The first_unset_node() function returns the first unused node in
nodes_found_map. If all nodes are in use, the function returns
MAX_NUMNODES.
Use this return value to determine whether there are any available node
values in nodes_found_map, eliminating the need to use nodes_weight()
for this purpose.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_map_pxm_to_node() function will never return a node value
that is greater than or equal to MAX_NUMNODES. Remove the unnecessary
`node >= MAX_NUMNODES` check to keep the code consistent with other users
of the acpi_map_pxm_to_node() function.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add serial driver data for Google Tensor gs101 SoC and a common
fifoszdt_serial_drv_data that can be used by platforms that specify the
samsung,uart-fifosize DT property.
A corresponding dt-bindings patch updates the yaml to ensure
samsung,uart-fifosize is a required property.
Tested-by: Will McVicker <willmcvicker@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-14-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
cmu_top is the top level clock management unit which contains PLLs, muxes,
dividers and gates that feed the other clock management units.
cmu_misc clocks IPs such as Watchdog and cmu_apm clocks ips part of the
APM module.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-9-peter.griffin@linaro.org
[krzysztof: drop not needed linux/of_device.h include]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
These plls are found in the Tensor gs101 SoC found in the Pixel 6.
pll0516x: Integer PLL with high frequency
pll0517x: Integer PLL with middle frequency
pll0518x: Integer PLL with low frequency
PLL0516x
FOUT = (MDIV * 2 * FIN)/PDIV * 2^SDIV)
PLL0517x and PLL0518x
FOUT = (MDIV * FIN)/PDIV*2^SDIV)
The PLLs are similar enough to pll_0822x that the same code can handle
both. The main difference is the change in the fout formula for the
high frequency 0516 pll.
Locktime for 516,517 & 518 is 150 the same as the pll_0822x lock factor.
MDIV, SDIV PDIV masks and bit shifts are also the same as 0822x.
When defining the PLL the "con" parameter should be set to CON3
register, like this
PLL(pll_0517x, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0,
NULL),
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-8-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Topic branch collecting several changes to Samsung SoC Devicetree
bindings:
1. Add specific compatibles to all Samsung Exynos and Tesla FSD blocks,
because that's what guidelines expect [1] and is generally
recommended practice. Existing compatibles are left untouched, thus
no driver changes are needed. The work only cleans things up, so any
future contributions will use recommended style: specific and
fallback compatibles.
2. Add bindings for new devices: Samsung ExynosAutov920 and Google
GS101.
These bindings are needed for both DTS and drivers, e.g. clock drivers.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmV4tAkQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD13xAD/91TdT8UQEj2ECkWbUh/59FvORGfa6vEigk
WR7Qp3X9vUk5Klj07O9llfSCclhs74eqJgWZWDiViHGxNmyaGmUoY9MVDm4j6dCK
hz0ZEYHrxyXLk71FEsPdY1MBJXEudUP71tJx9MoC8Of0mMXG7FdwGk2VRFhtLs3r
j2RVWCccLkssy+4FNNyDbInDjK4gb1GK+7Vgv234sItzXTXzHSjFNSVFX0CPOPCa
IZfVZciAEwNExEMZ05tJbGD+i2y4XES1ZbX4v32P74EqIDnvFOgr+DCr8kNp0nRP
E0yhO4Lfno67S0jpY4cBmYciZc4Ew8nIi/Gaaf0nv9LodQ3Vgc+D/FnC5V839Za3
L/KKECqs4hX2/M+YiUW7x9AXKs2OJ7bg9VZLH9/JJC9NVlUiZ85EP0oR6iIdjumF
XBwCzgiG1i7ds+30elx5/jDV7WWbpyPUy2pCWQ93nYFUrxmD1bmvp0wjLr52OxEk
rhTpJUvV6baREe3Qeg3S9kGIC3uoPD6oW5Opxwli/Us6HLIHVvKwRXNOd5oLLJ47
GpnT90mAOp9NYZ/ealobgb78wEC95O290MzWqpTSH3/uOkWL5/MARUvBWOkII3Gp
X9e0ODUHKZFrlFgiaQIwfVaHLvPYttTYML7wsNwoYY37Yh7Bb+Tg1cMhHrFUCODi
/2jjH9CZAQ==
=AZHK
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-bindings-refactoring-and-google-gs101-6.8' into next/drivers
Samsung Devicetree bindings topic branch for v6.8
Topic branch collecting several changes to Samsung SoC Devicetree
bindings:
1. Add specific compatibles to all Samsung Exynos and Tesla FSD blocks,
because that's what guidelines expect [1] and is generally
recommended practice. Existing compatibles are left untouched, thus
no driver changes are needed. The work only cleans things up, so any
future contributions will use recommended style: specific and
fallback compatibles.
2. Add bindings for new devices: Samsung ExynosAutov920 and Google
GS101.
These bindings are needed for both DTS and drivers, e.g. clock drivers.
Fix kernel-doc warnings found when using "W=1".
acpi_watchdog.c:85: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
acpi_watchdog.c:85: warning: missing initial short description on line:
* Returns true if this system should prefer ACPI based watchdog instead of
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
166 was skipped by mistake and two clocks:
* CLK_MOUT_CMU_HSI0_USBDPDGB
* CLK_GOUT_HSI0_USBDPDGB
Have an incorrect DGB ending instead of DBG.
This is an ABI break, but as the patch was only applied yesterday this
header has never been in an actual release so it seems better to fix
this early than ignore it.
Fixes: 0a910f1606 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-7-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add google,gs101-usi dedicated compatible for representing USI of Google
GS101 SoC.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-6-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Specifying samsung,uart-fifosize in both DT and driver static data is error
prone and relies on driver probe order and dt aliases to be correct.
Additionally on many Exynos platforms these are (USI) universal serial
interfaces which can be uart, spi or i2c, so it can change per board.
For google,gs101-uart make samsung,uart-fifosize a required property.
For this platform fifosize now *only* comes from DT.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-5-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add dedicated google-gs101-uart compatible to the dt-schema for
representing uart of the Google Tensor gs101 SoC.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-4-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the "google,gs101-wdt" compatible to the dt-schema documentation.
gs101 SoC has two CPU clusters and each cluster has its own dedicated
watchdog timer (similar to exynos850 and exynosautov9 SoCs).
These WDT instances are controlled using different bits in PMU
registers.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-2-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Make the flow for pci shutdown be the same to the pci remove.
iavf_shutdown was implementing an incomplete version
of iavf_remove. It misses several calls to the kernel like
iavf_free_misc_irq, iavf_reset_interrupt_capability, iounmap
that might break the system on reboot or hibernation.
Implement the call of iavf_remove directly in iavf_shutdown to
close this gap.
Fixes below error messages (dmesg) during shutdown stress tests -
[685814.900917] ice 0000:88:00.0: MAC 02:d0:5f:82:43:5d does not exist for
VF 0
[685814.900928] ice 0000:88:00.0: MAC 33:33:00:00:00:01 does not exist for
VF 0
Reproduction:
1. Create one VF interface:
echo 1 > /sys/class/net/<interface_name>/device/sriov_numvfs
2. Run live dmesg on the host:
dmesg -wH
3. On SUT, script below steps into vf_namespace_assignment.sh
<#!/bin/sh> // Remove <>. Git removes # line
if=<VF name> (edit this per VF name)
loop=0
while true; do
echo test round $loop
let loop++
ip netns add ns$loop
ip link set dev $if up
ip link set dev $if netns ns$loop
ip netns exec ns$loop ip link set dev $if up
ip netns exec ns$loop ip link set dev $if netns 1
ip netns delete ns$loop
done
4. Run the script for at least 1000 iterations on SUT:
./vf_namespace_assignment.sh
Expected result:
No errors in dmesg.
Fixes: 129cf89e58 ("iavf: rename functions and structs to new name")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Ranganatha Rao <ranganatha.rao@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ntuple-filter feature on/off:
Default is on. If turned off, the filters will be removed from both
PF and iavf list. The removal is irrespective of current filter state.
Steps to reproduce:
-------------------
1. Ensure ntuple is on.
ethtool -K enp8s0 ntuple-filters on
2. Create a filter to receive the traffic into non-default rx-queue like 15
and ensure traffic is flowing into queue into 15.
Now, turn off ntuple. Traffic should not flow to configured queue 15.
It should flow to default RX queue.
Fixes: 0dbfbabb84 ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
New states introduced:
IAVF_FDIR_FLTR_DIS_REQUEST
IAVF_FDIR_FLTR_DIS_PENDING
IAVF_FDIR_FLTR_INACTIVE
Current FDIR state machines (SM) are not adequate to handle a few
scenarios in the link DOWN/UP event, reset event and ntuple-feature.
For example, when VF link goes DOWN and comes back UP administratively,
the expectation is that previously installed filters should also be
restored. But with current SM, filters are not restored.
So with new SM, during link DOWN filters are marked as INACTIVE in
the iavf list but removed from PF. After link UP, SM will transition
from INACTIVE to ADD_REQUEST to restore the filter.
Similarly, with VF reset, filters will be removed from the PF, but
marked as INACTIVE in the iavf list. Filters will be restored after
reset completion.
Steps to reproduce:
-------------------
1. Create a VF. Here VF is enp8s0.
2. Assign IP addresses to VF and link partner and ping continuously
from remote. Here remote IP is 1.1.1.1.
3. Check default RX Queue of traffic.
ethtool -S enp8s0 | grep -E "rx-[[:digit:]]+\.packets"
4. Add filter - change default RX Queue (to 15 here)
ethtool -U ens8s0 flow-type ip4 src-ip 1.1.1.1 action 15 loc 5
5. Ensure filter gets added and traffic is received on RX queue 15 now.
Link event testing:
-------------------
6. Bring VF link down and up. If traffic flows to configured queue 15,
test is success, otherwise it is a failure.
Reset event testing:
--------------------
7. Reset the VF. If traffic flows to configured queue 15, test is success,
otherwise it is a failure.
Fixes: 0dbfbabb84 ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for the pin-controller found on the gs101 SoC used in
Pixel 6 phones.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-10-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add emmc node properties for the eMMC device and add sdio0 node
properties for the microSD slot. Set the frequency for the sdhci
reference clock.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add emmc node properties for the eMMC device and add sdio0 node
properties for the microSD slot. Set the frequency for the sdhci
reference clock.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add node for the fixed reference clock used for emmc and sdio nodes.
Add emmc node for the 1st dwcmshc instance which is typically connected
to an eMMC device. Add sdio0 node for the 2nd dwcmshc instance which is
typically connected to microSD slot. Add sdio1 node for the 3rd dwcmshc
instance which is typically connected to an SDIO WiFi module. The node
names are based on Table 1-2 C910/C906 memory map in the TH1520 System
User Manual.
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZXhQgQAKCRDh3BK/laaZ
PHL9AQC0y7A+HLH6oXM8uI8rqC8e78qGdoGGl+Ppapae+BhO8gD+Or5B4yR0MZKR
Z/j0zMe57mmRMplxcwz/LXXCqeE9+w0=
=cn6g
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix a couple of potential crashes, one introduced in 6.6 and one
in 5.10
- Fix misbehavior of virtiofs submounts on memory pressure
- Clarify naming in the uAPI for a recent feature
* tag 'fuse-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: disable FOPEN_PARALLEL_DIRECT_WRITES with FUSE_DIRECT_IO_ALLOW_MMAP
fuse: dax: set fc->dax to NULL in fuse_dax_conn_free()
fuse: share lookup state between submount and its parent
docs/fuse-io: Document the usage of DIRECT_IO_ALLOW_MMAP
fuse: Rename DIRECT_IO_RELAX to DIRECT_IO_ALLOW_MMAP
Fix the following error while building for 32b:
In file included from ../drivers/gpu/drm/xe/xe_gt.c:6:
../drivers/gpu/drm/xe/xe_gt.c: In function ‘gt_ttm_mgr_init’:
../include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
Cast it to u64 so size of the second operand matches the first one when
building it for 32 bits.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Leave the types as u64, but cast the pointers to unsigned long before
assigning so the compiler doesn't throw warning about casting a pointer
to integer of different size.
Also, size_t should use %zu, not %ld.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
writeq() and readq() and other functions working on 64 bit variables
are not provided by 32b arch. For that it's needed to choose between
linux/io-64-nonatomic-hi-lo.h and linux/io-64-nonatomic-lo-hi.h,
spliting the read/write in 2 accesses. For xe driver, it doesn't matter
much, so just choose one and include in xe_mmio.h.
This also removes some ifdef CONFIG_64BIT we had around because of the
missing 64bit functions.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Either use the proper format or cast up to 64b depending on the case.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make sure it's 64bit value in both 32b and 64b arch.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As also cause issue on PVC, moving back
to what we did before stolen was
introduced
Signed-off-by: Philippe Lecluse <philippe.lecluse@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On DG2 we are now getting:
[ 104.456607] xe 0000:03:00.0: [drm] *ERROR* PCODE timeout, retrying with preemption disabled
Looks like we just need to invert the error check for
xe_pcode_try_request(), which returns zero on success.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On DG1, BAR2 is not reliable for reporting Vram size, need to use GSMBASE.
Simplify xe_mmio_total_vram_size to report vram size and usable size.
Signed-off-by: Philippe Lecluse <philippe.lecluse@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The bo_create ioctl relied on the internal ordering of memory regions to
be the same, make sure we don't allocate stolen instead of VRAM0.
Also remove a debug warning left in.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Philippe Lecluse <philippe.lecluse1@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
SRIOV has a use case of GuC MMIO send / recv, add a function for it.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Philippe Lecluse <philippe.lecluse1@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now aligns with the xe_guc_ct_send naming.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Philippe Lecluse <philippe.lecluse1@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting in 70.6.* GuC firmware the CSS header includes the submission
version, pull this from the CSS header. Prior 70.* versions accidentally
omitted this informatio so hard code to the correct values. This
information will be used by VFs when communicating with the PF.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Philippe Lecluse <philippe.lecluse1@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The blob doesn't fully support this yet, so fake for now to ensure our
driver load order is correct.
Once the blob supports pulling gt->info.engine_mask from the blob, this
patch can be removed.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This adds support for stolen memory, with the same allocator as
vram_mgr. This allows us to skip a whole lot of copy-paste,
by re-using parts of xe_ttm_vram_mgr.
The stolen memory may be bound using VM_BIND, so it performs like any
other memory region.
We should be able to map a stolen BO directly using the physical memory
location instead of through GGTT even on old platforms, but I don't know
what the effects are on coherency.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When a job is inflight we may access memory to read the hardware seqno.
All user jobs have VM open which has a ref but kernel jobs do not
require VM so it is possible to not have memory ref. To avoid this, take
a memory ref on kernel job creation.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Expand xe_mmio_wait32 to accept atomic and then use
that directly when possible, and create own routine to
wait for the pcode status.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Another clean-up towards killing the usage of i915_utils.h
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
We can run the bit operation locally without yet another macro.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
We don't need any macro for a simple check we can do explicitly
and clear.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
To make it simpler, all of the status checks also waits and
times out.
Also, no ktime precision is needed in this case, and we
can use usleep_range because we are not in atomic paths here.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Rather than a constant check on proto and wait not busy,
let's wait for the expected success and then check the
protocol afterwards.
With this, we can now use the regular xe_mmio_wait32
and kill this local need for the wait_for.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Possible now that the wait function returns the last read value.
So we can remove the users of i915's wait_for one by one...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
This is already useful because it avoids some extra reads
where registers might have changed after the timeout decision.
But also, it will be important to end the kill of i915's wait_for.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Then, move the i915_utils.h include to its user.
The overall goal is to kill all the usages of the i915_utils
stuff.
Yes, wait_for also depends on <linux/delay.h>, so they go
together to where it is needed. It will be likely needed
anyway directly for udelay or usleep_range.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
mas_split_final_node() always returns true and its return value is never
checked.
Change return type to void.
Link: https://lkml.kernel.org/r/20231109160821.16248-2-ppbuk5246@gmail.com
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Testing shows fast_isolate_freepages can blindly choose an unsuitable
pageblock from time to time particularly while the min mark is used from
XXX path:
if (!page) {
cc->fast_search_fail++;
if (scan_start) {
/*
* Use the highest PFN found above min. If one was
* not found, be pessimistic for direct compaction
* and use the min mark.
*/
if (highest >= min_pfn) {
page = pfn_to_page(highest);
cc->free_pfn = highest;
} else {
if (cc->direct_compaction && pfn_valid(min_pfn)) { /* XXX */
page = pageblock_pfn_to_page(min_pfn,
min(pageblock_end_pfn(min_pfn),
zone_end_pfn(cc->zone)),
cc->zone);
cc->free_pfn = min_pfn;
}
}
}
}
The reason is that no code is doing any check on the min_pfn
min_pfn = pageblock_start_pfn(cc->free_pfn - (distance >> 1));
In contrast, slow path of isolate_freepages() is always skipping
unsuitable pageblocks in a decent way.
This issue doesn't happen quite often. When running 25 machines with
16GiB memory for one night, most of them can hit this unexpected code
path. However the frequency isn't like many times per second. It might
be one time in a couple of hours. Thus, it is very hard to measure the
visible performance impact in my machines though the affection of choosing
the unsuitable migration_target should be negative in theory.
I feel it's still worth fixing this to at least make the code
theoretically self-explanatory as it is quite odd an unsuitable
migration_target can be still migration_target.
Link: https://lkml.kernel.org/r/20231206110054.61617-1-v-songbaohua@oppo.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reported-by: Zhanyuan Hu <huzhanyuan@oppo.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>