Add counter information necessary for optimizing event grouping the
perf tool.
The most recent RFC patch set using this information:
https://lore.kernel.org/lkml/20240412210756.309828-1-weilin.wang@intel.com/
The information was added in:
475892a969
and later patches.
Co-authored-by: Weilin Wang <weilin.wang@intel.com>
Co-authored-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620181752.3945845-4-irogers@google.com
Update events from v1.24 to v1.27.
Update e-core TMA metrics to v3.6.
Bring in the event updates v1.27:
ea4f309a04
v1.26:
0052e68d24
The e-core TMA 3.6 information was updated in:
d9c2faa70b
New events are:
MEM_UOPS_RETIRED.LOCK_LOADS,
SERIALIZATION.C01_MS_SCB,
UOPS_ISSUED.ANY.
Co-authored-by: Weilin Wang <weilin.wang@intel.com>
Co-authored-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620181752.3945845-3-irogers@google.com
Update events from v1.24 to v1.27.
Update p-core TMA metrics from v4.7 to v4.8, and the e-core TMA
metrics to v3.6.
Bring in the event updates v1.27:
ea4f309a04
v1.26:
0052e68d24
The p-core TMA 4.8 information was updated in:
59194d4d90
And e-core in:
d9c2faa70b
New events are:
EXE_ACTIVITY.2_3_PORTS_UTIL,
ICACHE_DATA.STALL_PERIODS,
L2_TRANS.L2_WB,
MEM_TRANS_RETIRED.LOAD_LATENCY_GT_1024,
MEM_UOPS_RETIRED.LOCK_LOADS,
OFFCORE_REQUESTS.DEMAND_CODE_RD,
OFFCORE_REQUESTS.DEMAND_RFO,
OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_CODE_RD,
OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD,
RS.EMPTY_RESOURCE,
SERIALIZATION.C01_MS_SCB,
SW_PREFETCH_ACCESS.ANY,
UOPS_ISSUED.ANY,
UOPS_ISSUED.CYCLES
Co-authored-by: Weilin Wang <weilin.wang@intel.com>
Co-authored-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620181752.3945845-2-irogers@google.com
Add a perf man page document that describes how to exploit AMD IBS with
Linux perf. Brief intro about IBS and simple one-liner examples will help
naive users to get started. This is not meant to be an exhaustive IBS
guide. User should refer latest AMD64 Architecture Programmer's Manual
for detailed description of IBS.
Usage:
$ man perf-amd-ibs
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: ananth.narayan@amd.com
Cc: sandipan.das@amd.com
Cc: santosh.shukla@amd.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240620054104.815-1-ravi.bangoria@amd.com
Currently 'make W=1' reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/unicode/utf8data.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/unicode/utf8-selftest.o
Add a MODULE_DESCRIPTION() to utf8-selftest.c and utf8data.c_shipped,
and update mkutf8data.c to add a MODULE_DESCRIPTION() to any future
generated utf8data file.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240524-md-unicode-v1-1-e2727ce8574d@quicinc.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
The variables failed_tests and total_tests are not used outside of the
utf8-selftest.c file so make them static to avoid the following warnings:
fs/unicode/utf8-selftest.c:17:14: warning: symbol 'failed_tests' was not declared. Should it be static?
fs/unicode/utf8-selftest.c:18:14: warning: symbol 'total_tests' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20240308183215.1924331-1-ben.dooks@codethink.co.uk
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Setting IACK bit when core is disabled does not clear the "Interrupt Flag"
bit in the status register, and the interrupt remains pending.
Sometimes it causes failure for the very first message transfer, that is
usually a device probe.
Hence, set IACK bit after core is enabled to clear pending interrupt.
Fixes: 18f98b1e31 ("[PATCH] i2c: New bus driver for the OpenCores I2C controller")
Signed-off-by: Grygorii Tertychnyi <grygorii.tertychnyi@leica-geosystems.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 1acd4577a6 ("dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 7ea75dd386 ("dt-bindings: i2c: convert i2c-at91 to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pass fault->gfn into kvm_tdp_mmu_fast_pf_get_last_sptep(), instead of
passing fault->addr and then converting it to a GFN.
Future changes will make fault->addr and fault->gfn differ when running
TDX guests. The GFN will be conceptually the same as it is for normal VMs,
but fault->addr may contain a TDX specific bit that differentiates between
"shared" and "private" memory. This bit will be used to direct faults to
be handled on different roots, either the normal "direct" root or a new
type of root that handles private memory. The TDP iterators will process
the traditional GFN concept and apply the required TDX specifics depending
on the root type. For this reason, it needs to operate on regular GFN and
not the addr, which may contain these special TDX specific bits.
Today kvm_tdp_mmu_fast_pf_get_last_sptep() takes fault->addr and then
immediately converts it to a GFN with a bit shift. However, this would
unfortunately retain the TDX specific bits in what is supposed to be a
traditional GFN. Excluding TDX's needs, it is also is unnecessary to pass
fault->addr and convert it to a GFN when the GFN is already on hand.
So instead just pass the GFN into kvm_tdp_mmu_fast_pf_get_last_sptep() and
use it directly.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240619223614.290657-9-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename REMOVED_SPTE to FROZEN_SPTE so that it can be used for other
multi-part operations.
REMOVED_SPTE is used as a non-present intermediate value for multi-part
operations that can happen when a thread doesn't have an MMU write lock.
Today these operations are when removing PTEs.
However, future changes will want to use the same concept for setting a
PTE. In that case the REMOVED_SPTE name does not quite fit. So rename it
to FROZEN_SPTE so it can be used for both types of operations.
Also rename the relevant helpers and comments that refer to "removed"
within the context of the SPTE value. Take care to not update naming
referring the "remove" operations, which are still distinct.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240619223614.290657-2-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than acquiring and dropping the VM / BO dma-resv around
xe_vma_create and do the same thing upon adding preempt fences or an
error, hold these locks through the entire new_vma() function.
v2:
- Rebase (CI)
Cc: Fei Yang <fei.yang@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618003859.3239239-1-matthew.brost@intel.com
Rather than checking for pending enable and asserting runnable_state ==
1 in sched done handler, invert these. This is more robust code taking
action based on the G2H message and asserting KMD tracking state is
correct.
Suggested-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614061343.2931649-1-matthew.brost@intel.com
- Fix dangling references to a redistributor region if
the vgic was prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that
both parties can make forward progress.
-----BEGIN PGP SIGNATURE-----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=rnyP
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.10, take #2
- Fix dangling references to a redistributor region if
the vgic was prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that
both parties can make forward progress.
The TDP MMU function __tdp_mmu_set_spte_atomic uses a cmpxchg64 to replace
the SPTE value and returns -EBUSY on failure. The caller must check the
return value and retry. Add __must_check to it, as well as to two more
functions that forward the return value of __tdp_mmu_set_spte_atomic to
their caller.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-Id: <8f7d5a1b241bf5351eaab828d1a1efe5c17699ca.1705965635.git.isaku.yamahata@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_gmem_populate() is a potentially lengthy operation that can involve
multiple calls to the firmware. Interrupt it if a signal arrives.
Fixes: 1f6c06b177 ("KVM: guest_memfd: Add interface for populating gmem pages with user data")
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Cc: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function kvm_reset_dirty_gfn may be called with parameters cur_slot /
cur_offset / mask are all zero, it does not represent real dirty page.
It is not necessary to clear dirty page in this condition. Also return
value of macro __fls() is undefined if mask is zero which is called in
funciton kvm_reset_dirty_gfn(). Here just return.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240613122803.1031511-1-maobibo@loongson.cn>
[Move the conditional inside kvm_reset_dirty_gfn; suggested by
Sean Christopherson. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support to set block layer request_queue atomic write limits. The
limits will be derived from either the namespace or controller atomic
parameters.
NVMe atomic-related parameters are grouped into "normal" and "power-fail"
(or PF) class of parameter. For atomic write support, only PF parameters
are of interest. The "normal" parameters are concerned with racing reads
and writes (which also applies to PF). See NVM Command Set Specification
Revision 1.0d section 2.1.4 for reference.
Whether to use per namespace or controller atomic parameters is decided by
NSFEAT bit 1 - see Figure 97: Identify – Identify Namespace Data
Structure, NVM Command Set.
NVMe namespaces may define an atomic boundary, whereby no atomic guarantees
are provided for a write which straddles this per-lba space boundary. The
block layer merging policy is such that no merges may occur in which the
resultant request would straddle such a boundary.
Unlike SCSI, NVMe specifies no granularity or alignment rules, apart from
atomic boundary rule. In addition, again unlike SCSI, there is no
dedicated atomic write command - a write which adheres to the atomic size
limit and boundary is implicitly atomic.
If NSFEAT bit 1 is set, the following parameters are of interest:
- NAWUPF (Namespace Atomic Write Unit Power Fail)
- NABSPF (Namespace Atomic Boundary Size Power Fail)
- NABO (Namespace Atomic Boundary Offset)
and we set request_queue limits as follows:
- atomic_write_unit_max = rounddown_pow_of_two(NAWUPF)
- atomic_write_max_bytes = NAWUPF
- atomic_write_boundary = NABSPF
If in the unlikely scenario that NABO is non-zero, then atomic writes will
not be supported at all as dealing with this adds extra complexity. This
policy may change in future.
In all cases, atomic_write_unit_min is set to the logical block size.
If NSFEAT bit 1 is unset, the following parameter is of interest:
- AWUPF (Atomic Write Unit Power Fail)
and we set request_queue limits as follows:
- atomic_write_unit_max = rounddown_pow_of_two(AWUPF)
- atomic_write_max_bytes = AWUPF
- atomic_write_boundary = 0
A new function, nvme_valid_atomic_write(), is also called from submission
path to verify that a request has been submitted to the driver will
actually be executed atomically. As mentioned, there is no dedicated NVMe
atomic write command (which may error for a command which exceeds the
controller atomic write limits).
Note on NABSPF:
There seems to be some vagueness in the spec as to whether NABSPF applies
for NSFEAT bit 1 being unset. Figure 97 does not explicitly mention NABSPF
and how it is affected by bit 1. However Figure 4 does tell to check Figure
97 for info about per-namespace parameters, which NABSPF is, so it is
implied. However currently nvme_update_disk_info() does check namespace
parameter NABO regardless of this bit.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
jpg: total rewrite
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240620125359.2684798-11-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add initial support for atomic writes.
As is standard method, feed device properties via modules param, those
being:
- atomic_max_size_blks
- atomic_alignment_blks
- atomic_granularity_blks
- atomic_max_size_with_boundary_blks
- atomic_max_boundary_blks
These just match sbc4r22 section 6.6.4 - Block limits VPD page.
We just support ATOMIC WRITE (16).
The major change in the driver is how we lock the device for RW accesses.
Currently the driver uses a per-device lock for accessing device metadata
and "media" data (calls to do_device_access()) atomically for the duration
of the whole read/write command.
This should not suit verifying atomic writes. Reason being that currently
all reads/writes are atomic, so using atomic writes does not prove
anything.
Change device access model to basis that regular writes only atomic on a
per-sector basis, while reads and atomic writes are fully atomic.
As mentioned, since accessing metadata and device media is atomic,
continue to have regular writes involving metadata - like discard or PI -
as atomic. We can improve this later.
Currently we only support model where overlapping going reads or writes
wait for current access to complete before commencing an atomic write.
This is described in 4.29.3.2 section of the SBC. However, we simplify,
things and wait for all accesses to complete (when issuing an atomic
write).
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-10-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support is divided into two main areas:
- reading VPD pages and setting sdev request_queue limits
- support WRITE ATOMIC (16) command and tracing
The relevant block limits VPD page need to be read to allow the block layer
request_queue atomic write limits to be set. These VPD page limits are
described in sbc4r22 section 6.6.4 - Block limits VPD page.
There are five limits of interest:
- MAXIMUM ATOMIC TRANSFER LENGTH
- ATOMIC ALIGNMENT
- ATOMIC TRANSFER LENGTH GRANULARITY
- MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY
- MAXIMUM ATOMIC BOUNDARY SIZE
MAXIMUM ATOMIC TRANSFER LENGTH is the maximum length for a WRITE ATOMIC
(16) command. It will not be greater than the device MAXIMUM TRANSFER
LENGTH.
ATOMIC ALIGNMENT and ATOMIC TRANSFER LENGTH GRANULARITY are the minimum
alignment and length values for an atomic write in terms of logical blocks.
Unlike NVMe, SCSI does not specify an LBA space boundary, but does specify
a per-IO boundary granularity. The maximum boundary size is specified in
MAXIMUM ATOMIC BOUNDARY SIZE. When used, this boundary value is set in the
WRITE ATOMIC (16) ATOMIC BOUNDARY field - layout for the WRITE_ATOMIC_16
command can be found in sbc4r22 section 5.48. This boundary value is the
granularity size at which the device may atomically write the data. A value
of zero in WRITE ATOMIC (16) ATOMIC BOUNDARY field means that all data must
be atomically written together.
MAXIMUM ATOMIC TRANSFER LENGTH WITH BOUNDARY is the maximum atomic write
length if a non-zero boundary value is set.
For atomic write support, the WRITE ATOMIC (16) boundary is not of much
interest, as the block layer expects each request submitted to be executed
atomically. However, the SCSI spec does leave itself open to a quirky
scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero, yet MAXIMUM ATOMIC
TRANSFER LENGTH WITH BOUNDARY and MAXIMUM ATOMIC BOUNDARY SIZE are both
non-zero. This case will be supported.
To set the block layer request_queue atomic write capabilities, sanitize
the VPD page limits and set limits as follows:
- atomic_write_unit_min is derived from granularity and alignment values.
If no granularity value is not set, use physical block size
- atomic_write_unit_max is derived from MAXIMUM ATOMIC TRANSFER LENGTH. In
the scenario where MAXIMUM ATOMIC TRANSFER LENGTH is zero and boundary
limits are non-zero, use MAXIMUM ATOMIC BOUNDARY SIZE for
atomic_write_unit_max. New flag scsi_disk.use_atomic_write_boundary is
set for this scenario.
- atomic_write_boundary_bytes is set to zero always
SCSI also supports a WRITE ATOMIC (32) command, which is for type 2
protection enabled. This is not going to be supported now, so check for
T10_PI_TYPE2_PROTECTION when setting any request_queue limits.
To handle an atomic write request, add support for WRITE ATOMIC (16)
command in handler sd_setup_atomic_cmnd(). Flag use_atomic_write_boundary
is checked here for encoding ATOMIC BOUNDARY field.
Trace info is also added for WRITE_ATOMIC_16 command.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-9-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support atomic writes by submitting a single BIO with the REQ_ATOMIC set.
It must be ensured that the atomic write adheres to its rules, like
naturally aligned offset, so call blkdev_dio_invalid() ->
blkdev_atomic_write_valid() [with renaming blkdev_dio_unaligned() to
blkdev_dio_invalid()] for this purpose. The BIO submission path currently
checks for atomic writes which are too large, so no need to check here.
In blkdev_direct_IO(), if the nr_pages exceeds BIO_MAX_VECS, then we cannot
produce a single BIO, so error in this case.
Finally set FMODE_CAN_ATOMIC_WRITE when the bdev can support atomic writes
and the associated file flag is for O_DIRECT.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-8-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend statx system call to return additional info for atomic write support
support if the specified file is a block device.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-7-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add atomic write support, as follows:
- add helper functions to get request_queue atomic write limits
- report request_queue atomic write support limits to sysfs and update Doc
- support to safely merge atomic writes
- deal with splitting atomic writes
- misc helper functions
- add a per-request atomic write flag
New request_queue limits are added, as follows:
- atomic_write_hw_max is set by the block driver and is the maximum length
of an atomic write which the device may support. It is not
necessarily a power-of-2.
- atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and
max_hw_sectors. It is always a power-of-2. Atomic writes may be merged,
and atomic_write_max_sectors would be the limit on a merged atomic write
request size. This value is not capped at max_sectors, as the value in
max_sectors can be controlled from userspace, and it would only cause
trouble if userspace could limit atomic_write_unit_max_bytes and the
other atomic write limits.
- atomic_write_hw_unit_{min,max} are set by the block driver and are the
min/max length of an atomic write unit which the device may support. They
both must be a power-of-2. Typically atomic_write_hw_unit_max will hold
the same value as atomic_write_hw_max.
- atomic_write_unit_{min,max} are derived from
atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits.
Both min and max values must be a power-of-2.
- atomic_write_hw_boundary is set by the block driver. If non-zero, it
indicates an LBA space boundary at which an atomic write straddles no
longer is atomically executed by the disk. The value must be a
power-of-2. Note that it would be acceptable to enforce a rule that
atomic_write_hw_boundary_sectors is a multiple of
atomic_write_hw_unit_max, but the resultant code would be more
complicated.
All atomic writes limits are by default set 0 to indicate no atomic write
support. Even though it is assumed by Linux that a logical block can always
be atomically written, we ignore this as it is not of particular interest.
Stacked devices are just not supported either for now.
An atomic write must always be submitted to the block driver as part of a
single request. As such, only a single BIO must be submitted to the block
layer for an atomic write. When a single atomic write BIO is submitted, it
cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited
by the maximum guaranteed BIO size which will not be required to be split.
This max size is calculated by request_queue max segments and the number
of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace
issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each
segment containing PAGE_SIZE of data, apart from the first+last, which each
can fit logical block size of data. The first+last will be LBS
length/aligned as we rely on direct IO alignment rules also.
New sysfs files are added to report the following atomic write limits:
- atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in
bytes
- atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in
bytes
- atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in
bytes
- atomic_write_max_bytes - same as atomic_write_max_sectors in bytes
Atomic writes may only be merged with other atomic writes and only under
the following conditions:
- total resultant request length <= atomic_write_max_bytes
- the merged write does not straddle a boundary
Helper function bdev_can_atomic_write() is added to indicate whether
atomic writes may be issued to a bdev. If a bdev is a partition, the
partition start must be aligned with both atomic_write_unit_min_sectors
and atomic_write_hw_boundary_sectors.
FSes will rely on the block layer to validate that an atomic write BIO
submitted will be of valid size, so add blk_validate_atomic_write_op_size()
for this purpose. Userspace expects an atomic write which is of invalid
size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use
BLK_STS_INVAL for when a BIO needs to be split, as this should mean an
invalid size BIO.
Flag REQ_ATOMIC is used for indicating an atomic write.
Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend statx system call to return additional info for atomic write support
support for a file.
Helper function generic_fill_statx_atomic_writes() can be used by FSes to
fill in the relevant statx fields. For now atomic_write_segments_max will
always be 1, otherwise some rules would need to be imposed on iovec length
and alignment, which we don't want now.
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
jpg: relocate bdev support to another patch
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-5-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An atomic write is a write issued with torn-write protection, meaning
that for a power failure or any other hardware failure, all or none of the
data from the write will be stored, but never a mix of old and new data.
Userspace may add flag RWF_ATOMIC to pwritev2() to indicate that the
write is to be issued with torn-write prevention, according to special
alignment and length rules.
For any syscall interface utilizing struct iocb, add IOCB_ATOMIC for
iocb->ki_flags field to indicate the same.
A call to statx will give the relevant atomic write info for a file:
- atomic_write_unit_min
- atomic_write_unit_max
- atomic_write_segments_max
Both min and max values must be a power-of-2.
Applications can avail of atomic write feature by ensuring that the total
length of a write is a power-of-2 in size and also sized between
atomic_write_unit_min and atomic_write_unit_max, inclusive. Applications
must ensure that the write is at a naturally-aligned offset in the file
wrt the total write length. The value in atomic_write_segments_max
indicates the upper limit for IOV_ITER iovcnt.
Add file mode flag FMODE_CAN_ATOMIC_WRITE, so files which do not have the
flag set will have RWF_ATOMIC rejected and not just ignored.
Add a type argument to kiocb_set_rw_flags() to allows reads which have
RWF_ATOMIC set to be rejected.
Helper function generic_atomic_write_valid() can be used by FSes to verify
compliant writes. There we check for iov_iter type is for ubuf, which
implies iovcnt==1 for pwritev2(), which is an initial restriction for
atomic_write_segments_max. Initially the only user will be bdev file
operations write handler. We will rely on the block BIO submission path to
ensure write sizes are compliant for the bdev, so we don't need to check
atomic writes sizes yet.
Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com>
jpg: merge into single patch and much rewrite
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The purpose of the chunk_sectors limit is to ensure that a mergeble request
fits within the boundary of the chunck_sector value.
Such a feature will be useful for other request_queue boundary limits, so
generalize the chunk_sectors merge code.
This idea was proposed by Hannes Reinecke.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blk_queue_get_max_sectors() is passed a enum req_op. In future
the value returned from blk_queue_get_max_sectors() may depend on certain
request flags, so pass a request pointer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ddc-i2c-bus property should be placed in connector node,
mark the HDMI TX side property as deprecated.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522000949.49530-1-marex@denx.de
The DW HDMI driver core is responsible for parsing the 'ddc-i2c-bus' property,
move the property description into the DW HDMI common DT schema too, so this
property can be used on all devices integrating the DW HDMI core.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515062753.111746-1-marex@denx.de
If kvm_gmem_get_pfn() detects an hwpoisoned page, it returns -EHWPOISON
but it does not put back the reference that kvm_gmem_get_folio() had
grabbed. Add the forgotten folio_put().
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Cc: stable@vger.kernel.org
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we return the value from invoke_psci_fn() directly as return
value from psci_system_suspend(). It is wrong to send the PSCI interface
return value directly. psci_to_linux_errno() provide the mapping from
PSCI return value to the one that can be returned to the callers within
the kernel.
Use psci_to_linux_errno() to convert and return the correct value from
psci_system_suspend().
Fixes: faf7ec4a92 ("drivers: firmware: psci: add system suspend support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240515095528.1949992-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just one minor fix to disable write protect for milkv-duo because it
does not have write-protect pin.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
-----BEGIN PGP SIGNATURE-----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=0f/P
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=A3n/
-----END PGP SIGNATURE-----
Merge tag 'riscv-sophgo-dt-fixes-for-v6.10-rc4' of https://github.com/sophgo/linux into arm/fixes
RISC-V Sophgo Devicetree fixes for v6.10-rc4
Just one minor fix to disable write protect for milkv-duo because it
does not have write-protect pin.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-fixes-for-v6.10-rc4' of https://github.com/sophgo/linux:
riscv: dts: sophgo: disable write-protection for milkv duo
Link: https://lore.kernel.org/r/MA0P287MB28226E34D9390B311201B7C4FECF2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
the SOM dtsi.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmZvsOEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5gAAf/dv5/cYTuA8MRKAM9Zf0Mf+FKGTDa
/kgfsMz/zkSUke54ZI9clo9laoTyhucPjPu6mUJ7AkbsMiptUQ3fiV1mM+TWuQLV
inlg5qUDvD6JFTiR1Dkm5ML0kyiqbRV6/bHGSCT/tmsqj14xZRgWgavh2e4UKavs
upY1Rj1jaxjc+bycSW9IBTdPvpbNGDgEmBw1YkJysrqnRK3YSOU1QD/xYFKyEtJh
X9gyYc8dmTmuNw3P8Go7T0ABQfYSz/m1hyZEEXWq6rx7xm11LtW+/TnNTcRXxtNM
2WA/DBbCSlaUafZ2zwavb4l+ibr80VlVEechzEJxfrf5Df6Kq8Sv+Qh9eg==
=GHYs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmZ0l9gACgkQYKtH/8kJ
Uifh1Q//e/X01f/4fhzWRg3+wnIstJjtcjmZHsYA4YWMs7/1VFYthlpsOCb7RG9z
thFLeif8EpOi+N0luwLob1XeaQDddVktF5PwerPFnY9JE7u3U0w4jvE7D++MUTHQ
JI4iuqVcFiqOgbcGKrRnVF3/iRQO7wT/QP+bRFypLleUI4VY/imyR9Wrc1BsRXnf
ruO7xcu5x7uR8E5lvI8/LDkjux8MAqyIICBRK4Bs2vsQ1yiPdm84TzeNWDUvTqbe
qXdgqw26pVhMm5U4qYwWXqqkO50Tmsk8RKyi6ZEU5WgGXgRHgaBUlDB7rKZunZuM
Z10F/vCeb3Qz4XD+6LI+1yRLclGHP+pyOLCXLC/rIsbcGrBFiF3vrjT5CK6nQoFz
Km7feswlNdZEXry2gs5gPlOvwDcNw1KDyCWAHi9cdb3MJgM3YtimaPA0j9fhsdY6
W9s2LpOID9BshzoQePaLPsQumHEe2LzPpJeUbHHqEmgTxTEW8hwr3WwkbI7AUtoJ
wfMkpMX40IsZpV82LAvkEIhsFcmMXshMmnfEVkw+Up80zTIe+wqKyool/ACtX3Wl
ANL+eetLrsNXhHyZQ5CMpn9lIavNFdoe5ab/O2mcaduKBRXLUpdrzE6dtsUz/aML
lrfHHALcAkYNvXgFVA6hEMswDWkHgQHUrtzgnHaD307hIj4Oj0U=
=okOh
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.10:
- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
the SOM dtsi.
* tag 'imx-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
Link: https://lore.kernel.org/r/Zm+xVUmFtaOnYBb4@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Due to personal reasons, I can't maintain T-Head SoCs any more. At the
same time, I would nominate Drew Fustini as Maintainer. Drew contributed
the sdhci support of TH1520 in the past, and is working on the clk
parts. I believe he will look after T-Head SoCs.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the reference pid from the cifs_io_subrequest struct to the
cifs_io_request struct as it's the same for all subreqs of a particular
request.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
In cifs, only pick a channel when setting up a read request rather than
doing so individually for every subrequest and instead use that channel for
all. This mirrors what the code in v6.9 does.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Defer read completion from the I/O thread to the cifsiod thread so as not
to slow down the I/O thread. This restores the behaviour of v6.9.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
OEMs can connect a number of types of speakers to the sidecar cs35l56
amplifiers and a different speaker requires a different firmware
configuration.
When the cs42l43 ACPI includes a property indicating a particular type
of speaker has been installed this should be passed to the cs35l56
driver instances as a device property.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240619121703.3411989-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor accessing the SDCA extension properties to make it easier to
access multiple properties to assist with future features. Return the
node itself and allow the caller to read the actual properties.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240619121703.3411989-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to teach KVM a couple of new tricks. CPTR_EL2 and its
VHE accessor CPACR_EL1 need to be handled specially:
- CPACR_EL1 is trapped on VHE so that we can track the TCPAC
and TTA bits
- CPTR_EL2.{TCPAC,E0POE} are propagated from L1 to L2
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-15-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add trap description for CPTR_EL2.{TCPAC,TAM,E0POE,TTA}.
TTA is a bit annoying as it changes location depending on E2H.
This forces us to add yet another "complex" trap condition.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-14-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Start folding the guest hypervisor's FP/SVE traps into the value
programmed in hardware. Note that as of writing this is dead code, since
KVM does a full put() / load() for every nested exception boundary which
saves + flushes the FP/SVE state.
However, this will become useful when we can keep the guest's FP/SVE
state alive across a nested exception boundary and the host no longer
needs to conservatively program traps.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Round out the ZCR_EL2 gymnastics by loading SVE state in the fast path
when the guest hypervisor tries to access SVE state.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
