There are ADCs that are differential but support to measure single-ended
signals on the same channels by connecting a constant voltage to the
negative input pin.
This property allows to properly define a single-ended channel that
requires two inputs to be specified. Software can use the presence of
this property to mark the channel as not differential.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-1-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Clean up by using a local variable struct device *dev. Also use
dev_err_probe where possible.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://patch.msgid.link/20240613114001.270233-2-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current error handling for calls such as devm_clk_get_enabled() in
the adi-axi-adc probe() function means that, if a property such as
'clocks' (for example) is not present in the devicetree when booting a
kernel with the driver enabled, the resulting error message will be
vague, e.g.:
|adi_axi_adc 44a00000.backend: probe with driver adi_axi_adc failed with error -2
Change the devm_clk_get_enabled(), devm_regmap_init_mmio(), and
devm_iio_backend_register() checks to use dev_err_probe() with some
context for easier debugging.
After the change:
|adi_axi_adc 44a00000.backend: error -ENOENT: failed to get clock
|adi_axi_adc 44a00000.backend: probe with driver adi_axi_adc failed with error -2
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240613163407.2147884-1-tgamblin@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As ft5426 seems to be compatible with this driver, add it.
Debug output during identification: Model "generic ft5x06 (79)", Rev. "
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20240501204758.758537-3-andreas@kemnade.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add compatible for ft5426.
Searches for documentation reveal neither edt nor evervision
as some related company, only FocalTech.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/20240501204758.758537-2-andreas@kemnade.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This not only includes rewording, but also where to put which emphasis
on terms in this document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Because Linux can be a target as well, add terminology to differentiate
between Linux being the target and Linux accessing targets.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
We now have the updated I2C specs and our own Code of Conduct, so we
have all we need to switch over to the inclusive terminology. Define
them here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fastest I2C mode is 5 MHz. Update the docs and reword the paragraph
slightly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Luckily, the specs are directly downloadable again, so update the link.
Also update its title to the original name "I²C".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Change the first paragraphs to contain only one space after the end of
the previous sentence like in the rest of the document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
With ARCH=i386, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/ali-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/ati-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/amd-k7-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/efficeon-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/nvidia-agp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/sworks-agp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes alpha-agp.c and parisc-agp.c which, although they did
not produce a warning with the i386 allmodconfig configuration, may
cause this warning with other configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Add a compatible for the EKTF2232, which is similar to other chips in this
document.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240621224022.1620897-3-andreas@kemnade.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
With ARCH=i386, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/video/console/mdacon.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes three other files which, although they did not produce a
warning with the i386 allmodconfig configuration, may cause this
warning with other configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The TI eQEP clock is both a functional and interface clock. Since it is
required for the device to function, we should be enabling it at probe.
Up to now, we've just been lucky that the clock was enabled by something
else on the system already.
Fixes: f213729f67 ("counter: new TI eQEP driver")
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240621-ti-eqep-enable-clock-v2-1-edd3421b54d4@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
- Don't accept TT entries for out-of-spec VIDs, by Sven Eckelmann
- Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only
callbacks", by Linus Lüssing
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmZ1kA8WHHN3QHNpbW9u
d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoYuHEACp9CIARf+NyyWYpoH7io4IsvpJ
foqM4byM4CCTnUiRHKeIxdx5zWL8TDMlDd+ydagjLSgVDjXMnmr5jMNmQTjDc9YR
0fOQNR0kdK3kPdxdAqb9CIzjHae7YBsbsFqvTBKTSAAaLWiZAJpI3xbQioSsmxSG
BHGQHy5gx7IJcTnPOqZ05tygF5/bvi8di6hKfV4kYhxicSRHMdPsgqxP1C0dMXmn
myz8EhPcvBSVfF4bV9lVA/NBNVLEUlbgoPwtjOu9zmdu+ebmIq5fhy5ezMhuDPA2
KlCYq1FqHsm8sT8XzoC35eS7i+kJBcG1lZwf3vMn/01AiBdUpMIBm8Tl92qkF3Ft
bvKkdMMzSuGlBMZf7fprNbjvmidi+/Fyl5kdrEOZTLkJJwbp4jR+FsLHTALDqWQB
6AskpPr41mp9p6bGIE6zK4cWBrjABBv1lJAIql0ApLX19OCRh4WOltWO3CF8PlZ1
j3JAJ7/jUgqRc637JTfuADKkZSyRlKGJJ15ltcdybrsHOGRUAmIQbcvk49JdJwjL
tSDxsfdLebVWbfoXpj5tg0C7ZECa0kHQ0dw6x7QdvGbPZxAduc15QrX6/PE7zOMx
zMI8+ZMxPELu7cpZ+fngy5qoMh6U47rskHSIclcJRZi1GrQhyRthfniBFPfCShww
vUsmFXflExZUjlaPYg==
=sCft
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20240621' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Don't accept TT entries for out-of-spec VIDs, by Sven Eckelmann
- Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only
callbacks", by Linus Lüssing
* tag 'batadv-net-pullrequest-20240621' of git://git.open-mesh.org/linux-merge:
Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks"
batman-adv: Don't accept TT entries for out-of-spec VIDs
====================
Link: https://patch.msgid.link/20240621143915.49137-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmZ1TY8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b+pXB/9fsvj/6jQtOAyGUHzKlWLGkfqh199P
ecWVL6/zCrAhS/CtE1VY97+6Khd9Ipmz7wXXE9IpuuIhMrfS0AkGy/9f30Kf59XL
PcehYmmOzNlpEPdqTVYbJGc9gOl1LNUTtTfAtJMilOY4NtvGGr02YT+frKsEKjYe
O/qrE6trjeAV3pHThZzqkVDDeTRP68XuMlx6W6NFduQOmCxB6bLluRMd5yqoV5G6
fLjRV5iwdB1qIU8Ny52NYGYrh0JfRqA97eLpMveTxG06/RCu7/zfAkdVJWfGf5ho
6PtRd7qqAh5uF2EZ5qXlzPc1FRyqFB8uhmavMetQ6g3F3UY6u0xSTVtF
=5bED
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-06-21
The first patch is by Oleksij Rempel, it enhances the error handling
for tightly received RTS message in the j1939 protocol.
Shigeru Yoshida's patch fixes a kernel information leak in
j1939_send_one() in the j1939 protocol.
Followed by a patch by Oleksij Rempel for the j1939 protocol, to
properly recover from a CAN bus error during BAM transmission.
A patch by Chen Ni properly propagates errors in the kvaser_usb
driver.
The last patch is by Vitor Soares, that fixes an infinite loop in the
mcp251xfd driver is SPI async sending fails during xmit.
* tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: fix infinite loop when xmit fails
can: kvaser_usb: fix return value for hif_usb_send_regout
net: can: j1939: recover socket queue on CAN bus error during BAM transmission
net: can: j1939: Initialize unused data in j1939_send_one()
net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
====================
Link: https://patch.msgid.link/20240621121739.434355-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmZ1MB4THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b+QQB/9wDkLdjgRsvI3c32IXxTrOmuX97Pm2
jYaHXmH1QkOKK0CXkPLEGjzpxSVXO6/d+ooeINkKmeF9VrtxxYWuE9pEsulyPz4y
dbeK5oAZdhtS6CEnArzbNHR6mdP1IcmJ3uKojsV71t+4GTdZw4WHe6LNgC4ua7n8
oYOpgbEV/YP/AyP8vO1L65M+tI69/0jeDpidtDQkNgWepE/Kh0W0ASfqjYrBgvZq
eycUmLTCigKNhG8fNJVHejyrnLynY2QBqwM7M5yYw1q8lX4W8Yf1y55VCqzPz63D
RiYVdVdG720jk9Ux9ZqxAKBPyzACnV6CG/MnzIgIdpV3O1aEf1WDkU2Y
=rRB9
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-06-21
The first 2 patches are by Andy Shevchenko, one cleans up the includes
in the mcp251x driver, the other one updates the sja100 plx_pci driver
to make use of predefines PCI subvendor ID.
Mans Rullgard's patch cleans up the Kconfig help text of for the slcan
driver.
Oliver Hartkopp provides a patch to update the documentation, which
removes the ISO 15675-2 specification version where possible.
The next 2 patches are by Harini T and update the documentation of the
xilinx_can driver.
Francesco Valla provides documentation for the ISO 15765-2 protocol.
A patch by Dr. David Alan Gilbert removes an unused struct from the
mscan driver.
12 patches are by Martin Jocic. The first three add support for 3 new
devices to the kvaser_usb driver. The remaining 9 first clean up the
kvaser_pciefd driver, and then add support for MSI.
Krzysztof Kozlowski contributes 3 patches simplifies the CAN SPI
drivers by making use of spi_get_device_match_data().
The last patch is by Martin Hundebøll, which reworks the m_can driver
to not enable the CAN transceiver during probe.
* tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (24 commits)
can: m_can: don't enable transceiver when probing
can: mcp251xfd: simplify with spi_get_device_match_data()
can: mcp251x: simplify with spi_get_device_match_data()
can: hi311x: simplify with spi_get_device_match_data()
can: kvaser_pciefd: Add MSI interrupts
can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR
can: kvaser_pciefd: Change name of return code variable
can: kvaser_pciefd: Rename board_irq to pci_irq
can: kvaser_pciefd: Add unlikely
can: kvaser_pciefd: Add inline
can: kvaser_pciefd: Remove unnecessary comment
can: kvaser_pciefd: Skip redundant NULL pointer check in ISR
can: kvaser_pciefd: Group #defines together
can: kvaser_usb: Add support for Kvaser Mini PCIe 1xCAN
can: kvaser_usb: Add support for Kvaser USBcan Pro 5xCAN
can: kvaser_usb: Add support for Vining 800
can: mscan: remove unused struct 'mscan_state'
Documentation: networking: document ISO 15765-2
can: xilinx_can: Document driver description to list all supported IPs
can: isotp: remove ISO 15675-2 specification version where possible
...
====================
Link: https://patch.msgid.link/20240621080201.305471-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure the inner IP header is part of the skb's linear data before
setting old_iph. Otherwise, on a non-linear skb, old_iph could point
outside of the packet data.
Unlike classical VXLAN, which always encapsulates Ethernet packets,
VXLAN-GPE can transport IP packets directly. In that case, we need to
look at skb->protocol to figure out if an Ethernet header is present.
Fixes: d342894c5d ("vxlan: virtual extensible lan")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/2aa75f6fa62ac9dbe4f16ad5ba75dd04a51d4b99.1718804000.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When either of these have a shorter version, like 1.8, the expression
that computes the version has a syntax error that can be seen in the
output of make:
expr: syntax error: missing argument after +
Link: https://bugs.gentoo.org/917559
Reported-by: Peter Volkov <peter.volkov@gmail.com>
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606153625.2255470-3-amadio@gentoo.org
Needed to add required include directories for the feature detection
to succeed. The header tracefs.h is installed either into the include
directory /usr/include/tracefs/tracefs.h when using the Makefile, or
into /usr/include/libtracefs/tracefs.h when using meson to build
libtracefs. The header tracefs.h uses #include <event-parse.h> from
libtraceevent, so pkg-config needs to pick the correct include directory
for libtracefs and add the one for libtraceevent to succeed.
Note that in baa2ca59ec the variable
LIBTRACEEVENT_DIR was introduced, and now the method to compile against
non-standard locations requires PKG_CONFIG_PATH to be set instead, which
works for both libtraceevent and libtracefs.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606153625.2255470-2-amadio@gentoo.org
mkdir /mnt/test/comp
f2fs_io setflags compression /mnt/test/comp
dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1
truncate --size 13 /mnt/test/comp/testfile
In the above scenario, we can get a BUG_ON.
kernel BUG at fs/f2fs/segment.c:3589!
Call Trace:
do_write_page+0x78/0x390 [f2fs]
f2fs_outplace_write_data+0x62/0xb0 [f2fs]
f2fs_do_write_data_page+0x275/0x740 [f2fs]
f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs]
f2fs_write_multi_pages+0x1e5/0xae0 [f2fs]
f2fs_write_cache_pages+0xab1/0xc60 [f2fs]
f2fs_write_data_pages+0x2d8/0x330 [f2fs]
do_writepages+0xcf/0x270
__writeback_single_inode+0x44/0x350
writeback_sb_inodes+0x242/0x530
__writeback_inodes_wb+0x54/0xf0
wb_writeback+0x192/0x310
wb_workfn+0x30d/0x400
The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the
page was set the gcing flag by set_cluster_dirty().
Cc: stable@vger.kernel.org
Fixes: 4961acdd65 ("f2fs: fix to tag gcing flag on page during block migration")
Reviewed-by: Chao Yu <chao@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add vDSO implementations for gettimeofday(), clock_gettime() and
clock_gettime64() kernel syscalls.
Currently those functions are implemented as pure syscall wrappers.
Signed-off-by: Helge Deller <deller@gmx.de>
Clean up the internal unistd.h file, so that syscallX() can be used
internally to call syscalls from userspace. This is used later by the
vDSO C-code.
Signed-off-by: Helge Deller <deller@gmx.de>
A dying worker is first moved from pool->workers to pool->dying_workers
in set_worker_dying() and removed from pool->dying_workers in
detach_dying_workers(). The whole procedure is in the some lock context
of wq_pool_attach_mutex.
So pool->dying_workers is useless, just remove it and keep the dying
worker in pool->workers after set_worker_dying() and remove it in
detach_dying_workers() with wq_pool_attach_mutex held.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The code to kick off the destruction of workers is now in a process
context (idle_cull_fn()), and the detaching of a worker is not required
to be inside the worker thread now, so just do the detaching directly
in idle_cull_fn().
wake_dying_workers() is renamed to detach_dying_workers() and the unneeded
wakeup in wake_dying_workers() is also removed.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
So that when the rescuer is woken up next time, it will not interrupt
the last working cpu which might be busy on other crucial works but
have nothing to do with the rescuer's incoming works.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The code to kick off the destruction of workers is now in a process
context (idle_cull_fn()), so kthread_stop() can be used in the process
context to replace the work of pool->detach_completion.
The wakeup in wake_dying_workers() is unneeded after this change, but it
is harmless, jut keep it here until next patch renames wake_dying_workers()
rather than renaming it again and again.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add handling of HSYNC signal emitted by the TI ADS7846 if it is hooked
up to a GPIO.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240430-gpio-leds-miscarm-v1-3-9c94d7711f6c@linaro.org
[dtor: dropped Spitz changes, kept platform data wait_for_sync option]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The TI ADS7846 emits a horizontal sync signal that is usually
connected to a GPIO for polling. Add a binding for this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240430-gpio-leds-miscarm-v1-2-9c94d7711f6c@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Alan Maguire says:
====================
bpf: resilient split BTF followups
Follow-up to resilient split BTF series [1],
- cleaning up libbpf relocation code (patch 1);
- adding 'struct module' support for base BTF data (patch 2);
- splitting out field iteration code into separate file (patch 3);
- sharing libbpf relocation code with the kernel (patch 4);
- adding a kbuild --btf_features flag to generate distilled base
BTF in the module-specific case where KBUILD_EXTMOD is true
(patch 5); and
- adding test coverage for module-based kfunc dtor (patch 6)
Generation of distilled base BTF for modules requires the pahole patch
at [2], but without it we just won't get distilled base BTF (and thus BTF
relocation on module load) for bpf_testmod.ko.
Changes since v1 [3]:
- fixed line lengths and made comparison an explicit == 0 (Andrii, patch 1)
- moved btf_iter.c changes to separate patch (Andrii, patch 3)
- grouped common targets in kernel/bpf/Makefile (Andrii, patch 4)
- updated bpf_testmod ctx alloc to use GFP_ATOMIC, and updated dtor
selftest to use map-based dtor cleanup (Eduard, patch 6)
[1] https://lore.kernel.org/bpf/20240613095014.357981-1-alan.maguire@oracle.com/
[2] https://lore.kernel.org/bpf/20240517102714.4072080-1-alan.maguire@oracle.com/
[3] https://lore.kernel.org/bpf/20240618162449.809994-1-alan.maguire@oracle.com/
====================
Link: https://lore.kernel.org/r/20240620091733.1967885-1-alan.maguire@oracle.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
add simple kfuncs to create/destroy a context type to bpf_testmod,
register them and add a kfunc_call test to use them. This provides
test coverage for registration of dtor kfuncs from modules.
By transferring the context pointer to a map value as a __kptr
we also trigger the map-based dtor cleanup logic, improving test
coverage.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-7-alan.maguire@oracle.com
Support creation of module BTF along with distilled base BTF;
the latter is stored in a .BTF.base ELF section and supplements
split BTF references to base BTF with information about base types,
allowing for later relocation of split BTF with a (possibly
changed) base. resolve_btfids detects the presence of a .BTF.base
section and will use it instead of the base BTF it is passed in
BTF id resolution.
Modules will be built with a distilled .BTF.base section for external
module build, i.e.
make -C. -M=path2/module
...while in-tree module build as part of a normal kernel build will
not generate distilled base BTF; this is because in-tree modules
change with the kernel and do not require BTF relocation for the
running vmlinux.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-6-alan.maguire@oracle.com
Share relocation implementation with the kernel. As part of this,
we also need the type/string iteration functions so also share
btf_iter.c file. Relocation code in kernel and userspace is identical
save for the impementation of the reparenting of split BTF to the
relocated base BTF and retrieval of the BTF header from "struct btf";
these small functions need separate user-space and kernel implementations
for the separate "struct btf"s they operate upon.
One other wrinkle on the kernel side is we have to map .BTF.ids in
modules as they were generated with the type ids used at BTF encoding
time. btf_relocate() optionally returns an array mapping from old BTF
ids to relocated ids, so we use that to fix up these references where
needed for kfuncs.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-5-alan.maguire@oracle.com
This will allow it to be shared with the kernel. No functional change.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-4-alan.maguire@oracle.com
...as this will allow split BTF modules with a base BTF
representation (rather than the full vmlinux BTF at time of
BTF encoding) to resolve their references to kernel types in a
way that is more resilient to small changes in kernel types.
This will allow modules that are not built every time the kernel
is to provide more resilient BTF, rather than have it invalidated
every time BTF ids for core kernel types change.
Fields are ordered to avoid holes in struct module.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-3-alan.maguire@oracle.com
Use less verbose names in BTF relocation code and fix off-by-one error
and typo in btf_relocate.c. Simplify loop over matching distilled
types, moving from assigning a _next value in loop body to moving
match check conditions into the guard.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-2-alan.maguire@oracle.com
Adding selftest to verify that struct_ops maps are auto attached by
bpf skeleton's `*__attach` function.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240621180324.238379-1-yatsenko@meta.com
On ARM64, the pointer to task_struct is always available in the sp_el0
register and therefore the calls to bpf_get_current_task() and
bpf_get_current_task_btf() can be inlined into a single MRS instruction.
Here is the difference before and after this change:
Before:
; struct task_struct *task = bpf_get_current_task_btf();
54: mov x10, #0xffffffffffff7978 // #-34440
58: movk x10, #0x802b, lsl #16
5c: movk x10, #0x8000, lsl #32
60: blr x10 --------------> 0xffff8000802b7978 <+0>: mrs x0, sp_el0
64: add x7, x0, #0x0 <-------------- 0xffff8000802b797c <+4>: ret
After:
; struct task_struct *task = bpf_get_current_task_btf();
54: mrs x7, sp_el0
This shows around 1% performance improvement in artificial microbenchmark.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240619131334.4297-1-puranjay@kernel.org
Two fixes: one in the ufs driver fixing an obvious memory leak and the
other (with a core flag based update) trying to prevent USB crashes by
stopping the core from issuing a request for the I/O Hints mode page.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZnXk0iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXORAQCgNcf9
vxSCOJNDU+OJlBOZLAzylHJEAYRnK7MPNg7ucgD/b8D4ANGbbHz4gLIdC/1BPFwi
ZWmQwuClTmBJfCs6jSA=
=07Uv
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes: one in the ufs driver fixing an obvious memory leak and the
other (with a core flag based update) trying to prevent USB crashes by
stopping the core from issuing a request for the I/O Hints mode page"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for USB/UAS devices
scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag
scsi: ufs: core: Free memory allocated for model before reinit
