Add comment about intensity scale being poorly defined and
having no proper units.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231207134200.329174-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
MLX90635 is an Infra Red contactless temperature sensor most suitable
for consumer applications where measured object temperature is in range
between -20 to 100 degrees Celsius. It has improved accuracy for
measurements within temperature range of human body and can operate in
ambient temperature range between -20 to 85 degrees Celsius.
Driver provides simple power management possibility as it returns to
lowest possible power mode (Step sleep mode) in which temperature
measurements can still be performed, yet for continuous measuring it
switches to Continuous power mode where measurements constantly change
without triggering.
Signed-off-by: Crt Mori<cmo@melexis.com>
Link: https://lore.kernel.org/r/c6590e4fb8d993a5317b486a3e45e1bb6e9e3318.1701872051.git.cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge series from Nam Cao <namcao@linutronix.de>:
The driver was refactored in 9b2ef250b3 ("spi: spl022: switch to use
default spi_transfer_one_message()"), and some variables are now unused
because of that. Clean them up.
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
Hello,
this series converts all drivers below drivers/regulator to struct
platform_driver::remove_new(). See commit 5c5a7680e6 ("platform:
Provide a remove callback that returns no value") for an extended
explanation and the eventual goal.
All conversations are trivial, because all .remove() callbacks returned
zero unconditionally.
There are no interdependencies between these patches, so they could be
picked up individually. However I'd expect them to go in all together
via Mark's regulator tree.
Best regards
Uwe
Uwe Kleine-König (8):
regulator: arizona-ldo1: Convert to platform remove callback returning
void
regulator: bd9571mwv: Convert to platform remove callback returning
void
regulator: db8500-prcmu: Convert to platform remove callback returning
void
regulator: stm32-vrefbuf: Convert to platform remove callback
returning void
regulator: uniphier: Convert to platform remove callback returning
void
regulator: userspace-consumer: Convert to platform remove callback
returning void
regulator: virtual: Convert to platform remove callback returning void
regulator: wm8350: Convert to platform remove callback returning void
drivers/regulator/arizona-ldo1.c | 8 +++-----
drivers/regulator/bd9571mwv-regulator.c | 5 ++---
drivers/regulator/db8500-prcmu.c | 6 ++----
drivers/regulator/stm32-vrefbuf.c | 6 ++----
drivers/regulator/uniphier-regulator.c | 6 ++----
drivers/regulator/userspace-consumer.c | 6 ++----
drivers/regulator/virtual.c | 6 ++----
drivers/regulator/wm8350-regulator.c | 6 ++----
8 files changed, 17 insertions(+), 32 deletions(-)
base-commit: 0f5f12ac05f36f117e793656c3f560625e927f1b
--
2.42.0
DDI0601 2023-09 defines a new sysrem register FPMR (Floating Point Mode
Register) which configures the new FP8 features. Add a definition of this
register.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-12-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines new fields in HCRX_EL2 controlling access to new
system registers, update our definition of HCRX_EL2 to reflect this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-11-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines some new fields in SCTLR_EL1 controlling new MTE
and floating point features. Update our sysreg definition to reflect these.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-10-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines a new feature register ID_AA64FPFR0_EL1 which
enumerates a number of FP8 related features. Add a definition for it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-8-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 adds a new system register ID_AA64ISAR3_EL1 enumerating
new floating point and TLB invalidation features. Add a defintion for it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-7-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines some new fields in previously RES0 space in
ID_AA64ISAR2_EL1, together with one new enum value. Update the system
register definition to reflect this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-6-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines a new system register ID_AA64PFR2_EL1 which
enumerates FPMR and some new MTE features. Add a definition of this
register.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-5-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add E0POE bit that traps accesses to POR_EL0 from EL0.
Updated according to DDI0601 2023-03.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-4-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add POR_EL{0,1} according to DDI0601 2023-03.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-3-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The 2023-09 release of the architecture XML (DDI0601) adds a new field
ATS1E1A to HFGITR_EL2, update our definition of the register to match.
This was extracted from Faud Tabba's patch "KVM: arm64: Add latest
HFGITR_EL2 FGT entries to nested virt"
[Extracted the sysreg definition from Faud's original patch and reword
subject to match -- broonie]
Signed-off-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231206100503.564090-4-tabba@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-1-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Fix potential OOB in receive_encrypted_standard() if server returned a
large shdr->NextCommand that would end up writing off the end of
@next_buffer.
Fixes: b24df3e30c ("cifs: update receive_encrypted_standard to handle compounded responses")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't use all of this indirection which makes it really hard to follow
the code which is very basic. Error handling is also not really neede
here at all.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a way to query attributes of a single mount instead of having to parse
the complete /proc/$PID/mountinfo, which might be huge.
Lookup the mount the new 64bit mount ID. If a mount needs to be queried
based on path, then statx(2) can be used to first query the mount ID
belonging to the path.
Design is based on a suggestion by Linus:
"So I'd suggest something that is very much like "statfsat()", which gets
a buffer and a length, and returns an extended "struct statfs" *AND*
just a string description at the end."
The interface closely mimics that of statx.
Handle ASCII attributes by appending after the end of the structure (as per
above suggestion). Pointers to strings are stored in u64 members to make
the structure the same regardless of pointer size. Strings are nul
terminated.
Link: https://lore.kernel.org/all/CAHk-=wh5YifP7hzKSbwJj94+DZ2czjrZsczy6GBimiogZws=rg@mail.gmail.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231025140205.3586473-5-mszeredi@redhat.com
Reviewed-by: Ian Kent <raven@themaw.net>
[Christian Brauner <brauner@kernel.org>: various minor changes]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a lockdep assert to pci_disable_link_state_locked() which should only
be called with a pci_bus_sem read lock held.
Link: https://lore.kernel.org/r/20231128081512.19387-7-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include function name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Replace the current 'sem' parameter to the __pci_disable_link_state()
helper with a more descriptive 'locked' parameter, which indicates whether
a pci_bus_sem read lock is already held.
Link: https://lore.kernel.org/r/20231128081512.19387-6-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include function name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Break up the newly added ASPM comment so that it fits within the soft 80
character limit and becomes more readable.
Link: https://lore.kernel.org/r/20231128081512.19387-5-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The qcom_pcie_enable_aspm() helper is called from pci_walk_bus() during
host init to enable ASPM.
Since pci_walk_bus() already holds a pci_bus_sem read lock, use
pci_enable_link_state_locked() to enable link states in order to avoid a
potential deadlock (e.g. in case someone takes a write lock before
reacquiring the read lock).
This issue was reported by lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0-rc1 #4 Not tainted
--------------------------------------------
kworker/u16:6/147 is trying to acquire lock:
ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_enable_link_state+0x74/0x1e8
but task is already holding lock:
ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Fixes: 9f4f3dfad8 ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops")
Link: https://lore.kernel.org/r/20231128081512.19387-4-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: add "potential" in subject since the deadlock has only been
reported by lockdep, include helper name in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The vmd_pm_enable_quirk() helper is called from pci_walk_bus() during
probe to enable ASPM for controllers with VMD_FEAT_BIOS_PM_QUIRK set.
Since pci_walk_bus() already holds a pci_bus_sem read lock, use
pci_enable_link_state_locked() to enable link states in order to avoid a
potential deadlock (e.g. in case someone takes a write lock before
reacquiring the read lock).
Fixes: f492edb40b ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: add "potential" in subject since the deadlock has only been
reported by lockdep, include helper name in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Add pci_enable_link_state_locked() for enabling link states that can be
used in contexts where a pci_bus_sem read lock is already held (e.g. from
pci_walk_bus()).
This helper will be used to fix a couple of potential deadlocks where
the current helper is called with the lock already held, hence the CC
stable tag.
Fixes: f492edb40b ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include helper name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Mark reports that brightness is not restored after Xorg dpms screen blank.
This behavior was introduced by commit d9e865826c ("drm/amd/display:
Simplify brightness initialization") which dropped the cached backlight
value in display code, but also removed code for when the default value
read back was less than 1 nit.
Restore this code so that the backlight brightness is restored to the
correct default value in this circumstance.
Reported-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3031
Cc: stable@vger.kernel.org
Cc: Camille Cho <camille.cho@amd.com>
Cc: Krunoslav Kovac <krunoslav.kovac@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: d9e865826c ("drm/amd/display: Simplify brightness initialization")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We currently don't support dirty rectangles on hardware rotated modes.
So, if a user is using hardware rotated modes with PSR-SU enabled,
use PSR-SU FFU for all rotated planes (including cursor planes).
Cc: stable@vger.kernel.org
Fixes: 30ebe41582 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2952
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Bin Li <binli@gnome.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix pp_dpm_sclk_od and pp_dpm_mclk_od typos.
Those were defined as pp_*clk_od but used as pp_dpm_*clk_od instead.
This change removes the _dpm part.
Fixes: 8cfd6a0575 ("drm/amd/pm: Hide irrelevant pm device attributes")
Signed-off-by: Dmitrii Galantsev <dmitrii.galantsev@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Part of commit dab96d8b61 ("drm/amdgpu: fix buffer funcs setting order on suspend")
got dropped accidently. Add it back.
Fixes: dab96d8b61 ("drm/amdgpu: fix buffer funcs setting order on suspend")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whilst occasional current limiting is fine, constant current limiting
should be avoided. Add a back off system that will disable the
headphone amp, if a lot of current limiting is seen in a short window
of time.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Alas on some headsets the bias sense can cause problems with the
type detection. It can occasionally be falsely triggered by the type
detect itself and as the clamp is applied when this happens, it will
cause a headset to be incorrectly identified as headphones. As
such it should be disabled whilst running type detect. This does
mean a jack removal during type detect will cause a larger click
but that is unfortunately unavoidable.
Fixes: 1e4ce0d5c0 ("ASoC: cs42l43: Move headset bias sense enable earlier in process")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
River reports boot hangs with v6.6 and v6.7, and the bisect points to
commit
a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
which moves the memory allocation and kernel decompression from the
legacy decompressor (which executes *after* ExitBootServices()) to the
EFI stub, using boot services for allocating the memory. The memory
allocation succeeds but the subsequent call to decompress_kernel() never
returns, resulting in a failed boot and a hanging system.
As it turns out, this issue only occurs when physical address
randomization (KASLR) is enabled, and given that this is a feature we
can live without (virtual KASLR is much more important), let's disable
the physical part of KASLR when booting on AMI UEFI firmware claiming to
implement revision v2.0 of the specification (which was released in
2006), as this is the version these systems advertise.
Fixes: a1b87d54f4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218173
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
It's the ti_sn65dsi86.pwm auxiliary driver that creates the pwmchip, so
let the auxiliary device be the parent of the pwm device.
Note that getting a reference to the ti-sn65dsi86's pwm using pwm_get()
isn't affected by this change as ti_sn65dsi86_add_aux_device() sets the
auxiliary device's of_node to that of the main device.
Also change PM runtime tracking and diagnostic messages to use that one.
After enabling runtime PM operation for the auxiliary device, all works
as expected as parent devices are handled just fine.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # Acer Aspire 1
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231209153108.1988551-2-u.kleine-koenig@pengutronix.de
32 bytes may be not enough for some custom metadata. Relax the restriction,
allow metadata larger than 32 bytes and make __skb_metadata_differs() work
with bigger lengths.
Now size of metadata is only limited by the fact it is stored as u8 in
skb_shared_info, so maximum possible value is 255. Size still has to be
aligned to 4, so the actual upper limit becomes 252. Most driver
implementations will offer less, none can offer more.
Other important conditions, such as having enough space for xdp_frame
building, are already checked in bpf_xdp_adjust_meta().
Signed-off-by: Aleksander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/eb87653c-8ff8-447d-a7a1-25961f60518a@kernel.org
Link: https://lore.kernel.org/bpf/20231206205919.404415-3-larysa.zaremba@intel.com
Changed check expects passed data meta to be deemed invalid. After loosening
the requirement, the size of 36 bytes becomes valid. Therefore, increase
tested meta size to 256, so we do not get an unexpected success.
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231206205919.404415-2-larysa.zaremba@intel.com
Source and destination data buffers are allocated with GPF_KERNEL flag.
It means that, if the DDR is more than 2GB, buffers can be allocated above
the 32-bit addressable space. In this case, and if the dma controller is
only 32-bit compatible, swiotlb bounce buffer, located in the 32-bit
addressable space, is used and introduces a memcpy.
To prevent this extra memcpy, due to swiotlb bounce buffer use because
source or destination data buffer is allocated above the 32-bit addressable
space, force source and destination data buffers allocation with GPF_DMA
instead, when nobounce parameter is true.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20231124160235.2459326-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Allocate channel count consistently increases due to a missing source ID
(srcid) cleanup in the fsl_edma_free_chan_resources() function at imx93
eDMAv4.
Reset 'srcid' at fsl_edma_free_chan_resources().
Cc: stable@vger.kernel.org
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231127214325.2477247-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added custom channel-specific (temp1) attribute for resolution. The wait
time for a conversion in one-shot mode (enable = 0) depends on the
resolution.
When resolution is 12-bit, the conversion time is 140ms, but the minimum
update_interval is 125ms. Handled this problem by waiting an additional
15ms (125ms + 15ms = 140ms).
Added 'mask' parameter to the shutdown_write() function. Now it can
either write or update bits, depending on the value of mask. This is
needed, because for alarms a write is necessary, but for resolution only
the resolution bits should be updated.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-5-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When user writes a value to update_interval which does not match the
possible values, instead of returning invalid error, return the closest
value.
Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
Link: https://lore.kernel.org/r/20231031182158.124608-4-daniel.matyas@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>