Commit graph

797,141 commits

Author SHA1 Message Date
Nick Ewalt
df5f470de0 staging: gasket: sysfs: fix attribute release comment
Comments for gasket_sysfs_get_attr() incorrectly describe reference
release procedure.

Signed-off-by: Nick Ewalt <nicholasewalt@google.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:38 +02:00
Nick Ewalt
9edcf710ab staging: gasket: apex: fix sysfs_show
sysfs_show was incorrectly extracting the sysfs_attribute_type from the
gasket_sysfs_attribute. This prevented dispatch from working properly.

Signed-off-by: Nick Ewalt <nicholasewalt@google.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:37 +02:00
Nick Ewalt
4a966fa24a staging: gasket: page_table: simplify gasket_components_to_dev_address
Refactor gasket_components_to_dev_address to be faster and easier to
understand. The old implementation was unnecessarily complex and masked
the page_index for simple addresses but not extended ones. It makes the
most sense for this function to perform no such masking.

Signed-off-by: Nick Ewalt <nicholasewalt@google.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:37 +02:00
Nick Ewalt
bae54fb812 staging: gasket: page_table: fix comment in components_to_dev_address
Comments in components_to_dev_address() describing examples are
inconsistent, fix these to be accurate.

Signed-off-by: Nick Ewalt <nicholasewalt@google.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:37 +02:00
Nick Ewalt
54be7ec988 staging: gasket: page table: fixup error path allocating coherent mem
Correctly clean up data structure state in gasket_alloc_coherent_memory
error path, to ensure no double free on the stale pointer value.

Signed-off-by: Nick Ewalt <nicholasewalt@google.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:37 +02:00
Nick Ewalt
53f8a81d46 staging: gasket: page_table: rearrange gasket_page_table_entry
Rearrange gasket_page_table entry to reduce padding slop.

Signed-off-by: Nick Ewalt <nicholasewalt@google.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:37 +02:00
Nick Ewalt
efa5dcfa8f staging: gasket: page_table: remove unnecessary PTE status set to free
Remove unnecessary ptes[i].status update in gasket_perform_unmapping.
The vaaue will be cleared in the following memset.

Signed-off-by: Nick Ewalt <nicholasewalt@google.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:37 +02:00
Todd Poynor
02d3718633 staging: gasket: page table: remove dead code in coherent mem alloc
gasket_alloc_coherent_memory() has some unnecessary code related to out
of memory checking that will never hit the condition checked, remove.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:37 +02:00
Todd Poynor
b1004491c9 staging: gasket: page table: return valid error code on map fail
Return -EINVAL on mapping failures, instead of -1, which triggers a
checkpatch error.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:30:37 +02:00
Janusz Krzysztofik
9c9f1ddee7 mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap
Commit b9762bebc6 ("gpiolib: Pass bitmaps, not integer arrays, to
get/set array") changed the way GPIO values are passed to
gpiod_get/set_array_value() and friends.  The new code introduced into
mmc_pwrseq_simple_set_gpios_value() incorrectly interpretes the 'value'
argument as a bitmap of GPIO values and assigns it directly to the
'values' bitmap variable passed to gpiod_set_array_value_cansleep()
instead of filling that bitmap with bits equal to the 'value' argument.
As a result, only member 0 of the array is handled correctly.

Moreover, wrong assumption is taken about the 'values' bitmap size not
exceding the number of bits of the 'value' argument type.

Fix it.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-15 16:26:00 +02:00
Randy Dunlap
a7c0b4b80f gpio: fix SNPS_CREG kconfig dependency warning
Fix kconfig warning for GPIO_SNPS_CREG:

WARNING: unmet direct dependencies detected for OF_GPIO
  Depends on [n]: GPIOLIB [=y] && OF [=n] && HAS_IOMEM [=y]
  Selected by [y]:
  - GPIO_SNPS_CREG [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && (ARC || COMPILE_TEST [=y])

Drivers in drivers/gpio/Kconfig depend on OF_GPIO, not select it.
This prevents attempting to build when OF is not enabled.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-15 16:23:44 +02:00
Geert Uytterhoeven
202dc3cc10 serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on
R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before
the DMA channel pointer is initialized.  Hence this fails, and the
driver tries to fall back to PIO.  However, at this early phase in the
initialization sequence, fallback to PIO does not work, leading to a
serial port that cannot receive any data.

Fix this by calling sci_submit_rx() after initialization of the DMA
channel pointer.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 2c4ee23530 ("serial: sh-sci: Postpone DMA release when falling back to PIO")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:20:24 +02:00
YueHaibing
2b9ea543fa pinctrl: renesas: Fix platform_no_drv_owner.cocci warnings
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-15 16:19:44 +02:00
Manivannan Sadhasivam
28e0603c4d pinctrl: mediatek: Make eint_m u16
For SoC's which lacks EINT support, U16_MAX is assigned to both eint_m
and eint_n through macro NO_EINT_SUPPORT. This will generate integer
overflow warning because eint_m is declared as u8 type. Hence modify
the eint_m type to u16.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-15 16:17:01 +02:00
Michal Simek
59eaeba63a of: base: Change logic in of_alias_get_alias_list()
Check compatible string first before setting up bit in bitmap to also
cover cases that allocated bitfield is not big enough.
Show warning about it but let driver to continue to work with allocated
bitfield to keep at least some devices (included console which
is commonly close to serial0) to work.

Fixes: b1078c355d ("of: base: Introduce of_alias_get_alias_list() to check alias IDs")
Fixes: ae1cca3fa3 ("serial: uartps: Change uart ID port allocation")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:16:06 +02:00
Michal Simek
7acf79b6b2 of: base: Fix english spelling in of_alias_get_alias_list()
Fix english spelling in of_alias_get_alias_list().

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: b1078c355d ("of: base: Introduce of_alias_get_alias_list() to check alias IDs")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:16:06 +02:00
Ulrich Hecht
c58a3ae58b serial: sh-sci: do not warn if DMA transfers are not supported
Not all (H)SCIF devices support DMA, and failure to set it up is not
normally a cause for concern. This patch demotes the associated warning to
debug output.

Inspired by BSP patch "sci: sh-sci: Fix transfer sequence of unsupport DMA
transfer" (6beb1f98d3bd30) by Hiromitsu Yamasaki.

Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 16:14:48 +02:00
Honghui Zhang
a7f172ab6a PCI: mediatek: Fix class type for MT7622 to PCI_CLASS_BRIDGE_PCI
commit 101c92dc80 ("PCI: mediatek: Set up vendor ID and class
type for MT7622") erroneously set the class type for MT7622 to
PCI_CLASS_BRIDGE_HOST.

The PCIe controller of MT7622 integrates a Root Port that has type 1
configuration space header and related bridge windows.

The HW default value of this bridge's class type is invalid.

Fix its class type and set it to PCI_CLASS_BRIDGE_PCI to
match the hardware implementation.

Fixes: 101c92dc80 ("PCI: mediatek: Set up vendor ID and class type for MT7622")
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: reworked the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2018-10-15 15:10:30 +01:00
Hans Verkuil
490d84f6d7 media: cec: forgot to cancel delayed work
If the wait for completion was interrupted, then make sure to cancel
any delayed work.

This can only happen if a transmit is waiting for a reply, and you press
Ctrl-C or reboot/poweroff or something like that which interrupts the
thread waiting for the reply and then proceeds to delete the CEC message.

Since the delayed work wasn't canceled, once it would trigger it referred
to stale data and resulted in a kernel oops.

Fixes: 7ec2b3b941 ("cec: add new tx/rx status bits to detect aborts/timeouts")

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-15 09:57:52 -04:00
Hans Ulli Kroll
ef1a2a62cc usb: host: add DT bindings for faraday fotg2
This adds device tree bindings for the Faraday FOTG2
dual-mode host controller.

Cc: devicetree@vger.kernel.org
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 15:57:29 +02:00
Tudor.Ambarus@microchip.com
325b9313ec usb: host: ohci-at91: fix request of irq for optional gpio
atmel,oc-gpio is optional. Request its irq only when atmel,oc is set
in device tree.

devm_gpiod_get_index_optional returns NULL if -ENOENT. Check its
return value for NULL before error, because it is more probable that
atmel,oc is not set.

This fixes the following errors on boards where atmel,oc is not set in
device tree:
[    0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[    0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[    0.970000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 15:57:29 +02:00
Arnd Bergmann
3c53e2352a nvmem: hide unused nvmem_find_cell_by_index function
nvmem_find_cell_by_index() is only called from inside an #ifdef,
so we get a build warning without CONFIG_OF:

drivers/nvmem/core.c:496:1: error: 'nvmem_find_cell_by_index' defined but not used [-Werror=unused-function]

Move it into the same #ifdef as the caller to avoid the warning.

Fixes: e888d445ac ("nvmem: resolve cells from DT at registration time")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 15:56:15 +02:00
Bartosz Golaszewski
098ec84f1a nvmem: lpc18xx_eeprom: remove unused variable
Remove a variable that's no longer used from lpc18xx_eeprom_remove().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 15:56:15 +02:00
Bartosz Golaszewski
cccb3b19e7 nvmem: fix nvmem_cell_get_from_lookup()
We check if the pointer returned by __nvmem_device_get() is not NULL
while we should actually check if it is not IS_ERR(nvmem). Fix it.

While we're at it: fix the next error path where we should assign an
error value to cell before returning.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 15:56:15 +02:00
Rob Herring
badcdff107 nvmem: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[srinivas: rebased on top of next]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 15:56:14 +02:00
Honghui Zhang
074d6f3268 PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic
The Mediatek's host controller has two slots, each with its own control
registers. The host driver needs to identify what slot is connected to
what port in order to access the device's configuration space.

Current code retrieving slot connected to a given endpoint device.

Assuming each slot is connected to one endpoint device as below:

                host bridge
  bus 0 --> __________|_______
           |                  |
           |                  |
         slot 0             slot 1
  bus 1 -->|        bus 2 --> |
           |                  |
         EP 0               EP 1

During PCI enumeration, system software will scan all the PCI devices on
every bus starting from devfn 0. Using PCI_SLOT(devfn) for matching an
endpoint to its slot is erroneous in that the devfn does not contain the
hierarchical bus numbering in it. In order to match an endpoint with its
slot (and related port), the PCI tree must be walked up to the root bus
(where the root ports are situated) and then the PCI_SLOT(devfn)
matching logic can be correctly applied for matching.

This patch fixes the mtk_pcie_find_port() slot matching logic by adding
appropriate PCI tree walking code to retrieve the slot/port a given
endpoint is connected to.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2018-10-15 14:47:54 +01:00
Dan Schatzberg
5571f1e654 fuse: enable caching of symlinks
FUSE file reads are cached in the page cache, but symlink reads are
not. This patch enables FUSE READLINK operations to be cached which
can improve performance of some FUSE workloads.

In particular, I'm working on a FUSE filesystem for access to source
code and discovered that about a 10% improvement to build times is
achieved with this patch (there are a lot of symlinks in the source
tree).

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-15 15:43:07 +02:00
Miklos Szeredi
9a2eb24d1a fuse: only invalidate atime in direct read
After sending a synchronous READ request from __fuse_direct_read() we only
need to invalidate atime; none of the other attributes should be changed by
a read().

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-15 15:43:06 +02:00
Miklos Szeredi
802dc0497b fuse: don't need GETATTR after every READ
If 'auto_inval_data' mode is active, then fuse_file_read_iter() will call
fuse_update_attributes(), which will check the attribute validity and send
a GETATTR request if some of the attributes are no longer valid.  The page
cache is then invalidated if the size or mtime have changed.

Then, if a READ request was sent and reply received (which is the case if
the data wasn't cached yet, or if the file is opened for O_DIRECT), the
atime attribute is invalidated.

This will result in the next read() also triggering a GETATTR, ...

This can be fixed by only sending GETATTR if the mode or size are invalid,
we don't need to do a refresh if only atime is invalid.

More generally, none of the callers of fuse_update_attributes() need an
up-to-date atime value, so for now just remove STATX_ATIME from the request
mask when attributes are updated for internal use.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-15 15:43:06 +02:00
Miklos Szeredi
2f1e81965f fuse: allow fine grained attr cache invaldation
This patch adds the infrastructure for more fine grained attribute
invalidation.  Currently only 'atime' is invalidated separately.

The use of this infrastructure is extended to the statx(2) interface, which
for now means that if only 'atime' is invalid and STATX_ATIME is not
specified in the mask argument, then no GETATTR request will be generated.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-10-15 15:43:06 +02:00
Miklos Szeredi
edfa87281f bitops: protect variables in bit_clear_unless() macro
Unprotected naming of local variables within bit_clear_unless() can easily
lead to using the wrong scope.

Noticed this by code review after having hit this issue in set_mask_bits()

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 85ad1d13ee ("md: set MD_CHANGE_PENDING in a atomic region")
Cc: Guoqing Jiang <gqjiang@suse.com>
2018-10-15 15:43:06 +02:00
Miklos Szeredi
18127429a8 bitops: protect variables in set_mask_bits() macro
Unprotected naming of local variables within the set_mask_bits() can easily
lead to using the wrong scope.

Noticed this when "set_mask_bits(&foo->bar, 0, mask)" behaved as no-op.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 00a1a053eb ("ext4: atomically set inode->i_flags in ext4_set_inode_flags()")
Cc: Theodore Ts'o <tytso@mit.edu>
2018-10-15 15:43:06 +02:00
David Howells
f0a7d1883d afs: Fix clearance of reply
The recent patch to fix the afs_server struct leak didn't actually fix the
bug, but rather fixed some of the symptoms.  The problem is that an
asynchronous call that holds a resource pointed to by call->reply[0] will
find the pointer cleared in the call destructor, thereby preventing the
resource from being cleaned up.

In the case of the server record leak, the afs_fs_get_capabilities()
function in devel code sets up a call with reply[0] pointing at the server
record that should be altered when the result is obtained, but this was
being cleared before the destructor was called, so the put in the
destructor does nothing and the record is leaked.

Commit f014ffb025 removed the additional ref obtained by
afs_install_server(), but the removal of this ref is actually used by the
garbage collector to mark a server record as being defunct after the record
has expired through lack of use.

The offending clearance of call->reply[0] upon completion in
afs_process_async_call() has been there from the origin of the code, but
none of the asynchronous calls actually use that pointer currently, so it
should be safe to remove (note that synchronous calls don't involve this
function).

Fix this by the following means:

 (1) Revert commit f014ffb025.

 (2) Remove the clearance of reply[0] from afs_process_async_call().

Without this, afs_manage_servers() will suffer an assertion failure if it
sees a server record that didn't get used because the usage count is not 1.

Fixes: f014ffb025 ("afs: Fix afs_server struct leak")
Fixes: 08e0e7c82e ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15 15:31:47 +02:00
Chaotian Jing
fd82cc3020 mmc: mediatek: drop too much code of tuning method
the tuning code is becoming more and more bloated, let's make the
set cmd/data delay to inline function to avoid too much redundant code.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
a2e6d1f6b3 mmc: mediatek: add MT8183 MMC driver support
MT8183 puts the tune register at top layer, so need add new code
to support it.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
86601d0eac mmc: mediatek: tune CMD/DATA together
for MSDC IP which supports both data tune and async fifo, it can
tune cmd/data together. which can save the time and make the tune
result of CMD more stable as data line are 4bit or 8bit.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
f38a9774dd mmc: mediatek: fix cannot receive new request when msdc_cmd_is_ready fail
when msdc_cmd_is_ready return fail, the req_timeout work has not been
inited and cancel_delayed_work() will return false, then, the request
return directly and never call mmc_request_done().

so need call mod_delayed_work() before msdc_cmd_is_ready()

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
56f6cbbed0 mmc: mediatek: fill the actual clock for mmc debugfs
as the mmc core layer has the mmc->actual_clock, so fill it
and drop msdc_host->sclk.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Chaotian Jing
0b1a69fd83 mmc: dt-bindings: add support for MT8183 SoC
Add the devicetree binding for MT8183 SoC

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 15:00:29 +02:00
Masahiro Yamada
90f8354140 mmc: uniphier-sd: avoid using broken DMA RX channel
host->chan_rx is NULL when UNIPHIER_SD_CAP_BROKEN_DMA_RX quirk flag
is set. In this case, it should not set up DMA.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 14:53:21 +02:00
Masahiro Yamada
b7ced87746 mmc: uniphier-sd: fix DMA disabling
Once DMA is enabled, it is not possible to disable it because
uniphier_sd_dma_endisable() always sets the DMA_ENABLE_DMASDRW bit
regardless of the argument 'enable'. It should disable DMA when
'enable' is false.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 14:53:21 +02:00
Masahiro Yamada
d3dd5db0c1 mmc: tmio: simplify the DMA mode test
host->chan_{rx,tx} represents the DMA capability of the platform.
Even if DMA is supported, there are cases where we want to use PIO,
for example, data length is short enough as commit 5f52c35529
("mmc: tmio: use PIO for short transfers") mentioned.

Regarding the hardware control flow, we are interested in whether DMA
is currently enabled or not, instead of whether the platform has the
DMA capability.

Hence, the several conditionals in tmio_mmc_core.c end up with
checking host->chan_{rx,tx} and !host->force_pio. This is not nice.

Let's flip the flag host->force_pio into host->dma_on.

host->dma_on represents whether the DMA is currently enabled or not.
This flag is set false in the beginning of each command, then should
be set true by tmio_mmc_start_dma() when the DMA is turned on.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 14:52:50 +02:00
Masahiro Yamada
722fb61e2e mmc: tmio: remove TMIO_MMC_HAVE_HIGH_REG flag
TMIO_MMC_HAVE_HIGH_REG is confusing due to its counter-intuitive name.

All the TMIO MMC variants (TMIO MMC, Renesas SDHI, UniPhier SD) actually
have high registers. It is just that each of them implements its own
registers there. The original IP from Panasonic only defines registers
0x00-0xff in the bus_shift=1 review. The register area above them is
platform-dependent.

In fact, TMIO_MMC_HAVE_HIGH_REG is set only by tmio-mmc.c and used to
test the accessibility of CTL_SDIO_REGS. Because it is specific to
the TMIO MFD variant, the right thing to do is to move such registers
to tmio_mmc.c and delete the TMIO_MMC_HAVE_HIGH_REG flag.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 14:39:45 +02:00
Masahiro Yamada
acb9fce730 mmc: tmio: move MFD variant reset to a platform hook
CTL_RESET_SDIO register is specific to the TMIO MFD (tmio_mmc.c).

Add a new hook host->reset() for performing a platform-specific
reset sequence, and move CTL_RESET_SDIO over there.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 14:39:45 +02:00
Fabrizio Castro
60ab43ba6b mmc: renesas_sdhi: Add r8a77470 SDHI1 support
The RZ/G1C (a.k.a. R8A77470) comes with three SDHI interfaces,
SDHI0 and SDHI2 are compatible with the R-Car Gen2 SDHIs, SDHI1
is compatible with R-Car Gen3 SDHIs and it can be used as
eMMC as well. This patch adds driver compatibility, and makes
sure both drivers get compiled for the R8A77470.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 14:39:17 +02:00
Fabrizio Castro
be6f8db406 dt-bindings: mmc: renesas_sdhi: Add r8a77470 support
The RZ/G1C (a.k.a. R8A77470) comes with three SDHI interfaces,
SDHI0 and SDHI2 are compatible with R-Car Gen2 SDHIs, and
SDHI1 is compatible with R-Car Gen3 SDHIs, as it comes with an
internal DMAC, therefore SDHI1 is fully compatible with driver
renesas_sdhi_internal_dmac driver. As a result, the compatible
strings for the R8A77470 SDHI interfaces are a little bit special.
Document SDHI support for the RZ/G1C SoC.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15 14:39:17 +02:00
Sergei Shtylyov
f34c6e6257
spi: sh-msiof: fix deferred probing
Since commit 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
platform_get_irq() can return -EPROBE_DEFER. However, the driver overrides
an error returned by that function with -ENOENT which breaks the deferred
probing. Propagate upstream an error code returned by platform_get_irq()
and remove the bogus "platform" from the error message, while at it...

Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-15 12:15:44 +01:00
Mac Chiang
6530adeaaf
ASoC: Intel: common: Add Kabylake Dialog+Maxim machine driver entry
This patch adds da7219_max98927 machine driver entry into
machine table

Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-15 12:02:37 +01:00
Mac Chiang
bca0ac1d96
ASoC: Intel: Boards: Add KBL Dialog Maxim I2S machine driver
This patch adds Kabylake I2S machine driver with:
DA7219 audio codec(SSP1) and MAXIM98927(SSP0) speaker amplifier.

Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-15 12:02:28 +01:00
Akshu Agrawal
2657c6a903
ASoC: AMD: Add SND_JACK_LINEOUT jack type
Some 3 pole connectors report impedance greater than threshold of
1000Ohm. Thus, da7219 reports them as LINEOUT.
Adding the SND_JACK_LINEOUT type so that we don't fail to detect
any 3 pole jack type.
Also, changing
SND_JACK_HEADPHONE | SND_JACK_MICROPHONE -> SND_JACK_HEADSET

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-15 12:01:32 +01:00