Add helper to convert GT clock ticks to msec. Useful for determining if
timeouts occur by examing GT clock ticks.
v6:
- s/nom/n , s/dom/d (Jonathan)
- include math64 (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611144053.2805091-6-matthew.brost@intel.com
Copy ctx timestamp at beginning of every GPU job to a saved location.
Used to determine how long a job has been running on the hardware.
v2:
- - s/ctx_timestamp_job/ctx_job_timestamp
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611144053.2805091-4-matthew.brost@intel.com
MI_COPY_MEM_MEM GPU instructions are used to copy ctx timestamp from a
LRC registers to another location at the beginning of every jobs
execution. Add MI_COPY_MEM_MEM GPU instruction definitions.
v2:
- Include MI_COPY_MEM_MEM based on instruction order (Michal)
- Fix tabs/spaces issue (Michal)
- Use macro for DW definition (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611144053.2805091-3-matthew.brost@intel.com
LRC ctx timestamp support functions are used to determine how long a job
has run on the hardware.
v2:
- Don't use static inlines (Jani)
- Kernel doc
- s/ctx_timestamp_job/ctx_job_timestamp
v6:
- Add kernel doc for xe_lrc_update_timestamp (Lucas)
- Call xe_lrc_ctx_timestamp() in xe_lrc_update_timestamp (Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611144053.2805091-2-matthew.brost@intel.com
Available on iOS/iPadOS >= 17, where this new interface is used by
developer tools using the new RemoteXPC protocol.
This private interface lacks a status endpoint, presumably because there
isn't a physical cable that can be unplugged, nor any speed changes to
be notified about.
Note that NCM interfaces are not exposed until a mode switch is
requested, which macOS does automatically.
The mode switch can be performed like this:
uint8_t status;
libusb_control_transfer(device_handle,
LIBUSB_RECIPIENT_DEVICE | LIBUSB_REQUEST_TYPE_VENDOR |
LIBUSB_ENDPOINT_IN,
82, /* bRequest */
0, /* wValue */
3, /* wIndex */
&status,
sizeof(status),
0);
Newer versions of usbmuxd do this automatically.
Co-developed-by: Håvard Sørbø <havard@hsorbo.no>
Signed-off-by: Håvard Sørbø <havard@hsorbo.no>
Signed-off-by: Ole André Vadla Ravnås <oleavr@frida.re>
Link: https://lore.kernel.org/r/20240607074117.31322-1-oleavr@frida.re
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov says:
====================
net: bridge: mst: fix suspicious rcu usage warning
This set fixes a suspicious RCU usage warning triggered by syzbot[1] in
the bridge's MST code. After I converted br_mst_set_state to RCU, I
forgot to update the vlan group dereference helper. Fix it by using
the proper helper, in order to do that we need to pass the vlan group
which is already obtained correctly by the callers for their respective
context. Patch 01 is a requirement for the fix in patch 02.
Note I did consider rcu_dereference_rtnl() but the churn is much bigger
and in every part of the bridge. We can do that as a cleanup in
net-next.
[1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe
=============================
WARNING: suspicious RCU usage
6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Not tainted
-----------------------------
net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
4 locks held by syz-executor.1/5374:
#0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline]
#0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111
#1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789
#2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
#2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86
#3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline]
#3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline]
#3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105
stack backtrace:
CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712
nbp_vlan_group net/bridge/br_private.h:1599 [inline]
br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106
br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47
br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88
call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers kernel/time/timer.c:2417 [inline]
__run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428
run_timer_base kernel/time/timer.c:2437 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637
irq_exit_rcu+0x9/0x30 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043
</IRQ>
<TASK>
====================
Link: https://lore.kernel.org/r/20240609103654.914987-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Asbjørn Sloth Tønnesen says:
====================
net: flower: validate encapsulation control flags
Now that all drivers properly rejects unsupported flower control flags
used with FLOW_DISSECTOR_KEY_CONTROL, then time has come to add similar
checks to the drivers supporting FLOW_DISSECTOR_KEY_ENC_CONTROL.
There are currently just 4 drivers supporting this key, and
3 of those currently doesn't validate encapsulated control flags.
Encapsulation control flags may currently be unused, but they should
still be validated by the drivers, so that drivers will properly
reject any new flags when they are introduced.
This series adds some helper functions, and implements them in all
4 drivers.
NB: It is currently discussed[1] to use encapsulation control flags
for tunnel flags instead of the new FLOW_DISSECTOR_KEY_ENC_FLAGS.
[1] https://lore.kernel.org/netdev/ZmFuxElwZiYJzBkh@dcaratti.users.ipa.redhat.com/
====================
Link: https://lore.kernel.org/r/20240609173358.193178-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Encapsulation control flags are currently not used anywhere,
so all flags are currently unsupported by all drivers.
This patch adds validation of this assumption, so that
encapsulation flags may be used in the future.
In case any encapsulation control flags are masked,
flow_rule_match_has_enc_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/20240609173358.193178-6-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Encapsulation control flags are currently not used anywhere,
so all flags are currently unsupported by all drivers.
This patch adds validation of this assumption, so that
encapsulation flags may be used in the future.
In case any encapsulation control flags are masked,
flow_rule_match_has_enc_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/20240609173358.193178-5-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Encapsulation control flags are currently not used anywhere,
so all flags are currently unsupported by all drivers.
This patch adds validation of this assumption, so that
encapsulation flags may be used in the future.
In case any encapsulation control flags are masked,
flow_rule_match_has_enc_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/20240609173358.193178-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the existing check for unsupported encapsulation control flags,
to use the new helper flow_rule_is_supp_enc_control_flags().
No functional change, only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/20240609173358.193178-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two new helper functions:
flow_rule_is_supp_enc_control_flags()
flow_rule_has_enc_control_flags()
They are intended to be used for validating encapsulation control
flags, and compliment the similar helpers without "enc_" in the name.
The only difference is that they have their own error message,
to make it obvious if an unsupported flag error is related to
FLOW_DISSECTOR_KEY_CONTROL or FLOW_DISSECTOR_KEY_ENC_CONTROL.
flow_rule_has_enc_control_flags() is for drivers supporting
FLOW_DISSECTOR_KEY_ENC_CONTROL, but not supporting any
encapsulation control flags.
(Currently all 4 drivers fits this category)
flow_rule_is_supp_enc_control_flags() is currently only used
for the above helper, but should also be used by drivers once
they implement at least one encapsulation control flag.
There is AFAICT currently no need for an "enc_" variant of
flow_rule_match_has_control_flags(), as all drivers currently
supporting FLOW_DISSECTOR_KEY_ENC_CONTROL, are already calling
flow_rule_match_enc_control() directly.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/20240609173358.193178-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The net.ipv6.route.flush system parameter takes a value which specifies
a delay used during the flush operation for aging exception routes. The
written value is however not used in the currently requested flush and
instead utilized only in the next one.
A problem is that ipv6_sysctl_rtcache_flush() first reads the old value
of net->ipv6.sysctl.flush_delay into a local delay variable and then
calls proc_dointvec() which actually updates the sysctl based on the
provided input.
Fix the problem by switching the order of the two operations.
Fixes: 4990509f19 ("[NETNS][IPV6]: Make sysctls route per namespace.")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607112828.30285-1-petr.pavlu@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the missing pieces to allow multiple PPEs units, one for each GMAC.
mtk_gdm_config has been modified to work on targted mac ID,
the inner loop moved outside of the function to allow unrelated
operations like setting the MAC's PPE index.
Introduce a sanity check in flow_offload_replace to account for
non-MTK ingress devices.
Additional field 'ppe_idx' was added to struct mtk_mac in order
to keep track on the assigned PPE unit.
Signed-off-by: Elad Yifee <eladwf@gmail.com>
Link: https://lore.kernel.org/r/20240607082155.20021-1-eladwf@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix clkdev - erroring out on long strings causes boot failures, so
don't do this. Still warn about the over-sized strings (which will
never match and thus their registration with clkdev is useless.)
- Fix for ftrace with frame pointer unwinder with recent GCC changing
the way frames are stacked.
-----BEGIN PGP SIGNATURE-----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=2Kpc
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM and clkdev fixes from Russell King:
- Fix clkdev - erroring out on long strings causes boot failures, so
don't do this. Still warn about the over-sized strings (which will
never match and thus their registration with clkdev is useless)
- Fix for ftrace with frame pointer unwinder with recent GCC changing
the way frames are stacked.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory
clkdev: don't fail clkdev_alloc() if over-sized
Petr Machata says:
====================
Allow configuration of multipath hash seed
Let me just quote the commit message of patch #2 here to inform the
motivation and some of the implementation:
When calculating hashes for the purpose of multipath forwarding,
both IPv4 and IPv6 code currently fall back on
flow_hash_from_keys(). That uses a randomly-generated seed. That's a
fine choice by default, but unfortunately some deployments may need
a tighter control over the seed used.
In this patchset, make the seed configurable by adding a new sysctl
key, net.ipv4.fib_multipath_hash_seed to control the seed. This seed
is used specifically for multipath forwarding and not for the other
concerns that flow_hash_from_keys() is used for, such as queue
selection. Expose the knob as sysctl because other such settings,
such as headers to hash, are also handled that way.
Despite being placed in the net.ipv4 namespace, the multipath seed
sysctl is used for both IPv4 and IPv6, similarly to e.g. a number of
TCP variables. Like those, the multipath hash seed is a per-netns
variable.
The seed used by flow_hash_from_keys() is a 128-bit quantity.
However it seems that usually the seed is a much more modest value.
32 bits seem typical (Cisco, Cumulus), some systems go even lower.
For that reason, and to decouple the user interface from
implementation details, go with a 32-bit quantity, which is then
quadruplicated to form the siphash key.
One example of use of this interface is avoiding hash polarization,
where two ECMP routers, one behind the other, happen to make consistent
hashing decisions, and as a result, part of the ECMP space of the latter
router is never used. Another is a load balancer where several machines
forward traffic to one of a number of leaves, and the forwarding
decisions need to be made consistently. (This is a case of a desired
hash polarization, mentioned e.g. in chapter 6.3 of [0].)
There has already been a proposal to include a hash seed control
interface in the past[1].
- Patches #1-#2 contain the substance of the work
- Patch #3 is an mlxsw offload
- Patches #4 and #5 are a selftest
[0] https://www.usenix.org/system/files/conference/nsdi18/nsdi18-araujo.pdf
[1] https://lore.kernel.org/netdev/YIlVpYMCn%2F8WfE1P@rnd/
====================
Link: https://lore.kernel.org/r/20240607151357.421181-1-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that exercises the sysctl added in the previous patches.
Test that set/get works as expected; that across seeds we eventually hit
all NHs (test_mpath_seed_*); and that a given seed keeps hitting the same
NHs even across seed changes (test_mpath_seed_stability_*).
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-6-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to be able to save the current value of a sysctl without changing
it, split the relevant bit out of sysctl_set() into a new helper.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-5-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When Spectrum machines compute hash for the purposes of ECMP routing, they
use a seed specified through RECR_v2 (Router ECMP Configuration Register).
Up until now mlxsw computed the seed by hashing the machine's base MAC.
Now that we can optionally have a user-provided seed, use that if possible.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-4-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calculating hashes for the purpose of multipath forwarding, both IPv4
and IPv6 code currently fall back on flow_hash_from_keys(). That uses a
randomly-generated seed. That's a fine choice by default, but unfortunately
some deployments may need a tighter control over the seed used.
In this patch, make the seed configurable by adding a new sysctl key,
net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used
specifically for multipath forwarding and not for the other concerns that
flow_hash_from_keys() is used for, such as queue selection. Expose the knob
as sysctl because other such settings, such as headers to hash, are also
handled that way. Like those, the multipath hash seed is a per-netns
variable.
Despite being placed in the net.ipv4 namespace, the multipath seed sysctl
is used for both IPv4 and IPv6, similarly to e.g. a number of TCP
variables.
The seed used by flow_hash_from_keys() is a 128-bit quantity. However it
seems that usually the seed is a much more modest value. 32 bits seem
typical (Cisco, Cumulus), some systems go even lower. For that reason, and
to decouple the user interface from implementation details, go with a
32-bit quantity, which is then quadruplicated to form the siphash key.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-3-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patches will add a sysctl to control multipath hash
seed. In order to centralize the hash computation, add a helper,
fib_multipath_hash_from_keys(), and have all IPv4 and IPv6 route.c
invocations of flow_hash_from_keys() go through this helper instead.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-2-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=yxF0
-----END PGP SIGNATURE-----
Merge tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 fixes insufficient sanitization of netlink attributes for the
inner expression which can trigger nul-pointer dereference,
from Davide Ornaghi.
Patch #2 address a report that there is a race condition between
namespace cleanup and the garbage collection of the list:set
type. This patch resolves this issue with other minor issues
as well, from Jozsef Kadlecsik.
Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp
has been mangled, this unbreaks ip6 dscp set $v,
from Florian Westphal.
All of these patches address issues that are present in several releases.
* tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: Use flowlabel flow key when re-routing mangled packets
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
netfilter: nft_inner: validate mandatory meta and payload
====================
Link: https://lore.kernel.org/r/20240611220323.413713-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix kworker explosion, due to calling submit_bio() (which can block)
from a multithreaded workqueue
- fix error handling in btree node scan
- forward compat fix: kill an old debug assert
- key cache shrinker fixes
this is a partial fix for stalls doing multithreaded creates - there
were various O(n^2) issues the key cache shrinker was hitting
https://lore.kernel.org/linux-bcachefs/fmfpgkt3dlzxhotrfmqg3j3wn5bpqiqvlc44xllncvdkimmx3i@n4okabtvhu7t/
there's more work coming here; I'm working on a patch to delete the
key cache lock, which initial testing shows to be a pretty drastic
performance improvement
- assorted syzbot fixes
-----BEGIN PGP SIGNATURE-----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=DhKg
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- fix kworker explosion, due to calling submit_bio() (which can block)
from a multithreaded workqueue
- fix error handling in btree node scan
- forward compat fix: kill an old debug assert
- key cache shrinker fixes
This is a partial fix for stalls doing multithreaded creates - there
were various O(n^2) issues the key cache shrinker was hitting [1].
There's more work coming here; I'm working on a patch to delete the
key cache lock, which initial testing shows to be a pretty drastic
performance improvement
- assorted syzbot fixes
Link: https://lore.kernel.org/linux-bcachefs/CAGudoHGenxzk0ZqPXXi1_QDbfqQhGHu+wUwzyS6WmfkUZ1HiXA@mail.gmail.com/ [1]
* tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix rcu_read_lock() leak in drop_extra_replicas
bcachefs: Add missing bch_inode_info.ei_flags init
bcachefs: Add missing synchronize_srcu_expedited() call when shutting down
bcachefs: Check for invalid bucket from bucket_gen(), gc_bucket()
bcachefs: Replace bucket_valid() asserts in bucket lookup with proper checks
bcachefs: Fix snapshot_create_lock lock ordering
bcachefs: Fix refcount leak in check_fix_ptrs()
bcachefs: Leave a buffer in the btree key cache to avoid lock thrashing
bcachefs: Fix reporting of freed objects from key cache shrinker
bcachefs: set sb->s_shrinker->seeks = 0
bcachefs: increase key cache shrinker batch size
bcachefs: Enable automatic shrinking for rhashtables
bcachefs: fix the display format for show-super
bcachefs: fix stack frame size in fsck.c
bcachefs: Delete incorrect BTREE_ID_NR assertion
bcachefs: Fix incorrect error handling found_btree_node_is_readable()
bcachefs: Split out btree_write_submit_wq
Pull MD updates from Song:
"The major changes in this PR are:
- sync_action fix and refactoring, by Yu Kuai;
- Various small fixes by Christoph Hellwig, Li Nan, and Ofir Gal."
* tag 'md-6.11-20240612' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid5: avoid BUG_ON() while continue reshape after reassembling
md: pass in max_sectors for pers->sync_request()
md: factor out helpers for different sync_action in md_do_sync()
md: replace last_sync_action with new enum type
md: use new helpers in md_do_sync()
md: don't fail action_store() if sync_thread is not registered
md: remove parameter check_seq for stop_sync_thread()
md: replace sysfs api sync_action with new helpers
md: factor out helper to start reshape from action_store()
md: add new helpers for sync_action
md: add a new enum type sync_action
md: rearrange recovery_flags
md/md-bitmap: fix writing non bitmap pages
md/raid1: don't free conf on raid0_run failure
md/raid0: don't free conf on raid0_run failure
md: make md_flush_request() more readable
md: fix deadlock between mddev_suspend and flush bio
md: change the return value type of md_write_start to void
md: do not delete safemode_timer in mddev_suspend
This error message can be triggered by userspace. Use NL_SET_ERR_MSG so
the message is returned to the user and to avoid polluting the kernel
logs. Additionally, change the return value from EFAULT to EBUSY to
better reflect the error (which has nothing to do with addressing).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240611154116.2643662-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code example fails to compile:
1) addr_conv is defined twice, once as a VLA, which have been phased out
2) submit is not a pointer, but is still dereferenced with ->
3) The first call to async_xor() lacked the trailing semicolon
Fix these issues and while at it, fix some code style nitpicks as well:
1) make the functions static as users are unlikely to export them
2) include the relevant header
3) Shorten the example a bit by removing a redundant variable
definition
Fixes: 04ce9ab385 ("async_xor: permit callers to pass in a 'dma/page scribble' region")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Andre Noll <maan@tuebingen.mpg.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240529-async-dma-docs-v2-1-8faf87e72e6d@pengutronix.de
In order to improve performance of typical scenarios we can try to insert
the entire vma on fault. This accelerates typical cases, such as when
the MMIO region is DMA mapped by QEMU. The vfio_iommu_type1 driver will
fault in the entire DMA mapped range through fixup_user_fault().
In synthetic testing, this improves the time required to walk a PCI BAR
mapping from userspace by roughly 1/3rd.
This is likely an interim solution until vmf_insert_pfn_{pmd,pud}() gain
support for pfnmaps.
Suggested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/all/Zl6XdUkt%2FzMMGOLF@yzhao56-desk.sh.intel.com/
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240607035213.2054226-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Florian Westphal says:
====================
net: flow dissector: allow explicit passing of netns
Change since last version:
fix kdoc comment warning reported by kbuild robot, no other changes,
thus retaining RvB tags from Eric and Willem.
v1: https://lore.kernel.org/netdev/20240607083205.3000-1-fw@strlen.de/
Years ago flow dissector gained ability to delegate flow dissection
to a bpf program, scoped per netns.
The netns is derived from skb->dev, and if that is not available, from
skb->sk. If neither is set, we hit a (benign) WARN_ON_ONCE().
This WARN_ON_ONCE can be triggered from netfilter.
Known skb origins are nf_send_reset and ipv4 stack generated IGMP
messages.
Lets allow callers to pass the current netns explicitly and make
nf_tables use those instead.
This targets net-next instead of net because the WARN is benign and this
is not a regression.
====================
Link: https://lore.kernel.org/r/20240608221057.16070-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to previous patch: apply same logic for
__skb_get_hash_symmetric and let callers pass the netns to the dissector
core.
Existing function is turned into a wrapper to avoid adjusting all
callers, nft_hash.c uses new function.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240608221057.16070-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Years ago flow dissector gained ability to delegate flow dissection
to a bpf program, scoped per netns.
Unfortunately, skb_get_hash() only gets an sk_buff argument instead
of both net+skb. This means the flow dissector needs to obtain the
netns pointer from somewhere else.
The netns is derived from skb->dev, and if that is not available, from
skb->sk. If neither is set, we hit a (benign) WARN_ON_ONCE().
Trying both dev and sk covers most cases, but not all, as recently
reported by Christoph Paasch.
In case of nf-generated tcp reset, both sk and dev are NULL:
WARNING: .. net/core/flow_dissector.c:1104
skb_flow_dissect_flow_keys include/linux/skbuff.h:1536 [inline]
skb_get_hash include/linux/skbuff.h:1578 [inline]
nft_trace_init+0x7d/0x120 net/netfilter/nf_tables_trace.c:320
nft_do_chain+0xb26/0xb90 net/netfilter/nf_tables_core.c:268
nft_do_chain_ipv4+0x7a/0xa0 net/netfilter/nft_chain_filter.c:23
nf_hook_slow+0x57/0x160 net/netfilter/core.c:626
__ip_local_out+0x21d/0x260 net/ipv4/ip_output.c:118
ip_local_out+0x26/0x1e0 net/ipv4/ip_output.c:127
nf_send_reset+0x58c/0x700 net/ipv4/netfilter/nf_reject_ipv4.c:308
nft_reject_ipv4_eval+0x53/0x90 net/ipv4/netfilter/nft_reject_ipv4.c:30
[..]
syzkaller did something like this:
table inet filter {
chain input {
type filter hook input priority filter; policy accept;
meta nftrace set 1
tcp dport 42 reject with tcp reset
}
chain output {
type filter hook output priority filter; policy accept;
# empty chain is enough
}
}
... then sends a tcp packet to port 42.
Initial attempt to simply set skb->dev from nf_reject_ipv4 doesn't cover
all cases: skbs generated via ipv4 igmp_send_report trigger similar splat.
Moreover, Pablo Neira found that nft_hash.c uses __skb_get_hash_symmetric()
which would trigger same warn splat for such skbs.
Lets allow callers to pass the current netns explicitly.
The nf_trace infrastructure is adjusted to use the new helper.
__skb_get_hash_symmetric is handled in the next patch.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/494
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240608221057.16070-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit bcf11b5e99 ("riscv: Enable idle generic idle loop") enable
idle generic idle loop for RISCV, but the document is not updated
synchronously, so update RISCV support for nohlt.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Fixes: bcf11b5e99 ("riscv: Enable idle generic idle loop")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240604114005.875609-1-ruanjinjie@huawei.com
The checktransupdate.py script helps track the translation status of
the documentation in different locales, e.g., zh_CN and verify if
these documenation is up-to-date. More specially, it uses `git log`
commit to find the latest english commit from the translation commit
(order by author date) and the latest english commits from HEAD. If
differences occur, report the file and commits that need to be updated.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Cheng Ziqiu <chengziqiu@hust.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240611131723.53515-1-dzm91@hust.edu.cn
The DLM rcom handling has a check that all exflags are the same for the
whole lockspace membership nodes. There are some flags that requires
such handling, however DLM_LSFL_SOFTIRQ does not require this handling
and it should be backwards compatibility with other lockspaces that does
not set this flag.
Fixes: f328a26eeb ("dlm: introduce DLM_LSFL_SOFTIRQ_SAFE")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The last use of 'dlm_processed_nodes' was removed in
commit 1696c75f18 ("fs: dlm: add send ack threshold and append acks to
msgs").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: David Teigland <teigland@redhat.com>
Make it again possible for sparse to verify that blk_status_t and Unix
error codes are used in the proper context by making nbd_send_cmd()
return a blk_status_t instead of an integer.
No functionality has been changed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ bvanassche: added description and made two small formatting changes ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240604221531.327131-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The X-Powers AXP717 PMIC has separate input supply pins for each group
of LDOs, so they are not all using the same DCDC1 input, as described
currently.
Replace the "supply" member of each LDO description with the respective
group supply name, so that the supply dependencies can be correctly
described in the devicetree.
Also fix two off-by-ones in the regulator macros, after some double
checking the numbers against the datasheet. This uncovered a bug in the
datasheet: add a comment to document this.
Fixes: d2ac3df75c ("regulator: axp20x: add support for the AXP717")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240418000736.24338-3-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During remove & rescan cycle, PCI subsystem will recalculate and adjust
the bridge window sizing that was initially done by "BIOS". The size
calculation is based on the required alignment of the largest resource
among the downstream resources as per pbus_size_mem() (unimportant or
zero parameters marked with "..."):
min_align = calculate_mem_align(aligns, max_order);
size0 = calculate_memsize(size, ..., min_align);
inside calculate_memsize(), for the largest alignment:
min_align = align1 >> 1;
...
return min_align;
and then in calculate_memsize():
return ALIGN(max(size, ...), align);
If the original bridge window sizing tried to conserve space, this will
lead to massive increase of the required bridge window size when the
downstream has a large disparity in BAR sizes. E.g., with 16MiB and
16GiB BARs this results in 24GiB bridge window size even if 16MiB BAR
does not require gigabytes of space to fit.
When doing remove & rescan for a bus that contains such a PCI device, a
larger bridge window is suddenly required on rescan but when there is a
bridge window upstream that is already assigned based on the original
size, it cannot be enlarged to the new requirement. This causes the
allocation of the bridge window to fail (0x600000000 > 0x400ffffff):
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [mem 0x40400000-0x406fffff]
pci 0000:01:00.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:03:00.0: device released
pci 0000:02:01.0: device released
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 0
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 0
pci 0000:03:00.0: BAR 0 [mem 0x6400000000-0x6400ffffff 64bit pref]
pci 0000:03:00.0: BAR 2 [mem 0x6000000000-0x63ffffffff 64bit pref]
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 1
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 1
pci 0000:02:01.0: bridge window [mem size 0x600000000 64bit pref]: can't assign; no space
pci 0000:02:01.0: bridge window [mem size 0x600000000 64bit pref]: failed to assign
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]: assigned
pci 0000:03:00.0: BAR 2 [mem size 0x400000000 64bit pref]: can't assign; no space
pci 0000:03:00.0: BAR 2 [mem size 0x400000000 64bit pref]: failed to assign
pci 0000:03:00.0: BAR 0 [mem size 0x01000000 64bit pref]: can't assign; no space
pci 0000:03:00.0: BAR 0 [mem size 0x01000000 64bit pref]: failed to assign
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]: assigned
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
This is a major surprise for users who are suddenly left with a device that
was working fine with the original bridge window sizing.
Even if the already assigned bridge window could be enlarged by
reallocation in some cases (something the current code does not attempt
to do), it is not possible in general case and the large amount of
wasted space at the tail of the bridge window may lead to other
resource exhaustion problems on Root Complex level (think of multiple
PCIe cards with VFs and BAR size disparity in a single system).
PCI BARs only need natural alignment (PCIe r6.1, sec 7.5.1.2.1) and bridge
memory windows need 1MiB (sec 7.5.1.3). The current bridge window tail
alignment rule was introduced in the commit 5d0a8965aea9 ("[PATCH] 2.5.14:
New PCI allocation code (alpha, arm, parisc) [2/2]") that only states:
"pbus_size_mem: core stuff; tested with randomly generated sets of
resources". It does not explain the motivation for the extra tail space
allocated that is not truly needed by the downstream resources. As such, it
is far from clear if it ever has been required by any HW.
To prevent devices with BAR size disparity from becoming unusable after
remove & rescan cycle, attempt to do a truly minimal allocation for memory
resources if needed. First check if the normally calculated bridge window
will not fit into an already assigned upstream resource. In such case, try
with relaxed bridge window tail sizing rules instead where no extra tail
space is requested beyond what the downstream resources require. Only
enforce the alignment requirement of the bridge window itself (normally
1MiB).
With this patch, the resources are successfully allocated:
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 1
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 1
pcieport 0000:01:00.0: Assigned bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] to [bus 02-04] cannot fit 0x600000000 required for 0000:02:01.0 bridging to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] to [bus 03] requires relaxed alignment rules
pcieport 0000:01:00.0: Assigned bridge window [mem 0x40400000-0x406fffff] to [bus 02-04] free space at [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]: assigned
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]: assigned
pci 0000:03:00.0: BAR 2 [mem 0x6000000000-0x63ffffffff 64bit pref]: assigned
pci 0000:03:00.0: BAR 0 [mem 0x6400000000-0x6400ffffff 64bit pref]: assigned
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]: assigned
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
This patch draws inspiration from the initial investigations and work by
Mika Westerberg.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216795
Link: https://lore.kernel.org/linux-pci/20190812144144.2646-1-mika.westerberg@linux.intel.com/
Fixes: 5d0a8965aea9 ("[PATCH] 2.5.14: New PCI allocation code (alpha, arm, parisc) [2/2]")
Link: https://lore.kernel.org/r/20240507102523.57320-9-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
