Commit graph

1,294,499 commits

Author SHA1 Message Date
Fabio Estevam
e3873abfe0 arm64: dts: imx8mm-venice-gw7: Adjust PCI Ethernet nodes
As per Rob Herring's feedback:

"The ethernet device should have a node name of
'ethernet'. The 'pcie' node name and 'device_type = "pci"' is for PCI
buses/bridges only."

Do it as suggested.

Fixes: d61c5068729a ("arm64: dts: imx8mm-venice-gw7: Fix pci sub-nodes")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06 11:11:37 +08:00
Joao Paulo Goncalves
63ff54dfa8 dt-bindings: arm: fsl: add verdin imx8mp mallow board
Add Mallow carrier board for wifi and nonwifi variants of Toradex Verdin
IMX8MP SoM. Mallow is a low-cost carrier board in the Verdin family with
a small form factor and build for volume production making it ideal for
industrial and embedded applications.

https://www.toradex.com/products/carrier-board/mallow-carrier-board

Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06 11:11:00 +08:00
Joao Paulo Goncalves
ffce67b611 dt-bindings: arm: fsl: add verdin imx8mm mallow board
Add Mallow carrier board for wifi and nonwifi variants of Toradex Verdin
IMX8MM SoM. Mallow is a low-cost carrier board in the Verdin family with
a small form factor and build for volume production making it ideal for
industrial and embedded applications.

https://www.toradex.com/products/carrier-board/mallow-carrier-board

Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06 11:10:52 +08:00
Martin K. Petersen
e78e59acfb Merge patch series "scsi: Convert to platform remove callback returning" void
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> says:

Hello,

this series converts all drivers below drivers/scsi to struct
platform_driver::remove_new(). See commit 5c5a7680e6 ("platform:
Provide a remove callback that returns no value") for an extended
explanation and the eventual goal.

All conversations are trivial, because all .remove() callbacks returned
zero unconditionally.

Best regards
Uwe

Link: https://lore.kernel.org/r/cover.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:54:06 -05:00
Uwe Kleine-König
6ff482eeeb scsi: sun_esp: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1d385231c23c2a1e6e7dc1968eb111327386d1f6.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:38 -05:00
Uwe Kleine-König
e84bd0bb30 scsi: sun3x_esp: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/5010d1a4f3d77eaa1114fa254c343c4f23313901.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
15b016b2d0 scsi: sun3: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/84239a68fe06143d1d6fed6c9aaae6a4680ead71.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
357a7fd243 scsi: sni_53c710: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/2f4b7366ca00a107a9595514795e909e632980da.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
358987af1b scsi: sgiwd93: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/92114604fd1274073915e515cae15003ff07aa4a.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
e26eec9a4d scsi: qlogicpti: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/8242c07f617fc946aab857c9357f540598fe964e.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
f0baf76a22 scsi: mvme16x: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1d16e93a498831abd64df8b8cf54fd8872cdd1cd.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
69b43bf38b scsi: mac: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/89ce161dad52d99df07135531512ccecb7f25d14.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
0b649224f7 scsi: mac_esp: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/9013c84059b8ccd6a5c8305aa35cfdfa314ba74c.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
c71ef3d1fb scsi: jazz_esp: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/f71efbe17973c97fd2a1e78f8d7fcf456644510b.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:37 -05:00
Uwe Kleine-König
51a41ec6d3 scsi: bvme6000: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/63294479a4e745210c078859afa88904fa0b3be8.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:36 -05:00
Uwe Kleine-König
3becb4cdf1 scsi: atari: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/27a2b133b1b88a9baf51353c511e93a5027f9602.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:36 -05:00
Uwe Kleine-König
688bbe398c scsi: a4000t: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/c15ffc57efebc5da3f7e6dd558d69181e129cafe.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:36 -05:00
Uwe Kleine-König
5854cdd041 scsi: a3000: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/811d180950b76c2d95cd080e3c251757ca011380.1701619134.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:51:36 -05:00
Martin K. Petersen
e84d34372e Merge branch '6.8/s/mpi3mr2' into 6.8/scsi-staging
Two driver updates from Chandrakanth patil at Broadcom:

  scsi: mpi3mr: Update driver version to 8.5.1.0.0
  scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-3
  scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-2
  scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-1
  scsi: mpi3mr: Fetch correct device dev handle for status reply descriptor
  scsi: mpi3mr: Block PEL Enable Command on Controller Reset and Unrecoverable State
  scsi: mpi3mr: Clean up block devices post controller reset
  scsi: mpi3mr: Refresh sdev queue depth after controller reset

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:46:32 -05:00
Chandrakanth patil
d0a60e3eda scsi: mpi3mr: Update driver version to 8.5.1.0.0
Update driver version to 8.5.1.0.0

Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231205191630.12201-5-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:45:53 -05:00
Chandrakanth patil
9536af615d scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-3
The driver acquires the required NVMe SGLs from the pre-allocated
pool.

Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231205191630.12201-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:45:53 -05:00
Chandrakanth patil
fb231d7def scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-2
The driver acquires the required SGLs from the pre-allocated pool.

Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231205191630.12201-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:45:53 -05:00
Chandrakanth patil
c432e16752 scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-1
The driver now supports SGLs for BSG data transfer. Upon loading, the
driver pre-allocates SGLs in chunks of 8k, results in a total of 256 * 8k,
equal to 2MB. These pre-allocated SGLs are reserved for handling BSG
commands and are deallocated during driver unload.

Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231205191630.12201-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:45:53 -05:00
Namjae Jeon
eb547407f3 ksmbd: downgrade RWH lease caching state to RH for directory
RWH(Read + Write + Handle) caching state is not supported for directory.
ksmbd downgrade it to RH for directory if client send RWH caching lease
state.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-05 20:43:23 -06:00
Namjae Jeon
18dd1c367c ksmbd: set v2 lease capability
Set SMB2_GLOBAL_CAP_DIRECTORY_LEASING to ->capabilities to inform server
support directory lease to client.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-05 20:43:23 -06:00
Namjae Jeon
d045850b62 ksmbd: set epoch in create context v2 lease
To support v2 lease(directory lease), ksmbd set epoch in create context
v2 lease response.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-05 20:43:23 -06:00
Zizhi Wo
8f17527230 ksmbd: fix memory leak in smb2_lock()
In smb2_lock(), if setup_async_work() executes successfully,
work->cancel_argv will bind the argv that generated by kmalloc(). And
release_async_work() is called in ksmbd_conn_try_dequeue_request() or
smb2_lock() to release argv.
However, when setup_async_work function fails, work->cancel_argv has not
been bound to the argv, resulting in the previously allocated argv not
being released. Call kfree() to fix it.

Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-05 20:43:23 -06:00
Chandrakanth patil
07ac6adda4 scsi: mpi3mr: Fetch correct device dev handle for status reply descriptor
The current dev handle for the status reply is 0xFFFF, which is invalid.
So fetch the correct value.

Co-developed-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231126053134.10133-5-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:38:48 -05:00
Chandrakanth patil
f8fb3f3914 scsi: mpi3mr: Block PEL Enable Command on Controller Reset and Unrecoverable State
If a controller reset is underway or the controller is in an unrecoverable
state, the PEL enable management command will be returned as EAGAIN or
EFAULT.

Cc: <stable@vger.kernel.org> # v6.1+
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231126053134.10133-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:38:48 -05:00
Chandrakanth patil
c01d515687 scsi: mpi3mr: Clean up block devices post controller reset
After a controller reset, if the firmware changes the state of devices to
"hide", then remove those devices from the OS.

Cc: <stable@vger.kernel.org> # v6.6+
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231126053134.10133-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:38:48 -05:00
Chandrakanth patil
e5aab848df scsi: mpi3mr: Refresh sdev queue depth after controller reset
After a controller reset, the firmware may modify the device queue depth.
Therefore, update the device queue depth accordingly.

Cc: <stable@vger.kernel.org> # v5.15+
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231126053134.10133-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:38:47 -05:00
Martin K. Petersen
f200dad9f3 Merge patch series "libfc: fixup command abort handling"
Hannes Reinecke <hare@kernel.org> says:

Hi all,

when testing command timeout with the help of XDP I found that
scsi_try_to_abort_cmd() would always return 'SUCCESS' for FCoE, even
if no commands could be sent over the wire.  Which is not only
surprising, but also can lead to data corruption as commands were
never aborted.  Root cause was that aborts had been sent twice, once
from FC error recovery and once from SCSI EH, with the former inducing
the latter to assume that the command was already aborted.

As usual, comments and reviews are welcome.

Link: https://lore.kernel.org/r/20231129165832.224100-1-hare@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:33:05 -05:00
Hannes Reinecke
be40572c22 scsi: libfc: Map FC_TIMED_OUT to DID_TIME_OUT
When an exchange is completed with FC_TIMED_OUT we should map it to
DID_TIME_OUT to inform the SCSI midlayer that this was a command timeout;
DID_BUS_BUSY implies that the command was never sent which is not the case
here.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231129165832.224100-4-hare@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:32:11 -05:00
Hannes Reinecke
53122a49f4 scsi: libfc: Fix up timeout error in fc_fcp_rec_error()
We should set the status to FC_TIMED_OUT when a timeout error is passed to
fc_fcp_rec_error().

Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231129165832.224100-3-hare@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:32:11 -05:00
Hannes Reinecke
b57c4db5d2 scsi: libfc: Don't schedule abort twice
The current FC error recovery is sending up to three REC (recovery) frames
in 10 second intervals, and as a final step sending an ABTS after 30
seconds for the command itself.  Unfortunately sending an ABTS is also the
action for the SCSI abort handler, and the default timeout for SCSI
commands is also 30 seconds. This causes two ABTS to be scheduled, with the
libfc one slightly earlier. The ABTS scheduled by SCSI EH then sees the
command to be already aborted, and will always return with a 'GOOD' status
irrespective on the actual result from the first ABTS.  This causes the
SCSI EH abort handler to always succeed, and SCSI EH never to be engaged.
Fix this by not issuing an ABTS when a SCSI command is present for the
exchange, but rather wait for the abort scheduled from SCSI EH.  And warn
if an abort is already scheduled to avoid similar errors in the future.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231129165832.224100-2-hare@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:32:11 -05:00
Su Hui
aef6ac1236 scsi: aic7xxx: Return negative error codes in aic7770_probe()
aic7770_config() returns both negative and positive error codes.  It's
better to make aic7770_probe() only return negative error codes.

A previous commit made ahc_linux_register_host() return negative error
codes, which makes sure aic7770_probe() returns negative error codes.

Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231201025955.1584260-4-suhui@nfschina.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:18:40 -05:00
Su Hui
70dfaf84ec scsi: aic7xxx: Return ahc_linux_register_host()'s value rather than zero
ahc_linux_register_host() can return an error code in case of failure. So
ahc_linux_pci_dev_probe() should return the value of
ahc_linux_register_host() rather than zero.

An earlier commit made ahc_linux_register_host() return negative error
codes, which makes sure ahc_linux_pci_dev_probe() returns negative error
codes.

Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231201025955.1584260-3-suhui@nfschina.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:18:40 -05:00
Su Hui
573eb4a341 scsi: aic7xxx: Return negative error codes in ahc_linux_register_host()
ahc_linux_register_host() returns both positive and negative error codes.
It's better to make this function only return negative error codes.

Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231201025955.1584260-2-suhui@nfschina.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:18:40 -05:00
Adam Ford
a0deedcc0c arm64: dts: imx8mm: Slow default video_pll1 clock rate
Since commit 8208181fe5 ("clk: imx: composite-8m:
Add imx8m_divider_determine_rate") the lcdif controller has
had the ability to set the lcdif_pixel rate which propagates
up the tree and sets the video_pll1 rate automatically.

By setting this value low, it will force the recalculation of
video_pll1 to the lowest rate needed by lcdif instead of
dividing a larger clock down to the desired clock speed. This
has the  advantage of being able to lower the video_pll1 rate
from 594MHz to 148.5MHz when operating at 1080p. It can go even
lower when operating at lower resolutions and refresh rates.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06 10:16:33 +08:00
Adam Ford
5b28b39dda arm64: dts: imx8mm: Remove video_pll1 clock rate from clk node
There are two clock-rate assignments for video_pll1, and the
only one it should really have belongs inside the lcdif node,
since it's the only consumer of this clock.  Remove it from
the clk node.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06 10:16:31 +08:00
Adam Ford
b918ab2616 arm64: dts: imx8mm: Simplify mipi_dsi clocks
The device tree clock structure for the mipi_dsi is
unnecessarily redundant.

The default clock parent of IMX8MM_CLK_DSI_PHY_REF is
already IMX8MM_CLK_24M, so there is no need to set the
parent-child relationship between them.  The default clock
rates for IMX8MM_SYS_PLL1_266M and IMX8MM_CLK_24M are
already defined to be 266MHz and 24MHz respectively,
so there is no need to define those clock rates.

On i.MX8M[MNP] the  samsung,pll-clock-frequency is not
necessary, because the driver will read it from sclk_mipi
which is also already set to 24MHz making it also
redundant.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06 10:16:09 +08:00
Artem Chernyshev
25cba909ad scsi: isci: Remove redundant check in isci_task_request_build()
sci_task_request_construct_ssp() has invariant return. Change this function
to void and get rid of unnecessary checks.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Link: https://lore.kernel.org/r/20231128121159.2373975-1-artem.chernyshev@red-soft.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:13:15 -05:00
Philipp Zabel
3a306eacda ARM: dts: imx7s: Add on-chip memory
Add the 128 KiB on-chip SRAM at address 0x900000.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06 10:06:38 +08:00
Michael Ellerman
84e46978b9 scsi: ipr: Remove obsolete check for old CPUs
The IPR driver has a routine to check whether it's running on certain CPU
versions and if so whether the adapter is supported on that CPU.

But none of the CPUs it checks for are supported by Linux anymore.

The most recent CPU it checks for is Power4+ which was removed in commit
471d7ff8b5 ("powerpc/64s: Remove POWER4 support").

So drop the check. That makes the "testmode" module parameter unused, so
remove it as well.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20231127111740.1288463-1-mpe@ellerman.id.au
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:05:09 -05:00
Marco Felsch
edbbae7fba ARM: dts: imx7: add MIPI-DSI support
This adds the device tree support for the MIPI-DSI block. The block can
be used as encoder for the parallel signals coming from the lcdif block.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-06 10:03:32 +08:00
Justin Stitt
712b3f43ba scsi: ibmvscsi: Replace deprecated strncpy() with strscpy()
strncpy() is deprecated for use on NUL-terminated destination strings [1]
and as such we should prefer more robust and less ambiguous string
interfaces.

We expect partition_name to be NUL-terminated based on its usage with
format strings:
|       dev_info(hostdata->dev, "host srp version: %s, "
|                "host partition %s (%d), OS %d, max io %u\n",
|                hostdata->madapter_info.srp_version,
|                hostdata->madapter_info.partition_name,
|                be32_to_cpu(hostdata->madapter_info.partition_number),
|                be32_to_cpu(hostdata->madapter_info.os_type),
|                be32_to_cpu(hostdata->madapter_info.port_max_txu[0]));
...
|       len = snprintf(buf, PAGE_SIZE, "%s\n",
|                hostdata->madapter_info.partition_name);

Moreover, NUL-padding is not required as madapter_info is explicitly
memset to 0:
|       memset(&hostdata->madapter_info, 0x00,
|                       sizeof(hostdata->madapter_info));

Considering the above, a suitable replacement is strscpy() [2] due to the
fact that it guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231030-strncpy-drivers-scsi-ibmvscsi-ibmvscsi-c-v1-1-f8b06ae9e3d5@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:01:52 -05:00
Justin Stitt
a9baa16b4f scsi: ibmvfc: Replace deprecated strncpy() with strscpy()
strncpy() is deprecated for use on NUL-terminated destination strings [1]
and as such we should prefer more robust and less ambiguous string
interfaces.

We expect these fields to be NUL-terminated as the property names from
which they are derived are also NUL-terminated.

Moreover, NUL-padding is not required as our destination buffers are
already NUL-allocated and any future NUL-byte assignments are redundant
(like the ones that strncpy() does).
ibmvfc_probe() ->
|       struct ibmvfc_host *vhost;
|       struct Scsi_Host *shost;
...
| 	shost = scsi_host_alloc(&driver_template, sizeof(*vhost));
... **side note: is this a bug? Looks like a type to me   ^^^^^**
...
|	vhost = shost_priv(shost);

... where shost_priv() is:
|       static inline void *shost_priv(struct Scsi_Host *shost)
|       {
|       	return (void *)shost->hostdata;
|       }

.. and:
scsi_host_alloc() ->
| 	shost = kzalloc(sizeof(struct Scsi_Host) + privsize, GFP_KERNEL);

And for login_info->..., NUL-padding is also not required as it is
explicitly memset to 0:
|	memset(login_info, 0, sizeof(*login_info));

Considering the above, a suitable replacement is strscpy() [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231030-strncpy-drivers-scsi-ibmvscsi-ibmvfc-c-v1-1-5a4909688435@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:01:52 -05:00
Kees Cook
0d224b1088 scsi: zfcp: Replace strlcpy() with strscpy()
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated[1].  Additionally,
it returns the size of the source string, not the resulting size of the
destination string. In an effort to remove strlcpy() completely[2], replace
strlcpy() here with strscpy().

Overflow should be impossible here, but actually check for buffer sizes
being identical with BUILD_BUG_ON(), and include a run-time check as well.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Steffen Maier <maier@linux.ibm.com>
Cc: Benjamin Block <bblock@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: <linux-s390@vger.kernel.org>
Cc: <linux-scsi@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231130204056.it.978-kees@kernel.org
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:01:52 -05:00
Benjamin Coddington
28c58f8a09 scsi: target: Enable READ CAPACITY for PR EARO
SBC-4, Table 13 allows READ CAPACITY for all PR types.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/ad095388dbc550c5b199a1dfa71bcbfc575a7abe.1701272679.git.bcodding@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:01:52 -05:00
Artem Chernyshev
f5f27a332a scsi: fnic: Return error if vmalloc() failed
In fnic_init_module() exists redundant check for return value from
fnic_debugfs_init(), because at moment it only can return zero. It make
sense to process theoretical vmalloc() failure.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 9730ddfb12 ("scsi: fnic: remove redundant assignment of variable rc")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Link: https://lore.kernel.org/r/20231128111008.2280507-1-artem.chernyshev@red-soft.ru
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-12-05 21:01:52 -05:00