The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value
structures in the Preserved Fields Area (PFA) of the NVM. This is used by
the driver to access data such as the Part Board Assembly identifier.
The function uses simple logic to iterate over the PFA. First, the pointer
to the PFA in the NVM is read. Then the total length of the PFA is read
from the first word.
A pointer to the first TLV is initialized, and a simple loop iterates over
each TLV. The pointer is moved forward through the NVM until it exceeds the
PFA area.
The logic seems sound, but it is missing a key detail. The Preserved
Fields Area length includes one additional final word. This is documented
in the device data sheet as a dummy word which contains 0xFFFF. All NVMs
have this extra word.
If the driver tries to scan for a TLV that is not in the PFA, it will read
past the size of the PFA. It reads and interprets the last dummy word of
the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA
as a length.
The PFA resides within the Shadow RAM portion of the NVM, which is
relatively small. All of its offsets are within a 16-bit size. The PFA
pointer and TLV pointer are stored by the driver as 16-bit values.
In almost all cases, the word following the PFA will be such that
interpreting it as a length will result in 16-bit arithmetic overflow. Once
overflowed, the new next_tlv value is now below the maximum offset of the
PFA. Thus, the driver will continue to iterate the data as TLVs. In the
worst case, the driver hits on a sequence of reads which loop back to
reading the same offsets in an endless loop.
To fix this, we need to correct the loop iteration check to account for
this extra word at the end of the PFA. This alone is sufficient to resolve
the known cases of this issue in the field. However, it is plausible that
an NVM could be misconfigured or have corrupt data which results in the
same kind of overflow. Protect against this by using check_add_overflow
when calculating both the maximum offset of the TLVs, and when calculating
the next_tlv offset at the end of each loop iteration. This ensures that
the driver will not get stuck in an infinite loop when scanning the PFA.
Fixes: e961b679fb ("ice: add board identifier info to devlink .info_get")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-1-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixed MAC addresses help with debugging as last four bytes identify the
network namespace.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240603093322.3150030-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixed MAC addresses help with debugging as last four bytes identify the
network namespace.
Moreover, it allows to mimic the real life setup with for example bridge
having the same MAC address on each port.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240603093322.3150030-2-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability. No changes in resulting DTBs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605154605.149051-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The error handling in nilfs_empty_dir() when a directory folio/page read
fails is incorrect, as in the old ext2 implementation, and if the
folio/page cannot be read or nilfs_check_folio() fails, it will falsely
determine the directory as empty and corrupt the file system.
In addition, since nilfs_empty_dir() does not immediately return on a
failed folio/page read, but continues to loop, this can cause a long loop
with I/O if i_size of the directory's inode is also corrupted, causing the
log writer thread to wait and hang, as reported by syzbot.
Fix these issues by making nilfs_empty_dir() immediately return a false
value (0) if it fails to get a directory folio/page.
Link: https://lkml.kernel.org/r/20240604134255.7165-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+c8166c541d3971bf6c87@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c8166c541d3971bf6c87
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Grepping /proc/allocinfo for "noprof" reveals several xyz_noprof
functions, which means internally they are calling profiled functions.
This should never happen as such calls move allocation charge from a
higher level location where it should be accounted for into these lower
level helpers. Fix this by replacing profiled function calls with noprof
ones.
Link: https://lkml.kernel.org/r/20240531205350.3973009-1-surenb@google.com
Fixes: b951aaff50 ("mm: enable page allocation tagging")
Fixes: e26d8769da ("mempool: hook up to memory allocation profiling")
Fixes: 88ae5fb755 ("mm: vmalloc: enable memory allocation profiling")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We normally ksm_zero_pages++ in ksmd when page is merged with zero page,
but ksm_zero_pages-- is done from page tables side, where there is no any
accessing protection of ksm_zero_pages.
So we can read very exceptional value of ksm_zero_pages in rare cases,
such as -1, which is very confusing to users.
Fix it by changing to use atomic_long_t, and the same case with the
mm->ksm_zero_pages.
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-2-34bb358fdc13@linux.dev
Fixes: e2942062e0 ("ksm: count all zero pages placed by KSM")
Fixes: 6080d19f07 ("ksm: add ksm zero pages for each process")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/ksm: fix some accounting problems", v3.
We encountered some abnormal ksm_pages_scanned and ksm_zero_pages during
some random tests.
1. ksm_pages_scanned unchanged even ksmd scanning has progress.
2. ksm_zero_pages maybe -1 in some rare cases.
This patch (of 2):
During testing, I found ksm_pages_scanned is unchanged although the
scan_get_next_rmap_item() did return valid rmap_item that is not NULL.
The reason is the scan_get_next_rmap_item() will return NULL after a full
scan, so ksm_do_scan() just return without accounting of the
ksm_pages_scanned.
Fix it by just putting ksm_pages_scanned accounting in that loop, and it
will be accounted more timely if that loop would last for a long time.
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-0-34bb358fdc13@linux.dev
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-1-34bb358fdc13@linux.dev
Fixes: b348b5fe2b ("mm/ksm: add pages scanned metric")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As noticed by Brian, KMSAN should not be zeroing the origin when
unpoisoning parts of a four-byte uninitialized value, e.g.:
char a[4];
kmsan_unpoison_memory(a, 1);
This led to false negatives, as certain poisoned values could receive zero
origins, preventing those values from being reported.
To fix the problem, check that kmsan_internal_set_shadow_origin() writes
zero origins only to slots which have zero shadow.
Link: https://lkml.kernel.org/r/20240528104807.738758-1-glider@google.com
Fixes: f80be4571b ("kmsan: add KMSAN runtime core")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/lkml/20240524232804.1984355-1-bjohannesmeyer@gmail.com/T/
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Christoph reports a page allocator splat triggered by xfstests:
generic/176 214s ... [ 1204.507931] run fstests generic/176 at 2024-05-27 12:52:30
XFS (nvme0n1): Mounting V5 Filesystem cd936307-415f-48a3-b99d-a2d52ae1f273
XFS (nvme0n1): Ending clean mount
XFS (nvme1n1): Mounting V5 Filesystem ab3ee1a4-af62-4934-9a6a-6c2fde321850
XFS (nvme1n1): Ending clean mount
XFS (nvme1n1): Unmounting Filesystem ab3ee1a4-af62-4934-9a6a-6c2fde321850
XFS (nvme1n1): Mounting V5 Filesystem 7099b02d-9c58-4d1d-be1d-2cc472d12cd9
XFS (nvme1n1): Ending clean mount
------------[ cut here ]------------
page type is 3, passed migratetype is 1 (nr=512)
WARNING: CPU: 0 PID: 509870 at mm/page_alloc.c:645 expand+0x1c5/0x1f0
Modules linked in: i2c_i801 crc32_pclmul i2c_smbus [last unloaded: scsi_debug]
CPU: 0 PID: 509870 Comm: xfs_io Not tainted 6.10.0-rc1+ #2437
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:expand+0x1c5/0x1f0
Code: 05 16 70 bf 02 01 e8 ca fc ff ff 8b 54 24 34 44 89 e1 48 c7 c7 80 a2 28 83 48 89 c6 b8 01 00 3
RSP: 0018:ffffc90003b2b968 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffffffff83fa9480 RCX: 0000000000000000
RDX: 0000000000000005 RSI: 0000000000000027 RDI: 00000000ffffffff
RBP: 00000000001f2600 R08: 00000000fffeffff R09: 0000000000000001
R10: 0000000000000000 R11: ffffffff83676200 R12: 0000000000000009
R13: 0000000000000200 R14: 0000000000000001 R15: ffffea0007c98000
FS: 00007f72ca3d5780(0000) GS:ffff8881f9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f72ca1fff38 CR3: 00000001aa0c6002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x7b/0x120
? expand+0x1c5/0x1f0
? report_bug+0x191/0x1c0
? handle_bug+0x3c/0x80
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? expand+0x1c5/0x1f0
? expand+0x1c5/0x1f0
__rmqueue_pcplist+0x3a9/0x730
get_page_from_freelist+0x7a0/0xf00
__alloc_pages_noprof+0x153/0x2e0
__folio_alloc_noprof+0x10/0xa0
__filemap_get_folio+0x16b/0x370
iomap_write_begin+0x496/0x680
While trying to service a movable allocation (page type 1), the page
allocator runs into a two-pageblock buddy on the movable freelist whose
second block is typed as highatomic (page type 3).
This inconsistency is caused by the highatomic reservation system
operating on single pageblocks, while MAX_ORDER can be bigger than that -
in this configuration, pageblock_order is 9 while MAX_PAGE_ORDER is 10.
The test case is observed to make several adjacent order-3 requests with
__GFP_DIRECT_RECLAIM cleared, which marks the surrounding block as
highatomic. Upon freeing, the blocks merge into an order-10 buddy. When
the highatomic pool is drained later on, this order-10 buddy gets moved
back to the movable list, but only the first pageblock is marked movable
again. A subsequent expand() of this buddy warns about the tail being of
a different type.
This is a long-standing bug that's surfaced by the recent block type
warnings added to the allocator. The consequences seem mostly benign, it
just results in odd behavior: the highatomic tail blocks are not properly
drained, instead they end up on the movable list first, then go back to
the highatomic list after an alloc-free cycle.
To fix this, make the highatomic reservation code aware that
allocations/buddies can be larger than a pageblock.
While it's an old quirk, the recently added type consistency warnings seem
to be the most prominent consequence of it. Set the Fixes: tag
accordingly to highlight this backporting dependency.
Link: https://lkml.kernel.org/r/20240530114203.GA1222079@cmpxchg.org
Fixes: e0932b6c1f ("mm: page_alloc: consolidate free page accounting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Destructive writes to a block device on which nilfs2 is mounted can cause
a kernel bug in the folio/page writeback start routine or writeback end
routine (__folio_start_writeback in the log below):
kernel BUG at mm/page-writeback.c:3070!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
...
RIP: 0010:__folio_start_writeback+0xbaa/0x10e0
Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff
e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f>
0b e8 1f ca c6 ff 4c 89 f7 48 c7 c6 a0 c6 12 84 e8 d0 b3 0f 00
...
Call Trace:
<TASK>
nilfs_segctor_do_construct+0x4654/0x69d0 [nilfs2]
nilfs_segctor_construct+0x181/0x6b0 [nilfs2]
nilfs_segctor_thread+0x548/0x11c0 [nilfs2]
kthread+0x2f0/0x390
ret_from_fork+0x4b/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
This is because when the log writer starts a writeback for segment summary
blocks or a super root block that use the backing device's page cache, it
does not wait for the ongoing folio/page writeback, resulting in an
inconsistent writeback state.
Fix this issue by waiting for ongoing writebacks when putting
folios/pages on the backing device into writeback state.
Link: https://lkml.kernel.org/r/20240530141556.4411-1-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3 ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The assert was introduced in the commit cited below as an insurance that
the semantic is the same after the local_irq_save() has been removed and
the function has been made static.
The original requirement to disable interrupt was due the modification
of per-CPU counters which require interrupts to be disabled because the
counter update operation is not atomic and some of the counters are
updated from interrupt context.
All callers of __mod_objcg_mlstate() acquire a lock
(memcg_stock.stock_lock) which disables interrupts on !PREEMPT_RT and
the lockdep assert is satisfied. On PREEMPT_RT the interrupts are not
disabled and the assert triggers.
The safety of the counter update is already ensured by
VM_WARN_ON_IRQS_ENABLED() which is part of __mod_memcg_lruvec_state() and
does not require yet another check.
Remove the lockdep assert from __mod_objcg_mlstate().
Link: https://lkml.kernel.org/r/20240528141341.rz_rytN_@linutronix.de
Fixes: 91882c1617 ("memcg: simple cleanup of stats update functions")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We are passing a huge nr to __clear_young_dirty_ptes() right now. While
we should pass the number of pages, we are actually passing CONT_PTE_SIZE.
This is causing lots of crashes of MADV_FREE, panic oops could vary
everytime.
Link: https://lkml.kernel.org/r/20240524005444.135417-1-21cnbao@gmail.com
Fixes: 89e86854fb ("mm/arm64: override clear_young_dirty_ptes() batch helper")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Lance Yang <ioworker0@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Jeff Xie <xiehuan09@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
if CONFIG_SYSFS is not enabled in config, we get the below error,
All errors (new ones prefixed by >>):
s390-linux-ld: mm/memory.o: in function `count_mthp_stat':
>> include/linux/huge_mm.h:285:(.text+0x191c): undefined reference to `mthp_stats'
s390-linux-ld: mm/huge_memory.o:(.rodata+0x10): undefined reference to `mthp_stats'
vim +285 include/linux/huge_mm.h
279
280 static inline void count_mthp_stat(int order, enum mthp_stat_item item)
281 {
282 if (order <= 0 || order > PMD_ORDER)
283 return;
284
> 285 this_cpu_inc(mthp_stats.stats[order][item]);
286 }
287
Link: https://lkml.kernel.org/r/20240523210045.40444-1-21cnbao@gmail.com
Fixes: ec33687c67 ("mm: add per-order mTHP anon_fault_alloc and anon_fault_fallback counters")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405231728.tCAogiSI-lkp@intel.com/
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mTHP swap related counters: 'anon_swpout' and 'anon_swpout_fallback'
are confusing with an 'anon_' prefix, since the shmem can swap out
non-anonymous pages. So drop the 'anon_' prefix to keep consistent with
the old swap counter names.
This is needed in 6.10-rcX to avoid having an inconsistent ABI out in the
field.
Link: https://lkml.kernel.org/r/7a8989c13299920d7589007a30065c3e2c19f0e0.1716431702.git.baolin.wang@linux.alibaba.com
Fixes: d0f048ac39 ("mm: add per-order mTHP anon_swpout and anon_swpout_fallback counters")
Fixes: 42248b9d34 ("mm: add docs for per-order mTHP counters and transhuge_page ABI")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drm_crtc_helper_funcs::atomic_disable can be called even when the CRTC is
still enabled. This can occur when the mode changes or the CRTC is set as
inactive.
In the case where the CRTC is being set as inactive we only want to
blank the screen. The Screen Target should remain intact as long as the
mode has not changed and CRTC is enabled.
This fixes a bug with GDM where locking the screen results in a permanent
black screen because the Screen Target is no longer defined.
Fixes: 7b0062036c ("drm/vmwgfx: Implement virtual crc generation")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531203358.26677-1-ian.forbes@broadcom.com
This limit became a hard cap starting with the change referenced below.
Surface creation on the device will fail if the requested size is larger
than this limit so altering the value arbitrarily will expose modes that
are too large for the device's hard limits.
Fixes: 7ebb47c9f9 ("drm/vmwgfx: Read new register for GB memory when available")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-3-ian.forbes@broadcom.com
SVGA requires individual surfaces to fit within graphics memory
(max_mob_pages) which means that modes with a final buffer size that would
exceed graphics memory must be pruned otherwise creation will fail.
Additionally llvmpipe requires its buffer height and width to be a multiple
of its tile size which is 64. As a result we have to anticipate that
llvmpipe will round up the mode size passed to it by the compositor when
it creates buffers and filter modes where this rounding exceeds graphics
memory.
This fixes an issue where VMs with low graphics memory (< 64MiB) configured
with high resolution mode boot to a black screen because surface creation
fails.
Fixes: d947d1b71d ("drm/vmwgfx: Add and connect connector helper function")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-2-ian.forbes@broadcom.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmAYPgAKCRDbK58LschI
g2XdAP9M8zYLRw4IG8DUFug7F+oqRPqgbs+Gvsf9YNl5/PSiTQEA6WKa/ObaG/W9
vre9VxhMWKgcMfzqZyztNHAiDm8R+QI=
=l7gV
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-05
We've added 8 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 34 insertions(+), 35 deletions(-).
The main changes are:
1) Fix a potential use-after-free in bpf_link_free when the link uses
dealloc_deferred to free the link object but later still tests for
presence of link->ops->dealloc, from Cong Wang.
2) Fix BPF test infra to set the run context for rawtp test_run callback
where syzbot reported a crash, from Jiri Olsa.
3) Fix bpf_session_cookie BTF_ID in the special_kfunc_set list to exclude
it for the case of !CONFIG_FPROBE, also from Jiri Olsa.
4) Fix a Coverity static analysis report to not close() a link_fd of -1
in the multi-uprobe feature detector, from Andrii Nakryiko.
5) Revert support for redirect to any xsk socket bound to the same umem
as it can result in corrupted ring state which can lead to a crash when
flushing rings. A different approach will be pursued for bpf-next to
address it safely, from Magnus Karlsson.
6) Fix inet_csk_accept prototype in test_sk_storage_tracing.c which caused
BPF CI failure after the last tree fast forwarding, from Andrii Nakryiko.
7) Fix a coccicheck warning in BPF devmap that iterator variable cannot
be NULL, from Thorsten Blum.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
Revert "xsk: Document ability to redirect to any socket bound to the same umem"
Revert "xsk: Support redirect to any socket bound to the same umem"
bpf: Set run context for rawtp test_run callback
bpf: Fix a potential use-after-free in bpf_link_free()
bpf, devmap: Remove unnecessary if check in for loop
libbpf: don't close(-1) in multi-uprobe feature detector
bpf: Fix bpf_session_cookie BTF_ID in special_kfunc_set list
selftests/bpf: fix inet_csk_accept prototype in test_sk_storage_tracing.c
====================
Link: https://lore.kernel.org/r/20240605091525.22628-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pid filtering test will set the pid filters and make sure that both
function and function_graph tracing honors the filters. But the
function_graph tracer test was failing because the PID was not being
filtered properly. That's because the funcgraph-proc option wasn't getting
set. Without that option the PID is not shown.
Instead we get:
+ cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
3) ! 143.685 us | kernel_clone();
3) ! 127.055 us | kernel_clone();
1) ! 127.170 us | kernel_clone();
3) ! 126.840 us | kernel_clone();
When we should be getting:
+ cat trace
# tracer: function_graph
#
# CPU TASK/PID DURATION FUNCTION CALLS
# | | | | | | | | |
4) bash-939 | # 1070.009 us | kernel_clone();
4) bash-939 | # 1116.903 us | kernel_clone();
5) bash-939 | ! 976.133 us | kernel_clone();
5) bash-939 | ! 954.012 us | kernel_clone();
The test looks for the pids it is filtering and will fail if it can not
find them. Without fungraph-proc option set, it will not be displayed and
the test will fail.
Link: https://lore.kernel.org/all/Zl9JFnzKGuUM10X2@J2N7QTR9R3/
Link: https://lore.kernel.org/linux-trace-kernel/20240604152550.0c01d7cd@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35b944a997 ("selftests/ftrace: Add function_graph tracer to func-filter-pid test")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
The test is trying to push the heartbeat frequency to the limit, which
might sometimes fail. Such a failure does not provide valuable
information, because it does not indicate that there is something
necessarily wrong with either the driver or the hardware.
Remove the test to prevent random, unnecessary failures from appearing
in CI.
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Niemiec, Krzysztof <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe2vu5h7v7ooxbhwpbfsypxg5mjrnt56gc3cgrqpnhgrgce334@qfrv2skxrp47
The update to the ops trampoline done by the function
ftrace_update_trampoline() was accidentally removed from
ftrace_update_pid_func(). Add it back.
Link: https://lore.kernel.org/linux-trace-kernel/20240605205337.6115e9a5@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: df3ec5da6a ("function_graph: Add pid tracing back to function graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Following the guidelines it takes 3 seconds to perform an FLR
reset. Let's give it a bit more slack because this time can
change depending on the platform and on the firmware
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240523235853.171796-1-andi.shyti@linux.intel.com
There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:
BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas
Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965
For full log, please look at [1].
Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.
[1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/
Fixes: c696f7b83e ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path")
Cc: stable@vger.kernel.org
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240605085530.499432-1-leitao@debian.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 321da3dc1f ("scsi: sd: usb_storage: uas: Access media prior
to querying device properties") triggered a read to LBA 0 before
attempting to inquire about device characteristics. This was done
because some protocol bridge devices will return generic values until
an attached storage device's media has been accessed.
Pierre Tomon reported that this change caused problems on a large
capacity external drive connected via a bridge device. The bridge in
question does not appear to implement the READ(10) command.
Issue a READ(16) instead of READ(10) when a device has been identified
as preferring 16-byte commands (use_16_for_rw heuristic).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218890
Link: https://lore.kernel.org/r/70dd7ae0-b6b1-48e1-bb59-53b7c7f18274@rowland.harvard.edu
Link: https://lore.kernel.org/r/20240605022521.3960956-1-martin.petersen@oracle.com
Fixes: 321da3dc1f ("scsi: sd: usb_storage: uas: Access media prior to querying device properties")
Cc: stable@vger.kernel.org
Reported-by: Pierre Tomon <pierretom+12@ik.me>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Pierre Tomon <pierretom+12@ik.me>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On failed verification of PTP clock pin, error message prints channel
number instead of pin index after "pin", which is incorrect.
Fix error message by adding channel number to the message and printing
pin number instead of channel number.
Fixes: 6092315dfd ("ptp: introduce programmable pins.")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20240604120555.16643-1-karol.kolacinski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ronak Doshi says:
====================
vmxnet3: upgrade to version 9
vmxnet3 emulation has recently added timestamping feature which allows the
hypervisor (ESXi) to calculate latency from guest virtual NIC driver to all
the way up to the physical NIC. This patch series extends vmxnet3 driver
to leverage these new feature.
Compatibility is maintained using existing vmxnet3 versioning mechanism as
follows:
- new features added to vmxnet3 emulation are associated with new vmxnet3
version viz. vmxnet3 version 9.
- emulation advertises all the versions it supports to the driver.
- during initialization, vmxnet3 driver picks the highest version number
supported by both the emulation and the driver and configures emulation
to run at that version.
In particular, following changes are introduced:
Patch 1:
This patch introduces utility macros for vmxnet3 version 9 comparison
and updates Copyright information.
Patch 2:
This patch adds support to timestamp the packets so as to allow latency
measurement in the ESXi.
Patch 3:
This patch adds support to disable certain offloads on the device based
on the request specified by the user in the VM configuration.
Patch 4:
With all vmxnet3 version 9 changes incorporated in the vmxnet3 driver,
with this patch, the driver can configure emulation to run at vmxnet3
version 9.
====================
Link: https://lore.kernel.org/r/20240531193050.4132-1-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With all vmxnet3 version 9 changes incorporated in the vmxnet3 driver,
the driver can configure emulation to run at vmxnet3 version 9, provided
the emulation advertises support for version 9.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240531193050.4132-5-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new command to disable certain offloads. This
allows user to specify, using VM configuration, if certain offloads
need to be disabled.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240531193050.4132-4-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances vmxnet3 to support latency measurement.
This support will help to track the latency in packet processing
between guest virtual nic driver and host. For this purpose, we
introduce a new timestamp ring in vmxnet3 which will be per Tx/Rx
queue. This ring will be used to carry timestamp of the packets
which will be used to calculate the latency.
User can enable latency measurement using realtime knob in vnic
setting in VCenter.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240531193050.4132-3-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vmxnet3 is currently at version 7 and this patch initiates the
preparation to accommodate changes for up to version 9. Introduced
utility macros for vmxnet3 version 9 comparison and update Copyright
information.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240531193050.4132-2-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided,
taprio_parse_mqprio_opt() must validate it, or userspace
can inject arbitrary data to the kernel, the second time
taprio_change() is called.
First call (with valid attributes) sets dev->num_tc
to a non zero value.
Second call (with arbitrary mqprio attributes)
returns early from taprio_parse_mqprio_opt()
and bad things can happen.
Fixes: a3d43c0d56 ("taprio: Add support adding an admin schedule")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240604181511.769870-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function dp_wait_hpd_asserted() uses pm_runtime_get_sync() and
doesn't care about the return value. Potentially this can lead to
unclocked access if for some reason resuming of the DP controller fails.
Change the function to use pm_runtime_resume_and_get() and return an
error if resume fails.
Fixes: e2969ee302 ("drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/580137/
Link: https://lore.kernel.org/r/20240226223446.4194079-1-dmitry.baryshkov@linaro.org
[quic_abhinavk@quicinc.com: resolved trivial conflict while rebase]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
There are duplicate items in wb2_formats_rgb and wb2_formats_rgb_yuv,
which cause weston assertions failed.
weston: libweston/drm-formats.c:131: weston_drm_format_array_add_format:
Assertion `!weston_drm_format_array_find_format(formats, format)' failed.
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: 8c16b988ba ("drm/msm/dpu: introduce separate wb2_format arrays for rgb and yuv")
Fixes: 53324b99bd ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/596847/
Link: https://lore.kernel.org/r/20240524150128.1878297-2-bigfoot@classfun.cn
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the DPU driver blank IRQ handling is called from a vblank worker and
can happen outside of the irq_enable / irq_disable pair. Using the
worker makes that completely asynchronous with the rest of the code.
Revert commit d13f638c9b ("drm/msm/dpu: drop
dpu_encoder_phys_ops.atomic_mode_set") to fix vblank IRQ assignment for
CMD DSI panels.
Call trace:
dpu_encoder_phys_cmd_control_vblank_irq+0x218/0x294
dpu_encoder_toggle_vblank_for_crtc+0x160/0x194
dpu_crtc_vblank+0xbc/0x228
dpu_kms_enable_vblank+0x18/0x24
vblank_ctrl_worker+0x34/0x6c
process_one_work+0x218/0x620
worker_thread+0x1ac/0x37c
kthread+0x114/0x118
ret_from_fork+0x10/0x20
Fixes: d13f638c9b ("drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/595065/
Link: https://lore.kernel.org/r/20240522-dpu-revert-ams-v2-1-b37825d708e1@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The irq_idx is unsigned so it cannot be lower than zero, better
to change the condition to check if it is equal with zero.
It could not cause any issue because a valid irq index starts from one.
Fixes: 5a9d50150c ("drm/msm/dpu: shift IRQ indices by 1")
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596853/
Link: https://lore.kernel.org/r/20240509-irq_wait-v2-1-b8b687b22cc4@gmail.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Current ionic devices only support 52 internal physical address
lines. This is sufficient for x86_64 systems which have similar
limitations but does not apply to all other architectures,
notably IBM POWER (ppc64). To ensure that MSI/MSI-X vectors are
not set outside the physical address limits of the NIC, set the
no_64bit_msi value of the pci_dev structure during device probe.
Signed-off-by: David Christensen <drc@linux.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240603212747.1079134-1-drc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, Smack mirrors the label of incoming tcp/ipv4 connections:
when a label 'foo' connects to a label 'bar' with tcp/ipv4,
'foo' always gets 'foo' in returned ipv4 packets. So,
1) returned packets are incorrectly labeled ('foo' instead of 'bar')
2) 'bar' can write to 'foo' without being authorized to write.
Here is a scenario how to see this:
* Take two machines, let's call them C and S,
with active Smack in the default state
(no settings, no rules, no labeled hosts, only builtin labels)
* At S, add Smack rule 'foo bar w'
(labels 'foo' and 'bar' are instantiated at S at this moment)
* At S, at label 'bar', launch a program
that listens for incoming tcp/ipv4 connections
* From C, at label 'foo', connect to the listener at S.
(label 'foo' is instantiated at C at this moment)
Connection succeedes and works.
* Send some data in both directions.
* Collect network traffic of this connection.
All packets in both directions are labeled with the CIPSO
of the label 'foo'. Hence, label 'bar' writes to 'foo' without
being authorized, and even without ever being known at C.
If anybody cares: exactly the same happens with DCCP.
This behavior 1st manifested in release 2.6.29.4 (see Fixes below)
and it looks unintentional. At least, no explanation was provided.
I changed returned packes label into the 'bar',
to bring it into line with the Smack documentation claims.
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Fix issues related to the handling of invalid trip points in the thermal
core and in the thermal debug code that have been overlooked by some
recent thermal control core changes.
-----BEGIN PGP SIGNATURE-----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=uz/z
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix issues related to the handling of invalid trip points in the
thermal core and in the thermal debug code that have been overlooked
by some recent thermal control core changes"
* tag 'thermal-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: trip: Trigger trip down notifications when trips involved in mitigation become invalid
thermal: core: Introduce thermal_trip_crossed()
thermal/debugfs: Allow tze_seq_show() to print statistics for invalid trips
thermal/debugfs: Print initial trip temperature and hysteresis in tze_seq_show()
- Fix error handling during EC operation region accesses in the ACPI EC
driver (Armin Wolf).
- Fix a memory leak in the APEI error injection driver introduced
during its converion to a platform driver (Dan Williams).
- Fix build failures related to the dev_is_pnp() macro by redefining it
as a proper function and exporting it to modules as appropriate and
unexport pnp_bus_type which need not be exported any more (Andy
Shevchenko).
- Update the ACPI AC driver to use power_supply_changed() to let the
power supply core handle configuration changes properly (Thomas
Weißschuh).
-----BEGIN PGP SIGNATURE-----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=j7lP
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the ACPI EC and AC drivers, the ACPI APEI error injection
driver and build issues related to the dev_is_pnp() macro referring to
pnp_bus_type that is not exported to modules.
Specifics:
- Fix error handling during EC operation region accesses in the ACPI
EC driver (Armin Wolf)
- Fix a memory leak in the APEI error injection driver introduced
during its converion to a platform driver (Dan Williams)
- Fix build failures related to the dev_is_pnp() macro by redefining
it as a proper function and exporting it to modules as appropriate
and unexport pnp_bus_type which need not be exported any more (Andy
Shevchenko)
- Update the ACPI AC driver to use power_supply_changed() to let the
power supply core handle configuration changes properly (Thomas
Weißschuh)"
* tag 'acpi-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: AC: Properly notify powermanagement core about changes
PNP: Hide pnp_bus_type from the non-PNP code
PNP: Make dev_is_pnp() to be a function and export it for modules
ACPI: EC: Avoid returning AE_OK on errors in address space handler
ACPI: EC: Abort address space access upon error
ACPI: APEI: EINJ: Fix einj_dev release leak
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada).
- Add missing conversion from MHz to KHz to amd_pstate_set_boost()
to address sysfs inteface inconsistency and fix P-state frequency
reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
Ugwekar).
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann).
-----BEGIN PGP SIGNATURE-----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=lugn
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the intel_pstate and amd-pstate cpufreq drivers and the
cpupower utility.
Specifics:
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada)
- Add missing conversion from MHz to KHz to amd_pstate_set_boost() to
address sysfs inteface inconsistency and fix P-state frequency
reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
Ugwekar)
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann)"
* tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix unchecked HWP MSR access
cpufreq: amd-pstate: Fix the inconsistency in max frequency units
cpufreq: amd-pstate: remove global header file
tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs
If we ever meet a hardware that uses weird register bits and padding,
we may end up in off-by-one error since x/8 + y/8 might not be equal
to (x + y)/8 in some cases.
bits pad x/8+y/8 (x+y)/8
4..7 0..3 0 0 // x + y from 4 up to 7
4..7 4..7 0 1 // x + y from 8 up to 11
4..7 8..11 1 1 // x + y from 12 up to 15
8..15 0..7 1 1 // x + y from 8 up to 15
8..15 8..15 2 2 // x + y from 16 up to 23
Fix this by using (x+y)/8.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://msgid.link/r/20240605205315.19132-1-andy.shevchenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
atomic_dec_if_positive returns new value regardless if it is updated or
not. The commit in fixes changed the behavior of the condition to one
that differs from original code. Restore original condition to properly
maintain atomic counter.
Fixes: 165f87691a ("bnxt_en: add timestamping statistics support")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240604091939.785535-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
