On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-gw-pld.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-mc33880.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-pcf857x.o
Add the missing invocations of the MODULE_DESCRIPTION() macro,
including the one missing in gpio-pl061.c, which is not built for x86.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240606-md-drivers-gpio-v1-1-cb42d240ca5c@quicinc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Data may have lots of overlapping mmaps. The regular insert adds at
the end and relies on a later sort. For data with overlapping mappings
the sort will happen during a subsequent maps__find or
__maps__fixup_overlap_and_insert, there's never a period where the
inserted maps buffer up and a single sort happens. To avoid back to
back sorts, maintain the sort order when fixing up and
inserting. Previously the first_ending_after search was O(log n) where
n is the size of maps, and the insert was O(1) but because of the
continuous sorting was becoming O(n*log(n)). With maintaining sort
order, the insert now becomes O(n) for a memmove.
For a perf report on a perf.data file containing overlapping mappings
the time numbers are:
Before:
real 0m5.894s
user 0m5.650s
sys 0m0.231s
After:
real 0m0.675s
user 0m0.454s
sys 0m0.196s
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-4-irogers@google.com
When an 'after' map is generated the 'new' map must be before it so
terminate iterating and don't resort. If the entry 'pos' is entirely
overlapped by the 'new' mapping then don't remove and insert the
mapping, just replace - again to remove sorting.
For a perf report on a perf.data file containing overlapping mappings
the time numbers are:
Before:
real 0m9.856s
user 0m9.637s
sys 0m0.204s
After:
real 0m5.894s
user 0m5.650s
sys 0m0.231s
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-3-irogers@google.com
In the case 'before' and 'after' are broken out from pos,
maps_by_address may be changed by __maps__insert, as such it needs
re-reading.
Don't ignore the return value from __maps_insert.
Fixes: 659ad3492b ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Steinar H . Gunderson <sesse@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521165109.708593-2-irogers@google.com
There's now no need to make sure subreq->io_iter is advanced to match
subreq->transferred before calling one of the netfs subrequest termination
functions as the check has been removed netfslib and the iterator is reset
prior to retrying a subreq.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such
deadlock.
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will
not be run. As a consequence, `sfp_hwmon_remove()` is not getting
run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()`
itself checks `sfp->sm_mod_state` anyways, so this check was not
really needed in the first place.
Fixes: d2e816c029 ("net: sfp: handle module remove outside state machine")
Signed-off-by: "Csókás, Bence" <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240605084251.63502-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some docks support MAC pass-through - MAC address
is taken from another device.
Driver should indicate that with NET_ADDR_STOLEN flag.
This should help to avoid collisions if network interface
names are generated with MAC policy.
Reported and discussed here
https://github.com/systemd/systemd/issues/33104
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240605153340.25694-1-gmazyland@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable another workaround that is implemented inside the GuC.
v2: Use the correct Gen12 w/a id rather than the Xe version (review
feedback from Matthew R) also extend to include ARL.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528230515.479395-1-John.C.Harrison@Intel.com
Building with W=1 incorrectly emits the following warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in vmlinux.o
This check should apply only to modules.
Fixes: 1fffe7a34c ("script: modpost: emit a warning when the description is missing")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
In commit b18b047002 ("kbuild: change scripts/mksysmap into sed
script"), the mksysmap script was transformed into a sed script,
made directly executable with "#!/bin/sed -f". Apparently, the path to
sed is different on NixOS.
The shebang can't use the env command, otherwise the "sed -f" command
would be treated as a single argument. This can be solved with the -S
flag, but that is a GNU extension. Explicitly use sed instead of relying
on the executable shebang to fix NixOS builds without breaking build
environments using Busybox.
Fixes: b18b047002 ("kbuild: change scripts/mksysmap into sed script")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
At a high-level, detachable Trogdors (sometimes known as Strongbads)
don't have a cros_ec keyboard, while all clamshell Trogdors (only known
as Trogdors) always have a cros_ec keyboard. Looking closer though, all
clamshells have a USB type-A connector and a hardwired USB camera. And
all detachables replace the USB camera with a MIPI based one and swap
the USB type-a connector for the detachable keyboard pogo pins.
Split the detachable and clamshell bits into different files so we can
describe these differences in one place instead of in each board that
includes sc7180-trogdor.dtsi. For now this is just the keyboard part,
but eventually this will include the type-a port and the pogo pins.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-4-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We put a header before modifying pinctrl nodes defined in
sc7180-trogdor.dtsi in every other file. Add one here so we know that
this section is for pinctrl modifications.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-3-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It's simpler to reason about things if we disable nodes instead of
deleting them. Disable the second usb type-c connector node on
quackingstick instead of deleting it so that we can reason about ports
more easily.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-2-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8450 PDX223
Link: https://lore.kernel.org/r/20240605160032.150587-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
for USB only, for now. The DP ports will come at a later stage since
they use muxes.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-3-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
for USB only, for now. The DP ports will come at a later stage since
they use retimers.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-2-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the port/endpoints graph between the USB/DP combo PHYs and their
corresponding DP controllers.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-1-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the arm64-fixes-for-6.10 branch into arm64-for-6.11 to resolve the
merge conflict caused by pmic-glink and reserved-memory introduction at
the same place in the x1e80100 crd and qcp dts files.
The core change is to detect unusually large number of VPD pages
(caused by device manufacturers having an endiannes issue) and reject
them rather than trying to parse a huge non-existent array. The
remaining fixes are in drivers the most user visible of which is the
ALUA state transition recognition (leads to intermittent I/O errors in
some situations otherwise).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZmIHRiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcwfAQCS1dL9
j9tLAj5mol+WwsfcValZlpb/h5pKXsYrHZcxOQEA3A5DARsEgVEJMQpGuO4N+hcV
0lSmRV+iC85h5F08COI=
=1+e/
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The core change is to detect unusually large number of VPD pages
(caused by device manufacturers having an endiannes issue) and reject
them rather than trying to parse a huge non-existent array.
The remaining fixes are in drivers the most user visible of which is
the ALUA state transition recognition (leads to intermittent I/O
errors in some situations otherwise)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: mcq: Fix error output and clean up ufshcd_mcq_abort()
scsi: core: Handle devices which return an unusually large VPD page count
scsi: mpt3sas: Add missing kerneldoc parameter descriptions
scsi: qedf: Set qed_slowpath_params to zero before use
scsi: qedf: Wait for stag work during unload
scsi: qedf: Don't process stag work during unload and recovery
scsi: sr: Fix unintentional arithmetic wraparound
scsi: core: alua: I/O errors for ALUA state transitions
scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()
Drivers often need to first disable an interrupt, carry out some
action, and then reenable the interrupt. Introduce support for the
"guard" notation for this so that the following is possible:
...
scoped_cond_guard(mutex_intr, return -EINTR, &data->sysfs_mutex) {
guard(disable_irq)(&client->irq);
error = elan_acquire_baseline(data);
if (error)
return error;
}
...
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/ZljAV6HjkPSEhWSw@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmZh/ZIUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vz5iBAAhTW4ozlsNeprj2lI9dIwKt4WBECj
qK81ZegCNhCrZXCx9jPt+FAqvpce1lL9KAOIj08PCvBFgt856bGfcnD631K4Bqzp
qzJtp/kiFh6/qrP9IYs31wGKRbjzxlkwFnDEMApewQAGDiCj4QoWfuHgMqbNCLHR
63JqnKEFQoQiFaptdHbU11d2gMc5iZVtyHP7OKZPJWE4qu7GH0oPZmDMxLbReWGn
7iWSQioTWECkoXXCSGSaxLaFkF9s8kG3NVTZ0TDLg2j9DfgfuwAAi02JtlNfbGjB
xIFIKGNaCLTey7glZ7sNWZcG4mwj0i9cqZsuWs17/8E1XOYWsT8X97R9wAS0NkqA
gnOIOgyO68A/Q/BKczGyYXJKq2yTFor+F12nXXZEulnRA5jBEQ6I98h+qoHQOoma
ipjUrIOVUUrDy0LYuhfMxzc3gx+RZvUcsc1pHgJRq/7d/dM+Xpl/T421t3VcyEz8
pdNDSb5Zz7lxs5TlZuhNYwTeqbR3NAOIViMhcxhQWQCYPRlykI7wERLkEvar5Pjs
RshO0+v5z5FcnzTksrqyE8x1+Tsf7kOzb/hrP+naj5lZ7M4TIWuSsQIG0UahKYWB
EZp5gXbEjwrstMctUCx89V9nYjVggtSmW4MWcUDzdwWdxYzEowzDceJekBRYQiss
u+io8skyHrJgL7w=
=DQJk
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Revert lockdep checking on locking that protects device resets from
user-space config accesses; it exposed issues for which fixes are in
the works but are too risky for this cycle (Dan Williams)
* tag 'pci-v6.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Revert the cfg_access_lock lockdep mechanism
bpf_map_lookup_elem() has been removed from do_test(), it makes the
sk_stg_map argument of do_test() useless. In addition, two exactly the
same opts are passed in all the places where do_test() is invoked, so
cli_opts argument can be dropped too.
This patch drops these two useless arguments of do_test() in bpf_tcp_ca.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7056eab111d78a05bce29d2821228dc93f240de4.1717054461.git.tanggeliang@kylinos.cn
The newly added helper start_test() can be used in test_dctcp_fallback()
too, to replace start_server_str() and connect_to_fd_opts(). In that
way, two network_helper_opts srv_opts and cli_opts are used instead of
the previously shared opts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/792ca3bb013fa06e618176da02d75e4f79a76733.1717054461.git.tanggeliang@kylinos.cn
This patch uses connect_to_fd_opts() instead of using connect_fd_to_fd()
and settcpca() in do_test() in prog_tests/bpf_tcp_ca.c to accept a struct
network_helper_opts argument.
Then define a dctcp dedicated post_socket_cb callback stg_post_socket_cb(),
invoking both settcpca() and bpf_map_update_elem() in it, and set it in
test_dctcp(). For passing map_fd into stg_post_socket_cb() callback, a new
member map_fd is added in struct cb_opts.
Add another "const struct network_helper_opts *cli_opts" to do_test() to
separate it from the server "opts".
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/876ec90430865bc468e3b7f6fb2648420b075548.1717054461.git.tanggeliang@kylinos.cn
Document the CRU IP found in Renesas RZ/G2UL SoC.
The CRU block on the RZ/G2UL SoC is identical to one found on the
RZ/G2L SoC, but it does not support parallel input.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240605154115.263447-3-biju.das.jz@bp.renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document the CSI-2 block which is part of CRU found in Renesas RZ/G2UL
SoC.
The CSI-2 block on the RZ/G2UL SoC is identical to one found on the
RZ/G2L SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240605154115.263447-2-biju.das.jz@bp.renesas.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
DSI-attached devices could respond to more than one virtual channel
number, thus their bindings are supposed to constrain the 'reg' property
to match hardware. Add missing 'reg' constrain for DSI-attached display
panels, based on DTS sources in Linux kernel (assume all devices take
only one channel number).
Few bindings missed previous fixup: LG SW43408 and Raydium RM69380.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240605105659.27433-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
There is no need to mention and/or to touch in any way the intermediate
(source) clocks. Drop them from MSM8996 UFSHCD schema, making it follow
the example lead by all other platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240528-msm8996-fix-ufs-v5-1-b475c341126e@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
'tegra_pcie_soc' has been unused since 56e15a238d ("PCI: tegra: Add
Tegra194 PCIe support"). Remove it.
Link: https://lore.kernel.org/r/20240527160118.37069-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
'acpi_handle_node' is unused since 63f534b8ba ("ACPI: PCI: Rework
acpi_get_pci_dev()"). Remove it.
Link: https://lore.kernel.org/r/20240509000858.204114-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add Rodrigo Vivi as an Xe driver maintainer.
v2:
- Cc also Lucas De Marchi (Rodrigo vivi)
- Remove a blank line in commit the commit message (Lucas De Marchi)
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240602190959.2981-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
