the same cacheline to optimize for a case
in the native qspinlock code that rarely happens.

Extend the per-CPU node structure to have two more long words when PV
qspinlock locks are configured to hold the extra data that it needs.

As a result, the PV qspinlock code will enjoy the same benefit of using
just one extra cacheline like the native counterpart, for most cases.

[ mingo: Minor changelog edits. ]

Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539697507-28084-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-17 08:37:32 +02:00
Waiman Long
1222109a53 locking/qspinlock_stat: Count instances of nested lock slowpaths
Queued spinlock supports up to 4 levels of lock slowpath nesting -
user context, soft IRQ, hard IRQ and NMI. However, we are not sure how
often the nesting happens.

So add 3 more per-CPU stat counters to track the number of instances where
nesting index goes to 1, 2 and 3 respectively.

On a dual-socket 64-core 128-thread Zen server, the following were the
new stat counter values under different circumstances:

         State                         slowpath   index1   index2   index3
         -----                         --------   ------   ------   -------
  After bootup                         1,012,150    82       0        0
  After parallel build + perf-top    125,195,009    82       0        0

So the chance of having more than 2 levels of nesting is extremely low.

[ mingo: Minor changelog edits. ]

Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539697507-28084-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-17 08:37:31 +02:00
Nicholas Mc Guire
11e13696a0 sched/completions/Documentation: Add recommendation for dynamic and ONSTACK completions
To prevent dynamic completion objects from being de-allocated while still
in use, add a recommendation to embed them in long lived data structures.

Also add a note for the on-stack case that emphasizes the dangers of
the limited scope, and recommends dynamic allocation if scope limitations
are not clearly understood.

[ mingo: Minor touch-ups of the text, expanded it a bit to make the
         warnings Nicholas added more prominent. ]

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john.garry@huawei.com
Link: http://lkml.kernel.org/r/1539697539-24055-1-git-send-email-hofrat@osadl.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-17 08:30:10 +02:00
Nathan Chancellor
0797e6f1a8 IB/rxe: Remove unnecessary enum values
Clang warns when an emumerated type is implicitly converted to another.

drivers/infiniband/sw/rxe/rxe.c:106:27: warning: implicit conversion
from enumeration type 'enum rxe_device_param' to different enumeration
type 'enum ib_atomic_cap' [-Wenum-conversion]
        rxe->attr.atomic_cap                    = RXE_ATOMIC_CAP;
                                                ~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:131:22: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_port_state' [-Wenum-conversion]
        port->attr.state                = RXE_PORT_STATE;
                                        ~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:132:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
        port->attr.max_mtu              = RXE_PORT_MAX_MTU;
                                        ~ ^~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:133:27: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
        port->attr.active_mtu           = RXE_PORT_ACTIVE_MTU;
                                        ~ ^~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:151:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
                                ib_mtu_enum_to_int(RXE_PORT_ACTIVE_MTU);
                                ~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~
5 warnings generated.

Use the appropriate values from the expected enumerated type so no
conversion needs to happen then remove the unneeded definitions.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-17 00:28:51 -06:00
Helge Deller
34c201ae49 parisc: Include compressed vmlinux file in vmlinuz boot kernel
Change the parisc vmlinuz boot code to include and process the real
compressed vmlinux.gz ELF file instead of a compressed memory dump.
This brings parisc in sync on how it's done on x86_64.

The benefit of this change is that, e.g. for debugging purposes, one can
then extract the vmlinux file out of the vmlinuz which was booted which
wasn't possible before. This can be archieved with the existing
scripts/extract-vmlinux script, which just needs a small tweak to prefer
to extract a compressed file before trying the existing given binary.

The downside of this approach is that due to the extra round of
decompression/ELF processing we need more physical memory installed to
be able to boot a kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
Helge Deller
db139d71c4 extract-vmlinux: Check for uncompressed image as fallback
As on x86-64 and other architectures, the boot kernel on parisc (vmlinuz
and bzImage) contains a full compressed copy of the final kernel
executable (vmlinux.bin.gz), which one should be able to extract with
the extract-vmlinux script.

But on parisc extracting the kernel with extract-vmlinux fails.
Currently the script first checks if the given file is an ELF file
(which is true on parisc) and if so returns it.  Thus on parisc we
unexpectedly get back the vmlinuz boot file instead of the uncompressed
vmlinux image.

This patch fixes this issue by reverting the logic. It now first tries
to find a compression signature in the given file and if that fails it
checks the file itself as fallback.

Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
John David Anglin
1138b6718f parisc: Fix address in HPMC IVA
Helge noticed that the address of the os_hpmc handler was not being
correctly calculated in the hpmc macro.  As a result, PDCE_CHECK would
fail to call os_hpmc:

<Cpu2> e800009802e00000  0000000000000000  CC_ERR_CHECK_HPMC
<Cpu2> 37000f7302e00000  8040004000000000  CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> f600105e02e00000  fffffff0f0c00000  CC_MC_HPMC_MONARCH_SELECTED
<Cpu2> 140003b202e00000  000000000000000b  CC_ERR_HPMC_STATE_ENTRY
<Cpu2> 5600100b02e00000  00000000000001a0  CC_MC_OS_HPMC_LEN_ERR
<Cpu2> 5600106402e00000  fffffff0f0438e70  CC_MC_BR_TO_OS_HPMC_FAILED
<Cpu2> e800009802e00000  0000000000000000  CC_ERR_CHECK_HPMC
<Cpu2> 37000f7302e00000  8040004000000000  CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> 4000109f02e00000  0000000000000000  CC_MC_HPMC_INITIATED
<Cpu2> 4000101902e00000  0000000000000000  CC_MC_MULTIPLE_HPMCS
<Cpu2> 030010d502e00000  0000000000000000  CC_CPU_STOP

The address problem can be seen by dumping the fault vector:

0000000040159000 <fault_vector_20>:
    40159000:   63 6f 77 73     stb r15,-2447(dp)
    40159004:   20 63 61 6e     ldil L%b747000,r3
    40159008:   20 66 6c 79     ldil L%-1c3b3000,r3
        ...
    40159020:   08 00 02 40     nop
    40159024:   20 6e 60 02     ldil L%15d000,r3
    40159028:   34 63 00 00     ldo 0(r3),r3
    4015902c:   e8 60 c0 02     bv,n r0(r3)
    40159030:   08 00 02 40     nop
    40159034:   00 00 00 00     break 0,0
    40159038:   c0 00 70 00     bb,*< r0,sar,40159840 <fault_vector_20+0x840>
    4015903c:   00 00 00 00     break 0,0

Location 40159038 should contain the physical address of os_hpmc:

000000004015d000 <os_hpmc>:
    4015d000:   08 1a 02 43     copy r26,r3
    4015d004:   01 c0 08 a4     mfctl iva,r4
    4015d008:   48 85 00 68     ldw 34(r4),r5

This patch moves the address setup into initialize_ivt to resolve the
above problem.  I tested the change by dumping the HPMC entry after setup:

0000000040209020:  8000240
0000000040209024: 206a2004
0000000040209028: 34630ac0
000000004020902c: e860c002
0000000040209030:  8000240
0000000040209034: 1bdddce6
0000000040209038:   15d000
000000004020903c:      1a0

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
Helge Deller
99a3ae51d5 parisc: Fix exported address of os_hpmc handler
In the C-code we need to put the physical address of the hpmc handler in
the interrupt vector table (IVA) in order to get HPMCs working.  Since
on parisc64 function pointers are indirect (in fact they are function
descriptors) we instead export the address as variable and not as
function.

This reverts a small part of commit f39cce654f ("parisc: Add
cfi_startproc and cfi_endproc to assembly code").

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>    [4.9+]
2018-10-17 08:18:01 +02:00
Helge Deller
3c229b3f2d parisc: Fix map_pages() to not overwrite existing pte entries
Fix a long-existing small nasty bug in the map_pages() implementation which
leads to overwriting already written pte entries with zero, *if* map_pages() is
called a second time with an end address which isn't aligned on a pmd boundry.
This happens for example if we want to remap only the text segment read/write
in order to run alternative patching on the code. Exiting the loop when we
reach the end address fixes this.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
John David Anglin
4dd5b673fa parisc: Purge TLB entries after updating page table entry and set page accessed flag in TLB handler
This patch may resolve some races in TLB handling.  Hopefully, TLB
inserts are accesses and protected by spin lock.

If not, we may need to IPI calls and do local purges on PA 2.0.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
John David Anglin
d27dfa13b9 parisc: Release spinlocks using ordered store
This patch updates the spin unlock code to use an ordered store with
release semanatics.  All prior accesses are guaranteed to be performed
before an ordered store is performed.

Using an ordered store is significantly faster than using the sync
memory barrier.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
Helge Deller
2e37787df0 parisc: Ratelimit dino stuck interrupt warnings
While playing with qemu with an emulated RT8139cp NIC, I faced lots of
the following warnings:
Dino 0x00810000: stuck interrupt 2

This patch ratelimits this warning and reports back that the IRQ was
handled.

Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
Helge Deller
35d8be9c56 parisc: dino: Utilize DINO_MASK_IRQ() macro
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
Helge Deller
e98bc5ee97 parisc: Clean up crash header output
On kernel crash, this is the current output:
Kernel Fault: Code=26 (Data memory access rights trap) regs=(ptrval) (Addr=00000004)

Drop the address of regs, it's of no use for debugging, and show the
faulty address without parenthesis.

Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
Helge Deller
8dbac7746e parisc: Add SYSTEM_INFO and REGISTER TOC PAT functions
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:01 +02:00
John David Anglin
32a7901f6d parisc: Remove PTE load and fault check from L2_ptep macro
This change removes the PTE load and present check from the L2_ptep
macro.  The load and check for kernel pages is now done in the tlb_lock
macro.  This avoids a double load and check for user pages.  The load
and check for user pages is now done inside the lock so the fault
handler can't be called while the entry is being updated.  This version
uses an ordered store to release the lock when the page table entry
isn't present.  It also corrects the check in the non SMP case.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:00 +02:00
John David Anglin
a886c9791a parisc: Reorder TLB flush timing calculation
On boot (mostly reboot), my c8000 sometimes crashes after it prints the
TLB flush threshold.  The lockup is hard.  The front LED flashes red and
the box must be unplugged to reset the error.

I noticed that when the crash occurs the TLB flush threshold is about
one quarter what it is on a successful boot.  If I disabled the
calculation, the crash didn't occur.  There also seemed to be a timing
dependency affecting the crash.  I finally realized that the
flush_tlb_all() timing test runs just after the secondary CPUs are
started.  There seems to be a problem with running flush_tlb_all() too
soon after the CPUs are started.

The timing for the range test always seemed okay.  So, I reversed the
order of the two timing tests and I haven't had a crash at this point so
far.

I added a couple of information messages which I have left to help with
diagnosis if the problem should appear on another machine.

This version reduces the minimum TLB flush threshold to 16 KiB.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:00 +02:00
Christoph Hellwig
7c4ba3d38a parisc: remove the dead ccio-rm-dma driver
This driver has never been wired up due to the life of the Linux
git tree, and has severely bitrotted.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:00 +02:00
Masahiro Yamada
c9dfa0c796 parisc: remove check for minimum required GCC version
Commit cafa0010cd ("Raise the minimum required gcc version to 4.6")
bumped the minimum GCC version to 4.6 for all architectures.

The version check in arch/parisc/Makefile is obsolete now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:00 +02:00
Helge Deller
cd2b852068 parisc: Use PARISC_ITLB_TRAP constant in entry.S
Fixes: 5b00ca0b80 ("parisc: Restore possibility to execute 64-bit applications")
Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17 08:18:00 +02:00
Harsh Jain
a1c6fd4308 crypto: chelsio - Update ntx queue received from cxgb4
Update cxgb4 to send No. of Tx Queue created in lldinfo struct
and use the same ntxq in chcr driver.

This patch depends on following commit
commit  add92a817e
"Fix memory corruption in DMA Mapped buffers"

v2:
Free txq_info in error case as pointed by Lino Sanfilippo.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-17 14:16:19 +08:00
Nathan Chancellor
18e732b803 crypto: ccree - avoid implicit enum conversion
Clang warns when one enumerated type is implicitly converted to another
and this happens in several locations in this driver, ultimately related
to the set_cipher_{mode,config0} functions. set_cipher_mode expects a mode
of type drv_cipher_mode and set_cipher_config0 expects a mode of type
drv_crypto_direction.

drivers/crypto/ccree/cc_ivgen.c:58:35: warning: implicit conversion from
enumeration type 'enum cc_desc_direction' to different enumeration type
'enum drv_crypto_direction' [-Wenum-conversion]
        set_cipher_config0(&iv_seq[idx], DESC_DIRECTION_ENCRYPT_ENCRYPT);

drivers/crypto/ccree/cc_hash.c:99:28: warning: implicit conversion from
enumeration type 'enum cc_hash_conf_pad' to different enumeration type
'enum drv_crypto_direction' [-Wenum-conversion]
                set_cipher_config0(desc, HASH_DIGEST_RESULT_LITTLE_ENDIAN);

drivers/crypto/ccree/cc_aead.c:1643:30: warning: implicit conversion
from enumeration type 'enum drv_hash_hw_mode' to different enumeration
type 'enum drv_cipher_mode' [-Wenum-conversion]
        set_cipher_mode(&desc[idx], DRV_HASH_HW_GHASH);

Since this fundamentally isn't a problem because these values just
represent simple integers for a shift operation, make it clear to Clang
that this is okay by making the mode parameter in both functions an int.

Link: https://github.com/ClangBuiltLinux/linux/issues/46
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-17 14:16:18 +08:00
Horia Geantă
618b5dc483 crypto: caam - add SPDX license identifier to all files
Previously, a tree-wide change added SPDX license identifiers to
files lacking licensing information:
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")

To be consistent update the rest of the files:
-files with license specified by means of MODULE_LICENSE()
-files with complete license text
-Kconfig

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-17 14:16:18 +08:00
Horia Geantă
29e83c7570 crypto: caam/qi - simplify CGR allocation, freeing
CGRs (Congestion Groups) have to be freed by the same CPU that
initialized them.
This is why currently the driver takes special measures; however, using
set_cpus_allowed_ptr() is incorrect - as reported by Sebastian.

Instead of the generic solution of replacing set_cpus_allowed_ptr() with
work_on_cpu_safe(), we use the qman_delete_cgr_safe() QBMan API instead
of qman_delete_cgr() - which internally takes care of proper CGR
deletion.

Link: https://lkml.kernel.org/r/20181005125443.dfhd2asqktm22ney@linutronix.de
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-17 14:14:46 +08:00
Herbert Xu
58c8a86355 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Merge crypto tree to pick up chelsio bug fix.
2018-10-17 14:14:06 +08:00
Jens Axboe
b93f654d73 f2fs: remove request_list check in is_idle()
This doesn't work on stacked devices, and it doesn't work on
blk-mq devices. The request_list is only used on legacy, which
we don't have much of anymore, and soon won't have any of.

Kill the check.

Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: linux-f2fs-devel@lists.sourceforge.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-16 19:09:39 -07:00
YueHaibing
d021613ee3 scsi: lpfc: Remove set but not used variables 'tgtp'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/lpfc/lpfc_debugfs.c: In function 'lpfc_debugfs_nodelist_data':
drivers/scsi/lpfc/lpfc_debugfs.c:553:29: warning:
 variable 'tgtp' set but not used [-Wunused-but-set-variable]

It never used since 2b65e18202 ("scsi: lpfc: NVME Target: Add debugfs support")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:58:05 -04:00
Gustavo A. R. Silva
6940d12b3b scsi: aic94xx: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114988 ("Missing break in switch")
Addresses-Coverity-ID: 114989 ("Missing break in switch")
Addresses-Coverity-ID: 114990 ("Missing break in switch")
Addresses-Coverity-ID: 114991 ("Missing break in switch")
Addresses-Coverity-ID: 114992 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:54:41 -04:00
Nathan Chancellor
20054597f1 scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param
Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
                                                 &addr, param, buf);
                                                        ^~~~~
1 warning generated.

iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:50:06 -04:00
YueHaibing
f41d84d44a scsi: lpfc: Remove set but not used variable 'psli'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/lpfc/lpfc_hbadisc.c: In function 'lpfc_free_tx':
drivers/scsi/lpfc/lpfc_hbadisc.c:5431:19: warning:
 variable 'psli' set but not used [-Wunused-but-set-variable]

Since commit 895427bd01 ("scsi: lpfc: NVME Initiator: Base modifications")
'psli' is not used any more.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:46:46 -04:00
Nathan Chancellor
761c830ec7 scsi: bfa: Avoid implicit enum conversion in bfad_im_post_vendor_event
Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/bfa/bfa_fcs_lport.c:379:26: warning: implicit conversion
from enumeration type 'enum bfa_lport_aen_event' to different
enumeration type 'enum bfa_ioc_aen_event' [-Wenum-conversion]
                                  BFA_AEN_CAT_LPORT, event);
                                                     ^~~~~

The root cause of these warnings is the bfad_im_post_vendor_event
function, which expects a value from enum bfa_ioc_aen_event but there
are multiple instances of values from enums bfa_port_aen_event,
bfa_audit_aen_event, and bfa_lport_aen_event being used in this
function.

Given that this doesn't appear to be a problem since cat helps with
differentiating the events, just change evt's type to int so that no
conversion needs to happen and Clang won't warn. Update aen_type's type
in bfa_aen_entry_s as members that hold enumerated types should be int.

Link: https://github.com/ClangBuiltLinux/linux/issues/147
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:45:12 -04:00
Nathan Chancellor
362b5da3df scsi: isci: Change sci_controller_start_task's return type to sci_status
Clang warns when an enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = sci_controller_start_task(ihost,
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
                return SCI_SUCCESS;
                ~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
        return status;
        ~~~~~~ ^~~~~~

Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:38:47 -04:00
Nathan Chancellor
e9e9a10352 scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler
Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = SCI_IO_FAILURE_RESPONSE_VALID;
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                status = SCI_IO_FAILURE_RESPONSE_VALID;
                       ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:37:43 -04:00
YueHaibing
feb59a3413 scsi: lpfc: Remove set but not used variables 'fc_hdr' and 'hw_page_size'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_sli4_sp_handle_rcqe':
drivers/scsi/lpfc/lpfc_sli.c:13430:26: warning:
 variable 'fc_hdr' set but not used [-Wunused-but-set-variable]

drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_cq_create':
drivers/scsi/lpfc/lpfc_sli.c:14852:11: warning:
 variable 'hw_page_size' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:23:55 -04:00
Varun Prakash
b5a5fe4ef7 scsi: cxgb4i: add DCB support for iSCSI connections
Add IEEE and CEE DCBX support for iSCSI connections.

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 21:22:00 -04:00
Dan Williams
6f07f86c49 acpi, nfit: Introduce nfit_mem flags
In preparation for adding a flag to indicate whether a DIMM publishes a
dirty-shutdown count, convert the existing flags to a bit field.

Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-10-16 17:57:58 -07:00
Daniel Borkmann
44d520eb17 Merge branch 'bpf-sk-msg-peek'
John Fastabend says:

====================
This adds support for the MSG_PEEK flag when redirecting into
an ingress psock sk_msg queue.

The first patch adds some base support to the helpers, then the
feature, and finally we add an option for the test suite to do
a duplicate MSG_PEEK call on every recv to test the feature.

With duplicate MSG_PEEK call all tests continue to PASS.
====================

Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-17 02:30:33 +02:00
John Fastabend
753fb2ee09 bpf: sockmap, add msg_peek tests to test_sockmap
Add tests that do a MSG_PEEK recv followed by a regular receive to
test flag support.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-17 02:30:32 +02:00
John Fastabend
02c558b2d5 bpf: sockmap, support for msg_peek in sk_msg with redirect ingress
This adds support for the MSG_PEEK flag when doing redirect to ingress
and receiving on the sk_msg psock queue. Previously the flag was
being ignored which could confuse applications if they expected the
flag to work as normal.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-17 02:30:32 +02:00
John Fastabend
8734a162c1 bpf: skmsg, improve sk_msg_used_element to work in cork context
Currently sk_msg_used_element is only called in zerocopy context where
cork is not possible and if this case happens we fallback to copy
mode. However the helper is more useful if it works in all contexts.

This patch resolved the case where if end == head indicating a full
or empty ring the helper always reports an empty ring. To fix this
add a test for the full ring case to avoid reporting a full ring
has 0 elements. This additional functionality will be used in the
next patches from recvmsg context where end = head with a full ring
is a valid case.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-17 02:30:31 +02:00
John Fastabend
3f4c3127d3 bpf: sockmap, fix skmsg recvmsg handler to track size correctly
When converting sockmap to new skmsg generic data structures we missed
that the recvmsg handler did not correctly use sg.size and instead was
using individual elements length. The result is if a sock is closed
with outstanding data we omit the call to sk_mem_uncharge() and can
get the warning below.

[   66.728282] WARNING: CPU: 6 PID: 5783 at net/core/stream.c:206 sk_stream_kill_queues+0x1fa/0x210

To fix this correct the redirect handler to xfer the size along with
the scatterlist and also decrement the size from the recvmsg handler.
Now when a sock is closed the remaining 'size' will be decremented
with sk_mem_uncharge().

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-17 02:29:15 +02:00
Gustavo A. R. Silva
9023705192 Input: xen-kbdfront - mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case, I placed the "fall through"
part at the beginning of the code comment, which is what GCC is
expecting to find.

Addresses-Coverity-ID: 114757 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-10-16 17:12:48 -07:00
Gregory CLEMENT
480d99fdc3 clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probe
The parent clock is get only to have its name, and then the clock is no
more used, so we can safely free it using clk_put. Furthermore as between
the successful devm_clk_get() and the devm_clk_put() call we don't exit
the probe function in error so I can use non managed version of clk_get()
and clk_put().

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 16:51:03 -07:00