As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
One thing to note for st7703 is that it has a special "allpixelson"
debugfs file. When this file is written the driver hacks a
disable/unprepare and then a prepare/enable to try to reset the
panel. Potentially that might have been relying on the old booleans we
removed. It'll still "work" because of the checks in the core but it
deserves a comment. This debugfs file didn't appear to be particularly
safe to use even before this patch since it would cause a
disabled/unprepared panel to become prepared/enabled.
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Ondřej Jirman <megi@xff.cz>
Cc: Chris Morgan <macromorgan@hotmail.com>
Cc: Frank Oltmanns <frank@oltmanns.dev>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.42.Ifc436b262d72f1a33ddef10adfd7578d4acb60d8@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.30.I2145be78ce28327f4588c2c21370f22fd79d28b8@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.26.I865be97dd393d6ae3c3a3cd1358c95fdbca0fe83@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.24.Ibb4f923363a27167c480a432e52884b117221974@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benni Steini <bennisteinir@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Joel Selvaraj <jo@jsfamily.in>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.18.I13a06b9e6f5920659b1e5d12543b3cd9066383b8@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.16.I4f574b87fe24765ddd4424437159b37a6481aa1a@changeid
It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.
A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.
Unfortunately, grepping mainline for this panel's compatible string
shows no hits, so we can't be 100% sure if the DRM modeset driver used
with this panel has been fixed. If it is found that the DRM modeset
driver hasn't been fixed then this patch could be temporarily reverted
until it is.
[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3399 Puma with Haikou Video Demo
Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # PX30 Ringneck with Haikou Video Demo
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.15.Ibeb2e5692e34b136afe4cf55532f0696ab3f5eed@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.14.I264417152e65b4a2e374666010666fa1c2d973fc@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Brian Norris <briannorris@chromium.org>
Cc: Chris Zhong <zyw@rock-chips.com>
Cc: Nickey Yang <nickey.yang@rock-chips.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.12.I711d07c4f4738df199697fd534c452cdfa46a21f@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Chris Zhong <zyw@rock-chips.com>
Cc: Lin Huang <hl@rock-chips.com>
Cc: Brian Norris <briannorris@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.8.I99c73621fe3fba067a5e7ee6a1f6293c23371e1e@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.6.I4d1bf08781593c08127e506422687ab19fd3c824@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.4.Ib501f2eceb62016e09cfb17bca29bde0f605a567@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503143327.RFT.v2.1.I784238de4810658212a5786b219f128460562a37@changeid
This cpupower fixes update for Linux 6.10-rc2 consists of one single
fix to cpupower's P-State frequency calculation and reporting with
AMD Family 1Ah+ processors, when using the acpi-cpufreq driver.
-----BEGIN PGP SIGNATURE-----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=SJ8p
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux into pm-tools
Merge cpupower utility fix for 6.10-rc2 from Shuah Khan:
"This cpupower fixes update for Linux 6.10-rc2 consists of one single
fix to cpupower's P-State frequency calculation and reporting with
AMD Family 1Ah+ processors, when using the acpi-cpufreq driver."
* tag 'linux-cpupower-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.
In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.
Tested on a AMD Zen4 EPYC server
Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422
After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527
Fixes: ec437d71db ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When extra warnings are enabled, gcc points out a global variable
definition in a header:
In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
123 | static const char * const amd_pstate_mode_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.
Fixes: 36c5014e54 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The powermanagement core does various actions when a powersupply changes.
It calls into notifiers, LED triggers, other power supplies and emits an uevent.
To make sure that all these actions happen properly call power_supply_changed().
Reported-by: Rajas Paranjpe <paranjperajas@gmail.com>
Closes: https://github.com/MrChromebox/firmware/issues/420#issuecomment-2132251318
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pnp_bus_type is defined only when CONFIG_PNP=y, while being
not guarded by ifdeffery in the header. Moreover, it's not used
outside of the PNP code. Move it to the internal header to make
sure no-one will try to (ab)use it.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since we have a dev_is_pnp() macro that utilises the address of the
pnp_bus_type variable, the users, which can be compiled as modules,
will fail to build. Convert the macro to be a function and export it
to the modules to prevent build breakage.
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Closes: https://lore.kernel.org/r/cc8a93b2-2504-9754-e26c-5d5c3bd1265c@gmail.com
Fixes: 2a49b45cd0 ("PNP: Add dev_is_pnp() macro")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To pick the changes in:
4af663c2f6 ("KVM: SEV: Allow per-guest configuration of GHCB protocol version")
4f5defae70 ("KVM: SEV: introduce KVM_SEV_INIT2 operation")
26c44aa9e0 ("KVM: SEV: define VM types for SEV and SEV-ES")
ac5c48027b ("KVM: SEV: publish supported VMSA features")
651d61bc8b ("KVM: PPC: Fix documentation for ppc mmu caps")
That don't change functionality in tools/perf, as no new ioctl is added
for the 'perf trace' scripts to harvest.
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/lkml/ZlYxAdHjyAkvGtMW@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing @ tags for some rpmsg_eptdev structure parameters.
This fixes warning messages on build:
drivers/rpmsg/rpmsg_char.c:75: warning: Function parameter or struct member 'remote_flow_restricted' not described in 'rpmsg_eptdev'
drivers/rpmsg/rpmsg_char.c:75: warning: Function parameter or struct member 'remote_flow_updated' not described in 'rpmsg_eptdev'
Fixes: 5550201c0f ("rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240517165654.427746-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In scp_ipi_handler(), instead of zeroing out the entire shared
buffer, which may be as large as 600 bytes, overwrite it with the
received data, then zero out only the remaining bytes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240520112724.139945-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Include linux/io.h for devm_ioremap().
When built on x86_64 w/ COMPILE_TEST=y:
../drivers/gpu/drm/sti/sti_dvo.c:531:21: error: implicit declaration of function ‘devm_ioremap’ [-Werror=implicit-function-declaration]
531 | dvo->regs = devm_ioremap(dev, res->start,
| ^~~~~~~~~~~~
../drivers/gpu/drm/sti/sti_dvo.c:531:19: error: assignment to ‘void *’ from ‘int’ makes pointer from integer without a cast [-Werror=int-conversion]
531 | dvo->regs = devm_ioremap(dev, res->start,
| ^
Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408170426.9285-7-ville.syrjala@linux.intel.com
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Currently, the --no-desc option in perf list isn't functioning as
intended.
This issue arises from the overwriting of struct option->desc with the
opposite value of struct option->long_desc. Consequently, whatever
parse_options() returns at struct option->desc gets overridden later,
rendering the --desc or --no-desc arguments ineffective.
To resolve this, set ->desc as true by default and allow parse_options()
to adjust it accordingly. This adjustment will fix the --no-desc
option while preserving the functionality of the other parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: leit@meta.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240517141427.1905691-1-leitao@debian.org
Test behavior of PMU names and comparisons wrt suffixes using Intel
uncore_cha, marvell mrvl_ddr_pmu and S390's cpum_cf as examples.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: Bhaskara Budiredla <bbudiredla@marvell.com>
Cc: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515060114.3268149-3-irogers@google.com
The mrvl_ddr_pmu is uncore and has a hexadecimal address suffix while
the previous PMU sorting/merging code assumes uncore PMU names start
with uncore_ and have a decimal suffix. Because of the previous
assumption it isn't possible to wildcard the mrvl_ddr_pmu.
Modify pmu_name_len_no_suffix but also remove the suffix number out
argument, this is because we don't know if a suffix number of say 100
is in hexadecimal or decimal. As the only use of the suffix number is
in comparisons, it is safe there to compare the values as hexadecimal.
Modify perf_pmu__match_ignoring_suffix so that hexadecimal suffixes
are ignored.
Only allow hexadecimal suffixes to be greater than length 2 (ie 3 or
more) so that S390's cpum_cf PMU doesn't lose its suffix.
Change the return type of pmu_name_len_no_suffix to size_t to
workaround GCC incorrectly determining the result could be negative.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: Bhaskara Budiredla <bbudiredla@marvell.com>
Cc: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515060114.3268149-2-irogers@google.com
To pick up the changes from these csets:
53bc516ade ("x86/msr: Move ARCH_CAP_XAPIC_DISABLE bit definition to its rightful place")
That patch just move definitions around, so this just silences this perf
build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/lkml/ZlYe8jOzd1_DyA7X@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New CPU #defines encode vendor and family as well as model but
boot code doesn't have all the infrastructure to use them. Hard
code the one CPU model number used here.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-35-tony.luck%40intel.com
New CPU #defines encode vendor and family as well as model.
Update INTEL_CPU_DESC() to work with vendor/family/model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240520224620.9480-34-tony.luck%40intel.com
New CPU #defines encode vendor and family as well as model.
N.B. Drop Haswell. CPU model 0x3C was included by mistake
in upstream code.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/all/20240521161002.12866-1-tony.luck%40intel.com
Base address of CE ring is defined as u32, currently this works
because DMA mask configured as 32 bit:
#define ATH12K_PCI_DMA_MASK 32
However this mask could be changed once firmware bugs are fixed
to fully support 36 bit DMA addressing. So to protect against any
future changes to the DMA mask, change the type of the fields that
are dependent upon it.
This is found during code review. Compile tested only.
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240524024021.37711-1-quic_bqiang@quicinc.com
Commit 5082b3e302 ("wifi: ath11k: fix race due to setting
ATH11K_FLAG_EXT_IRQ_ENABLED too early") fixes a race in ath11k
driver. Since ath12k shares the same logic as ath11k, currently
the race also exists in ath12k: in ath12k_pci_ext_irq_enable(),
ATH12K_FLAG_EXT_IRQ_ENABLED is set before NAPI is enabled.
In cases where only one MSI vector is allocated, this results
in a race condition: after ATH12K_FLAG_EXT_IRQ_ENABLED is set
but before NAPI enabled, CE interrupt breaks in. Since IRQ is
shared by CE and data path, ath12k_pci_ext_interrupt_handler()
is also called where we call disable_irq_nosync() to disable
IRQ. Then napi_schedule() is called but it does nothing because
NAPI is not enabled at that time, meaning that
ath12k_pci_ext_grp_napi_poll() will never run, so we have
no chance to call enable_irq() to enable IRQ back. Since IRQ
is shared, all interrupts are disabled and we would finally
get no response from target.
So port ath11k fix here, this is done by setting
ATH12K_FLAG_EXT_IRQ_ENABLED after all NAPI and IRQ work are
done. With the fix, we are sure that by the time
ATH12K_FLAG_EXT_IRQ_ENABLED is set, NAPI is enabled.
Note that the fix above also introduce some side effects:
if ath12k_pci_ext_interrupt_handler() breaks in after NAPI
enabled but before ATH12K_FLAG_EXT_IRQ_ENABLED set, nothing
will be done by the handler this time, the work will be
postponed till the next time the IRQ fires.
This is found during code review.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240524023642.37030-1-quic_bqiang@quicinc.com
