For some USB devices we might want to do something different for
usb_choose_configuration(). One example here is the r8152 driver where
we want to end up using the vendor driver with the preferred
interface.
The r8152 driver tried to make things work by implementing a USB
generic_subclass driver and then overriding the normal config
selection after it happened. This is less than ideal and also caused
breakage if someone deauthorized and re-authorized the USB device
because the USB core ended up going back to it's default logic for
choosing the best config. I made an attempt to fix this [1] but it was
a bit ugly.
Let's do this better and allow USB generic_subclass drivers to
override usb_choose_configuration().
[1] https://lore.kernel.org/r/20231130154337.1.Ie00e07f07f87149c9ce0b27ae4e26991d307e14b@changeid
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231201102946.v2.2.Iade5fa31997f1a0ca3e1dec0591633b02471df12@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no real reason that subclassed USB drivers _need_ to define
probe() since they might want to subclass for some other reason. Make
it optional to define probe() if we're a generic_subclass.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231201102946.v2.1.I7ea0dd55ee2acdb48b0e6d28c1a704ab2c29206f@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.
In the case of sysfs call-backs, new wrappers exist that do just that.
This patch replaces just one use of snprintf() found in the sysfs
.show() call-back with the new sysfs_emit() helper.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dmitry Bogdanov <d.bogdanov@yadro.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231130105459.3208986-6-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.
In the case of sysfs call-backs, new wrappers exist that do just that.
This patch replaces just one use of snprintf() found in the sysfs
.show() call-back with the new sysfs_emit() helper.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231130105459.3208986-5-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array. However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it. This misunderstanding has led to buffer-overruns
in the past. It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases). So let's
do that.
The uses in this file both seem to assume that data *has been* written!
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231130105459.3208986-4-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a general misunderstanding amongst engineers that {v}snprintf()
returns the length of the data *actually* encoded into the destination
array. However, as per the C99 standard {v}snprintf() really returns
the length of the data that *would have been* written if there were
enough space for it. This misunderstanding has led to buffer-overruns
in the past. It's generally considered safer to use the {v}scnprintf()
variants in their place (or even sprintf() in simple cases). So let's
do that.
The uses in this file all seem to assume that data *has been* written!
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231130105459.3208986-3-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since snprintf() has the documented, but still rather strange trait of
returning the length of the data that *would have been* written to the
array if space were available, rather than the arguably more useful
length of data *actually* written, it is usually considered wise to use
something else instead in order to avoid confusion.
In the case of sysfs call-backs, new wrappers exist that do just that.
This patch replaces the 2 uses of snprintf() found in the sysfs .show()
call-backs with the new sysfs_emit() helpers. Whist we're at it, let's
replace the sprintf()s as well. For no other reason than consistency.
Link: https://lwn.net/Articles/69419/
Link: https://github.com/KSPP/linux/issues/105
Cc: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Damien Bergamini <damien.bergamini@free.fr>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20231130105459.3208986-2-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver includes the legacy GPIO header <linux/gpio.h> but doesn't
use any symbols from it. Drop it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/20231128-descriptors-iio-v1-1-da1e94755db6@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The example for the TI Palmas ADC is incomplete as the binding is the
full PMIC, not just the sub-functions. It is preferred for MFD examples
to be complete in the top-level MFD device binding rather than piecemeal
in each sub-function binding.
This also fixes an undocumented (by schema) compatible warning for
'"ti,twl6035-pmic", "ti,palmas-pmic"'.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128214803.3975542-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When typec_altmode_put_partner is called by a plug altmode upon release,
the port altmode the plug belongs to will not remove its reference to the
plug. The check to see if the altmode being released evaluates against the
released altmode's partner instead of the calling altmode itself, so change
adev in typec_altmode_put_partner to properly refer to the altmode being
released.
typec_altmode_set_partner is not run for port altmodes, so also add a check
in typec_altmode_release to prevent typec_altmode_put_partner() calls on
port altmode release.
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KOBJ_CHANGE uevent is sent before gadget unbind is actually
executed, resulting in inaccurate uevent emitted at incorrect timing
(the uevent would have USB_UDC_DRIVER variable set while it would
soon be removed).
Move the KOBJ_CHANGE uevent to the end of the unbind function so that
uevent is sent only after the change has been made.
Fixes: 2ccea03a8f ("usb: gadget: introduce UDC Class")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for an external amplifier to be connected in a
gain of two configuration.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231129-ad5791-michael-stuff-v3-2-48e192b00909@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Added new property to support an external amplifier to be connected in a
gain of two configuration.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231129-ad5791-michael-stuff-v3-1-48e192b00909@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery
support to Intel PMT") added an xarray to track the list of vsec devices to
be recovered after a PCI error. But it did not provide cleanup for the list
leading to a memory leak that was caught by kmemleak. Do xa_alloc() before
devm_add_action_or_reset() so that the list may be cleaned up with
xa_erase() in the release function.
Fixes: 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-2-david.e.box@linux.intel.com
[hdegoede@redhat.com: Add missing xa_erase() on error-exit
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The i2c_master_send/recv() functions return negative error codes or the
number of bytes that were able to be sent/received. This code has
two problems. 1) Instead of checking if all the bytes were sent or
received, it checks that at least one byte was sent or received.
2) If there was a partial send/receive then we should return a negative
error code but this code returns success.
Fixes: a9fe713d7d ("drm/bridge: Add PTN3460 bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0cdc2dce-ca89-451a-9774-1482ab2f4762@moroto.mountain
When wm_adsp_buffer_read() fails, we should free buf->regions.
Otherwise, the callers of wm_adsp_buffer_populate() will
directly free buf on failure, which makes buf->regions a leaked
memory.
Fixes: a792af69b0 ("ASoC: wm_adsp: Refactor compress stream initialisation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds support for Huawei MateBook D16 2021
with Ryzen 4600H in driver acp3x-es83xx.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20231202223001.8025-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
Add supplies to the driver that can be used to turn the Lontium lt8912b
on and off. It can have up to 7 independent supplies, we add them all
and enable/disable them with bulk_enable/disable.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115121338.22959-4-francesco@dolcini.it
Add support for suspend and resume. The lt8912b will power off when
going into suspend and power on when resuming.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115121338.22959-2-francesco@dolcini.it
Add Silicom platform (silicom-platform) Linux driver for Swisscom
Business Box (Swisscom BB) as well as Cordoba family products.
This platform driver provides support for various functions via
the Linux LED framework, GPIO framework, Hardware Monitoring (HWMON)
and device attributes.
Signed-off-by: Henry Shi <henryshi2018@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231124200334.5318-1-henryshi2018@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The secure boot state of the BlueField SoC is represented by two bits:
0 = production state
1 = secure boot enabled
2 = non-secure (secure boot disabled)
3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).
The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.
Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.
Fixes: 79e29cb8fb ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
cqspi_jh7110_clk_init() is called after clk_prepare_enable(cqspi->clk),
if it fails, it should goto label 'probe_reset_failed' to disable
cqspi->clk.
In the error path after calling cqspi_jh7110_clk_init(),
cqspi_jh7110_disable_clk() need be called.
Fixes: 33f1ef6d4e ("spi: cadence-quadspi: Add clock configuration for StarFive JH7110 QSPI")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231129081147.628004-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 0ec7731655 ("regmap: Ensure range selector registers
are updated after cache sync") opening pcm512x based soundcards fail
with EINVAL and dmesg shows sync cache and pm_runtime_get errors:
[ 228.794676] pcm512x 1-004c: Failed to sync cache: -22
[ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22
This is caused by the cache check result leaking out into the
regcache_sync return value.
Fix this by making the check local-only, as the comment above the
regcache_read call states a non-zero return value means there's
nothing to do so the return value should not be altered.
Fixes: 0ec7731655 ("regmap: Ensure range selector registers are updated after cache sync")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Reichl <hias@horus.com>
Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The multiplier is already promoted to unsigned long, however the
frequency calculations done when using level indexing mode doesn't
use the multiplier computed. It instead hardcodes the multiplier
value of 1000 at all the usage sites.
Clean that up by assigning the multiplier value of 1000 when using
the perf level indexing mode and update the frequency calculations to
use the multiplier instead. It should fix the possible frequency
truncation for all the values greater than or equal to 4GHz on 64-bit
machines.
Fixes: 31c7c1397a ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fix the possible frequency truncation for all values equal to or greater
4GHz on 64bit machines by updating the multiplier 'mult_factor' to
'unsigned long' type. It is also possible that the multiplier itself can
be greater than or equal to 2^32. So we need to also fix the equation
computing the value of the multiplier.
Fixes: a9e3fbfaa0 ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Merge series from Nam Cao <namcao@linutronix.de>:
While running the spl022, I got the following warning:
BUG: sleeping function called from invalid context at drivers/spi/spi.c:1428
This is because between spi transfers, spi_transfer_delay_exec() (who
may sleep if the delay is >10us) is called in interrupt context. This is
a problem for anyone who runs this driver and need more than 10us delay.
Patch 1 adds an error reporting mechanism, needed by patch 2 who switch
to use the default spi_transfer_one_message(), which fix the problem.
The series is tested with polling transfer mode and interrupt transfer
mode. I can't test the DMA mode, so some help testing here is very
appreciated.
My build test setup compiles allmodconfig all various architectures
(arm64 m68k powerpc riscv s390 sparc64 x86_64) using make -s. If there
is no warning, the only output is
kernel: arch/sparc/boot/image is ready
kernel: arch/sparc/boot/zImage is ready
from the sparc64 build. Copy the incantation from x86 which is silent
when building with make -s and also mentions a version indication.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_aldps_en().
Fixes: 4214cc550b ("r8152: check if disabling ALDPS is finished")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().
Fixes: 9370f2d05a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in
r8156b_wait_loading_flash().
Fixes: 195aae321c ("r8152: support new chips")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous commits added checks for RTL8152_INACCESSIBLE in the loops in
the driver. There are still a few more that keep tripping the driver
up in error cases and make things take longer than they should. Add
those in.
All the loops that are part of this commit existed in some form or
another since the r8152 driver was first introduced, though
RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit
715f67f33a ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE")
Fixes: ac718b6930 ("net/usb: new driver for RTL8152")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As of commit d9962b0d42 ("r8152: Block future register access if
register access fails") there is a race condition that can happen
between the USB device reset thread and napi_enable() (not) getting
called during rtl8152_open(). Specifically:
* While rtl8152_open() is running we get a register access error
that's _not_ -ENODEV and queue up a USB reset.
* rtl8152_open() exits before calling napi_enable() due to any reason
(including usb_submit_urb() returning an error).
In that case:
* Since the USB reset is perform in a separate thread asynchronously,
it can run at anytime USB device lock is not held - even before
rtl8152_open() has exited with an error and caused __dev_open() to
clear the __LINK_STATE_START bit.
* The rtl8152_pre_reset() will notice that the netif_running() returns
true (since __LINK_STATE_START wasn't cleared) so it won't exit
early.
* rtl8152_pre_reset() will then hang in napi_disable() because
napi_enable() was never called.
We can fix the race by making sure that the r8152 reset routines don't
run at the same time as we're opening the device. Specifically we need
the reset routines in their entirety rely on the return value of
netif_running(). The only way to reliably depend on that is for them
to hold the rntl_lock() mutex for the duration of reset.
Grabbing the rntl_lock() mutex for the duration of reset seems like a
long time, but reset is not expected to be common and the rtnl_lock()
mutex is already held for long durations since the core grabs it
around the open/close calls.
Fixes: d9962b0d42 ("r8152: Block future register access if register access fails")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dtschema treats now properties with '-pascal' suffix as standard one
and already defines $ref for them, thus the $ref should be dropped from
the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231129111041.26782-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suman Ghosh says:
====================
octeontx2: Multicast/mirror offload changes
This patchset includes changes to support TC multicast/mirror offload.
Patch #1: Adds changes to support new mailbox to offload multicast/mirror
offload.
Patch #2: Adds TC related changes which uses the newly added mailboxes to
offload multicast/mirror rules.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends TC flower offload support for mirroring ingress
traffic to a different PF/VF. Below is an example command,
'tc filter add dev eth1 ingress protocol ip flower src_ip <ip-addr>
skip_sw action mirred ingress mirror dev eth2'
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new mailbox is added to support offloading of multicast/mirror
functionality. The mailbox also supports dynamic updation of the
multicast/mirror list.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
exec_op implementation for Broadcom STB, Broadband and iProc SoC
This adds exec_op and removes the legacy interface. Based on changes
proposed by Boris Brezillon.
Link: 4ec6f8d8d8
Link: 11b4acffd7
Signed-off-by: David Regan <dregan@broadcom.com>
[Miquel Raynal: Misc style fixes]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-4-dregan@broadcom.com
Pass host struct to bcmnand_ctrl_poll_status instead of ctrl struct
since real time status requires host, and ctrl is a member of host.
Real time status is required for low level commands vs cached status
since the NAND controller will not do an automatic status read at the
end of a low level command as it would with a high level command.
Signed-off-by: David Regan <dregan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-3-dregan@broadcom.com
Allow NAND controller to be responsible for write protect pin
handling during fast path and exec_op destructive operation
when controller_wp flag is set.
Signed-off-by: David Regan <dregan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-2-dregan@broadcom.com
Erase and program operations need the write protect (wp) pin to be
de-asserted to take effect. Add the concept of destructive
operation and pass the information to exec_op() so controllers know
when they should de-assert this pin without having to decode
the command opcode.
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: David Regan <dregan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-1-dregan@broadcom.com
According to Amlogic custom kernels ADC of axg SoC family has
vref_select and requires this setting to work nominally and thus
needs a separate config.
Fixes: 90c6241860 ("iio: adc: meson: init voltage control bits")
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231127235558.71995-1-gnstark@salutedevices.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
DP2.1 Specs added new DPCDs definitions for square pattern configs[1]
These new definitions are used for UHBR Source Transmitter
Equalizations tests[2]. Add the 3 new values for square pattern.
v2: rebase
[1]: DP2.1 Specs - 2.12.3.6.5 Square Pattern
[2]: DP2.1 PHY CTS specs - 4.3 UHBR Source Transmitter Equalization
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130231510.221143-1-khaled.almahallawy@intel.com
v4l2_async_unbind_subdev_one(), which is called in the line
following the list_move() operation contains list_move_tail()
for the same entry and overrides anything list_move() did.
Thus it can be removed.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The list deletion call dropped here is already called from the
helper function in the line before. Having a second list_del()
call results in either a warning (with CONFIG_DEBUG_LIST=y):
list_del corruption, c46c8198->next is LIST_POISON1 (00000100)
If CONFIG_DEBUG_LIST is disabled the operation results in a
kernel error due to NULL pointer dereference.
Fixes: 28a1295795 ("media: v4l: async: Allow multiple connections between entities")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix a simple indentation issue in the v4l2-subdev.h header.
Fixes: f57fa29592 ("media: v4l2-subdev: Add new ioctl for client capabilities")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>