Jacob Keller says:
====================
ice: Introduce ETH56G PHY model for E825C products
E825C products have a different PHY model than E822, E823 and E810 products.
This PHY is ETH56G and its support is necessary to have functional PTP stack
for E825C products.
This series refactors the ice driver to add support for the new PHY model.
Karol introduces the ice_ptp_hw structure. This is used to replace some
hard-coded values relating to the PHY quad and port numbers, as well as to
hold the phy_model type.
Jacob refactors the driver code that converts between the ice_ptp_tmr_cmd
enumeration and hardware register values to better re-use logic and reduce
duplication when introducing another PHY type.
Sergey introduces functions to help enable and disable the Tx timestamp
interrupts. This makes the ice_ptp.c code more generic and encapsulates the
PHY specifics into ice_ptp_hw.c
Karol introduces helper functions to clear the valid bits for Tx and Rx
timestamps. This enables informing hardware to discard stale timestamps
after performing clock operations.
Sergey moves the Clock Generation Unit (CGU) logic out of the E822 specific
area of the ice_ptp_hw.c file as it will be re-used for other device PHY
models.
Jacob introduces a helper function for obtaining the base increment values,
moving this logic out of ice_ptp.c and into the ice_ptp_hw.c file to better
encapsulate hardware differences.
Sergey builds on these refactors to introduce the new ETH56G PHY model used
by the E825C products. This includes introducing the required helpers,
constants, and PHY model checks.
Karol simplifies the CGU logic by using anonymous structures, dropping an
unnecessary ".field" name for accessing the CGU data.
Michal Michalik updates the CGU logic to support the E825C hardware,
ensuring that the clock generation is configured properly.
Grzegorz Nitka adds support to read the NAC topology data from the device.
This is in preparation for supporting devices which combine two NACs
together, connecting all ports to the same clock source. This enables the
driver to determine if its operating on such a device, or if its operating
on the standard 1-NAC configuration.
Grzsecgorz Nitka adjusts the PTP initialization to prepare for the 2x50G
E825C devices, introducing special mapping for the PHY ports to prepare for
support of the 2-NAC devices.
With this, the ice driver is capable of handling PTP for the single-NAC
E825C devices. Complete support for the 2-NAC devices requirs some work on
how the ports connect to the clock owner. During review of this work, it
was pointed out that our existing use of auxiliary bus is disliked, and
Jiri requested that we change it. We are currently working on developing a
replacement solution for the auxiliary bus implementation and have dropped
the relevant changes out of this series. A future series will refactor the
port to clock connection, at which time we will finish the support for
2-NAC E825C devices.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-0-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
>From FW/HW perspective, 2 port topology in E825C devices requires
merging of 2 port mapping internally and breakout mapping externally.
As a consequence, it requires different port numbering from PTP code
perspective.
For that topology, pf_id can not be used to index PTP ports. Even if
the 2nd port is identified as port with pf_id = 1, all PHY operations
need to be performed as it was port 2. Thus, special mapping is needed
for the 2nd port.
This change adds detection of 2x50G topology and applies 'custom'
mapping on the 2nd port.
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-11-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new device capability ICE_AQC_CAPS_NAC_TOPOLOGY which allows to
determine the mode of operation (1 or 2 NAC).
Define a new structure to store data from new capability and
corresponding parser code.
Co-developed-by: Prathisna Padmasanan <prathisna.padmasanan@intel.com>
Signed-off-by: Prathisna Padmasanan <prathisna.padmasanan@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Pawel Kaminski <pawel.kaminski@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-10-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CGU layout of E825-C is a little different than E822/E823. Add
support the new hardware adding relevant functions.
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-9-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
E825C products feature a new PHY model - ETH56G.
Introduces all necessary PHY definitions, functions etc. for ETH56G PHY,
analogous to E82X and E810 ones with addition of a few HW-specific
functionalities for ETH56G like one-step timestamping.
It ensures correct PTP initialization and operation for E825C products.
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-7-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new helper for getting base clock increment value for specific HW.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-6-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a possibility to mark all transmitted/received timestamps as invalid
by clearing PHY OFFSET_READY registers.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-4-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multiple places in the driver code need to convert enum ice_ptp_tmr_cmd
values into register bits for both the main timer and the PHY port
timers. The main MAC register has one bit scheme for timer commands,
while the PHY commands use a different scheme.
The E810 and E830 devices use the same scheme for port commands as used
for the main timer. However, E822 and ETH56G hardware has a separate
scheme used by the PHY.
Introduce helper functions to convert the timer command enumeration into
the register values, reducing some code duplication, and making it
easier to later refactor the individual port write commands.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-2-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create new ice_ptp_hw struct and use it for all HW and PTP-related
fields from struct ice_hw.
Replace definitions with struct fields, which values are set accordingly
to a specific device.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-1-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The object "ax25_dev" is managed by reference counting. Thus it should
not be directly released by kfree(), replace with ax25_dev_put().
Fixes: d01ffb9eee ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240530051733.11416-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When releasing a socket in ax25_release(), we call netdev_put() to
decrease the refcount on the associated ax.25 device. However, the
execution path for accepting an incoming connection never calls
netdev_hold(). This imbalance leads to refcount errors, and ultimately
to kernel crashes.
A typical call trace for the above situation will start with one of the
following errors:
refcount_t: decrement hit 0; leaking memory.
refcount_t: underflow; use-after-free.
And will then have a trace like:
Call Trace:
<TASK>
? show_regs+0x64/0x70
? __warn+0x83/0x120
? refcount_warn_saturate+0xb2/0x100
? report_bug+0x158/0x190
? prb_read_valid+0x20/0x30
? handle_bug+0x3e/0x70
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? refcount_warn_saturate+0xb2/0x100
? refcount_warn_saturate+0xb2/0x100
ax25_release+0x2ad/0x360
__sock_release+0x35/0xa0
sock_close+0x19/0x20
[...]
On reboot (or any attempt to remove the interface), the kernel gets
stuck in an infinite loop:
unregister_netdevice: waiting for ax0 to become free. Usage count = 0
This patch corrects these issues by ensuring that we call netdev_hold()
and ax25_dev_hold() for new connections in ax25_accept(). This makes the
logic leading to ax25_accept() match the logic for ax25_bind(): in both
cases we increment the refcount, which is ultimately decremented in
ax25_release().
Fixes: 9fd75b66b8 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
Signed-off-by: Lars Kellogg-Stedman <lars@oddbit.com>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Dan Cross <crossd@gmail.com>
Tested-by: Chris Maness <christopher.maness@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240529210242.3346844-2-lars@oddbit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A general documentation about MPTCP was missing since its introduction
in v5.6.
Most of what is there comes from our recently updated mptcp.dev website,
with additional links to resources from the kernel documentation.
This is a first version, mainly targeting app developers and users.
Link: https://www.mptcp.dev
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240530-upstream-net-20240520-mptcp-doc-v3-3-e94cdd9f2673@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to what is done in other 'sysctl' pages: it looks clearer from a
readability perspective.
This might cause troubles in the short/mid-term with the backports, but
by not putting new entries at the end, this can help to reduce conflicts
in case of backports in the long term. We don't change the information
here too often, so it looks OK to do that.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240530-upstream-net-20240520-mptcp-doc-v3-2-e94cdd9f2673@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This sysctl knob has been added recently, but the documentation has not
been updated.
This knob is used to show the available schedulers choices that are
registered, similar to 'net.ipv4.tcp_available_congestion_control'.
Fixes: 73c900aa36 ("mptcp: add net.mptcp.available_schedulers")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240530-upstream-net-20240520-mptcp-doc-v3-1-e94cdd9f2673@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heng Qi says:
====================
virtio_net: fix lock warning and unrecoverable state
Patch 1 describes and fixes an issue where dim cannot return to
normal state in certain scenarios.
Patch 2 attempts to resolve lockdep's complaints that holding many
nested locks.
====================
Link: https://lore.kernel.org/r/20240528134116.117426-1-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the following snippet is run, lockdep will report a deadlock[1].
/* Acquire all queues dim_locks */
for (i = 0; i < vi->max_queue_pairs; i++)
mutex_lock(&vi->rq[i].dim_lock);
There's no deadlock here because the vq locks are always taken
in the same order, but lockdep can not figure it out. So refactoring
the code to alleviate the problem.
[1]
========================================================
WARNING: possible recursive locking detected
6.9.0-rc7+ #319 Not tainted
--------------------------------------------
ethtool/962 is trying to acquire lock:
but task is already holding lock:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&vi->rq[i].dim_lock);
lock(&vi->rq[i].dim_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ethtool/962:
#0: ffffffff82dbaab0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x40
#1: ffffffff82dad0a8 (rtnl_mutex){+.+.}-{3:3}, at:
ethnl_default_set_doit+0xbe/0x1e0
stack backtrace:
CPU: 6 PID: 962 Comm: ethtool Not tainted 6.9.0-rc7+ #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xb0
check_deadlock+0x130/0x220
__lock_acquire+0x861/0x990
lock_acquire.part.0+0x72/0x1d0
? lock_acquire+0xf8/0x130
__mutex_lock+0x71/0xd50
virtnet_set_coalesce+0x151/0x190
__ethnl_set_coalesce.isra.0+0x3f8/0x4d0
ethnl_set_coalesce+0x34/0x90
ethnl_default_set_doit+0xdd/0x1e0
genl_family_rcv_msg_doit+0xdc/0x130
genl_family_rcv_msg+0x154/0x230
? __pfx_ethnl_default_set_doit+0x10/0x10
genl_rcv_msg+0x4b/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x1af/0x280
netlink_sendmsg+0x20e/0x460
__sys_sendto+0x1fe/0x210
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x3a2/0x8a0
? __lock_release+0x5e/0x160
? do_user_addr_fault+0x3a2/0x8a0
? lock_release+0x72/0x140
? do_user_addr_fault+0x3a7/0x8a0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x78/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 4d4ac2ecec ("virtio_net: Add a lock for per queue RX coalesce")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240528134116.117426-3-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the dim worker is scheduled, if it no longer needs to issue
commands, dim may not be able to return to the working state later.
For example, the following single queue scenario:
1. The dim worker of rxq0 is scheduled, and the dim status is
changed to DIM_APPLY_NEW_PROFILE;
2. dim is disabled or parameters have not been modified;
3. virtnet_rx_dim_work exits directly;
Then, even if net_dim is invoked again, it cannot work because the
state is not restored to DIM_START_MEASURE.
Fixes: 6208799553 ("virtio-net: support rx netdim")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240528134116.117426-2-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 has a dedicated queue for PTP packets. Clarify that
this sort of queues can also be accounted towards the base.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240529162922.3690698-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Statistic values should be set to ETHTOOL_STAT_NOT_SET even if the
device doesn't support statistics. Otherwise zeros will be returned as
if they are proper values:
host# ethtool -I -T lo
Time stamping parameters for lo:
Capabilities:
software-transmit
software-receive
software-system-clock
PTP Hardware Clock: none
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
Statistics:
tx_pkts: 0
tx_lost: 0
tx_err: 0
Fixes: 0e9c127729 ("ethtool: add interface to read Tx hardware timestamping statistics")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20240530040814.1014446-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Motorcomm PHY driver is now maintained by the OEM. The driver has
expanded far beyond my original purpose, and I do not have the hardware
to test against the new portions of it. Therefore I am removing myself as
a maintainer of the driver.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20240529185635.538072-1-pgwipeout@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactored the handling of control_buf to be within the cvq_lock
critical section, mitigating race conditions between reading device
responses and new command submissions.
Fixes: 6f45ab3e04 ("virtio_net: Add a lock for the command VQ.")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240530034143.19579-1-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=o/Xa
-----END PGP SIGNATURE-----
Merge tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two small smb3 fixes:
- Fix socket creation with sfu mount option (spotted by test generic/423)
- Minor cleanup: fix missing description in two files"
* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix creating sockets when using sfu mount options
fs: smb: common: add missing MODULE_DESCRIPTION() macros
In the cpuset_css_online(), clearing the CS_SCHED_LOAD_BALANCE bit
of cs->flags is guarded by callback_lock and cpuset_mutex. There is
no problem with itself, because it is consistent with the description
of there two global lock at the beginning of this file. However, since
the operation of checking, setting and clearing the flag bit is atomic,
protection of callback_lock is unnecessary here, see CS_SPREAD_*. so
to make it more consistent with the other code, move the operation
outside the critical section of callback_lock.
No functional changes intended.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
* Fix a livelock by dropping an xfarray sortinfo folio when an error is
encountered.
* During extended attribute operations, Initialize transaction reservation
computation based on attribute operation code.
* Relax symbolic link's ondisk verification code to allow symbolic links
with short remote targets.
* Prevent soft lockups when unmapping file ranges and also during remapping
blocks during a reflink operation.
* Fix compilation warnings when XFS is built with W=1 option.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZlbRngAKCRAH7y4RirJu
9DFfAP0aQYHIGOUx6YCvucoLtIRWYqaxDvgWPjLrtaeiUSmY7AEA1M4BVl/2Svkj
hgs1/qqU8WGze/KqdG/aJbJS0ZqJKAU=
=gxY4
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix a livelock by dropping an xfarray sortinfo folio when an error
is encountered
- During extended attribute operations, Initialize transaction
reservation computation based on attribute operation code
- Relax symbolic link's ondisk verification code to allow symbolic
links with short remote targets
- Prevent soft lockups when unmapping file ranges and also during
remapping blocks during a reflink operation
- Fix compilation warnings when XFS is built with W=1 option
* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add cond_resched to block unmap range and reflink remap path
xfs: don't open-code u64_to_user_ptr
xfs: allow symlinks with short remote targets
xfs: fix xfs_init_attr_trans not handling explicit operation codes
xfs: drop xfarray sortinfo folio on error
xfs: Stop using __maybe_unused in xfs_alloc.c
xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
Here is a single revert for a much-reported regression in 6.10-rc1 when
it comes to a few older architectures. Turns out that the VT ioctls
don't work the same across all cpu types because of some old
compatibility requrements for stuff like alpha and powerpc. So revert
the change that attempted to have them use the _IO() macros and go back
to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZlq8nA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk+DwCglMTNzLC9AXBLTMK+altLzlzPJ6oAn0QbNe8s
6o8/G2XSYilmnRAZvoNS
=b7pn
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZlntgBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbShXAA/3ecCnZWTkgHKSKQiS+t1nUkQmAgZ1Zzmm6v
UaJDCOBnAP9nAEfgEgMHZO1LVL38N6EWzexjnglFkZFHpT8gFwKtCw==
=R5nh
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
Since commit 0a44dfc070 ("wifi: mac80211: simplify non-chanctx
drivers") ieee80211_hw_config() is no longer called with changed = ~0.
rtlwifi relied on ~0 in order to ignore the default retry limits of
4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS.
RTL8192DU has a lot of packet loss with the default limits from
mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS
completely, because it's the simplest solution.
Link: https://lore.kernel.org/linux-wireless/cedd13d7691f4692b2a2fa5a24d44a22@realtek.com/
Cc: stable@vger.kernel.org # 6.9.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/1fabb8e4-adf3-47ae-8462-8aea963bc2a5@gmail.com
'brcmf_pcie_core_info' was added in
commit 9e37f045d5 ("brcmfmac: Adding PCIe bus layer support.")
but never used.
'brcms_c_bit_desc' last use was removed in
commit cdf4352f5c ("brcmsmac: Improve tx trace and debug support").
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240526234553.286773-1-linux@treblig.org
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). This patch has no effect
on runtime behavior.
At the same time remove some redundant NULL initializations.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/AS8PR02MB7237FF1C2E880D1231684D708BF02@AS8PR02MB7237.eurprd02.prod.outlook.com
Commit f236464f1d ("wifi: wilc1000: convert list management to RCU")
attempted to convert SRCU to RCU usage, assuming it was not really needed.
The runtime issues that arose after merging it showed that there are code
paths involving sleeping functions, and removing those would need some
heavier driver rework.
Add some documentation about SRCU need to make sure that any future
developer do not miss some use cases if tempted to convert back again to
RCU.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-3-bce096e0798c@bootlin.com
This reverts commit 35aee01ff4
Commit 35aee01ff4 ("wifi: wilc1000: set atomic flag on kmemdup in srcu
critical section") was preparatory to the SRCU to RCU conversion done by
commit f236464f1d ("wifi: wilc1000: convert list management to RCU").
This conversion brought issues and so has been reverted, so the atomic flag
is not needed anymore.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-2-bce096e0798c@bootlin.com
This reverts commit f236464f1d
Commit f236464f1d ("wifi: wilc1000: convert list management to RCU")
replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No
documentation or commit history hinted about why SRCU has been preferred
in original design, so it has been assumed to be safe to do this
conversion.
Unfortunately, some static analyzers raised warnings, confirmed by runtime
checker, not long after the merge. At least three different issues arose
when switching to RCU:
- wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical
section yet calls wait_for_completion_timeout
- wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while
manipulating a vif retrieved from vif list
- set_channel sends command to chip (and so, also waits for a completion)
while holding a vif retrieved from vif list (so, in RCU read critical
section)
Some of those issues are not trivial to fix and would need bigger driver
rework. Fix those issues by reverting the SRCU to RCU conversion commit
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/
Fixes: f236464f1d ("wifi: wilc1000: convert list management to RCU")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-1-bce096e0798c@bootlin.com
ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.
-----BEGIN PGP SIGNATURE-----
iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZaAPoXHHF1aWNfa3Zh
bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZsyFAf/R3y+MhEEMgQRHiBddHrzCWb0
J0z88GoUtQL5R8nYZu7jwyl9OozR8EpdHHmnapvvZ4AXY00CC5yFEJeZkWEEttNk
DY2th3sEy0MlQmHs1C57Y1vAHQnClQpyRtohw6kxl5u8SZlB7TAfd+20aJiYstTA
DsmggxnXXg8ag9mtjweoMGnEoozQ39DRZ+fcMbVQAX322Vom3CIqEwJim27oVhve
2jY6La2T0t2y+xK7vQO7oqYtWYIu4yWvShyhqcMlOfs2It77UtjcnI1aKZXZ+ngK
EBNYPtf0i3Ik/MDd78d5F/jRddZTcw0ITyncfWaTr1xX9UwbpzfZDIt1uutZ6g==
=J1DD
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20240531' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.
Make sure to preserve and/or enforce FD_CLOEXEC flag on duped FDs.
Use dup3() with O_CLOEXEC flag for that.
Without this fix libbpf effectively clears FD_CLOEXEC flag on each of BPF
map/prog FD, which is definitely not the right or expected behavior.
Reported-by: Lennart Poettering <lennart@poettering.net>
Fixes: bc308d011a ("libbpf: call dup2() syscall directly")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240529223239.504241-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A series of fixes that came in since the merge window, the main thing
being the fixes Andy did for DMA sync where we were calling into the DMA
API in suprising ways and causing issues as a result, the main thing
being confusing the IOMMU code.
We've also got some fairly important fixes for the stm32 driver, it
supports a wide range of hardware and some optimisations that were done
recently have broken on some systems, and a fix to prevent glitched
signals on the bus in the cadence driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZZ/bYACgkQJNaLcl1U
h9DyzQf/dIsKNqJcQXvKmQI1n8uv4I3cGKVqvZ3w/si/9dP/jbhjnzYvvgULF3G2
pp46zntPLfw/qOsGFcK4GNAtgqHaRNpTtnKcPHx9ccRnUBsFiMFigdlImgJ8kOaD
IZxQoxq1H9lxXVHtUCzyE2KWn4XE8BnqTv3i8Luxq1smYCjGMB76FjZhijINBzED
kbFv87jYKzRycd7XwAlRCwreBNCEidxievsecG+WaADYWm4+3j4TyZRLsLik581y
ehCGQJ6vVA4RGq/HvCPiTlCXXhXAYPRhPlYzkztJn8hVGw0IbtL+f678u45/euPE
5D8y8/naw2T8zjB3TmDlw/G7gy23Vw==
=MJUM
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A series of fixes that came in since the merge window, the main thing
being the fixes Andy did for DMA sync where we were calling into the
DMA API in suprising ways and causing issues as a result, the main
thing being confusing the IOMMU code.
We've also got some fairly important fixes for the stm32 driver, it
supports a wide range of hardware and some optimisations that were
done recently have broken on some systems, and a fix to prevent
glitched signals on the bus in the cadence driver"
* tag 'spi-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: Don't warn about spurious interrupts
spi: Assign dummy scatterlist to unidirectional transfers
spi: cadence: Ensure data lines set to low during dummy-cycle period
spi: stm32: Revert change that enabled controller before asserting CS
spi: Check if transfer is mapped before calling DMA sync APIs
spi: Don't mark message DMA mapped when no transfer in it is
One fix that came in since -rc1, fixing misuse of a local variable in
the DT parsing code in the RTQ2208 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZZ/fsACgkQJNaLcl1U
h9D0qwf+OMpul7RQ+omEU2iuavuqTJUv6FCl+5GKzJwVw/JD07oMOzCPA1nS4OTj
wqPC1vmYBGqK1oPHQ4OMq8+ltr2H4XmA4JPMa1bw4Ivqz8gJwju8MSLj5K2gLSRP
/soMHraAYqC8fl8LhN4r4+JP9+s4Jq2Hw67ag4yBAdAf5hMR55FgzcUY4hbnUcHd
xw18DTtVAAtvzP7wieIip91kcxdjVYPupzQMw6fK91xdeSs9ufzAsEA0DqzO75F7
iUMl++xk3XMXlCqiIeWNttIh//HuCqmVE3zYmVZF6JseEfW7GMfKQoeoKG/+TfOw
cLJFYjaJx1UXQG/AKGXd3gnPedwZ5w==
=frlq
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix that came in since -rc1, fixing misuse of a local variable in
the DT parsing code in the RTQ2208 driver"
* tag 'regulator-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Fix invalid memory access when devm_of_regulator_put_matches is called
The I2C bus was not taking account of the register and any padding bytes
when handling maximum write sizes supported by an I2C adaptor, this
patch from Jim Wylder fixes that.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZaAOYACgkQJNaLcl1U
h9DNPQf+Ntxc4wrrMiZwfASW0ar6ckmclxKZP95NWYxd6XHZJ/E6uMRlHdAJh1Np
LooEHMy+Sg0n6w7FGfVgL22rhpZA8SBeZTrdD3s3YIFoXotfuuOdqcV6WNlj/ZE3
pc5N2M1WhLo1rnTURSWnGtYW6aqoJ69SfZstuWvw/PJkDxnmwB4+abHAF5Of2q36
koRuYnaFOzvvEGi1vDqTgBSWoYHmsxORkuHBA59k1JxWlj3oZGDyRy7nyYPxjYes
D87WnVMSE17qw+rStjd1GktgMYxd82I+5mIFaXCQKppm6caXqkrZCkLLeySAumFA
32R3y5goI3MntEefkXuwW5Lv0r+qNQ==
=mHu+
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"The I2C bus was not taking account of the register and any padding
bytes when handling maximum write sizes supported by an I2C adaptor,
this patch from Jim Wylder fixes that"
* tag 'regmap-fix-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-i2c: Subtract reg size from max_write
