According to RFC 1213, we should also take CLOSE-WAIT sockets into
consideration:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
After this, CurrEstab counter will display the total number of
ESTABLISHED and CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) if we change the state to ESTABLISHED.
b) if we change the state from SYN-RECEIVED to CLOSE-WAIT.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Please note: there are two chances that old state of socket can be changed
to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED.
So we have to take care of the former case.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These fields can be read and written locklessly, add annotations
around these minor races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to dump NIX transmit queue topology.
There are multiple levels of scheduling/shaping supported by
NIX and a packet traverses through multiple levels before sending
the packet out. At each level, there are set of scheduling/shaping
rules applied to a packet flow.
Each packet traverses through multiple levels
SQ->SMQ->TL4->TL3->TL2->TL1 and these levels are mapped in a parent-child
relationship.
This patch dumps the debug information related to all TM Levels in
the following way.
Example:
$ echo <nixlf> > /sys/kernel/debug/octeontx2/nix/tm_tree
$ cat /sys/kernel/debug/octeontx2/nix/tm_tree
A more desriptive set of registers at each level can be dumped
in the following way.
Example:
$ echo <nixlf> > /sys/kernel/debug/octeontx2/nix/tm_topo
$ cat /sys/kernel/debug/octeontx2/nix/tm_topo
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary use of the address operator.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Drop the second snapshot of mmu_invalidate_seq in kvm_faultin_pfn().
Before checking the mismatch of private vs. shared, mmu_invalidate_seq is
saved to fault->mmu_seq, which can be used to detect an invalidation
related to the gfn occurred, i.e. KVM will not install a mapping in page
table if fault->mmu_seq != mmu_invalidate_seq.
Currently there is a second snapshot of mmu_invalidate_seq, which may not
be same as the first snapshot in kvm_faultin_pfn(), i.e. the gfn attribute
may be changed between the two snapshots, but the gfn may be mapped in
page table without hindrance. Therefore, drop the second snapshot as it
has no obvious benefits.
Fixes: f6adeae81f ("KVM: x86/mmu: Handle no-slot faults at the beginning of kvm_faultin_pfn()")
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20240528102234.2162763-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Large set of FP/SVE fixes for pKVM, addressing the fallout
from the per-CPU data rework and making sure that the host
is not involved in the FP/SVE switching any more
- Allow FEAT_BTI to be enabled with NV now that FEAT_PAUTH
is copletely supported
- Fix for the respective priorities of Failed PAC, Illegal
Execution state and Instruction Abort exceptions
- Fix the handling of AArch32 instruction traps failing their
condition code, which was broken by the introduction of
ESR_EL2.ISS2
- Allow vpcus running in AArch32 state to be restored in
System mode
- Fix AArch32 GPR restore that would lose the 64 bit state
under some conditions
-----BEGIN PGP SIGNATURE-----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=Yc2U
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.10, take #1
- Large set of FP/SVE fixes for pKVM, addressing the fallout
from the per-CPU data rework and making sure that the host
is not involved in the FP/SVE switching any more
- Allow FEAT_BTI to be enabled with NV now that FEAT_PAUTH
is copletely supported
- Fix for the respective priorities of Failed PAC, Illegal
Execution state and Instruction Abort exceptions
- Fix the handling of AArch32 instruction traps failing their
condition code, which was broken by the introduction of
ESR_EL2.ISS2
- Allow vpcus running in AArch32 state to be restored in
System mode
- Fix AArch32 GPR restore that would lose the 64 bit state
under some conditions
The function run_all_insn_set_hw_mode() is registered as startup callback
of 'CPUHP_AP_ARM64_ISNDEP_STARTING', it invokes set_hw_mode() methods of
all emulated instructions.
As the STARTING callbacks are not expected to fail, if one of the
set_hw_mode() fails, e.g. due to el0 mixed-endian is not supported for
'setend', it will report a warning:
```
CPU[2] cannot support the emulation of setend
CPU 2 UP state arm64/isndep:starting (136) failed (-22)
CPU2: Booted secondary processor 0x0000000002 [0x414fd0c1]
```
To fix it, add a check for INSN_UNAVAILABLE status and skip the process.
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20240423093501.3460764-1-liwei391@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Set flag GENPD_FLAG_ACTIVE_WAKEUP to scmi genpd, then when a device
is set as wakeup source using device_set_wakeup_enable, the power
domain could be kept on to make sure the device could wakeup the system.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240514131833.911703-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
hsr_redbox.sh test need to create bridge for testing. Add the missing
config CONFIG_BRIDGE in config file.
Fixes: eafbf0574e ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f58f45c1e5 ("vxlan: drop packets from invalid src-address")
has recently been added to vxlan mainly in the context of source
address snooping/learning so that when it is enabled, an entry in the
FDB is not being created for an invalid address for the corresponding
tunnel endpoint.
Before commit f58f45c1e5 vxlan was similarly behaving as geneve in
that it passed through whichever macs were set in the L2 header. It
turns out that this change in behavior breaks setups, for example,
Cilium with netkit in L3 mode for Pods as well as tunnel mode has been
passing before the change in f58f45c1e5 for both vxlan and geneve.
After mentioned change it is only passing for geneve as in case of
vxlan packets are dropped due to vxlan_set_mac() returning false as
source and destination macs are zero which for E/W traffic via tunnel
is totally fine.
Fix it by only opting into the is_valid_ether_addr() check in
vxlan_set_mac() when in fact source address snooping/learning is
actually enabled in vxlan. This is done by moving the check into
vxlan_snoop(). With this change, the Cilium connectivity test suite
passes again for both tunnel flavors.
Fixes: f58f45c1e5 ("vxlan: drop packets from invalid src-address")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Bauer <mail@david-bauer.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
q->bands will be assigned to qopt->bands to execute subsequent code logic
after kmalloc. So the old q->bands should not be used in kmalloc.
Otherwise, an out-of-bounds write will occur.
Fixes: c2999f7fb0 ("net: sched: multiq: don't call qdisc_put() while holding tree lock")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for A4 power controller. A4 power control
registers are in secure domain, and should be accessed by SMC.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240529-a4_secpowerdomain-v2-2-47502fc0eaf3@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
I need a scratch register which fill the following requirements:
- can be accessed via DSB
- all the bits can be read/written
- no serious side effects
So far the only thing I could think of is the "expected CRC"
register. Add the definition so I can use it.
While I only need the hsw+ variant currently, let's define the
older variants as well for completeness.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-7-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
On hsw+ we only have one CRC result register, instead of the
five we have on ivb, and some of the others have been repurposed
to serve other CRC related purposes.
Since the hsw+ vs. pre-hsw register operate quite differently
let's add a separate definition for the hsw+ variant to make the
situation a bit more clear. Also since we only use this from a
hsw+ codepath there is no real benefit to be had with reusing
the ivb register definition.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
PIPE_CRC_RES_*_IVB are proper pipe registers, and only valid
for IVB+ where pipe register blocks are equally spaced, so we
can switch from _MMIO_TRANS2() to the simpler _MMIO_PIPE() for
these.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Allow the caller of intel_dsb_prepare() to determine which DSB
engine (out of the three possible per pipe) to use. This will
let us utilize multiple DSB engines during the same commit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Namespace the DSB ID enum properly, and make the naming match
other such enums in general. Also make the names 0 based as
that's what Bspec uses for DSB (unlike eg. planes where it
uses 1 based indexing).
We'll throw out INVALID_DSB while at it since we have no use for
it at the moment.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Christophe JAILLET says:
====================
devlink: Constify struct devlink_dpipe_table_ops
Patch 1 updates devl_dpipe_table_register() and struct
devlink_dpipe_table to accept "const struct devlink_dpipe_table_ops".
Then patch 2 updates the only user of this function.
This is compile tested only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
'struct devlink_dpipe_table_ops' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15557 712 0 16269 3f8d drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.o
After:
=====
text data bss dec hex filename
15789 488 0 16277 3f95 drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"struct devlink_dpipe_table_ops" only contains some function pointers.
Update "struct devlink_dpipe_table" and the 'table_ops' parameter of
devl_dpipe_table_register() so that structures in drivers can be
constified.
Constifying these structures will move some data to a read-only section, so
increase overall security.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dma_heap_allocation_data defines the UAPI as follows:
struct dma_heap_allocation_data {
__u64 len;
__u32 fd;
__u32 fd_flags;
__u64 heap_flags;
};
However, dma_heap_buffer_alloc() casts both fd_flags and heap_flags
into unsigned int. We're inconsistent with types in the non UAPI
arguments. This patch fixes it.
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605012605.5341-1-21cnbao@gmail.com
Aquantia Ethernet PHYs got 3 LED output pins which are typically used
to indicate link status and activity.
Add a minimal LED controller driver supporting the most common uses
with the 'netdev' trigger as well as software-driven forced control of
the LEDs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[ rework indentation, fix checkpatch error and improve some functions ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for LEDs support, move priv and hw stat to header to
reference priv struct also in other .c outside aquantia.main
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
'cable_test_tdr_req_info' is unused since the original
commit f2bc8ad31a ("net: ethtool: Allow PHY cable test TDR data to
configured").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DT compatible string for DH electronics STM32MP13xx DHCOR SoM and
DHSBC carrier board. This stm32mp135f-dhcor-dhsbc board is a stack of
DHCOR SoM based on STM32MP135F SoC (900MHz / crypto capabilities)
populated on DHSBC carrier board.
The SoM contains the following peripherals:
- STPMIC (power delivery)
- 512MB DDR3L memory
- eMMC and SDIO WiFi module
The DHSBC carrier board contains the following peripherals:
- Two RGMII Ethernet ports
- USB-A Host port, USB-C peripheral port, USB-C power supply plug
- Expansion connector
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
'cfpktq' has been unused since
commit 73d6ac633c ("caif: code cleanup").
'caif_packet_funcs' is declared but never defined.
Remove both of them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I was doing some experiments, I found that when using the first
parameter, namely, struct net, in ip_metrics_convert() always triggers NULL
pointer crash. Then I digged into this part, realizing that we can remove
this one due to its uselessness.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch complains:
net/bridge/br_netlink_tunnel.c:
318 br_process_vlan_tunnel_info() warn: inconsistent indenting
Fix it with a proper indenting
Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata. This worked in 5.0 kernel but not in newer kernels. The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning. This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.
Fixes: 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This rewrites the Vitesse VSC73xx DSA switches DT binding in
schema.
It was a bit tricky since I needed to come up with some way
of applying the SPI properties only on SPI devices and not
platform devices, but I figured something out that works.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the OSD32MP1 Power System overview[1] pwr_regulators;
vdd-supply and vdd_3v3_usbfs-supply are hard-wired internally in
the SIP module to vdd and ldo4.
[1]:
https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Move static const array into the source file to fix the "defined but not
used" errors.
The fix is perhaps not the prettiest due hand crafting the array sizes
in v3d_performance_counters.h, but I did add some build time asserts to
validate the counts look sensible, so hopefully it is good enough for a
quick fix.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 3cbcbe016c ("drm/v3d: Add Performance Counters descriptions for V3D 4.2 and 7.1")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405211137.hueFkLKG-lkp@intel.com/Cc: Maíra Canal <mcanal@igalia.com>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604160210.24073-1-tursulin@igalia.com
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf
to sysctl_tcp_wmem[1], since this may overwrite the value set by
tcp_sndbuf_expand() in TCP connection establishment.
And the other setting sk_{snd|rcv}buf to sysctl value in
smc_adjust_sock_bufsizes() can also be omitted since the initialization
of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem
or ipv4_sysctl_tcp_{w|r}mem[1].
Fixes: 30c3c4a449 ("net/smc: Use correct buffer sizes when switching between TCP and SMC")
Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too.
Signed-off-by: David S. Miller <davem@davemloft.net>
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.
Fixes: 7df5b4b260 ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
STM32MP15xx RM0436 Rev 6 section 46.3 System timer generator (STGEN) states
"
Arm recommends that the system counter is in an always-on power domain.
This is not supported in the current implementation, therefore STGEN should
be saved and restored before Standby mode entry, and restored at Standby
exit by secure software.
...
"
Instead of piling up workarounds in the firmware which is difficult to
update, add "arm,no-tick-in-suspend" DT property into the timer node to
indicate the timer is stopped in suspend, and let the kernel fix the
timer up.
Fixes: 8471a20253 ("ARM: dts: stm32: add stm32mp157c initial support")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
udf_evict_inode() calls udf_setsize() to truncate deleted inode.
However inode deletion through udf_evict_inode() can happen from inode
reclaim context and udf_setsize() grabs mapping->invalidate_lock which
isn't generally safe to acquire from fs reclaim context since we
allocate pages under mapping->invalidate_lock for example in a page
fault path. This is however not a real deadlock possibility as by the
time udf_evict_inode() is called, nobody can be accessing the inode,
even less work with its page cache. So this is just a lockdep triggering
false positive. Fix the problem by moving mapping->invalidate_lock
locking outsize of udf_setsize() into udf_setattr() as grabbing
mapping->invalidate_lock from udf_evict_inode() is pointless.
Reported-by: syzbot+0333a6f4b88bcd68a62f@syzkaller.appspotmail.com
Fixes: b9a861fd52 ("udf: Protect truncate and file type conversion with invalidate_lock")
Signed-off-by: Jan Kara <jack@suse.cz>
udf_setsize() checks for IS_IMMUTABLE and IS_APPEND flags. This is
however pointless as UDF does not have capability to store these flags
and never allows to set them. Furthermore this is the only place in UDF
code that was actually checking these flags. Remove the pointless check.
Signed-off-by: Jan Kara <jack@suse.cz>
