Add the node for the ADSP found on the SC7280 SoC, using standard
Qualcomm firmware.
Remove the reserved-memory node from sc7280-chrome-common since CDSP is
currently not used there.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-9-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The wpss-pil driver wants to manage too many resources that cannot be
touched with standard Qualcomm firmware.
Use the compatible from the PAS driver and move the ChromeOS-specific
bits to sc7280-chrome-common.dtsi.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-7-6aa394d33edf@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The dtbs_check really doesn't like having memory without reg set.
The base address depends on the amount of RAM you have:
<= 2.00 GiB RAM: 0x80000000
= 3.00 GiB RAM: 0x40000000
= 3.75 GiB RAM: 0x10000000
(more does not fit into the 32-bit physical address space)
So, let's pick one of the values, 0x10000000 which is used on devices
with 3.75 GiB RAM. Since the bootloader will update it to what's present
on the device it doesn't matter too much.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-msm8953-misc-fixes-v2-1-df86655841d9@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some platforms don't use the built-in charging hardware (e.g. milletwifi).
As this is an optional peripheral, default it to off.
Keep it enabled for all other boards that use smbb.
Signed-off-by: Bryant Mairs <bryant@mai.rs>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231203-smbb-pm8941-pm8226-v1-1-9ad75909604b@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add UFS host controller and PHY nodes for sc7280 soc.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[luca: various cleanups and additions as written in the cover letter]
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231205-sc7280-ufs-v6-2-ad6ca7796de7@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Assuming crtc->state is pointing at the correct thing for the
async flip commit is nonsense. If we had already queued up multiple
commits this would point at the very lates crtc state even if the
older commits hadn't even happened yet.
Instead properly stage/arm the event like we do for async flips.
Since we don't need to arm multiple of these at the same time we
don't need a list like the normal vblank even processing uses.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230928152450.30109-1-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
When the chip is configured to timestamp all receive packets, the
timestamp in the RX completion is only valid if the metadata
present flag is not set for packets received on the wire. In
addition, internal loopback packets will never have a valid timestamp
and the timestamp field will always be zero. We must exclude
any 0 value in the timestamp field because there is no way to
determine if it is a loopback packet or not.
Add a new function bnxt_rx_ts_valid() to check for all timestamp
valid conditions.
Fixes: 66ed81dced ("bnxt_en: Enable packet timestamping for all RX packets")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The wait_event_interruptible_timeout() function returns 0
if the timeout elapsed, -ERESTARTSYS if it was interrupted
by a signal, and the remaining jiffies otherwise if the
condition evaluated to true before the timeout elapsed.
Driver should have checked for zero return value instead of
a positive value.
MChan: Print a warning for -ERESTARTSYS. The close operation
will proceed anyway when wait_event_interruptible_timeout()
returns for any reason. Since we do the close no matter what,
we should not return this error code to the caller. Change
bnxt_close_nic() to a void function and remove all error
handling from some of the callers.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Receive SKBs can go through the VF-rep path or the normal path.
skb_mark_for_recycle() is only called for the normal path. Fix it
to do it for both paths to fix possible stalled page pool shutdown
errors.
Fixes: 86b05508f7 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are issuing HWRM_FUNC_RESET cmd to reset the device including
all reserved resources, but not clearing the reservations
within the driver struct. As a result, when the driver re-initializes
as part of resume, it believes that there is no need to do any
resource reservation and goes ahead and tries to allocate rings
which will eventually fail beyond a certain number pre-reserved by
the firmware.
Fixes: 674f50a5b0 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My prior patch went a bit too far, because apparently fib6_has_expires()
could be true while f6i->gc_link is not hashed yet.
fib6_set_expires_locked() can indeed set RTF_EXPIRES
while f6i->fib6_table is NULL.
Original syzbot reports were about corruptions caused
by dangling f6i->gc_link.
Fixes: 5a08d0065a ("ipv6: add debug checks in fib6_info_release()")
Reported-by: syzbot+c15aa445274af8674f41@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231207201322.549000-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 939463016b ("tcp: change data receiver flowlabel after one dup")
we noticed an increase of TCPACKSkippedPAWS events.
Neal Cardwell tracked the issue to tcp_disordered_ack() assumption
about remote peer TS clock.
RFC 1323 & 7323 are suggesting the following:
"timestamp clock frequency in the range 1 ms to 1 sec per tick
between 1ms and 1sec."
This has to be adjusted for 1 MHz clock frequency.
This hints at reorders of SACK packets on send side,
this might deserve a future patch.
(skb->ooo_okay is always set for pure ACK packets)
Fixes: 614e8316aa ("tcp: add support for usec resolution in TCP TS values")
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Morley <morleyd@google.com>
Link: https://lore.kernel.org/r/20231207181342.525181-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before the change on `i686-linux` `systemd` build failed as:
$ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22)
After the change it fails as:
$ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
libbpf: ELF section #9 has inconsistent alignment addr=8 != d=4 in src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o
Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22)
Now it's slightly easier to figure out what is wrong with an ELF file.
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231208215100.435876-1-slyich@gmail.com
Yafang Shao says:
====================
In the current cgroup1 environment, associating operations between a cgroup
and applications in a BPF program requires storing a mapping of cgroup_id
to application either in a hash map or maintaining it in userspace.
However, by enabling bpf_cgrp_storage for cgroup1, it becomes possible to
conveniently store application-specific information in cgroup-local storage
and utilize it within BPF programs. Furthermore, enabling this feature for
cgroup1 involves minor modifications for the non-attach case, streamlining
the process.
However, when it comes to enabling this functionality for the cgroup1
attach case, it presents challenges. Therefore, the decision is to focus on
enabling it solely for the cgroup1 non-attach case at present. If
attempting to attach to a cgroup1 fd, the operation will simply fail with
the error code -EBADF.
Changes:
- RFC -> v1:
- Collect acked-by
- Avoid unnecessary is_cgroup1 check (Yonghong)
- Keep the code patterns consistent (Yonghong)
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This new helper allows us to obtain the fd of a net_cls cgroup, which will
be utilized in the subsequent patch.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231206115326.4295-3-laoar.shao@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In the current cgroup1 environment, associating operations between cgroups
and applications in a BPF program requires storing a mapping of cgroup_id
to application either in a hash map or maintaining it in userspace.
However, by enabling bpf_cgrp_storage for cgroup1, it becomes possible to
conveniently store application-specific information in cgroup-local storage
and utilize it within BPF programs. Furthermore, enabling this feature for
cgroup1 involves minor modifications for the non-attach case, streamlining
the process.
However, when it comes to enabling this functionality for the cgroup1
attach case, it presents challenges. Therefore, the decision is to focus on
enabling it solely for the cgroup1 non-attach case at present. If
attempting to attach to a cgroup1 fd, the operation will simply fail with
the error code -EBADF.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231206115326.4295-2-laoar.shao@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Because test_bad_ret main program is not written in assembly, we don't
control instruction indices in timer_cb_ret_bad() subprog. This bites us
in timer/test_bad_ret subtest, where we see difference between cpuv4 and
other flavors.
For now, make __msg() expectations not rely on instruction indices by
anchoring them around bpf_get_prandom_u32 call. Once we have regex/glob
support for __msg(), this can be expressed a bit more nicely, but for
now just mitigating the problem with available means.
Fixes: e02dea158d ("selftests/bpf: validate async callback return value check correctness")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231208233028.3412690-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Legacy ARC700 processors (first generation of MMU enabled ARC cores) had
VIPT cached which could be configured such that they could alias.
Corresponding support in kernel (with all the obnoxious cache flush overhead)
was added in ARC port 10 years ago to support 1 silicon. That is long bygone
and we can let it RIP.
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
And for ARcompact variant replace the PUSH/POP macros with gas provided
push/pop pseudo-instructions
This allows ISA specific implementation
e.g. Current ARCv2 PUSH/POP could be replaced with STD/LDL to save 2
registers at a time (w/o bothering with SP update each time) or
perhaps use ENTER_S/LEAVE_S to reduce code size
For ARCv3 ABI changed so callee regs are now r14-r26 (vs. r13-r25)
thus would need a different implementation.
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
This converts the remaining Wolfson ASoC codecs to
use GPIO descriptors.
These Wolfson codecs are mostly used with different
Samsung S3C (especially Cragganmore 6410) board files,
so the in-tree users are fixed up in the process.
I changed responsibilities some time ago, its time
to remove myself as maintainer of the SMC component.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20231207202358.53502-1-wenjia@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new 6.7-rc1 kernel now checks the checksum on CDAT data. While
using a branch of Fan's DCD qemu work (and specifying DCD devices), the
following splat was observed.
WARNING: CPU: 1 PID: 1384 at drivers/base/devres.c:1064 devm_kfree+0x4f/0x60
...
RIP: 0010:devm_kfree+0x4f/0x60
...
? devm_kfree+0x4f/0x60
read_cdat_data+0x1a0/0x2a0 [cxl_core]
cxl_port_probe+0xdf/0x200 [cxl_port]
...
The issue in qemu is still unknown but the spat is a straight forward
bug in the CDAT checksum processing code. Use a CDAT buffer variable to
ensure the devm_free() works correctly on error.
Fixes: 670e4e88f3 ("cxl: Add checksum verification to CDAT from CXL")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: http://lore.kernel.org/r/20231116-fix-cdat-devm-free-v1-1-b148b40707d7@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stefan Wahren says:
====================
qca_spi: collection of major fixes
This series contains a collection of major fixes for the qca_spi driver,
which has been recently discovered.
====================
Link: https://lore.kernel.org/r/20231206141222.52029-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of a reset triggered by the QCA7000 itself, the behavior of the
qca_spi driver was not quite correct:
- in case of a pending RX frame decoding the drop counter must be
incremented and decoding state machine reseted
- also the reset counter must always be incremented regardless of sync
state
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After calling ethtool -g it was not possible to adjust the TX ring
size again:
# ethtool -g eth1
Ring parameters for eth1:
Pre-set maximums:
RX: 4
RX Mini: n/a
RX Jumbo: n/a
TX: 10
Current hardware settings:
RX: 4
RX Mini: n/a
RX Jumbo: n/a
TX: 10
# ethtool -G eth1 tx 8
netlink error: Invalid argument
The reason for this is that the readonly setting rx_pending get
initialized and after that the range check in qcaspi_set_ringparam()
fails regardless of the provided parameter. So fix this by accepting
the exposed RX defaults. Instead of adding another magic number
better use a new define here.
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The qca_spi driver stop and restart the SPI kernel thread
(via ndo_stop & ndo_open) in case of TX ring changes. This is
a big issue because it allows userspace to prevent restart of
the SPI kernel thread (via signals). A subsequent change of
TX ring wrongly assume a valid spi_thread pointer which result
in a crash.
So prevent this by stopping the network traffic handling and
temporary park the SPI thread.
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My previous patch added a call to linkwatch_sync_dev(),
but that of course needs to be called under RTNL, which
I missed earlier, but now saw RCU warnings from.
Fix that by acquiring the RTNL in a similar fashion to
how other files do it here.
Fixes: facd15dfd6 ("net: core: synchronize link-watch when carrier is queried")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231206172122.859df6ba937f.I9c80608bcfbab171943ff4942b52dbd5e97fe06e@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialise various workqueue tasks and queue interrupt poll task
before the first invocation of any control net APIs. Since
octep_ctrl_net_get_info was called before the control net receive
work task was initialised or even the interrupt poll task was
queued, the function call wasn't returning actual firmware
info queried from Octeon.
Fixes: 8d6198a14e ("octeon_ep: support to fetch firmware info")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20231206135228.2591659-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull MD updates from Song:
"1. Fix/Cleanup RCU usage from conf->disks[i].rdev, by Yu Kuai;
2. Fix raid5 hang issue, by Junxiao Bi;
3. Add Yu Kuai as Reviewer of the md subsystem."
* tag 'md-next-20231208' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: synchronize flush io with array reconfiguration
MAINTAINERS: SOFTWARE RAID: Add Yu Kuai as Reviewer
md/md-multipath: remove rcu protection to access rdev from conf
md/raid5: remove rcu protection to access rdev from conf
md/raid1: remove rcu protection to access rdev from conf
md/raid10: remove rcu protection to access rdev from conf
md: remove flag RemoveSynchronized
Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"
md: bypass block throttle for superblock update
Add a separate documentation directory for TEE subsystem since it is a
standalone subsystem which already offers devices consumed by multiple
different subsystem drivers.
Split overall TEE subsystem documentation modularly where:
- The userspace API has been moved to Documentation/userspace-api/tee.rst.
- The driver API has been moved to Documentation/driver-api/tee.rst.
- The first module covers the overview of TEE subsystem.
- The further modules are dedicated to different TEE implementations like:
- OP-TEE
- AMD-TEE
- and so on for future TEE implementation support.
Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231128072352.866859-1-sumit.garg@linaro.org
Adding a parameter is not particularly useful here, and it is definitely
not done elsewhere. It also prevents the generation of a hyperlink to the
kernel-doc documentation. Removing the parameter to enable hyperlinks and
make the style coherent.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231201-nvmem-docs-kerneldoc-v1-2-3e8f2b706ce6@bootlin.com
Fix function parameters to prevent kernel-doc warnings.
vboxsf_wrappers.c:132: warning: Function parameter or member 'create_parms' not described in 'vboxsf_create'
vboxsf_wrappers.c:132: warning: Excess function parameter 'param' description in 'vboxsf_create'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231206025355.31814-1-rdunlap@infradead.org
Andrei Matei says:
====================
bpf: fix accesses to uninit stack slots
Fix two related issues issues around verifying stack accesses:
1. accesses to uninitialized stack memory was allowed inconsistently
2. the maximum stack depth needed for a program was not always
maintained correctly
The two issues are fixed together in one commit because the code for one
affects the other.
V4 to V5:
- target bpf-next (Alexei)
V3 to V4:
- minor fixup to comment in patch 1 (Eduard)
- C89-style in patch 3 (Andrii)
V2 to V3:
- address review comments from Andrii and Eduard
- drop new verifier tests in favor of editing existing tests to check
for stack depth
- append a patch with a bit of cleanup coming out of the previous review
====================
Link: https://lore.kernel.org/r/20231208032519.260451-1-andreimatei1@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>