mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,294,499 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Martin Willi
|
c5118072e2 |
net: dsa: b53: Limit chip-wide jumbo frame config to CPU ports
Broadcom switches supported by the b53 driver use a chip-wide jumbo frame
configuration. In the commit referenced with the Fixes tag, the setting
is applied just for the last port changing its MTU.
While configuring CPU ports accounts for tagger overhead, user ports do
not. When setting the MTU for a user port, the chip-wide setting is
reduced to not include the tagger overhead, resulting in an potentially
insufficient chip-wide maximum frame size for the CPU port.
As, by design, the CPU port MTU is adjusted for any user port change,
apply the chip-wide setting only for CPU ports. This aligns the driver
to the behavior of other switch drivers.
Fixes:
|
||
|
Martin Willi
|
66b6095c26 |
net: dsa: mv88e6xxx: Limit chip-wide frame size config to CPU ports
Marvell chips not supporting per-port jumbo frame size configurations use
a chip-wide frame size configuration. In the commit referenced with the
Fixes tag, the setting is applied just for the last port changing its MTU.
While configuring CPU ports accounts for tagger overhead, user ports do
not. When setting the MTU for a user port, the chip-wide setting is
reduced to not include the tagger overhead, resulting in an potentially
insufficient maximum frame size for the CPU port. Specifically, sending
full-size frames from the CPU port on a MV88E6097 having a user port MTU
of 1500 bytes results in dropped frames.
As, by design, the CPU port MTU is adjusted for any user port change,
apply the chip-wide setting only for CPU ports.
Fixes:
|
||
Lorenzo Bianconi
|
4e076ff6ad |
net: airoha: Fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()
Move page_pool_get_dma_dir() inside the while loop of
airoha_qdma_cleanup_rx_queue routine in order to avoid possible NULL
pointer dereference if airoha_qdma_init_rx_queue() fails before
properly allocating the page_pool pointer.
Fixes:
|
||
Conor Dooley
|
fc28d1c1fe |
spi: spidev: add correct compatible for Rohm BH2228FV
When Maxime originally added the BH2228FV to the spidev driver, he spelt
it incorrectly - the d should have been a b. Add the correctly spelt
compatible to the driver. Although the majority of users of this
compatible are abusers, there is at least one board that validly uses
the incorrect spelt compatible, so keep it in the driver to avoid
breaking the few real users it has.
Fixes:
|
||
|
Conor Dooley
|
5170dae559 |
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
When Maxime originally added the BH2228FV to the spidev driver, he spelt
it incorrectly - the d should have been a b. That spelling was then
propagated to the binding when written by Krzysztof. Add a new, correctly
spelt compatible and advise against using the incorrectly spelling.
Fixes:
|
||
Venkata Prasad Potturu
|
f2038c12e8 |
ASoC: sof: amd: fix for firmware reload failure in Vangogh platform
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure, as per design clock source should be internal
clock.
Remove acp_clkmux_sel field so that ACP will use internal clock
source when ACP enters into D0 state.
Fixes:
|
||
Jack Wu
|
a1a305375d |
net: wwan: t7xx: add support for Dell DW5933e
add support for Dell DW5933e (0x14c0, 0x4d75) Signed-off-by: Jack Wu <wojackbb@gmail.com> Link: https://patch.msgid.link/20240716024902.16054-1-wojackbb@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Paolo Abeni
|
ab1a2a5288 |
Merge branch 'ipv4-fix-incorrect-tos-in-route-get-reply'
Ido Schimmel says: ==================== ipv4: Fix incorrect TOS in route get reply Two small fixes for incorrect TOS in route get reply. See more details in the commit messages. No regressions in FIB tests: # ./fib_tests.sh [...] Tests passed: 218 Tests failed: 0 ==================== Link: https://patch.msgid.link/20240715142354.3697987-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Ido Schimmel
|
f036e68212 |
ipv4: Fix incorrect TOS in fibmatch route get reply
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 tos 0x1c dev dummy1 proto kernel scope link src 192.0.2.1
Fix by instead returning the DSCP field from the FIB result structure
which was populated during the route lookup.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 dev dummy1 proto kernel scope link src 192.0.2.1
Extend the existing selftests to not only verify that the correct route
is returned, but that it is also returned with correct "tos" value (or
without it).
Fixes:
|
||
|
Ido Schimmel
|
338bb57e4c |
ipv4: Fix incorrect TOS in route get reply
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get 192.0.2.2 tos 0xfc
192.0.2.2 tos 0x1c dev dummy1 src 192.0.2.1 uid 0
cache
Fix by adding a DSCP field to the FIB result structure (inside an
existing 4 bytes hole), populating it in the route lookup and using it
when filling the route get reply.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get 192.0.2.2 tos 0xfc
192.0.2.2 dev dummy1 src 192.0.2.1 uid 0
cache
Fixes:
|
||
Pablo Neira Ayuso
|
120f1c857a |
net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE
The following splat is easy to reproduce upstream as well as in -stable kernels. Florian Westphal provided the following commit: |
||
Christian Brauner
|
280e36f0d5 |
nsfs: use cleanup guard
Ensure that rcu read lock is given up before returning.
Link: https://lore.kernel.org/r/20240716-elixier-fliesen-1ab342151a61@brauner
Fixes:
|
||
Jeff Johnson
|
400e4064b6 |
fs/adfs: add MODULE_DESCRIPTION
Fix the 'make W=1' issue: WARNING: modpost: missing MODULE_DESCRIPTION() in fs/adfs/adfs.o Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240523-md-adfs-v1-1-364268e38370@quicinc.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Vamsi Attunuru
|
5418e6dfc9 |
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
Upon adding CONFIG_ARCH_THUNDER & CONFIG_COMPILE_TEST dependency,
compilation errors arise on 32-bit ARM with writeq() & readq() calls
which are used for accessing 64-bit values.
Since DPI hardware only works with 64-bit register accesses, using
CONFIG_64BIT dependency to skip compilation on 32-bit systems.
Fixes:
|
||
Günther Noack
|
f4b89d8ce5 |
landlock: Various documentation improvements
* Fix some typos, incomplete or confusing phrases. * Split paragraphs where appropriate. * List the same error code multiple times, if it has multiple possible causes. * Bring wording closer to the man page wording, which has undergone more thorough review (esp. for LANDLOCK_ACCESS_FS_WRITE_FILE). * Small semantic clarifications * Call the ephemeral port range "ephemeral" * Clarify reasons for EFAULT in landlock_add_rule() * Clarify @rule_type doc for landlock_add_rule() This is a collection of small fixes which I collected when preparing the corresponding man pages [1]. Cc: Alejandro Colomar <alx@kernel.org> Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Link: https://lore.kernel.org/r/20240715155554.2791018-1-gnoack@google.com [1] Signed-off-by: Günther Noack <gnoack@google.com> Link: https://lore.kernel.org/r/20240715160328.2792835-2-gnoack@google.com [mic: Add label to link, fix formatting spotted by make htmldocs, synchronize userspace-api documentation's date] Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
Shay Drory
|
c14112a557 |
driver core: auxiliary bus: Fix documentation of auxiliary_device
Fix the documentation of the below field of struct auxiliary_device
include/linux/auxiliary_bus.h:150: warning: Function parameter or struct member 'sysfs' not described in 'auxiliary_device'
include/linux/auxiliary_bus.h:150: warning: Excess struct member 'irqs' description in 'auxiliary_device'
include/linux/auxiliary_bus.h:150: warning: Excess struct member 'lock' description in 'auxiliary_device'
include/linux/auxiliary_bus.h:150: warning: Excess struct member 'irq_dir_exists' description in 'auxiliary_device'
Fixes:
|
||
|
Lorenzo Bianconi
|
1f038d5897 |
net: airoha: fix error branch in airoha_dev_xmit and airoha_set_gdm_ports
Fix error case management in airoha_dev_xmit routine since we need to
DMA unmap pending buffers starting from q->head.
Moreover fix a typo in error case branch in airoha_set_gdm_ports
routine.
Fixes:
|
||
Joshua Washington
|
03b54bad26 |
gve: Fix XDP TX completion handling when counters overflow
In gve_clean_xdp_done, the driver processes the TX completions based on
a 32-bit NIC counter and a 32-bit completion counter stored in the tx
queue.
Fix the for loop so that the counter wraparound is handled correctly.
Fixes:
|
||
Michael Ellerman
|
9ff0251b2e |
Merge branch 'topic/ppc-kvm' into next
Merge the powerpc KVM topic branch. |
||
Alexey Dobriyan
|
67856f44da |
ia64: scrub ia64 from poison.h
Link: https://lkml.kernel.org/r/c72e5467-06a8-4739-ae6a-7c84c96cad77@p183 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Thomas Gleixner
|
f944ffcbc2 |
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
For systems on which the performance counter can expire early due to turbo
modes the watchdog handler has a safety net in place which validates that
since the last watchdog event there has at least 4/5th of the watchdog
period elapsed.
This works reliably only after the first watchdog event because the per
CPU variable which holds the timestamp of the last event is never
initialized.
So a first spurious event will validate against a timestamp of 0 which
results in a delta which is likely to be way over the 4/5 threshold of the
period. As this might happen before the first watchdog hrtimer event
increments the watchdog counter, this can lead to false positives.
Fix this by initializing the timestamp before enabling the hardware event.
Reset the rearm counter as well, as that might be non zero after the
watchdog was disabled and reenabled.
Link: https://lkml.kernel.org/r/87frsfu15a.ffs@tglx
Fixes:
|
||
Yu Zhao
|
30d77b7eef |
mm/mglru: fix ineffective protection calculation
mem_cgroup_calculate_protection() is not stateless and should only be used
as part of a top-down tree traversal. shrink_one() traverses the per-node
memcg LRU instead of the root_mem_cgroup tree, and therefore it should not
call mem_cgroup_calculate_protection().
The existing misuse in shrink_one() can cause ineffective protection of
sub-trees that are grandchildren of root_mem_cgroup. Fix it by reusing
lru_gen_age_node(), which already traverses the root_mem_cgroup tree, to
calculate the protection.
Previously lru_gen_age_node() opportunistically skips the first pass,
i.e., when scan_control->priority is DEF_PRIORITY. On the second pass,
lruvec_is_sizable() uses appropriate scan_control->priority, set by
set_initial_priority() from lru_gen_shrink_node(), to decide whether a
memcg is too small to reclaim from.
Now lru_gen_age_node() unconditionally traverses the root_mem_cgroup tree.
So it should call set_initial_priority() upfront, to make sure
lruvec_is_sizable() uses appropriate scan_control->priority on the first
pass. Otherwise, lruvec_is_reclaimable() can return false negatives and
result in premature OOM kills when min_ttl_ms is used.
Link: https://lkml.kernel.org/r/20240712232956.1427127-1-yuzhao@google.com
Fixes:
|
||
Dan Carpenter
|
b749cb0d61 |
mm/zswap: fix a white space issue
We accidentally deleted a tab in commit f84152e9efc5 ("mm/zswap: use only
one pool in zswap"). Add it back.
Link: https://lkml.kernel.org/r/c15066a0-f061-42c9-b0f5-d60281d3d5d8@stanley.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Miaohe Lin
|
1390a3334a |
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
A kernel crash was observed when migrating hugetlb folio: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 3435 Comm: bash Not tainted 6.10.0-rc6-00450-g8578ca01f21f #66 RIP: 0010:__folio_undo_large_rmappable+0x70/0xb0 RSP: 0018:ffffb165c98a7b38 EFLAGS: 00000097 RAX: fffffbbc44528090 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffffa30e000a2800 RSI: 0000000000000246 RDI: ffffa3153ffffcc0 RBP: fffffbbc44528000 R08: 0000000000002371 R09: ffffffffbe4e5868 R10: 0000000000000001 R11: 0000000000000001 R12: ffffa3153ffffcc0 R13: fffffbbc44468000 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f5b3a716740(0000) GS:ffffa3151fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010959a000 CR4: 00000000000006f0 Call Trace: <TASK> __folio_migrate_mapping+0x59e/0x950 __migrate_folio.constprop.0+0x5f/0x120 move_to_new_folio+0xfd/0x250 migrate_pages+0x383/0xd70 soft_offline_page+0x2ab/0x7f0 soft_offline_page_store+0x52/0x90 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5b3a514887 RSP: 002b:00007ffe138fce68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f5b3a514887 RDX: 000000000000000c RSI: 0000556ab809ee10 RDI: 0000000000000001 RBP: 0000556ab809ee10 R08: 00007f5b3a5d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007f5b3a61b780 R14: 00007f5b3a617600 R15: 00007f5b3a616a00 It's because hugetlb folio is passed to __folio_undo_large_rmappable() unexpectedly. large_rmappable flag is imperceptibly set to hugetlb folio since commit |
||
|
Miaohe Lin
|
667574e873 |
mm/hugetlb: fix possible recursive locking detected warning
When tries to demote 1G hugetlb folios, a lockdep warning is observed:
============================================
WARNING: possible recursive locking detected
6.10.0-rc6-00452-ga4d0275fa660-dirty #79 Not tainted
--------------------------------------------
bash/710 is trying to acquire lock:
ffffffff8f0a7850 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0x244/0x460
but task is already holding lock:
ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&h->resize_lock);
lock(&h->resize_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by bash/710:
#0: ffff8f118439c3f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0
#1: ffff8f11893b9e88 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0
#2: ffff8f1183dc4428 (kn->active#98){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0
#3: ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460
stack backtrace:
CPU: 3 PID: 710 Comm: bash Not tainted 6.10.0-rc6-00452-ga4d0275fa660-dirty #79
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
__lock_acquire+0x10f2/0x1ca0
lock_acquire+0xbe/0x2d0
__mutex_lock+0x6d/0x400
demote_store+0x244/0x460
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x380/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xb9/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa61db14887
RSP: 002b:00007ffc56c48358 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fa61db14887
RDX: 0000000000000002 RSI: 000055a030050220 RDI: 0000000000000001
RBP: 000055a030050220 R08: 00007fa61dbd1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
R13: 00007fa61dc1b780 R14: 00007fa61dc17600 R15: 00007fa61dc16a00
</TASK>
Lockdep considers this an AA deadlock because the different resize_lock
mutexes reside in the same lockdep class, but this is a false positive.
Place them in distinct classes to avoid these warnings.
Link: https://lkml.kernel.org/r/20240712031314.2570452-1-linmiaohe@huawei.com
Fixes:
|
||
yangge
|
33dfe9204f |
mm/gup: clear the LRU flag of a page before adding to LRU batch
If a large number of CMA memory are configured in system (for example,
the CMA memory accounts for 50% of the system memory), starting a
virtual virtual machine with device passthrough, it will call
pin_user_pages_remote(..., FOLL_LONGTERM, ...) to pin memory. Normally
if a page is present and in CMA area, pin_user_pages_remote() will
migrate the page from CMA area to non-CMA area because of FOLL_LONGTERM
flag. But the current code will cause the migration failure due to
unexpected page refcounts, and eventually cause the virtual machine
fail to start.
If a page is added in LRU batch, its refcount increases one, remove the
page from LRU batch decreases one. Page migration requires the page is
not referenced by others except page mapping. Before migrating a page,
we should try to drain the page from LRU batch in case the page is in
it, however, folio_test_lru() is not sufficient to tell whether the
page is in LRU batch or not, if the page is in LRU batch, the migration
will fail.
To solve the problem above, we modify the logic of adding to LRU batch.
Before adding a page to LRU batch, we clear the LRU flag of the page
so that we can check whether the page is in LRU batch by
folio_test_lru(page). It's quite valuable, because likely we don't
want to blindly drain the LRU batch simply because there is some
unexpected reference on a page, as described above.
This change makes the LRU flag of a page invisible for longer, which
may impact some programs. For example, as long as a page is on a LRU
batch, we cannot isolate it, and we cannot check if it's an LRU page.
Further, a page can now only be on exactly one LRU batch. This doesn't
seem to matter much, because a new page is allocated from buddy and
added to the lru batch, or be isolated, it's LRU flag may also be
invisible for a long time.
Link: https://lkml.kernel.org/r/1720075944-27201-1-git-send-email-yangge1116@126.com
Link: https://lkml.kernel.org/r/1720008153-16035-1-git-send-email-yangge1116@126.com
Fixes:
|
||
Tvrtko Ursulin
|
af649773fb |
mm/numa_balancing: teach mpol_to_str about the balancing mode
Since balancing mode was added in |
||
Roman Gushchin
|
5316b497c5 |
mm: memcg1: convert charge move flags to unsigned long long
Currently MOVE_ANON and MOVE_FILE flags are defined as integers
and it leads to the following Smatch static checker warning:
mm/memcontrol-v1.c:609 mem_cgroup_move_charge_write()
warn: was expecting a 64 bit value instead of '~(1 | 2)'
Fix this be redefining them as unsigned long long.
Even though the issue allows to set high 32 bits of mc.flags
to an arbitrary number, these bits are never used, so it doesn't
have any significant consequences.
Link: https://lkml.kernel.org/r/ZpF8Q9zBsIY7d2P9@google.com
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Suren Baghdasaryan
|
6ab42fe21c |
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
pgalloc_tag_sub() might call page_ext_put() using a page different from
the one used in page_ext_get() call. This does not pose an issue since
page_ext_put() ignores this parameter as long as it's non-NULL but
technically this is wrong. Fix it by storing the original page used in
page_ext_get() and passing it to page_ext_put().
Link: https://lkml.kernel.org/r/20240711220457.1751071-3-surenb@google.com
Fixes:
|
||
|
Suren Baghdasaryan
|
fd8acc0097 |
lib: reuse page_ext_data() to obtain codetag_ref
codetag_ref_from_page_ext() reimplements the same calculation as
page_ext_data(). Reuse existing function instead.
Link: https://lkml.kernel.org/r/20240711220457.1751071-2-surenb@google.com
Fixes:
|
||
|
Suren Baghdasaryan
|
4810a82c8a |
lib: add missing newline character in the warning message
Link: https://lkml.kernel.org/r/20240711220457.1751071-1-surenb@google.com
Fixes:
|
||
|
Yu Zhao
|
3f74e6bd3b |
mm/mglru: fix overshooting shrinker memory
set_initial_priority() tries to jump-start global reclaim by estimating
the priority based on cold/hot LRU pages. The estimation does not account
for shrinker objects, and it cannot do so because their sizes can be in
different units other than page.
If shrinker objects are the majority, e.g., on TrueNAS SCALE 24.04.0 where
ZFS ARC can use almost all system memory, set_initial_priority() can
vastly underestimate how much memory ARC shrinker can evict and assign
extreme low values to scan_control->priority, resulting in overshoots of
shrinker objects.
To reproduce the problem, using TrueNAS SCALE 24.04.0 with 32GB DRAM, a
test ZFS pool and the following commands:
fio --name=mglru.file --numjobs=36 --ioengine=io_uring \
--directory=/root/test-zfs-pool/ --size=1024m --buffered=1 \
--rw=randread --random_distribution=random \
--time_based --runtime=1h &
for ((i = 0; i < 20; i++))
do
sleep 120
fio --name=mglru.anon --numjobs=16 --ioengine=mmap \
--filename=/dev/zero --size=1024m --fadvise_hint=0 \
--rw=randrw --random_distribution=random \
--time_based --runtime=1m
done
To fix the problem:
1. Cap scan_control->priority at or above DEF_PRIORITY/2, to prevent
the jump-start from being overly aggressive.
2. Account for the progress from mm_account_reclaimed_pages(), to
prevent kswapd_shrink_node() from raising the priority
unnecessarily.
Link: https://lkml.kernel.org/r/20240711191957.939105-2-yuzhao@google.com
Fixes:
|
||
|
Yu Zhao
|
8b671fe1a8 |
mm/mglru: fix div-by-zero in vmpressure_calc_level()
evict_folios() uses a second pass to reclaim folios that have gone through
page writeback and become clean before it finishes the first pass, since
folio_rotate_reclaimable() cannot handle those folios due to the
isolation.
The second pass tries to avoid potential double counting by deducting
scan_control->nr_scanned. However, this can result in underflow of
nr_scanned, under a condition where shrink_folio_list() does not increment
nr_scanned, i.e., when folio_trylock() fails.
The underflow can cause the divisor, i.e., scale=scanned+reclaimed in
vmpressure_calc_level(), to become zero, resulting in the following crash:
[exception RIP: vmpressure_work_fn+101]
process_one_work at ffffffffa3313f2b
Since scan_control->nr_scanned has no established semantics, the potential
double counting has minimal risks. Therefore, fix the problem by not
deducting scan_control->nr_scanned in evict_folios().
Link: https://lkml.kernel.org/r/20240711191957.939105-1-yuzhao@google.com
Fixes:
|
||
Kees Cook
|
0b84780134 |
mm/kmemleak: replace strncpy() with strscpy()
Replace the depreciated[1] strncpy() calls with strscpy(). Uses of object->comm do not depend on the padding side-effect. Link: https://github.com/KSPP/linux/issues/90 [1] Link: https://lkml.kernel.org/r/20240710001300.work.004-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Vlastimil Babka
|
53dabce265 |
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
This mostly reverts commit
|
||
|
Vlastimil Babka
|
a7526fe8b9 |
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
Patch series "revert unconditional slab and page allocator fault injection calls". These two patches largely revert commits that added function call overhead into slab and page allocation hotpaths and that cannot be currently disabled even though related CONFIG_ options do exist. A much more involved solution that can keep the callsites always existing but hidden behind a static key if unused, is possible [1] and can be pursued by anyone who believes it's necessary. Meanwhile the fact the should_failslab() error injection is already not functional on kernels built with current gcc without anyone noticing [2], and lukewarm response to [1] suggests the need is not there. I believe it will be more fair to have the state after this series as a baseline for possible further optimisation, instead of the unconditional overhead. For example a possible compromise for anyone who's fine with an empty function call overhead but not the full CONFIG_FAILSLAB / CONFIG_FAIL_PAGE_ALLOC overhead is to reuse patch 1 from [1] but insert a static key check only inside should_failslab() and should_fail_alloc_page() before performing the more expensive checks. [1] https://lore.kernel.org/all/20240620-fault-injection-statickeys-v2-0-e23947d3d84b@suse.cz/#t [2] https://github.com/bpftrace/bpftrace/issues/3258 This patch (of 2): This mostly reverts commit |
||
Pei Li
|
7b7aca6d7c |
mm: ignore data-race in __swap_writepage
Syzbot reported a possible data race: BUG: KCSAN: data-race in __swap_writepage / scan_swap_map_slots read-write to 0xffff888102fca610 of 8 bytes by task 7106 on cpu 1. read to 0xffff888102fca610 of 8 bytes by task 7080 on cpu 0. While we are in __swap_writepage to read sis->flags, scan_swap_map_slots is trying to update it with SWP_SCANNING. value changed: 0x0000000000008083 -> 0x0000000000004083. While this can be updated non-atomicially, this won't affect SWP_SYNCHRONOUS_IO, so we consider this data-race safe. This is possibly introduced by commit |
||
Donet Tom
|
dffe24e958 |
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
generic_hugetlb_get_unmapped_area() was returning an address less than
mmap_min_addr if the mmap argument addr, after alignment, was less than
mmap_min_addr, causing mmap to fail.
This is because current generic_hugetlb_get_unmapped_area() code does not
take into account mmap_min_addr.
This patch ensures that generic_hugetlb_get_unmapped_area() always returns
an address that is greater than mmap_min_addr. Additionally, similar to
generic_get_unmapped_area(), vm_end_gap() checks are included to maintain
stack gap.
How to reproduce
================
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <unistd.h>
#define HUGEPAGE_SIZE (16 * 1024 * 1024)
int main() {
void *addr = mmap((void *)-1, HUGEPAGE_SIZE,
PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
exit(EXIT_FAILURE);
}
snprintf((char *)addr, HUGEPAGE_SIZE, "Hello, Huge Pages!");
printf("%s\n", (char *)addr);
if (munmap(addr, HUGEPAGE_SIZE) == -1) {
perror("munmap");
exit(EXIT_FAILURE);
}
return 0;
}
Result without fix
==================
# cat /proc/meminfo |grep -i HugePages_Free
HugePages_Free: 20
# ./test
mmap: Permission denied
#
Result with fix
===============
# cat /proc/meminfo |grep -i HugePages_Free
HugePages_Free: 20
# ./test
Hello, Huge Pages!
#
Link: https://lkml.kernel.org/r/20240710051912.4681-1-donettom@linux.ibm.com
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reported-by Pavithra Prakash <pavrampu@linux.vnet.ibm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Linus Torvalds
|
b1bc554e00 |
media updates for v6.11-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmaXfCQACgkQCF8+vY7k 4RWuBg/+NRAVuzYW3AQPIaggajTGHfkk6WCTCVgQQZFCDqphS6YtgfXUJ8qO5YXk ZieGu+g2081BFehzcZxcaSo9pFWyqX1fjUU2sjFwRDSl9NRctsjvKE9J1DVKCsMW QU5yOYyBJmoVugj4YCH7Yga8OElZAWperxJidV4AmFkX93OwZDZl+wNKuSTmG/lX ju+Z6yzv0DN0WvgL8+LlZ2k5tpx+kAld07FFwQM54MPI9CBWyQjogGyro/1S6ymh WAbwbEMCvGSvGhi4issMMOK2mpmh2EAKCXBMWF5bXNOLuFWrU9TtCBr6AITKDvn7 btQNpa8GApO+GehEQtWOX5WgZp2ypwCrMUtiwftPOtF4Z8Tl7MJfn4u6wWCxj4cy 67HbOgWRZQRIzyUSF8vay6PeMrh8jYi+unWuOxGpnzilno1nV2hTzh4n1we15qIn 8pnNSbtgrJCvrIgtATYjP1FWgjBxwuNIpFGxo2ly+hgbu6COLZFfg0Oju3FBdOF1 ZxGkp1SaxcKeuFa6kbATj7y2dAjtre8drB9RfJY1C97Ta+C9ws4jBytVHbceA7u+ GJfAis2CEStLPpe3ND9n0ekeB/qSPcgGC2HLQR7L1u30Kx75T4I49HF0lcKev9gK oTRUPvZu/bI6NmSRwYYY7jo1rox5ffftJ2ZICeQaluV2dbOMUc8= =7nBb -----END PGP SIGNATURE----- Merge tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor drivers: gc05a2, gc08a3 and imx283 - New serializer/deserializer drivers: max96714 and max96717 - New JPEG encoder driver: e5010 - Support for Raspberry Pi PiSP Backend (BE) ISP driver - Old documentation for av7110 driver removed, as a new version was added as Documentation/userspace-api/media/dvb/legacy*.rst - atompisp: Linux firmwares are now available, so drop firmware-related task from TODO and update firmware logic - The imx258 driver has gained several improvements - wave5 driver has gained support for HEVC decoding - em28xx gained support for MyGica UTV3 - av7110 budget-patch driver removed - Lots of other cleanups, improvements and fixes * tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits) media: raspberrypi: Switch to remove_new media: uapi: pisp_be_config: Add extra config fields media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config media: uapi: pisp_common: Capitalize all macros media: uapi: pisp_common: Add 32 bpp format test media: uapi: pisp_be_config: Drop BIT() from uAPI media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs media: atomisp: Fix spelling mistakes in sh_css_sp.c media: atomisp: Fix spelling mistake in ia_css_debug.c media: atomisp: Fix spelling mistake in hmm_bo.c media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c media: atomisp: Fix spelling mistake in sh_css_internal.h media: atomisp: Fix spelling mistake "pipline" -> "pipeline" media: atomisp: Remove unused GPIO related defines and APIs media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert() media: atomisp: Clean up unused macros from math_support.h media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2 media: atomisp: Update TODO media: atomisp: Prefix firmware paths with "intel/ipu/" media: atomisp: Remove firmware_name module parameter ... |
||
|
Linus Torvalds
|
0ffb8a4c96 |
Devicetree updates for v6.11:
DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface, new
Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75 GPI
DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and CSI-2
blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'
-----BEGIN PGP SIGNATURE-----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=tjMz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
|
||
|
Linus Torvalds
|
5b9ac6c2a7 |
hte: Changes for v6.11-rc1
The changes for the hte/timestamp subsystem include the following: - Added module description in hte test to silence modpost warnings. -----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQT4slW2T0Q/rXAa29f4pUxhzZTZKAUCZpa2cRIcZGlwZW5wQG52 aWRpYS5jb20ACgkQ+KVMYc2U2SgUgwD+N4O6FWKs/MKPU7uTK+u9nK3jxN4ryNV3 oIx8sz4/uWgBAOwyQsbI7bozMNisAjMWN1rsKxnfWU3ys1ePTlOfm3oC =OVQ6 -----END PGP SIGNATURE----- Merge tag 'for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux Pull hardware timestamp update from Dipen Patel: - Add module description in hte test to silence modpost warnings * tag 'for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux: hte: tegra-194: add missing MODULE_DESCRIPTION() macro |
||
|
Linus Torvalds
|
fea17683c4 |
- Core Frameworks
- Add new Trigger for Input Events
- Add new led_mc_set_brightness() call to adapt colour/brightness for mutli-colour LEDs
- Add new lled_mc_trigger_event() call to call the above based on given trigger conditions
- Add new led_get_color_name() call, a wrapper around the existing led_colors[] array
- Add a new flag to avoid automatic renaming of LED devices
- New Drivers
- Add support for Silergy SY7802 Flash LED Controller
- Add support for Texas Instruments LP5569 LED Controller
- Add support for ChromeOS EC LED Controller
- New Device Support
- Add support for KTD202{6,7} to Kinetic KTD2026/7 LEDs
- Fix-ups
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Use generic platform device properties instead of OF/ACPI specific ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
- Bug Fixes
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error handling routines
- Repair locking issue causing circular dependency splats and lock-ups
- Unregister sysfs entries before deactivating triggers to prevent use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW triggers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmaWgMEACgkQUa+KL4f8
d2Glng//Sw3+ev7IFn4PmNfMHtKeWlJEerT8kyF0GdK05zn7ImlydkSVW5RvHN8B
J2A8cfXXkhggYoG2i4zjs1wtfPDXP9iJMhVaRnPPuWgYJpPrhUFSSkJKiauSKyGN
Tp3Vn6QaHM5Gs/THUidcTV0+USE6j9+DXdLjLASAi2YXqoGCC3KWcq4Hb6NdGM/Q
ajEuGnrO1HEF0dOaEgkYuNIXcADHzeeQlU0Y96bGv7qnUBw7LAIpH+AC1d49jcXS
gIJNxmtmn0QqCK0/lS74DmR9r2quofeYer6G5WDJVv72R8KIljFN16AGFLdC8ID/
3B4JnjQKpEyn344gmvqzx23dp3jqvCupgDcojR6RY7yIZTXSjg0R0OocKYQlDnNY
LoNZqZ9J2nNDWNlx7r7PXuIAm7Bb9kdY0/PWgXOwWsEb19DcxyAHE3+xGeyQF6f5
/s1bGZxQyfBnDZm8+XiJ6KTsiZ1t0MljG9y7xil6vtzJIJTynao9qzZipcrx7UuT
3UyoGa/Z4o95OkQye9n6tKGJJDKLJIZL7x4pGOW3HeHgfvJ1koyHr8WwhmK4Zoh/
xeHfHABuaMoulTsuGjtnRP4/UWOTEf2hh7FK1mSrpxSCvv+I9W4lTO9QBkXU8xuD
1oCekcTYWOwKhxaFX4jjaGEHXIWYzXDjE7hqroLzj8Ifhqe9xrc=
=0Kyu
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- New trigger for Input Events
- New led_mc_set_brightness() call to adapt colour/brightness for
mutli-colour LEDs
- New lled_mc_trigger_event() call to call the above based on given
trigger conditions
- New led_get_color_name() call, a wrapper around the existing
led_colors[] array
- A new flag to avoid automatic renaming of LED devices
New Drivers:
- Silergy SY7802 Flash LED Controller
- Texas Instruments LP5569 LED Controller
- ChromeOS EC LED Controller
New Device Support:
- KTD202{6,7} support for Kinetic KTD2026/7 LEDs
Fix-ups:
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity and
avoid duplication
- Use generic platform device properties instead of OF/ACPI specific
ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
Bug Fixes:
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error
handling routines
- Repair locking issue causing circular dependency splats and
lock-ups
- Unregister sysfs entries before deactivating triggers to prevent
use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW
triggers"
* tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (65 commits)
leds: leds-lp5569: Enable chip after chip configuration
leds: leds-lp5569: Better handle enabling clock internal setting
leds: leds-lp5569: Fix typo in driver name
leds: flash: leds-qcom-flash: Test the correct variable in init
leds: leds-lp55xx: Convert mutex lock/unlock to guard API
leds: leds-lp5523: Convert to sysfs_emit API
leds: leds-lp5569: Convert to sysfs_emit API
Revert "leds: led-core: Fix refcount leak in of_led_get()"
leds: leds-lp5569: Add support for Texas Instruments LP5569
leds: leds-lp55xx: Drop deprecated defines
leds: leds-lp55xx: Support ENGINE program up to 128 bytes
leds: leds-lp55xx: Generalize sysfs master_fader
leds: leds-lp55xx: Generalize sysfs engine_leds
leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
leds: leds-lp55xx: Generalize stop_engine function
leds: leds-lp55xx: Generalize turn_off_channels function
leds: leds-lp55xx: Generalize set_led_current function
leds: leds-lp55xx: Generalize multicolor_brightness function
leds: leds-lp55xx: Generalize led_brightness function
leds: leds-lp55xx: Generalize firmware_loaded function
...
|
||
|
Linus Torvalds
|
e0d97b04ec |
- New Drivers
- Add support for Texas Instruments LM3509 Backlight Driver
- Fix-ups
- Device Tree binding adaptions/conversions/creation
- Drop i2c_device_id::driver_data where the value is unused
- Make use of the new *_scoped() guard APIs
- Decouple from fbdev by providing Backlight with its own BACKLIGHT_POWER_* constrains
- Bug Fixes
- Correctly assess return values (NULL vs IS_ERR())
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
-----BEGIN PGP SIGNATURE-----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=5udf
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Texas Instruments LM3509 Backlight Driver
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Drop i2c_device_id::driver_data where the value is unused
- Make use of the new *_scoped() guard APIs
- Decouple from fbdev by providing Backlight with its own
BACKLIGHT_POWER_* constrains
Bug Fixes:
- Correctly assess return values (NULL vs IS_ERR())
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings"
* tag 'backlight-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (23 commits)
backlight: sky81452-backlight: Use backlight power constants
backlight: rave-sp-backlight: Use backlight power constants
backlight: pwm-backlight: Use backlight power constants
backlight: pcf50633-backlight: Use backlight power constants
backlight: pandora-backlight: Use backlight power constants
backlight: mp3309c: Use backlight power constants
backlight: lm3533-backlight: Use backlight power constants
backlight: led-backlight: Use backlight power constants
backlight: ktd253-backlight: Use backlight power constants
backlight: kb3886-bl: Use backlight power constants
backlight: journada_bl: Use backlight power constants
backlight: ipaq-micro-backlight: Use backlight power constants
backlight: gpio-backlight: Use backlight power constants
backlight: corgi-lcd: Use backlight power constants
backlight: ams369fb06: Use backlight power constants
backlight: aat2870-backlight: Use blacklight power constants
backlight: Add BACKLIGHT_POWER_ constants for power states
backlight: lm3509_bl: Fix early returns in for_each_child_of_node()
backlight: Drop explicit initialization of struct i2c_device_id::driver_data to 0
backlight: Add missing MODULE_DESCRIPTION() macros
...
|
||
|
Linus Torvalds
|
1200af3ac1 |
- New Drivers
- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----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=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|
||
|
Linus Torvalds
|
6e504d2c61 |
for-linus-2024071601
-----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmaWVnITHGJlbnRpc3NA a2VybmVsLm9yZwAKCRDsxfBeGdlKNvC2D/0ZkIRcJn8OU3j8vbSE2D10hy3tyDZa 3P5rI2UrlE6NPlJUo755VBEaLe608481TNZlhIKQ6LFzmUdlj3C7bKiCOQ6KLOyT ZoCeRS3cVgNfSEnF5N6SwfuVW3PgXo6GC6pueNcNepLIVnWGJ5QhLmiLOzPr0YER mW/y3s447TxecQ803UYtaFQnwSOhxzWvN+G7mnzkz2PNpta3UJ68jsqxQOivrSV0 mEx4W5VN6MYaSVZ2c5s+LIcn48+LMGNwkRAdMkFUAksLDNwvSIgdgRcjaJhpVIPK MfYrQ9QAXezFxzUxbEoCI5PXOA44MODhT3095fyq+Uf3r2OB/gGKE8p3f2jv24nv RR/TR5S4y8FD+bWh12/BL8j4bv0weXFFUjwJwZmmpXnL3ev0oN92TaRrKRPuNO4Y GDmRV5qwUZrL2+e7j0bpXFGxulsxc+1JYxb8UY03BHIB2M8LnUTpsfpcxtSi1MYW N1U//fObXBfRl1CcdDPbT2cTJD9jwuozJm5l1p/BHOHu3cwhJTStH1XzsnKQXL9g O5izXWqwCgNmbG8egGR3ddV53ZGi1MsD7tGcc5GGcYnevdBi4l+Q4Zl+oFxjfHvs MKWMKygdaHUBqmYfOGgspA+S2zY38smbul8ZQUxP0yOl3+MyqCCedYQHi/w8MU+L k2w+NzXIWXBifA== =hVVT -----END PGP SIGNATURE----- Merge tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - rewrite of the HID-BPF internal implementation to use bpf struct_ops instead of a tracing endpoint (Benjamin Tissoires) - add two new HID-BPF hooks to be able to intercept userspace calls targeting a HID device and filtering them (Benjamin Tissoires) - add support for various new devices through HID-BPF filters (Benjamin Tissoires) - add support for the magic keyboard backlight (Orlando Chamberlain) - add the missing MODULE_DESCRIPTION() macros in HID drivers (Jeff Johnson) - use of kvzalloc in case memory gets too fragmented (Hailong Liu) - retrieve the device firmware node in the child HID device (Danny Kaehn) - some hid-uclogic improvements (José Expósito) - some more typos, trivial fixes, kernel doctext and unused functions cleanups * tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (60 commits) HID: hid-steam: Fix typo in goto label HID: mcp2221: Remove unnecessary semicolon HID: Fix spelling mistakes "Kensigton" -> "Kensington" HID: add more missing MODULE_DESCRIPTION() macros HID: samples: fix the 2 struct_ops definitions HID: fix for amples in for-6.11/bpf HID: apple: Add support for magic keyboard backlight on T2 Macs HID: bpf: Thrustmaster TCA Yoke Boeing joystick fix HID: bpf: Add Huion Dial 2 bpf fixup HID: bpf: Add support for the XP-PEN Deco Mini 4 HID: bpf: move the BIT() macro to hid_bpf_helpers.h HID: bpf: add a driver for the Huion Inspiroy 2S (H641P) HID: bpf: Add a HID report composition helper macros HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: fix gcc warning and unify __u64 into u64 selftests/hid: ensure CKI can compile our new tests on old kernels selftests/hid: add an infinite loop test for hid_bpf_try_input_report selftests/hid: add another test for injecting an event from an event hook HID: bpf: allow hid_device_event hooks to inject input reports on self ... |
||
|
Linus Torvalds
|
221fd1e154 |
IPMI: Small updates and fixes
Some cleanups for device changes coming, and some range checks on data coming from a host to a BMC. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmaWdSMACgkQYfOMkJGb /4Hn+A//QT1AcV7cA42vvaH7Ohm+bjmfCa8lzWk72VlbSB0+83wdt9J9yBvLmNDw Js4oRPt8eWft13+C/E7UlYuIEpLo6Vj3pGJ261hT3UteD3oIzZiF+fWzIFSYEjJz xvGnTiqsiXCunwEjBfXvXWaGL9KXMsnkIyzLWHvD5qCaQqki5IJBQ2Ky9OnjRhri sLITwdt+/aFDsPQuKaxZLkLs1GEdrR4q7pqVqyJvsaz/sV0t44rlf/kbcGIU8ow8 Mw53sRG1sN9tRGQvO1WUkkO63ZHu6BvhdflqWNEimS5/+vC/kQX6Dlfpd7CJU/QR 6M8maSIKq3w/YM7ieMsT7r+fJtYo5PE3MohjxCKaxPWJuNX+DJGOSiI/mXSe4hPM mGBpqmbUQKZVuOtd8cPxU0V8EGrhCNOfWnmzxV1JSobD0bcEqNEITQzwtMb/V4pi YJPdyUmfZnRXhhtO4Y5fD7Si3NR3BluiQB50LfV/YSBDb8VRsZoFWdW0uJxz+Z5Y g1gqXsDbt7i8YDiSd+7zYTmh1NOmjd9tDp6YwA+5yEvoYgM/uuXhYlOsqQXCPm1D jYV8fQaRWjsiocWH1HI4QJx4LRZG8FTXhvKufiQPsqZPqcezPp1nodONZhZk2xEf luYUT+TvtLKYdq7LJvvNJRrIiCLgw5Zxi76mi2+rkd97FYoshWM= =AnXj -----END PGP SIGNATURE----- Merge tag 'for-linus-6.11-1' of https://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "Some cleanups for device changes coming, and some range checks on data coming from a host to a BMC" * tag 'for-linus-6.11-1' of https://github.com/cminyard/linux-ipmi: ipmi: Drop explicit initialization of struct i2c_device_id::driver_data to 0 ipmi: ssif_bmc: prevent integer overflow on 32bit systems |
||
|
Linus Torvalds
|
a5cb6b2bbf |
platform-drivers-x86 for v6.11-1
Highlights: - amd/pmf: Report system state changes using existing input events - asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop keyboard RGB LED sysfs interface - dell-pc: Fan modes / platform profile support - hp-wmi: Fix platform profile switching on Omen/Victus laptops - intel/ISST: Use only TPMI interface when TPMI and legacy interfaces are available - intel/pmc: LTR restore support to pair with LTR ignore - intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU numbering mapping support - WMI: driver override support and docs improvements - lenovo-yoga-c630: Support for EC (platform/arm64) - platform/arm64: Fix build with COMPILE_TEST (broke after addition of C630) - tools: Intel Speed Select Turbo Ratio Limit fix - Miscellaneous cleanups / refactoring / improvements The following is an automated shortlog grouped by driver: amd/pmf: - Remove update system state document - Use existing input event codes to update system states - Use memdup_user() arm64: - add Lenovo Yoga C630 WOS EC driver - build drivers even on non-ARM64 platforms - EC_ACER_ASPIRE1 should depend on ARCH_QCOM - EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM arm64: lenovo-yoga-c630: - select AUXILIARY_BUS asus-tf103c-dock: - Use 2-argument strscpy() asus-wmi: - fix TUF laptop RGB variant - support the disable camera LED on F10 of Zenbook 2023 dell-pc: - avoid double free and invalid unregistration - Implement platform_profile dell-smbios: - Add helper for checking supported class - Move request functions for reuse Docs/admin-guide: - Remove pmf leftover reference from the index doc: TPMI: - Add entry for Performance Limit Reasons dt-bindings: platform: - Add Lenovo Yoga C630 EC hp: hp-bioscfg: - Use 2-argument strscpy() hp-wmi: - Fix implementation of the platform_profile_omen_get function - Fix platform profile option switch bug on Omen and Victus laptops ideapad-laptop: - use cleanup.h intel: chtwc_int33fe: - Use 2-argument strscpy() intel/ifs: - Switch to new Intel CPU model defines intel_ips: - Switch to new Intel CPU model defines intel/pmc: - Add support to show ltr_ignore value - Add support to undo ltr_ignore - Convert index variables to be unsigned - Move pmc assignment closer to first usage - Remove unneeded min_t check - Simplify mutex usage with cleanup helpers - Switch to new Intel CPU model defines - Use DEFINE_SHOW_STORE_ATTRIBUTE macro - Use the Elvis operator - Use the return value of pmc_core_send_msg intel_scu_wdt: - Switch to new Intel CPU model defines intel_speed_select_if: - Switch to new Intel CPU model defines intel_telemetry: - Switch to new Intel CPU model defines intel/tpmi: - Add API to get debugfs root - Add new auxiliary driver for performance limits - Add support for performance limit reasons intel: - TPMI domain id and CPU mapping intel/tpmi/plr: - Add support for the plr mailbox - Fix output in plr_print_bits() intel_turbo_max_3: - Switch to new Intel CPU model defines intel-uncore-freq: - Get rid of magic min_max argument - Get rid of magic values - Get rid of uncore_read_freq driver API - Re-arrange bit masks - Rename the sysfs helper macro names - Switch to new Intel CPU model defines - Use generic helpers for current frequency - Use uncore_index with read_control_freq ISST: - Add model specific loading for common module - Avoid some SkyLake server models - Use only TPMI interface when present p2sb: - Switch to new Intel CPU model defines serial-multi-instantiate: - Use 2-argument strscpy() think-lmi: - Use 2-argument strscpy() thinkpad_acpi: - Use 2-argument strscpy() tools/power/x86/intel-speed-select: - Set TRL MSR in 100 MHz units - v1.20 release wmi: - Add bus ABI documentation - Add driver_override support x86/platform/atom: - Switch to new Intel CPU model defines Merges: - Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo - Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo - Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo - Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZpZIdQAKCRBZrE9hU+XO MbIEAQCMVjDuOJSSuS2u7/iVb41Q3+kjP6X0CmSpf8dmt3rH0gD/Z9Qynw6ArRY4 PPHY25ur8kPtwtyxHfCMcar6ESpztwU= =L2LD -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - amd/pmf: Report system state changes using existing input events - asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop keyboard RGB LED sysfs interface - dell-pc: Fan modes / platform profile support - hp-wmi: Fix platform profile switching on Omen/Victus laptops - intel/ISST: Use only TPMI interface when TPMI and legacy interfaces are available - intel/pmc: LTR restore support to pair with LTR ignore - intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU numbering mapping support - WMI: driver override support and docs improvements - lenovo-yoga-c630: Support for EC (platform/arm64) - platform/arm64: Fix build with COMPILE_TEST (broke after addition of C630) - tools: Intel Speed Select Turbo Ratio Limit fix - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: asus-wmi: fix TUF laptop RGB variant platform/x86/intel/tpmi/plr: Fix output in plr_print_bits() Docs/admin-guide: Remove pmf leftover reference from the index platform/x86: ideapad-laptop: use cleanup.h platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM platform/x86/amd/pmf: Remove update system state document platform/x86/amd/pmf: Use existing input event codes to update system states platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops platform/x86:intel/pmc: Add support to undo ltr_ignore platform/x86:intel/pmc: Use the Elvis operator platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro platform/x86:intel/pmc: Remove unneeded min_t check platform/x86:intel/pmc: Add support to show ltr_ignore value platform/x86:intel/pmc: Move pmc assignment closer to first usage platform/x86:intel/pmc: Convert index variables to be unsigned platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers platform/x86:intel/pmc: Use the return value of pmc_core_send_msg tools/power/x86/intel-speed-select: v1.20 release ... |
||
Dave Airlie
|
478a52707b |
amd-drm-next-6.11-2024-07-12:
amdgpu: - RAS fixes - SMU fixes - GC 12 updates - SR-IOV fixes - IH 7 updates - DCC fixes - GC 11.5 fixes - DP MST fixes - GFX 9.4.4 fixes - SMU 14 updates - Documentation updates - MAINTAINERS updates - PSR SU fix - Misc small fixes -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZpFf9AAKCRC93/aFa7yZ 2H4lAP44+2MbaTiQr42ojyuE/CKybMP9km2yxoaEznIQXRT0PwD7BqVq7YEeCix2 ls2WNi6NA6/cO/aam7na/Q2NHzdBewI= =Blew -----END PGP SIGNATURE----- Merge tag 'amd-drm-next-6.11-2024-07-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.11-2024-07-12: amdgpu: - RAS fixes - SMU fixes - GC 12 updates - SR-IOV fixes - IH 7 updates - DCC fixes - GC 11.5 fixes - DP MST fixes - GFX 9.4.4 fixes - SMU 14 updates - Documentation updates - MAINTAINERS updates - PSR SU fix - Misc small fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712171637.2581787-1-alexander.deucher@amd.com |
||
Alex Deucher
|
e3615bd198 |
drm/amd/display: fix corruption with high refresh rates on DCN 3.0
This reverts commit |
||
Chen Hanxiao
|
cbd070a4ae |
ipvs: properly dereference pe in ip_vs_add_service
Use pe directly to resolve sparse warning:
net/netfilter/ipvs/ip_vs_ctl.c:1471:27: warning: dereference of noderef expression
Fixes:
|