There used to be a dependency on _PAGE_PRIVILEGED with pte_savedwrite.
But that got dropped by
commit 6a56ccbcf6 ("mm/autonuma: use can_change_(pte|pmd)_writable() to replace savedwrite")
With the change in this patch numa fault pte (pte_protnone()) gets mapped as regular user pte
with RWX cleared (no-access) whereas earlier it used to be mapped _PAGE_PRIVILEGED.
Hash fault handling code gets some WARN_ON added in this patch because
those functions are not expected to get called with _PAGE_READ cleared.
commit 18061c17c8 ("powerpc/mm: Update PROTFAULT handling in the page
fault path") explains the details.
Signed-off-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231204093638.71503-1-aneesh.kumar@kernel.org
In the nestedv2 case, if there is a pending decrementer exception, the
L1 must get the L2's timebase from the L0 to see if the exception should
be cancelled. This adds the overhead of a H_GUEST_GET_STATE call to the
likely case in which the decrementer should not be cancelled.
Avoid this logic for the nestedv2 case.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-13-vaibhav@linux.ibm.com
Commit 7092360399 ("KVM: PPC: Reimplement non-SIMD LOAD/STORE
instruction mmio emulation with analyse_instr() input") and
commit 2b33cb585f ("KVM: PPC: Reimplement LOAD_FP/STORE_FP instruction
mmio emulation with analyse_instr() input") made
kvmppc_emulate_loadstore() use the results from analyse_instr() for
instruction emulation. In particular the effective address from
analyse_instr() is used for UPDATE type instructions and fact that
op.val is all ready endian corrected is used in the STORE case.
However, these changes now have some negative implications for the
nestedv2 case. For analyse_instr() to determine the correct effective
address, the GPRs must be loaded from the L0. This is not needed as
vcpu->arch.vaddr_accessed is already set. Change back to using
vcpu->arch.vaddr_accessed.
In the STORE case, use kvmppc_get_gpr() value instead of the op.val.
kvmppc_get_gpr() will reload from the L0 if needed in the nestedv2 case.
This means if a byte reversal is needed must now be passed to
kvmppc_handle_store() like in the kvmppc_handle_load() case.
This means the call to kvmhv_nestedv2_reload_ptregs() can be avoided as
there is no concern about op.val being stale. Drop the call to
kvmhv_nestedv2_mark_dirty_ptregs() as without the call to
kvmhv_nestedv2_reload_ptregs(), stale state could be marked as valid.
This is fine as the required marking things dirty is already handled for
the UPDATE case by the call to kvmppc_set_gpr(). For LOADs, it is
handled in kvmppc_complete_mmio_load(). This is called either directly
in __kvmppc_handle_load() if the load can be handled in KVM, or on the
next kvm_arch_vcpu_ioctl_run() if an exit was required.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-12-vaibhav@linux.ibm.com
In the nestedv2 case, the L1 may register the L2's VPA with the L0. This
allows the L0 to manage the L2's dispatch count, as well as enable
possible performance optimisations by seeing if certain resources are
not being used by the L2 (such as the PMCs).
Use the H_GUEST_SET_STATE call to inform the L0 of the L2's VPA
address. This can not be done in the H_GUEST_VCPU_RUN input buffer.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-11-vaibhav@linux.ibm.com
H_COPY_TOFROM_GUEST is part of the nestedv1 API and so should not be
called by a nestedv2 host. Do not attempt to call it.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-10-vaibhav@linux.ibm.com
The msr check in kvmppc_handle_exit_hv() is not needed for nestedv2 hosts,
skip the check to avoid a H_GUEST_GET_STATE hcall.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-9-vaibhav@linux.ibm.com
There is no need to inject an external interrupt in
kvmppc_book3s_irqprio_deliver() as the test for BOOK3S_IRQPRIO_EXTERNAL
in kvmhv_run_single_vcpu() before guest entry will raise LPCR_MER if
needed. There is also no need to inject the decrementer interrupt as
this will be raised within the L2 if needed. Avoiding these injections
reduces H_GUEST_GET_STATE hcalls by the L1.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-8-vaibhav@linux.ibm.com
Commit 026728dc5d ("KVM: PPC: Book3S HV P9: Inject pending xive
interrupts at guest entry") changed guest entry so that if external
interrupts are enabled, BOOK3S_IRQPRIO_EXTERNAL is not tested for. Test
for this regardless of MSR_EE.
For an L1 host, do not inject an interrupt, but always
use LPCR_MER. If the L0 desires it can inject an interrupt.
Fixes: 026728dc5d ("KVM: PPC: Book3S HV P9: Inject pending xive interrupts at guest entry")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[jpn: use kvmpcc_get_msr(), write commit message]
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-7-vaibhav@linux.ibm.com
LPCR_MER is conditionally set during entry to a guest if there is a
pending external interrupt. In the nestedv2 case, this change is not
being communicated to the L0, which means it is not being set in the L2.
Ensure the updated LPCR value is passed to the L0.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-6-vaibhav@linux.ibm.com
kvmhv_copy_tofrom_guest_radix() gets the PID at the start of the
function. If pid is not used, then this is a wasteful H_GUEST_GET_STATE
hcall for nestedv2 hosts. Move the assignment to where pid will be used.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-5-vaibhav@linux.ibm.com
The check for a hcall coming from userspace is done for KVM-PR. This is
not supported for nestedv2 and the L0 will directly inject the necessary
exception to the L2 if userspace performs a hcall. Avoid checking the
MSR and thus avoid a H_GUEST_GET_STATE hcall in the L1.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-4-vaibhav@linux.ibm.com
The kvmppc_get_tb_offset() getter reloads KVMPPC_GSID_TB_OFFSET from the
L0 for nestedv2 host. This is unnecessary as the value does not change.
KVMPPC_GSID_TB_OFFSET also need not be reloaded in
kvmppc_{s,g}et_dec_expires().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-3-vaibhav@linux.ibm.com
An L0 must invalidate the L2's RPT during H_GUEST_DELETE if this has not
already been done. This is a slow operation that means H_GUEST_DELETE
must return H_BUSY multiple times before completing. Invalidating the
tables before deleting the guest so there is less work for the L0 to do.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231201132618.555031-2-vaibhav@linux.ibm.com
Modify acp config flag read logic from ACP v7.0 onwards.
Instead of reading from DMI table match entry, read the
config flag value from BIOS ACPI table.
This will remove updating DMI table when new platform support
is added.
Use FLAG_AMD_LEGACY_ONLY_DMIC flag as default one.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20231207045505.1519151-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the ksz_chip_id enums moved to the platform include file for ksz
switches, platform code that instantiates a device can now use these to
set ksz_platform_data::chip_id.
Signed-off-by: Daniel Danzberger <dd@embedd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ksz driver has bits and pieces of platform_data probing support, but
it doesn't work.
The conventional thing to do is to have an encapsulating structure for
struct dsa_chip_data that gets put into dev->platform_data. This driver
expects a struct ksz_platform_data, but that doesn't contain a struct
dsa_chip_data as first element, which will obviously not work with
dsa_switch_probe() -> dsa_switch_parse().
Pointing dev->platform_data to a struct dsa_chip_data directly is in
principle possible, but that doesn't work either. The driver has
ksz_switch_detect() to read the device ID from hardware, followed by
ksz_check_device_id() to compare it against a predetermined expected
value. This protects against early errors in the SPI/I2C communication.
With platform_data, the mechanism in ksz_check_device_id() doesn't work
and even leads to NULL pointer dereferences, since of_device_get_match_data()
doesn't work in that probe path.
So obviously, the platform_data support is actually missing, and the
existing handling of struct ksz_platform_data is bogus. Complete the
support by adding a struct dsa_chip_data as first element, and fixing up
ksz_check_device_id() to pick up the platform_data instead of the
unavailable of_device_get_match_data().
The early dev->chip_id assignment from ksz_switch_register() is also
bogus, because ksz_switch_detect() sets it to an initial value. So
remove it.
Also, ksz_platform_data :: enabled_ports isn't used anywhere, delete it.
Link: https://lore.kernel.org/netdev/20231204154315.3906267-1-dd@embedd.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Danzberger <dd@embedd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we have a single function slab_free() handling both single
object freeing and bulk freeing with necessary hooks, the latter case
requiring slab_free_freelist_hook(). It should be however better to
distinguish the two use cases for the following reasons:
- code simpler to follow for the single object case
- better code generation - although inlining should eliminate the
slab_free_freelist_hook() for single object freeing in case no
debugging options are enabled, it seems it's not perfect. When e.g.
KASAN is enabled, we're imposing additional unnecessary overhead for
single object freeing.
- preparation to add percpu array caches in near future
Therefore, simplify slab_free() for the single object case by dropping
unnecessary parameters and calling only slab_free_hook() instead of
slab_free_freelist_hook(). Rename the bulk variant to slab_free_bulk()
and adjust callers accordingly.
While at it, flip (and document) slab_free_hook() return value so that
it returns true when the freeing can proceed, which matches the logic of
slab_free_freelist_hook() and is not confusingly the opposite.
Additionally we can simplify a bit by changing the tail parameter of
do_slab_free() when freeing a single object - instead of NULL we can set
it equal to head.
bloat-o-meter shows small code reduction with a .config that has KASAN
etc disabled:
add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-118 (-118)
Function old new delta
kmem_cache_alloc_bulk 1203 1196 -7
kmem_cache_free 861 835 -26
__kmem_cache_free 741 704 -37
kmem_cache_free_bulk 911 863 -48
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Currently, when __kmem_cache_alloc_bulk() fails, it frees back the
objects that were allocated before the failure, using
kmem_cache_free_bulk(). Because kmem_cache_free_bulk() calls the free
hooks (KASAN etc.) and those expect objects that were processed by the
post alloc hooks, slab_post_alloc_hook() is called before
kmem_cache_free_bulk().
This is wasteful, although not a big concern in practice for the rare
error path. But in order to efficiently handle percpu array batch refill
and free in the near future, we will also need a variant of
kmem_cache_free_bulk() that avoids the free hooks. So introduce it now
and use it for the failure path.
In case of failure we however still need to perform memcg uncharge so
handle that in a new memcg_slab_alloc_error_hook(). Thanks to Chengming
Zhou for noticing the missing uncharge.
As a consequence, __kmem_cache_alloc_bulk() no longer needs the objcg
parameter, remove it.
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The SLUB sysfs stats enabled CONFIG_SLUB_STATS have two deficiencies
identified wrt bulk alloc/free operations:
- Bulk allocations from cpu freelist are not counted. Add the
ALLOC_FASTPATH counter there.
- Bulk fastpath freeing will count a list of multiple objects with a
single FREE_FASTPATH inc. Add a stat_add() variant to count them all.
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Commit 503579448d ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
made the GSC0 engine not have a valid uabi class and so broke the engine
reset counting, which in turn was made class based in cb823ed991 ("drm/i915/gt: Use intel_gt as the primary object for handling resets").
Despite the title and commit text of the latter is not mentioning it (and
has left the storage array incorrectly sized), tracking by class, despite
it adding aliasing in hypthotetical multi-tile systems, is handy for
virtual engines which for instance do not have a valid engine->id.
Therefore we keep that but just change it to use the internal class which
is always valid. We also add a helper to increment the count, which
aligns with the existing getter.
What was broken without this fix were out of bounds reads every time a
reset would happen on the GSC0 engine, or during selftests when storing
and cross-checking the counts in igt_live_test_begin and
igt_live_test_end.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: dfed6b58d5 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class")
[tursulin: fixed Fixes tag]
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com
Engine->id namespace is per-tile so struct igt_live_test->reset_engine[]
needs to be two-dimensional so engine reset counts from all tiles can be
stored with no aliasing. With aliasing, if we had a real multi-tile
platform, the reset counts would be incorrect for same engine instance on
different tiles.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 0c29efa23f ("drm/i915/selftests: Consider multi-gt instead of to_gt()")
Reported-by: Alan Previn Teres Alexis <alan.previn.teres.alexis@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-1-tvrtko.ursulin@linux.intel.com
encoder->funcs entry might be NULL, so check it first before calling its
methods. This fixes NULL pointer dereference observed on Rasberry Pi
3b/4b boards.
Fixes: caf525ed45 ("drm/encoder: register per-encoder debugfs dir")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205130631.3456986-1-m.szyprowski@samsung.com
CONFIG_DRM_AUX_HPD_BRIDGE depends on CONFIG_OF but that dependency is
not included when CONFIG_TYPEC_QCOM_PMIC selects it, resulting in a
Kconfig warning when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && OF [=n]
Selected by [m]:
- TYPEC_QCOM_PMIC [=m] && USB_SUPPORT [=y] && TYPEC [=m] && TYPEC_TCPM [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && (DRM [=m] || DRM [=m]=n) && DRM_BRIDGE [=y]
Only select CONFIG_DRM_AUX_HPD_BRIDGE with both CONFIG_DRM_BRIDGE and
CONFIG_OF to clear up the warning.
Fixes: 7d9f1b72b2 ("usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205-drm_aux_bridge-fixes-v1-2-d242a0ae9df4@kernel.org
CONFIG_DRM_AUX_BRIDGE depends on CONFIG_OF but that dependency is not
included when CONFIG_TYPEC_MUX_NB7VPQ904M selects it, resulting in a
Kconfig warning when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_AUX_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && OF [=n]
Selected by [y]:
- TYPEC_MUX_NB7VPQ904M [=y] && USB_SUPPORT [=y] && TYPEC [=y] && I2C [=y] && (DRM [=y] || DRM [=y]=n) && DRM_BRIDGE [=y]
Only select CONFIG_DRM_AUX_BRIDGE with both CONFIG_DRM_BRIDGE and
CONFIG_OF to clear up the warning.
Fixes: c5d296bad6 ("usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205-drm_aux_bridge-fixes-v1-1-d242a0ae9df4@kernel.org
Ante Knezic says:
====================
net: dsa: microchip: enable setting rmii reference
KSZ88X3 devices can select between internal and external RMII reference clock.
This patch series introduces new device tree property for setting reference
clock to internal.
---
V5:
- move rmii-clk-internal to be a port device tree property.
V4:
- remove rmii_clk_internal from ksz_device, as its not needed any more
- move rmii clk config as well as ksz8795_cpu_interface_select to
ksz8_config_cpu_port
V3:
- move ksz_cfg from global switch config to port config as suggested by Vladimir
Oltean
- reverse patch order as suggested by Vladimir Oltean
- adapt dt schema as suggested by Conor Dooley
V2:
- don't rely on default register settings - enforce set/clear property as
suggested by Andrew Lunn
- enforce dt schema as suggested by Conor Dooley
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Microchip KSZ8863/KSZ8873 have the ability to select between internal
and external RMII reference clock. By default, reference clock
needs to be provided via REFCLKI_3 pin. If required, device can be
setup to provide RMII clock internally so that REFCLKI_3 pin can be
left unconnected.
Add a new "microchip,rmii-clk-internal" property which will set
RMII clock reference to internal. If property is not set, reference
clock needs to be provided externally.
While at it, move the ksz8795_cpu_interface_select() to
ksz8_config_cpu_port() to get a cleaner call path for cpu port.
Signed-off-by: Ante Knezic <ante.knezic@helmholz.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation for selecting reference rmii clock on KSZ88X3 devices
Signed-off-by: Ante Knezic <ante.knezic@helmholz.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The neighbour event callback call the function nfp_tun_write_neigh,
this function will take a mutex lock and it is in soft irq context,
change the work queue to process the neighbour event.
Move the nfp_tun_write_neigh function out of range rcu_read_lock/unlock()
in function nfp_tunnel_request_route_v4 and nfp_tunnel_request_route_v6.
Fixes: abc210952a ("nfp: flower: tunnel neigh support bond offload")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang-struct [1] found that ee_antenna in struct ath5k_eeprom_info is
unused. The commit 1048643ea9 ("ath5k: Clean up eeprom
parsing and add missing calibration data") added it, but did not use it
in any way. Neither, there is a later user.
So remove that unused member.
[1] https://github.com/jirislaby/clang-struct
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231205111515.21470-1-jirislaby@kernel.org
Broadcast action frames are needed for the Device Provisioning
Protocol (DPP) for Presence and PKEX Exchange requests. Currently
just ath9k has this capability so this is being enabled for
ath10k (for at least one hardware variant).
Add a new capability flag in ath10k_hw_params to indicate support
for receiving multicast action frames. This bit is then checked
when configuring the RX filter and (if set) multicast action frame
registration is enabled.
Until more hardware can be tested only the "qca6174 hw3.2" variant
is enabling this feature.
Note: I went ahead and removed the 'changed_flags' mask operation
since it had no effect, that parameter was not being used anywhere.
Tested-on: QCA6174 hw3.2 WLAN.RM.4.4.1-00288-
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231116173246.40458-1-prestwoj@gmail.com
The uncore code may not always be available (e.g. when we build the
display code with Xe), so we can't always rely on having the uncore's
spinlock.
To handle this, split the spin_lock/unlock_irqsave/restore() into
spin_lock/unlock() followed by a call to local_irq_save/restore() and
create wrapper functions for locking and unlocking the uncore's
spinlock. In these functions, we have a condition check and only
actually try to lock/unlock the spinlock when I915 is defined, and
thus uncore is available.
This keeps the ifdefs contained in these new functions and all such
logic inside the display code.
Cc: Tvrtko Ursulin <tvrto.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201100032.1367589-1-luciano.coelho@intel.com
The pin control header provides struct pingroup and PINCTRL_PINGROUP() macro.
Utilize them instead of open coded variants in the driver.
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231204160033.1872569-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's unclear why it's not a const unsigned int pointer from day 1.
Make the pins member const unsigned int pointer in struct group_desc.
Update necessary APIs.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231204160033.1872569-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We are not going to change pins in the ->set_mux() callback. Mark
the local variable with a const qualifier. While at it, make it
also unsigned.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231204160033.1872569-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move xfs_ondisk.h to libxfs so that we can do the struct sanity checks
in userspace libxfs as well. This should allow us to retire the
somewhat fragile xfs/122 test on xfstests.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use the compiler-provided static_assert built-in from C11 instead of
the kernel-specific BUILD_BUG_ON_MSG for the structure size and offset
checks in xfs_ondisk. This not only gives slightly nicer error messages
in case things go south, but can also be trivially used as-is in
userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This patch does not modify logic.
xfs_da_buf_copy() will copy one block from src xfs_buf to
dst xfs_buf, and update the block metadata in dst directly.
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_da3_swap_lastblock() copy the last block content to the dead block,
but do not update the metadata in it. We need update some metadata
for some kinds of type block, such as dir3 leafn block records its
blkno, we shall update it to the dead block blkno. Otherwise,
before write the xfs_buf to disk, the verify_write() will fail in
blk_hdr->blkno != xfs_buf->b_bn, then xfs will be shutdown.
We will get this warning:
XFS (dm-0): Metadata corruption detected at xfs_dir3_leaf_verify+0xa8/0xe0 [xfs], xfs_dir3_leafn block 0x178
XFS (dm-0): Unmount and run xfs_repair
XFS (dm-0): First 128 bytes of corrupted metadata buffer:
00000000e80f1917: 00 80 00 0b 00 80 00 07 3d ff 00 00 00 00 00 00 ........=.......
000000009604c005: 00 00 00 00 00 00 01 a0 00 00 00 00 00 00 00 00 ................
000000006b6fb2bf: e4 44 e3 97 b5 64 44 41 8b 84 60 0e 50 43 d9 bf .D...dDA..`.PC..
00000000678978a2: 00 00 00 00 00 00 00 83 01 73 00 93 00 00 00 00 .........s......
00000000b28b247c: 99 29 1d 38 00 00 00 00 99 29 1d 40 00 00 00 00 .).8.....).@....
000000002b2a662c: 99 29 1d 48 00 00 00 00 99 49 11 00 00 00 00 00 .).H.....I......
00000000ea2ffbb8: 99 49 11 08 00 00 45 25 99 49 11 10 00 00 48 fe .I....E%.I....H.
0000000069e86440: 99 49 11 18 00 00 4c 6b 99 49 11 20 00 00 4d 97 .I....Lk.I. ..M.
XFS (dm-0): xfs_do_force_shutdown(0x8) called from line 1423 of file fs/xfs/xfs_buf.c. Return address = 00000000c0ff63c1
XFS (dm-0): Corruption of in-memory data detected. Shutting down filesystem
XFS (dm-0): Please umount the filesystem and rectify the problem(s)
>From the log above, we know xfs_buf->b_no is 0x178, but the block's hdr record
its blkno is 0x1a0.
Fixes: 24df33b45e ("xfs: add CRC checking to dir2 leaf blocks")
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In the case of returning -ENOSPC, ensure logflagsp is initialized by 0.
Otherwise the caller __xfs_bunmapi will set uninitialized illegal
tmp_logflags value into xfs log, which might cause unpredictable error
in the log recovery procedure.
Also, remove the flags variable and set the *logflagsp directly, so that
the code should be more robust in the long run.
Fixes: 1b24b633aa ("xfs: move some more code into xfs_bmap_del_extent_real")
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use struct types instead of typedefs so that the header can be included
with pulling in the headers that define the typedefs, and remove the
pointless externs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_reserve_blocks has a very odd interface that can only be explained
by it directly deriving from the IRIX fcntl handler back in the day.
Split reporting out the reserved blocks out of xfs_reserve_blocks into
the only caller that cares. This means that the value reported from
XFS_IOC_SET_RESBLKS isn't atomically sampled in the same critical
section as when it was set anymore, but as the values could change
right after setting them anyway that does not matter. It does
provide atomic sampling of both values for XFS_IOC_GET_RESBLKS now,
though.
Also pass a normal scalar integer value for the requested value instead
of the pointless pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>