The L3 bank mask is already generated and stored internally with
the rest of the GT topology. In user space, the compute runtime
now needs this information to be added to the device properties
therefore the topology mask query is extended to provide a new
mask which represents the L3 banks enabled on the GT.
The changes in the compute runtime are ready and approved, see
link below.
v2: Rewrite commit message and add a link to the compute
runtime PR (Francois Dugast)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Robert Krzemien <robert.krzemien@intel.com>
Cc: Mateusz Jablonski <mateusz.jablonski@intel.com>
Link: https://github.com/intel/compute-runtime/pull/722
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Acked-by: Mateusz Jablonski <mateusz.jablonski@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416145037.7-2-francois.dugast@intel.com
Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.
However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().
gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
struct dwapb_port_property *pp,
unsigned int offs);
port->gc.fwnode = pp->fwnode;
693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.
Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.
Fixes: 5062e4c14b ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1ea5 ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
to struct file * and verifying that caller has device
opened exclusively.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwkfQAKCRBZ7Krx/gZQ
62C3AQDW5vuXNx2+KDPma5YStjFpPLC0xtSyAS5D3YANjtyRFgD/TOcCarq7rvBt
KubxHVFsfW+eu6ASeaoMRB83w5OIzwk=
=Liix
-----END PGP SIGNATURE-----
Merge tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs blocksize updates from Al Viro:
"This gets rid of bogus set_blocksize() uses, switches it over
to be based on a 'struct file *' and verifies that the caller
has the device opened exclusively"
* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make set_blocksize() fail unless block device is opened exclusive
set_blocksize(): switch to passing struct file *
btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
swsusp: don't bother with setting block size
zram: don't bother with reopening - just use O_EXCL for open
swapon(2): open swap with O_EXCL
swapon(2)/swapoff(2): don't bother with block size
pktcdvd: sort set_blocksize() calls out
bcache_register(): don't bother with set_blocksize()
Following the relocation of the function call outside of
__acpi_find_gpio(), move the ACPI device NULL check to
acpi_can_fallback_to_crs().
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/all/20240426154208.81894-1-laura.nao@collabora.com/
Fixes: 49c02f6e90 ("gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
pidfs started using much saner inodes in commit b28ddcc32d ("pidfs:
convert to path_from_stashed() helper"), but that exposed the fact that
lsof had some knowledge of just how odd our old anon_inode usage was.
For example, legacy anon_inodes hadn't even initialized the inode type
in the inode mode, so everything had a type of zero.
So sane tools like 'stat' would report these files as "weird file", but
'lsof' instead used that (together with the name of the link in proc) to
notice that it's an anonymous inode, and used it to detect pidfd files.
Let's keep our internal new sane inode model, but mask the file type
bits at 'stat()' time in the getattr() function we already have, and by
making the dentry name match what lsof expects too.
This keeps our internal models sane, but should make user space see the
same old odd behavior.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/a15b1050-4b52-4740-a122-a4d055c17f11@kernel.org/
Link: https://github.com/lsof-org/lsof/issues/317
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Seth Forshee <sforshee@kernel.org>
Cc: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The drm-intel repo is moving from the classic fd.o git host to GitLab.
Update its location with a URL matching other fd.o GitLab kernel trees.
Signed-off-by: Ryszard Knop <ryszard.knop@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240424114159.38719-1-ryszard.knop@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In current native multipath design when a shared namespace is created,
we loop through each possible numa-node, calculate the NUMA distance of
that node from each nvme controller and then cache the optimal IO path
for future reference while sending IO. The issue with this design is that
we may refer to the NUMA distance table for an offline node which may not
be populated at the time and so we may inadvertently end up finding and
caching a non-optimal path for IO. Then latter when the corresponding
numa-node becomes online and hence the NUMA distance table entry for that
node is created, ideally we should re-calculate the multipath node distance
for the newly added node however that doesn't happen unless we rescan/reset
the controller. So essentially, we may keep using non-optimal IO path for a
node which is made online after namespace is created.
This patch helps fix this issue ensuring that when a shared namespace is
created, we calculate the multipath node distance for each online numa-node
instead of each possible numa-node. Then latter when a node becomes online
and we receive any IO on that newly added node, we would calculate the
multipath node distance for newly added node but this time NUMA distance
table would have been already populated for newly added node. Hence we
would be able to correctly calculate the multipath node distance and choose
the optimal path for the IO.
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Open vSwitch is originally intended to switch at layer 2, only dealing with
Ethernet frames. With the introduction of l3 tunnels support, it crossed
into the realm of needing to care a bit about some routing details when
making forwarding decisions. If an oversized packet would need to be
fragmented during this forwarding decision, there is a chance for pmtu
to get involved and generate a routing exception. This is gated by the
skbuff->pkt_type field.
When a flow is already loaded into the openvswitch module this field is
set up and transitioned properly as a packet moves from one port to
another. In the case that a packet execute is invoked after a flow is
newly installed this field is not properly initialized. This causes the
pmtud mechanism to omit sending the required exception messages across
the tunnel boundary and a second attempt needs to be made to make sure
that the routing exception is properly setup. To fix this, we set the
outgoing packet's pkt_type to PACKET_OUTGOING, since it can only get
to the openvswitch module via a port device or packet command.
Even for bridge ports as users, the pkt_type needs to be reset when
doing the transmit as the packet is truly outgoing and routing needs
to get involved post packet transformations, in the case of
VXLAN/GENEVE/udp-tunnel packets. In general, the pkt_type on output
gets ignored, since we go straight to the driver, but in the case of
tunnel ports they go through IP routing layer.
This issue is periodically encountered in complex setups, such as large
openshift deployments, where multiple sets of tunnel traversal occurs.
A way to recreate this is with the ovn-heater project that can setup
a networking environment which mimics such large deployments. We need
larger environments for this because we need to ensure that flow
misses occur. In these environment, without this patch, we can see:
./ovn_cluster.sh start
podman exec ovn-chassis-1 ip r a 170.168.0.5/32 dev eth1 mtu 1200
podman exec ovn-chassis-1 ip netns exec sw01p1 ip r flush cache
podman exec ovn-chassis-1 ip netns exec sw01p1 \
ping 21.0.0.3 -M do -s 1300 -c2
PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data.
From 21.0.0.3 icmp_seq=2 Frag needed and DF set (mtu = 1142)
--- 21.0.0.3 ping statistics ---
...
Using tcpdump, we can also see the expected ICMP FRAG_NEEDED message is not
sent into the server.
With this patch, setting the pkt_type, we see the following:
podman exec ovn-chassis-1 ip netns exec sw01p1 \
ping 21.0.0.3 -M do -s 1300 -c2
PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data.
From 21.0.0.3 icmp_seq=1 Frag needed and DF set (mtu = 1222)
ping: local error: message too long, mtu=1222
--- 21.0.0.3 ping statistics ---
...
In this case, the first ping request receives the FRAG_NEEDED message and
a local routing exception is created.
Tested-by: Jaime Caamano <jcaamano@redhat.com>
Reported-at: https://issues.redhat.com/browse/FDP-164
Fixes: 58264848a5 ("openvswitch: Add vxlan tunneling support.")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240516200941.16152-1-aconole@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Print the accumulated runtime for client when printing fdinfo.
Each time a query is done it first does 2 things:
1) loop through all the exec queues for the current client and
accumulate the runtime, per engine class. CTX_TIMESTAMP is used for
that, being read from the context image.
2) Read a "GPU timestamp" that can be used for considering "how much GPU
time has passed" and that has the same unit/refclock as the one
recording the runtime. RING_TIMESTAMP is used for that via MMIO.
Since for all current platforms RING_TIMESTAMP follows the same
refclock, just read it once, using any first engine available.
This is exported to userspace as 2 numbers in fdinfo:
drm-cycles-<class>: <RUNTIME>
drm-total-cycles-<class>: <TIMESTAMP>
Userspace is expected to collect at least 2 samples, which allows to
know the client engine busyness as per:
RUNTIME1 - RUNTIME0
busyness = ---------------------
T1 - T0
Since drm-cycles-<class> always starts at 0, it's also possible to know
if and engine was ever used by a client.
It's expected that userspace will read any 2 samples every few seconds.
Given the update frequency of the counters involved and that
CTX_TIMESTAMP is 32-bits, the counter for each exec_queue can wrap
around (assuming 100% utilization) after ~200s. The wraparound is not
perceived by userspace since it's just accumulated for all the
exec_queues in a 64-bit counter) but the measurement will not be
accurate if the samples are too far apart.
This could be mitigated by adding a workqueue to accumulate the counters
every so often, but it's additional complexity for something that is
done already by userspace every few seconds in tools like gputop (from
igt), htop, nvtop, etc, with none of them really defaulting to 1 sample
per minute or more.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-9-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
gt->info.engine_mask used to indicate the available engines, but that
is not always true anymore: some engines are reserved to kernel and some
may be exposed as a single engine (e.g. with ccs_mode).
Runtime changes only happen when no clients exist, so it's safe to cache
the list of engines in the gt and update that when it's needed. This
will help implementing per client engine utilization so this (mostly
constant) information doesn't need to be re-calculated on every query.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-7-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add a helper to accumulate per-client runtime of all its
exec queues. This is called every time a sched job is finished.
v2:
- Use guc_exec_queue_free_job() and execlist_job_free() to accumulate
runtime when job is finished since xe_sched_job_completed() is not a
notification that job finished.
- Stop trying to update runtime from xe_exec_queue_fini() - that is
redundant and may happen after xef is closed, leading to a
use-after-free
- Do not special case the first timestamp read: the default LRC sets
CTX_TIMESTAMP to zero, so even the first sample should be a valid
one.
- Handle the parallel submission case by multiplying the runtime by
width.
v3: Update comments
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Just like CTX_TIMESTAMP is used to calculate runtime, add a helper to
get the timestamp for the engine so it can be used to calculate the
"engine time" with the same unit as the runtime is recorded.
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add a helper to capture CTX_TIMESTAMP from the context image so it can
be used to calculate the runtime.
v2: Add kernel-doc to clarify expectation from caller
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
XE_ENGINE_CLASS_OTHER was missing from the str conversion. Add it and
remove the default handling so it's protected by -Wswitch.
Currently the only user is xe_hw_engine_class_sysfs_init(), which
already skips XE_ENGINE_CLASS_OTHER, so there's no change in behavior.
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517204310.88854-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Although 'norecovery' mount option was marked as deprecated for a long
time and a warning message was printed during the deprecation window,
it's still actively utilized by several projects that need a safer way
to mount a btrfs without any writes.
Furthermore this 'norecovery' mount option is supported by other major
filesystems, which makes it less clear what's our motivation to remove
it.
Re-introduce the 'norecovery' mount option, and output a message to recommend
'rescue=nologreplay' option.
Link: https://lore.kernel.org/linux-btrfs/ZkxZT0J-z0GYvfy8@gardel-login/#t
Link: https://github.com/systemd/systemd/pull/32892
Link: https://bugzilla.suse.com/show_bug.cgi?id=1222429
Reported-by: Lennart Poettering <lennart@poettering.net>
Reported-by: Jiri Slaby <jslaby@suse.com>
Fixes: a1912f7121 ("btrfs: remove code for inode_cache and recovery mount options")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ACPI specification clearly states how the processors should be
enumerated in the MADT:
"To ensure that the boot processor is supported post initialization,
two guidelines should be followed. The first is that OSPM should
initialize processors in the order that they appear in the MADT. The
second is that platform firmware should list the boot processor as the
first processor entry in the MADT.
...
Failure of OSPM implementations and platform firmware to abide by
these guidelines can result in both unpredictable and non optimal
platform operation."
The kernel relies on that ordering to detect the real BSP on crash kernels
which is important to avoid sending a INIT IPI to it as that would cause a
full machine reset.
On a Dell XPS 16 9640 the BIOS ignores this rule and enumerates the CPUs in
the wrong order. As a consequence the kernel falsely detects a crash kernel
and disables the corresponding CPU.
Prevent this by checking the IA32_APICBASE MSR for the BSP bit on the boot
CPU. If that bit is set, then the MADT based BSP detection can be safely
ignored. If the kernel detects a mismatch between the BSP bit and the first
enumerated MADT entry then emit a firmware bug message.
This obviously also has to be taken into account when the boot APIC ID and
the first enumerated APIC ID match. If the boot CPU does not have the BSP
bit set in the APICBASE MSR then there is no way for the boot CPU to
determine which of the CPUs is the real BSP. Sending an INIT to the real
BSP would reset the machine so the only sane way to deal with that is to
limit the number of CPUs to one and emit a corresponding warning message.
Fixes: 5c5682b9f8 ("x86/cpu: Detect real BSP on crash kernels")
Reported-by: Carsten Tolkmit <ctolkmit@ennit.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Carsten Tolkmit <ctolkmit@ennit.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87le48jycb.ffs@tglx
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218837
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap
allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag
causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
Return -EINVAL early if COW mapping is detected.
This bug affects all drm drivers using default shmem helpers.
It can be reproduced by this simple example:
void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset);
ptr[0] = 0;
Fixes: 2194a63a81 ("drm: Add library for shmem backed GEM objects")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240520100514.925681-1-jacek.lawrynowicz@linux.intel.com
Shifting *signed int* typed constant 1 left by 31 bits causes undefined
behavior. Specify the correct *unsigned long* type by using 1UL instead.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
All callers of pnfs_generic_pg_check_layout() also want to do a call to
check that the layout's range covers the IO range. Merge the functionality
of the pnfs_generic_pg_check_range() into that of
pnfs_generic_pg_check_layout().
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Before doing the IO, check that we have the layout covering the range of
IO.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Change left over allocation flags.
Fixes: a245832aaa ("pNFS/files: Ensure pNFS allocation modes are consistent with nfsiod")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
TC9595 datasheet Video Path0 Control (VPCTRL0) Register bit FRMSYNC description
says "This bit should be disabled only in video mode transmission where Host
transmits video timing together with video data and where pixel clock source
is from DSI clock." . This driver always sources pixel clock from external xtal,
therefore the FRMSYNC bit must always be enabled, enable it.
This fixes an actual issue with DSI-to-DPI mode, where the display would
randomly show subtle pixel flickering, or wobble, or shimmering. This is
visible on solid gray color, but the degree of the shimmering differs
between boots, which makes it hard to debug.
There is a caveat to the FRMSYNC and this bridge pixel PLL, which can only
generate pixel clock with limited accuracy, it may therefore be necessary
to reduce the HFP to fit into line length of input pixel data, to avoid any
possible overflows, which make the output video look striped horizontally.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513021607.129111-1-marex@denx.de
scm_rights.c covers various test cases for inflight file descriptors
and garbage collector for AF_UNIX sockets.
Currently, SCM_RIGHTS messages are sent with 3-bytes string, and it's
not good for MSG_OOB cases, as SCM_RIGTS cmsg goes with the first 2-bytes,
which is non-OOB data.
Let's send SCM_RIGHTS messages with 1-byte character to pack SCM_RIGHTS
into OOB data.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GC attempts to explicitly drop oob_skb's reference before purging the hit
list.
The problem is with embryos: kfree_skb(u->oob_skb) is never called on an
embryo socket.
The python script below [0] sends a listener's fd to its embryo as OOB
data. While GC does collect the embryo's queue, it fails to drop the OOB
skb's refcount. The skb which was in embryo's receive queue stays as
unix_sk(sk)->oob_skb and keeps the listener's refcount [1].
Tell GC to dispose embryo's oob_skb.
[0]:
from array import array
from socket import *
addr = '\x00unix-oob'
lis = socket(AF_UNIX, SOCK_STREAM)
lis.bind(addr)
lis.listen(1)
s = socket(AF_UNIX, SOCK_STREAM)
s.connect(addr)
scm = (SOL_SOCKET, SCM_RIGHTS, array('i', [lis.fileno()]))
s.sendmsg([b'x'], [scm], MSG_OOB)
lis.close()
[1]
$ grep unix-oob /proc/net/unix
$ ./unix-oob.py
$ grep unix-oob /proc/net/unix
0000000000000000: 00000002 00000000 00000000 0001 02 0 @unix-oob
0000000000000000: 00000002 00000000 00010000 0001 01 6072 @unix-oob
Fixes: 4090fa373f ("af_unix: Replace garbage collection algorithm.")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use current_stack_pointer to avoid asm() in the calculation of
stack_end in init_heap(). The new code is more readable and
results in exactly the same object file.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240520083011.135342-1-ubizjak@gmail.com
The compatible pattern "st,stm32-sai-sub-[ab]" is missing starting and
ending anchors, so any prefix and/or suffix would still be valid.
This also fixes a warning on the example:
Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a']
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://msgid.link/r/20240520222705.1742367-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the TPS6594 PMIC Manual (linked) 8.3.2.1.4 Multi-Phase BUCK
Regulator Configurations section, the PMIC ignores all the other bucks'
except the primary buck's regulator registers. This is BUCK1 for
configurations BUCK12, BUCK123 and BUCK1234 while it is BUCK3 for
BUCK34. Correct the registers mapped for these configurations
accordingly.
Fixes: f17ccc5deb ("regulator: tps6594-regulator: Add driver for TI TPS6594 regulators")
Link: https://www.ti.com/lit/gpn/tps6594-q1
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://msgid.link/r/20240521094758.2190331-1-n-francis@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Test arp_ndisc_untracked_subnets use tcpdump to filter the unsolicited
and untracked na messages. It set -e before calling tcpdump. But if
tcpdump filters 0 packet, it will return none zero, and cause the script
to exit.
Instead of using slow tcpdump to capture packets, let's using tc rule
to filter out the na message.
At the same time, fix function setup_v6 which only needs one parameter.
Move all the related helpers from forwarding lib.sh to net lib.sh.
Fixes: 0ea7b0a454 ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240517010327.2631319-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
seg6_hmac_init_algo returns without cleaning up the previous allocations
if one fails, so it's going to leak all that memory and the crypto tfms.
Update seg6_hmac_exit to only free the memory when allocated, so we can
reuse the code directly.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Closes: https://lore.kernel.org/netdev/Zj3bh-gE7eT6V6aH@hog/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240517005435.2600277-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AudioMix BLK-CTRL on i.MX8MP encountered an accessing register issue
after power up.
[ 2.181035] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 2.181038] CPU: 1 PID: 48 Comm: kworker/u16:2 Not tainted 6.9.0-rc5-next-20240424-00003-g21cec88845c6 #171
[ 2.181047] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 2.181050] Workqueue: events_unbound deferred_probe_work_func
[ 2.181064] Call trace:
[...]
[ 2.181142] arm64_serror_panic+0x6c/0x78
[ 2.181149] do_serror+0x3c/0x70
[ 2.181157] el1h_64_error_handler+0x30/0x48
[ 2.181164] el1h_64_error+0x64/0x68
[ 2.181171] clk_imx8mp_audiomix_runtime_resume+0x34/0x44
[ 2.181183] __genpd_runtime_resume+0x30/0x80
[ 2.181195] genpd_runtime_resume+0x110/0x244
[ 2.181205] __rpm_callback+0x48/0x1d8
[ 2.181213] rpm_callback+0x68/0x74
[ 2.181224] rpm_resume+0x468/0x6c0
[ 2.181234] __pm_runtime_resume+0x50/0x94
[ 2.181243] pm_runtime_get_suppliers+0x60/0x8c
[ 2.181258] __driver_probe_device+0x48/0x12c
[ 2.181268] driver_probe_device+0xd8/0x15c
[ 2.181278] __device_attach_driver+0xb8/0x134
[ 2.181290] bus_for_each_drv+0x84/0xe0
[ 2.181302] __device_attach+0x9c/0x188
[ 2.181312] device_initial_probe+0x14/0x20
[ 2.181323] bus_probe_device+0xac/0xb0
[ 2.181334] deferred_probe_work_func+0x88/0xc0
[ 2.181344] process_one_work+0x150/0x290
[ 2.181357] worker_thread+0x2f8/0x408
[ 2.181370] kthread+0x110/0x114
[ 2.181381] ret_from_fork+0x10/0x20
[ 2.181391] SMP: stopping secondary CPUs
According to comments in power up handshake:
/* request the ADB400 to power up */
if (domain->bits.hskreq) {
regmap_update_bits(domain->regmap, domain->regs->hsk,
domain->bits.hskreq, domain->bits.hskreq);
/*
* ret = regmap_read_poll_timeout(domain->regmap, domain->regs->hsk, reg_val,
* (reg_val & domain->bits.hskack), 0,
* USEC_PER_MSEC);
* Technically we need the commented code to wait handshake. But that needs
* the BLK-CTL module BUS clk-en bit being set.
*
* There is a separate BLK-CTL module and we will have such a driver for it,
* that driver will set the BUS clk-en bit and handshake will be triggered
* automatically there. Just add a delay and suppose the handshake finish
* after that.
*/
}
The BLK-CTL module needs to add delay to wait for a handshake request finished.
For some BLK-CTL module (eg. AudioMix on i.MX8MP) doesn't have BUS clk-en
bit, it is better to add delay in this driver, as the BLK-CTL module doesn't
need to care about how it is powered up.
regmap_read_bypassed() is to make sure the above write IO transaction already
reaches target before udelay().
Fixes: 1496dd413b ("clk: imx: imx8mp: Add pm_runtime support for power saving")
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/all/66293535.170a0220.21fe.a2e7@mx.google.com/
Suggested-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/1715396125-3724-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit 7274c4147a.
Ken reported that RTL8125b can lock up if gro_flush_timeout has the
default value of 20000 and napi_defer_hard_irqs is set to 0.
In this scenario device interrupts aren't disabled, what seems to
trigger some silicon bug under heavy load. I was able to reproduce this
behavior on RTL8168h. Fix this by reverting 7274c4147a.
Fixes: 7274c4147a ("r8169: don't try to disable interrupts if NAPI is scheduled already")
Cc: stable@vger.kernel.org
Reported-by: Ken Milmore <ken.milmore@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/9b5b6f4c-4f54-4b90-b0b3-8d8023c2e780@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge an amd-pstate driver fix for 6.10-rc1:
- Fix a memory leak in the exit path of amd-pstate (Peng Ma).
* pm-cpufreq:
cpufreq: amd-pstate: fix memory leak on CPU EPP exit
Enable named address spaces also for GCC 6, GCC 7 and GCC 8
releases. These compilers all produce kernel images that boot
without problems.
Use compile-time test to detect compiler support for named
address spaces. The test passes with GCC 6 as the earliest
compiler version where the support for named address spaces
was introduced.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240520082134.121320-1-ubizjak@gmail.com
Smatch is throwing below warning:
Commit 692921ead8 ("wifi: ath12k: flush all packets before
suspend") leads to the following Smatch static checker warning:
drivers/net/wireless/ath/ath12k/core.c:58 ath12k_core_suspend()
warn: sleeping in atomic context
and also gives the reason:
drivers/net/wireless/ath/ath12k/core.c
48 int ret, i;
49
50 if (!ab->hw_params->supports_suspend)
51 return -EOPNOTSUPP;
52
53 rcu_read_lock();
^^^^^^^^^^^^^^^
Disables preemption.
54 for (i = 0; i < ab->num_radios; i++) {
55 ar = ath12k_mac_get_ar_by_pdev_id(ab, i);
56 if (!ar)
57 continue;
--> 58 ret = ath12k_mac_wait_tx_complete(ar);
^^^^^^^
Sleeping in atomic context.
59 if (ret) {
60 ath12k_warn(ab, "failed to wait tx complete: %d\n", ret);
61 rcu_read_unlock();
62 return ret;
63 }
64 }
65 rcu_read_unlock();
But it is weird that no warning on this in run time even with
CONFIG_DEBUG_ATOMIC_SLEEP=y. With some debug it is found that this is
because: when system goes to suspend, ath12k_mac_op_stop() gets called
where then in ath12k_mac_stop() ab->pdevs_active[ar->pdev_idx] is cleared.
This results in ath12k_mac_get_ar_by_pdev_id() always returning a NULL ar,
and thereby ath12k_mac_wait_tx_complete() never gets a chance to run.
Fix it by retrieving ar directly from ab->pdevs[].ar instead of using
ath12k_mac_get_ar_by_pdev_id(). Since ab->pdevs[].ar is set at boot time
and won't get cleared when suspend, ath12k_mac_wait_tx_complete() won't
be skipped. In addition, with ath12k_mac_get_ar_by_pdev_id() removed,
rcu_read_lock()/unlock() are not needed any more, so remove them. This
also fixes the warning above.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Fixes: 692921ead8 ("wifi: ath12k: flush all packets before suspend")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/ath12k/7a96ca11-80b5-4751-8cfc-fa637f3aa63a@moroto.mountain/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240511095045.9623-1-quic_bqiang@quicinc.com
Take advantage of some of the new wrapped routines introduced by
commit f79d6d28d8 ("drm/mipi-dsi: wrap more functions for streamline
handling") to simplify the himax-hx83102 driver a bit more. This gets
rid of some extra error prints (since the _multi functions all print
errors for you) and simplifies the code a bit.
One thing here that isn't just refactoring is that in a few places we
now check with errors with "if (err)" instead of "if (err < 0)". All
errors are expected to be negative so this is not expected to have any
impact. The _multi code internally considers anything non-zero to be
an error so this just makes things consistent.
It can also be noted that hx83102_prepare() has a mix of things that
can take advantage of _multi calls and things that can't. The cleanest
seemed to be to use the multi_ctx still but consistently use the
"accum_err" variable for error returns, though that's definitely a
style decision with pros and cons.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240517143643.8.If761d37b5d511867ac8207fe8220ae48d444a04f@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.8.If761d37b5d511867ac8207fe8220ae48d444a04f@changeid
The mipi_dsi_dcs_nop() function returns an error but we weren't
checking it in boe_panel_prepare(). Add a check. This is highly
unlikely to matter in practice. If the NOP failed then likely later
MIPI commands would fail too.
Found by code inspection.
Fixes: 812562b8d8 ("drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240517143643.3.Ibffbaa5b4999ac0e55f43bf353144433b099d727@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.3.Ibffbaa5b4999ac0e55f43bf353144433b099d727@changeid
If mipi_dsi_dcs_set_display_on() returned an error then we'd store
that in the "ret" variable and jump to error handling. We'd then
attempt an orderly poweroff. Unfortunately we then blew away the value
stored in "ret". That means that if the orderly poweroff actually
worked then we're return 0 (no error) from hx8394_enable() even though
the panel wasn't enabled.
Fix this by not blowing away "ret".
Found by code inspection.
Fixes: 65dc9360f7 ("drm: panel: Add Himax HX8394 panel controller driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240517143643.1.I0a6836fffd8d7620f353becb3df2370d2898f803@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.1.I0a6836fffd8d7620f353becb3df2370d2898f803@changeid
Unfortunately, the G200 ioburst workaround doesn't work on some
servers like Dell poweredge XR11, XR5610, or HPE XL260. In this case
completely disabling WC is the only option to achieve low-latency.
So this adds a new Kconfig option to disable WC mapping of the G200.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517151050.624797-3-jfalempe@redhat.com
