Commit graph

1,294,499 commits

Author SHA1 Message Date
Dmitry Baryshkov
6914968a0b drm/bridge: properly refcount DT nodes in aux bridge drivers
The aux-bridge and aux-hpd-bridge drivers didn't call of_node_get() on
the device nodes further used for dev->of_node and platform data. When
bridge devices are released, the reference counts are decreased,
resulting in refcount underflow / use-after-free warnings. Get
corresponding refcounts during AUX bridge allocation.

Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Fixes: 2a04739139 ("drm/bridge: add transparent bridge helper")
Fixes: 26f4bac3d8 ("drm/bridge: aux-hpd: Replace of_device.h with explicit include")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231216235910.911958-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-12-19 02:06:16 +02:00
Dave Jiang
ace196de69 cxl: Fix unregister_region() callback parameter assignment
In devm_cxl_add_region(), devm_add_action_or_reset() is called by
passing in unregister_region() with data ptr of 'cxlr'. However, in
unregister_region(), the passed in parameter is incorrectly assumed to
be a 'struct device' rather than the 'cxlr' pointer. The code has been
working because 'struct device' is the first member of 'struct
cxl_region'. Issue found by inspection. Fix the assignment so that cxlr
is pointing directly to the passed in parameter.

Not flagged for -stable since there is no functional impact of this fix.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/170258123810.952211.3907381447996426480.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-18 15:35:00 -08:00
Xuxin Xiong
0547692ac1 drm/panel-edp: Add several generic edp panels
Add support for the following 3 panels:
1. BOE NV116WHM-N49 V8.0
2. BOE NV122WUM-N41
3. CSO MNC207QS1-1

Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218095933.2487360-1-xuxinxiong@huaqin.corp-partner.google.com
2023-12-18 15:01:16 -08:00
Mukesh Ojha
aed5ed5959 PM / devfreq: Synchronize devfreq_monitor_[start/stop]
There is a chance if a frequent switch of the governor
done in a loop result in timer list corruption where
timer cancel being done from two place one from
cancel_delayed_work_sync() and followed by expire_timers()
can be seen from the traces[1].

while true
do
        echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor
        echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor
done

It looks to be issue with devfreq driver where
device_monitor_[start/stop] need to synchronized so that
delayed work should get corrupted while it is either
being queued or running or being cancelled.

Let's use polling flag and devfreq lock to synchronize the
queueing the timer instance twice and work data being
corrupted.

[1]
...
..
<idle>-0    [003]   9436.209662:  timer_cancel   timer=0xffffff80444f0428
<idle>-0    [003]   9436.209664:  timer_expire_entry   timer=0xffffff80444f0428  now=0x10022da1c  function=__typeid__ZTSFvP10timer_listE_global_addr  baseclk=0x10022da1c
<idle>-0    [003]   9436.209718:  timer_expire_exit   timer=0xffffff80444f0428
kworker/u16:6-14217    [003]   9436.209863:  timer_start   timer=0xffffff80444f0428  function=__typeid__ZTSFvP10timer_listE_global_addr  expires=0x10022da2b  now=0x10022da1c  flags=182452227
vendor.xxxyyy.ha-1593    [004]   9436.209888:  timer_cancel   timer=0xffffff80444f0428
vendor.xxxyyy.ha-1593    [004]   9436.216390:  timer_init   timer=0xffffff80444f0428
vendor.xxxyyy.ha-1593    [004]   9436.216392:  timer_start   timer=0xffffff80444f0428  function=__typeid__ZTSFvP10timer_listE_global_addr  expires=0x10022da2c  now=0x10022da1d  flags=186646532
vendor.xxxyyy.ha-1593    [005]   9436.220992:  timer_cancel   timer=0xffffff80444f0428
xxxyyyTraceManag-7795    [004]   9436.261641:  timer_cancel   timer=0xffffff80444f0428

[2]

 9436.261653][    C4] Unable to handle kernel paging request at virtual address dead00000000012a
[ 9436.261664][    C4] Mem abort info:
[ 9436.261666][    C4]   ESR = 0x96000044
[ 9436.261669][    C4]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 9436.261671][    C4]   SET = 0, FnV = 0
[ 9436.261673][    C4]   EA = 0, S1PTW = 0
[ 9436.261675][    C4] Data abort info:
[ 9436.261677][    C4]   ISV = 0, ISS = 0x00000044
[ 9436.261680][    C4]   CM = 0, WnR = 1
[ 9436.261682][    C4] [dead00000000012a] address between user and kernel address ranges
[ 9436.261685][    C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[ 9436.261701][    C4] Skip md ftrace buffer dump for: 0x3a982d0
...

[ 9436.262138][    C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S      W  O      5.10.149-android12-9-o-g17f915d29d0c #1
[ 9436.262141][    C4] Hardware name: Qualcomm Technologies, Inc.  (DT)
[ 9436.262144][    C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--)
[ 9436.262161][    C4] pc : expire_timers+0x9c/0x438
[ 9436.262164][    C4] lr : expire_timers+0x2a4/0x438
[ 9436.262168][    C4] sp : ffffffc010023dd0
[ 9436.262171][    C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18
[ 9436.262178][    C4] x27: ffffffd063569dd0 x26: ffffffd063536008
[ 9436.262182][    C4] x25: 0000000000000001 x24: ffffff88f7c69280
[ 9436.262185][    C4] x23: 00000000000000e0 x22: dead000000000122
[ 9436.262188][    C4] x21: 000000010022da29 x20: ffffff8af72b4e80
[ 9436.262191][    C4] x19: ffffffc010023e50 x18: ffffffc010025038
[ 9436.262195][    C4] x17: 0000000000000240 x16: 0000000000000201
[ 9436.262199][    C4] x15: ffffffffffffffff x14: ffffff889f3c3100
[ 9436.262203][    C4] x13: ffffff889f3c3100 x12: 00000000049f56b8
[ 9436.262207][    C4] x11: 00000000049f56b8 x10: 00000000ffffffff
[ 9436.262212][    C4] x9 : ffffffc010023e50 x8 : dead000000000122
[ 9436.262216][    C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8
[ 9436.262220][    C4] x5 : 0000000000000000 x4 : 0000000000000101
[ 9436.262223][    C4] x3 : 0000000000000080 x2 : ffffff889edc155c
[ 9436.262227][    C4] x1 : ffffff8001005200 x0 : ffffff80444f0428
[ 9436.262232][    C4] Call trace:
[ 9436.262236][    C4]  expire_timers+0x9c/0x438
[ 9436.262240][    C4]  __run_timers+0x1f0/0x330
[ 9436.262245][    C4]  run_timer_softirq+0x28/0x58
[ 9436.262255][    C4]  efi_header_end+0x168/0x5ec
[ 9436.262265][    C4]  __irq_exit_rcu+0x108/0x124
[ 9436.262274][    C4]  __handle_domain_irq+0x118/0x1e4
[ 9436.262282][    C4]  gic_handle_irq.30369+0x6c/0x2bc
[ 9436.262286][    C4]  el0_irq_naked+0x60/0x6c

Link: https://lore.kernel.org/all/1700860318-4025-1-git-send-email-quic_mojha@quicinc.com/
Reported-by: Joyyoung Huang <huangzaiyang@oppo.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2023-12-19 07:58:27 +09:00
Andrii Nakryiko
8e432e6197 bpf: Ensure precise is reset to false in __mark_reg_const_zero()
It is safe to always start with imprecise SCALAR_VALUE register.
Previously __mark_reg_const_zero() relied on caller to reset precise
mark, but it's very error prone and we already missed it in a few
places. So instead make __mark_reg_const_zero() reset precision always,
as it's a safe default for SCALAR_VALUE. Explanation is basically the
same as for why we are resetting (or rather not setting) precision in
current state. If necessary, precision propagation will set it to
precise correctly.

As such, also remove a big comment about forward precision propagation
in mark_reg_stack_read() and avoid unnecessarily setting precision to
true after reading from STACK_ZERO stack. Again, precision propagation
will correctly handle this, if that SCALAR_VALUE register will ever be
needed to be precise.

Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org
2023-12-18 23:54:21 +01:00
Linus Walleij
7085e4e2ff intel-pinctrl for v6.8-1
* New agnostic driver to support Lunar Lake and newer platforms
 * New driver for Intel Meteor Point-S (PCH for Meteor Lake-S)
 * Update drivers to use new PM helpers
 * Use RAII for locking in a few drivers (Raag, Andy)
 * Reduce locking scope in some functions (Raag)
 * Miscellaneous cleanups (Raag)
 
 The following is an automated git shortlog grouped by driver:
 
 alderlake:
  -  Switch to use Intel pin control PM ops
 
 baytrail:
  -  Simplify code with cleanup helpers
  -  Move default strength assignment to a switch-case
  -  Factor out byt_gpio_force_input_mode()
  -  Fix types of config value in byt_pin_config_set()
 
 broxton:
  -  Switch to use Intel pin control PM ops
 
 cannonlake:
  -  Switch to use Intel pin control PM ops
 
 cedarfork:
  -  Switch to use Intel pin control PM ops
 
 denverton:
  -  Switch to use Intel pin control PM ops
 
 elkhartlake:
  -  Switch to use Intel pin control PM ops
 
 emmitsburg:
  -  Switch to use Intel pin control PM ops
 
 geminilake:
  -  Switch to use Intel pin control PM ops
 
 icelake:
  -  Switch to use Intel pin control PM ops
 
 intel:
  -  Add Intel Meteor Point pin controller and GPIO support
  -  use the correct _PM_OPS() export macro
  -  Add a generic Intel pin control platform driver
  -  Revert "Unexport intel_pinctrl_probe()"
  -  allow independent COMPILE_TEST
  -  Refactor intel_pinctrl_get_soc_data()
  -  Move default strength assignment to a switch-case
  -  Make PM ops functions static
  -  Provide Intel pin control wide PM ops structure
 
 jasperlake:
  -  Switch to use Intel pin control PM ops
 
 lakefield:
  -  Switch to use Intel pin control PM ops
 
 lewisburg:
  -  Switch to use Intel pin control PM ops
 
 lynxpoint:
  -  Simplify code with cleanup helpers
 
 meteorlake:
  -  Switch to use Intel pin control PM ops
 
 sunrisepoint:
  -  Switch to use Intel pin control PM ops
 
 tangier:
  -  simplify locking using cleanup helpers
  -  Move default strength assignment to a switch-case
  -  Enable 910 Ohm bias
 
 tigerlake:
  -  Switch to use Intel pin control PM ops
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAmWAKiUACgkQb7wzTHR8
 rCgi/A/8CBFdd32S5gp/BIymhXIeU8FTee9khST9eX4Zn3Ox5VUjdDzKIaSk432z
 cJW7ycbAT94YhGVqmHh05pO73qH5LtEGk79ccRWWrAqAT6WmmmYn1OOWPBLOyHdC
 2ekSwmYe64BTk0UoAvYz6/BRFy8o3onET+HYtZwiMNvqdBvdBfCiVtkJK5KmNyPV
 wbNOs1xfA9drH68T7k23UvmbjY84s6t/ftPwws+kh0YmkkR65GASNlS167xxXTbX
 M72mLeY+NJt8fFaawJahQTKhAMc6K7s3udgFh0Gmt1paWsJ6ABu+RIDOaPIWVtAC
 5hMlbYFVC2y3QpjXlW8SWGq2WzoN+hzM/e/KTo2/7QzY/pt95q/TDyE/RJfFWYhS
 PkCTcdzkDjyrOmfbNatumIZZEfoRg7Ddw9Cn1NwDJQrFHAMJhcqsPaxrZ0CtCJYn
 o/1kU7QvlQB3EGZiucQouy8b5yz/96I811htfqvEoNNrtz4g1AI5Wkfw3dusY0jB
 oQaYG2M7fxI4u9AzU5+yfhk2cdxU1dv7+GStSXzc8GcppID5ub8bmpU6mARFFglV
 NJwvS529sP3+XSqvSApS1uZR+fRJFX3Fpo5QMBJm12UOPFLc4EDCnalc48WCLD2q
 yn2uCvssiAEogCKKy8ZAEi8aWlT706eGg5G2+9KhaJ+lfLFGfiA=
 =72T1
 -----END PGP SIGNATURE-----

Merge tag 'intel-pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v6.8-1

* New agnostic driver to support Lunar Lake and newer platforms
* New driver for Intel Meteor Point-S (PCH for Meteor Lake-S)
* Update drivers to use new PM helpers
* Use RAII for locking in a few drivers (Raag, Andy)
* Reduce locking scope in some functions (Raag)
* Miscellaneous cleanups (Raag)

The following is an automated git shortlog grouped by driver:

alderlake:
 -  Switch to use Intel pin control PM ops

baytrail:
 -  Simplify code with cleanup helpers
 -  Move default strength assignment to a switch-case
 -  Factor out byt_gpio_force_input_mode()
 -  Fix types of config value in byt_pin_config_set()

broxton:
 -  Switch to use Intel pin control PM ops

cannonlake:
 -  Switch to use Intel pin control PM ops

cedarfork:
 -  Switch to use Intel pin control PM ops

denverton:
 -  Switch to use Intel pin control PM ops

elkhartlake:
 -  Switch to use Intel pin control PM ops

emmitsburg:
 -  Switch to use Intel pin control PM ops

geminilake:
 -  Switch to use Intel pin control PM ops

icelake:
 -  Switch to use Intel pin control PM ops

intel:
 -  Add Intel Meteor Point pin controller and GPIO support
 -  use the correct _PM_OPS() export macro
 -  Add a generic Intel pin control platform driver
 -  Revert "Unexport intel_pinctrl_probe()"
 -  allow independent COMPILE_TEST
 -  Refactor intel_pinctrl_get_soc_data()
 -  Move default strength assignment to a switch-case
 -  Make PM ops functions static
 -  Provide Intel pin control wide PM ops structure

jasperlake:
 -  Switch to use Intel pin control PM ops

lakefield:
 -  Switch to use Intel pin control PM ops

lewisburg:
 -  Switch to use Intel pin control PM ops

lynxpoint:
 -  Simplify code with cleanup helpers

meteorlake:
 -  Switch to use Intel pin control PM ops

sunrisepoint:
 -  Switch to use Intel pin control PM ops

tangier:
 -  simplify locking using cleanup helpers
 -  Move default strength assignment to a switch-case
 -  Enable 910 Ohm bias

tigerlake:
 -  Switch to use Intel pin control PM ops

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-18 23:42:42 +01:00
Jakub Kicinski
509afc7452 Merge branch 'tools-net-ynl-add-sub-message-support-to-ynl'
Donald Hunter says:

====================
tools/net/ynl: Add 'sub-message' support to ynl

This patchset adds a 'sub-message' attribute type to the netlink-raw
schema and implements it in ynl. This provides support for kind-specific
options attributes as used in rt_link and tc raw netlink families.

A description of the new 'sub-message' attribute type and the
corresponding sub-message definitions is provided in patch 3.

The patchset includes updates to the rt_link spec and a new tc spec that
make use of the new 'sub-message' attribute type.

As mentioned in patch 4, encode support is not yet implemented in ynl
and support for sub-message selectors at a different nest level from the
key attribute is not yet supported. I plan to work on these in follow-up
patches.

Patches 1 is code cleanup in ynl
Patches 2-4 add sub-message support to the schema and ynl with
documentation updates.
Patch 5 adds binary and pad support to structs in netlink-raw.
Patches 6-8 contain specs that use the sub-message attribute type.
Patches 9-13 update ynl-gen-rst and its make target
====================

Link: https://lore.kernel.org/r/20231215093720.18774-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:40:43 -08:00
Donald Hunter
9b0aa2244d tools/net/ynl-gen-rst: Remove extra indentation from generated docs
The output from ynl-gen-rst.py has extra indentation that causes extra
<blockquote> elements to be generated in the HTML output.

Reduce the indentation so that sphinx doesn't generate unnecessary
<blockquote> elements.

Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-14-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:44 -08:00
Donald Hunter
e9d7c59212 tools/net/ynl-gen-rst: Remove bold from attribute-set headings
The generated .rst for attribute-sets currently uses a sub-sub-heading
for each attribute, with the attribute name in bold. This makes
attributes stand out more than the attribute-set sub-headings they are
part of.

Remove the bold markup from attribute sub-sub-headings.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-13-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:44 -08:00
Donald Hunter
e8c32339cf tools/net/ynl-gen-rst: Sort the index of generated netlink specs
The index of netlink specs was being generated unsorted. Sort the output
before generating the index entries.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-12-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:44 -08:00
Donald Hunter
6235b3d8bc tools/net/ynl-gen-rst: Add sub-messages to generated docs
Add a section for sub-messages to the generated .rst files.

Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-11-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:44 -08:00
Donald Hunter
646158f20c doc/netlink: Regenerate netlink .rst files if ynl-gen-rst changes
Add ynl-gen-rst.py to the dependencies for the netlink .rst files in the
doc Makefile so that the docs get regenerated if the ynl-gen-rst.py
script is modified. Use $(Q) to honour V=1 in the rules that run
ynl-gen-rst.py

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-10-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:44 -08:00
Donald Hunter
a1bcfde836 doc/netlink/specs: Add a spec for tc
This is a work-in-progress spec for tc that covers:
 - most of the qdiscs
 - the flower classifier
 - new, del, get for qdisc, chain, class and filter

Notable omissions:
 - most of the stats attrs are left as binary blobs
 - notifications are not yet implemented

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-9-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:44 -08:00
Donald Hunter
6b4b0754ef doc/netlink/specs: use pad in structs in rt_link
The rt_link spec was using pad1, pad2 attributes in structs which
appears in the ynl output. Replace this with the 'pad' type which
doesn't pollute the output.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-8-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:44 -08:00
Donald Hunter
077b6022d2 doc/netlink/specs: Add sub-message type to rt_link family
Start using sub-message selectors in the rt_link spec for the
link-specific 'data' and 'slave-data' attributes.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:44 -08:00
Donald Hunter
8b6811d966 tools/net/ynl: Add binary and pad support to structs for tc
The tc netlink-raw family needs binary and pad types for several
qopt C structs. Add support for them to ynl.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:43 -08:00
Donald Hunter
1769e2be4b tools/net/ynl: Add 'sub-message' attribute decoding to ynl
Implement the 'sub-message' attribute type in ynl.

Encode support is not yet implemented. Support for sub-message selectors
at a different nest level from the key attribute is not yet supported.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:43 -08:00
Donald Hunter
17ed5c1a9e doc/netlink: Document the sub-message format for netlink-raw
Document the spec format used by netlink-raw families like rt and tc.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:43 -08:00
Donald Hunter
de2d98743b doc/netlink: Add sub-message support to netlink-raw
Add a 'sub-message' attribute type with a selector that supports
polymorphic attribute formats for raw netlink families like tc.

A sub-message attribute uses the value of another attribute as a
selector key to choose the right sub-message format. For example if the
following attribute has already been decoded:

  { "kind": "gre" }

and we encounter the following attribute spec:

  -
    name: data
    type: sub-message
    sub-message: linkinfo-data-msg
    selector: kind

Then we look for a sub-message definition called 'linkinfo-data-msg' and
use the value of the 'kind' attribute i.e. 'gre' as the key to choose
the correct format for the sub-message:

  sub-messages:
    name: linkinfo-data-msg
    formats:
      -
        value: bridge
        attribute-set: linkinfo-bridge-attrs
      -
        value: gre
        attribute-set: linkinfo-gre-attrs
      -
        value: geneve
        attribute-set: linkinfo-geneve-attrs

This would decode the attribute value as a sub-message with the
attribute-set called 'linkinfo-gre-attrs' as the attribute space.

A sub-message can have an optional 'fixed-header' followed by zero or
more attributes from an attribute-set. For example the following
'tc-options-msg' sub-message defines message formats that use a mixture
of fixed-header, attribute-set or both together:

  sub-messages:
    -
      name: tc-options-msg
      formats:
        -
          value: bfifo
          fixed-header: tc-fifo-qopt
        -
          value: cake
          attribute-set: tc-cake-attrs
        -
          value: netem
          fixed-header: tc-netem-qopt
          attribute-set: tc-netem-attrs

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:43 -08:00
Donald Hunter
62691b801d tools/net/ynl: Use consistent array index expression formatting
Use expression formatting that conforms to the python style guide.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18 14:39:43 -08:00
Lars-Peter Clausen
6f517e0440
PCI: endpoint: pci-epf-test: Make struct pci_epf_ops const
The pci_epf_ops struct for the PCI endpoint test driver is never modified.

Mark it as const so it can be placed in the read-only section.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230722230848.589428-5-lars@metafoo.de
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18 22:38:19 +00:00
Lars-Peter Clausen
c21b53deda
PCI: endpoint: pci-epf-vntb: Make struct pci_epf_ops const
The pci_epf_ops struct for the PCI endpoint vNTB driver is never modified.

Mark it as const so it can be placed in the read-only section.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230722230848.589428-4-lars@metafoo.de
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18 22:38:16 +00:00
Lars-Peter Clausen
54f22c9758
PCI: endpoint: pci-epf-ntb: Make struct pci_epf_ops const
The pci_epf_ops struct for the PCI endpoint NTB driver is never modified.

Mark it as const so it can be placed in the read-only section.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230722230848.589428-3-lars@metafoo.de
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18 22:38:11 +00:00
Lars-Peter Clausen
150d04ddf3
PCI: endpoint: pci-epf-mhi: Make structs pci_epf_ops and pci_epf_event_ops const
Both the pci_epf_ops and pci_epf_evnt_ops structs for the PCI endpoint
MHI driver are never modified.

Mark them as const so they can be placed in the read-only section.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230722230848.589428-2-lars@metafoo.de
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18 22:38:04 +00:00
Lars-Peter Clausen
8636229304
PCI: endpoint: Make struct pci_epf_ops in pci_epf_driver const
The pci_epf_ops struct contains a set of callbacks that are used by the
pci_epf_driver, and is never modified by the EPF core itself.

Marking the struct pointer const allows EPF drivers to declare their
pci_epf_ops struct to be const.

This allows the struct to be placed in the read-only section. Which
for example brings some security benefits as the callbacks can not be
overwritten.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230722230848.589428-1-lars@metafoo.de
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18 22:37:54 +00:00
Chuck Lever
bd018b98ba SUNRPC: Revert 5f7fc5d69f
Guillaume says:
> I believe commit 5f7fc5d69f ("SUNRPC: Resupply rq_pages from
> node-local memory") in Linux 6.5+ is incorrect. It passes
> unconditionally rq_pool->sp_id as the NUMA node.
>
> While the comment in the svc_pool declaration in sunrpc/svc.h says
> that sp_id is also the NUMA node id, it might not be the case if
> the svc is created using svc_create_pooled(). svc_created_pooled()
> can use the per-cpu pool mode therefore in this case sp_id would
> be the cpu id.

Fix this by reverting now. At a later point this minor optimization,
and the deceptive labeling of the sp_id field, can be revisited.

Reported-by: Guillaume Morin <guillaume@morinfr.org>
Closes: https://lore.kernel.org/linux-nfs/ZYC9rsno8qYggVt9@bender.morinfr.org/T/#u
Fixes: 5f7fc5d69f ("SUNRPC: Resupply rq_pages from node-local memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-12-18 17:10:52 -05:00
Michal Wajdeczko
342fb97892 kunit: Reset test->priv after each param iteration
If we run parameterized test that uses test->priv to prepare some
custom data, then value of test->priv will leak to the next param
iteration and may be unexpected.  This could be easily seen if
we promote example_priv_test to parameterized test as then only
first test iteration will be successful:

$ ./tools/testing/kunit/kunit.py run \
	--kunitconfig ./lib/kunit/.kunitconfig *.example_priv*

[ ] Starting KUnit Kernel (1/1)...
[ ] ============================================================
[ ] =================== example (1 subtest) ====================
[ ] ==================== example_priv_test  ====================
[ ] [PASSED] example value 3
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ]     test->priv == 0000000060dfe290
[ ]     ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 2
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ]     test->priv == 0000000060dfe290
[ ]     ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 1
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ]     test->priv == 0000000060dfe290
[ ]     ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 0
[ ] # example_priv_test: initializing
[ ] # example_priv_test: cleaning up
[ ] # example_priv_test: pass:1 fail:3 skip:0 total:4
[ ] ================ [FAILED] example_priv_test ================
[ ]     # example: initializing suite
[ ]     # module: kunit_example_test
[ ]     # example: exiting suite
[ ] # Totals: pass:1 fail:3 skip:0 total:4
[ ] ===================== [FAILED] example =====================

Fix that by resetting test->priv after each param iteration, in
similar way what we did for the test->status.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:39:05 -07:00
Michal Wajdeczko
2b61582acd kunit: Add example for using test->priv
In a test->priv field the user can store arbitrary data.
Add example how to use this feature in the test code.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:39:00 -07:00
Maxime Ripard
d393acce7b drm/tests: Switch to kunit devices
Kunit recently gained helpers to create test managed devices. This means
that we no longer have to roll our own helpers in KMS and we can reuse
them.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:28:08 -07:00
davidgow@google.com
e57cdff0dd ASoC: topology: Replace fake root_device with kunit_device in tests
Using struct root_device to create fake devices for tests is something
of a hack. The new struct kunit_device is meant for this purpose, so use
it instead.

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:28:08 -07:00
davidgow@google.com
837018388e overflow: Replace fake root_device with kunit_device
Using struct root_device to create fake devices for tests is something
of a hack. The new struct kunit_device is meant for this purpose, so use
it instead.

Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:28:08 -07:00
davidgow@google.com
46ee8f688e fortify: test: Use kunit_device
Using struct root_device to create fake devices for tests is something
of a hack. The new struct kunit_device is meant for this purpose, so use
it instead.

Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:28:08 -07:00
davidgow@google.com
d03c720e03 kunit: Add APIs for managing devices
Tests for drivers often require a struct device to pass to other
functions. While it's possible to create these with
root_device_register(), or to use something like a platform device, this
is both a misuse of those APIs, and can be difficult to clean up after,
for example, a failed assertion.

Add some KUnit-specific functions for registering and unregistering a
struct device:
- kunit_device_register()
- kunit_device_register_with_driver()
- kunit_device_unregister()

These helpers allocate a on a 'kunit' bus which will either probe the
driver passed in (kunit_device_register_with_driver), or will create a
stub driver (kunit_device_register) which is cleaned up on test shutdown.

Devices are automatically unregistered on test shutdown, but can be
manually unregistered earlier with kunit_device_unregister() in order
to, for example, test device release code.

Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:28:08 -07:00
Rae Moar
e9f0e21ceb Documentation: Add debugfs docs with run after boot
Expand the documentation on the KUnit debugfs filesystem on the
run_manual.rst page.

Add section describing how to access results using debugfs.

Add section describing how to run tests after boot using debugfs.

Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:28:08 -07:00
Rae Moar
c72a870926 kunit: add ability to run tests after boot using debugfs
Add functionality to run built-in tests after boot by writing to a
debugfs file.

Add a new debugfs file labeled "run" for each test suite to use for
this purpose.

As an example, write to the file using the following:

echo "any string" > /sys/kernel/debugfs/kunit/<testsuite>/run

This will trigger the test suite to run and will print results to the
kernel log.

To guard against running tests concurrently with this feature, add a
mutex lock around running kunit. This supports the current practice of
not allowing tests to be run concurrently on the same kernel.

This new functionality could be used to design a parameter
injection feature in the future.

Fixed up merge conflict duing rebase to Linux 6.7-rc6
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:25:49 -07:00
Rae Moar
6c4ea2f48d kunit: add is_init test attribute
Add is_init test attribute of type bool. Add to_string, get, and filter
methods to lib/kunit/attributes.c.

Mark each of the tests in the init section with the is_init=true attribute.

Add is_init to the attributes documentation.

Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:15 -07:00
Rae Moar
2cf4528157 kunit: add example suite to test init suites
Add example_init_test_suite to allow for testing the feature of running
test suites marked as init to indicate they use init data and/or
functions.

This suite should always pass and uses a simple init function.

This suite can also be used to test the is_init attribute introduced in
the next patch.

Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:15 -07:00
Rae Moar
d81f0d7b8b kunit: add KUNIT_INIT_TABLE to init linker section
Add KUNIT_INIT_TABLE to the INIT_DATA linker section.

Alter the KUnit macros to create init tests:
kunit_test_init_section_suites

Update lib/kunit/executor.c to run both the suites in KUNIT_TABLE and
KUNIT_INIT_TABLE.

Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:15 -07:00
Rae Moar
69dfdce1c5 kunit: move KUNIT_TABLE out of INIT_DATA
Alter the linker section of KUNIT_TABLE to move it out of INIT_DATA and
into DATA_DATA.

Data for KUnit tests does not need to be in the init section.

In order to run tests again after boot the KUnit data cannot be labeled as
init data as the kernel could write over it.

Add a KUNIT_INIT_TABLE in the next patch for KUnit tests that test init
data/functions.

Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:15 -07:00
Rae Moar
6eb0ea28c8 kunit: tool: add test for parsing attributes
Add test for parsing attributes to kunit_tool_test.py. Test checks
attributes are parsed and saved in the test logs.

This test also checks that the attributes have not interfered with the
parsing of other test information, specifically the suite header as
the test plan was being incorrectely parsed.

Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:15 -07:00
Rae Moar
8ae27bc7ff kunit: tool: fix parsing of test attributes
Add parsing of attributes as diagnostic data. Fixes issue with test plan
being parsed incorrectly as diagnostic data when located after
suite-level attributes.

Note that if there does not exist a test plan line, the diagnostic lines
between the suite header and the first result will be saved in the suite
log rather than the first test case log.

Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:15 -07:00
Richard Fitzgerald
1557e89d3a kunit: debugfs: Handle errors from alloc_string_stream()
In kunit_debugfs_create_suite() give up and skip creating the debugfs
file if any of the alloc_string_stream() calls return an error or NULL.
Only put a value in the log pointer of kunit_suite and kunit_test if it
is a valid pointer to a log.

This prevents the potential invalid dereference reported by smatch:

 lib/kunit/debugfs.c:115 kunit_debugfs_create_suite() error: 'suite->log'
	dereferencing possible ERR_PTR()
 lib/kunit/debugfs.c:119 kunit_debugfs_create_suite() error: 'test_case->log'
	dereferencing possible ERR_PTR()

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 05e2006ce4 ("kunit: Use string_stream for test log")
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:15 -07:00
Richard Fitzgerald
34dfd5bb2e kunit: debugfs: Fix unchecked dereference in debugfs_print_results()
Move the call to kunit_suite_has_succeeded() after the check that
the kunit_suite pointer is valid.

This was found by smatch:

 lib/kunit/debugfs.c:66 debugfs_print_results() warn: variable
 dereferenced before check 'suite' (see line 63)

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 38289a26e1 ("kunit: fix debugfs code to use enum kunit_status, not bool")
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:14 -07:00
Richard Fitzgerald
15bf000014 kunit: string-stream: Allow ERR_PTR to be passed to string_stream_destroy()
Check the stream pointer passed to string_stream_destroy() for
IS_ERR_OR_NULL() instead of only NULL.

Whatever alloc_string_stream() returns should be safe to pass
to string_stream_destroy(), and that will be an ERR_PTR.

It's obviously good practise and generally helpful to also check
for NULL pointers so that client cleanup code can call
string_stream_destroy() unconditionally - which could include
pointers that have never been set to anything and so are NULL.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:14 -07:00
Richard Fitzgerald
37f0d37ffc kunit: string-stream-test: Avoid cast warning when testing gfp_t flags
Passing a gfp_t to KUNIT_EXPECT_EQ() causes a cast warning:

  lib/kunit/string-stream-test.c:73:9: sparse: sparse: incorrect type in
  initializer (different base types) expected long long right_value
  got restricted gfp_t const __right

Avoid this by testing stream->gfp for the expected value and passing the
boolean result of this comparison to KUNIT_EXPECT_TRUE(), as was already
done a few lines above in string_stream_managed_init_test().

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: d1a0d699bf ("kunit: string-stream: Add tests for freeing resource-managed string_stream")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311181918.0mpCu2Xh-lkp@intel.com/
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:14 -07:00
David Gow
a08d4d6284 drm/vc4: tests: Use KUNIT_DEFINE_ACTION_WRAPPER
In order to pass functions to kunit_add_action(), they need to be of the
kunit_action_t type. While casting the function pointer can work, it
will break control-flow integrity.

vc4_mock already defines such a wrapper for drm_dev_unregister(), but it
involves less boilerplate to use the new macro, so replace the manual
implementation.

Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:14 -07:00
David Gow
e847934bb1 drm/tests: Use KUNIT_DEFINE_ACTION_WRAPPER()
In order to pass functions to kunit_add_action(), they need to be of the
kunit_action_t type. While casting the function pointer can work, it
will break control-flow integrity.

drm_kunit_helpers already defines wrappers, but we now have a macro
which does this automatically. Using this greatly reduces the
boilerplate needed.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:14 -07:00
David Gow
56778b49c9 kunit: Add a macro to wrap a deferred action function
KUnit's deferred action API accepts a void(*)(void *) function pointer
which is called when the test is exited. However, we very frequently
want to use existing functions which accept a single pointer, but which
may not be of type void*. While this is probably dodgy enough to be on
the wrong side of the C standard, it's been often used for similar
callbacks, and gcc's -Wcast-function-type seems to ignore cases where
the only difference is the type of the argument, assuming it's
compatible (i.e., they're both pointers to data).

However, clang 16 has introduced -Wcast-function-type-strict, which no
longer permits any deviation in function pointer type. This seems to be
because it'd break CFI, which validates the type of function calls.

This rather ruins our attempts to cast functions to defer them, and
leaves us with a few options. The one we've chosen is to implement a
macro which will generate a wrapper function which accepts a void*, and
casts the argument to the appropriate type.

For example, if you were trying to wrap:
void foo_close(struct foo *handle);
you could use:
KUNIT_DEFINE_ACTION_WRAPPER(kunit_action_foo_close,
			    foo_close,
			    struct foo *);

This would create a new kunit_action_foo_close() function, of type
kunit_action_t, which could be passed into kunit_add_action() and
similar functions.

In addition to defining this macro, update KUnit and its tests to use
it.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-12-18 13:21:14 -07:00
Guilherme G. Piccoli
6eb04ca8c5 HID: nintendo: Prevent divide-by-zero on code
It was reported [0] that adding a generic joycon to the system caused
a kernel crash on Steam Deck, with the below panic spew:

divide error: 0000 [#1] PREEMPT SMP NOPTI
[...]
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0119 10/24/2023
RIP: 0010:nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
[...]
Call Trace:
 [...]
 ? exc_divide_error+0x38/0x50
 ? nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
 ? asm_exc_divide_error+0x1a/0x20
 ? nintendo_hid_event+0x307/0xcc1 [hid_nintendo]
 hid_input_report+0x143/0x160
 hidp_session_run+0x1ce/0x700 [hidp]

Since it's a divide-by-0 error, by tracking the code for potential
denominator issues, we've spotted 2 places in which this could happen;
so let's guard against the possibility and log in the kernel if the
condition happens. This is specially useful since some data that
fills some denominators are read from the joycon HW in some cases,
increasing the potential for flaws.

[0] https://github.com/ValveSoftware/SteamOS/issues/1070

Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Tested-by: Sam Lantinga <slouken@libsdl.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-18 20:46:28 +01:00
Jesse Brandeburg
6aa7ca3c7d idpf: refactor some missing field get/prep conversions
Most of idpf correctly uses FIELD_GET and FIELD_PREP, but a couple spots
were missed so fix those.

Automated conversion with coccinelle script and manually fixed up,
including audits for opportunities to convert to {get,encode,replace}
bits functions.

Add conversions to le16_get/encode/replace_bits where appropriate. And
in one place fix up a cast from a u16 to a u16.

@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)

@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)

@get@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) & mask) >> shift)
+FIELD_GET(mask, a)

and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
 drivers/net/ethernet/intel/

CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-18 11:20:43 -08:00