Currently, hardware state is not protected across the reconfigure
operations. However, in single wiphy models, multiple radio/links is
exposed as a MAC hardware (ieee80211_hw) through the driver hardware
abstraction (ath12k_hw) layer. In such scenario, we need to protect
hardware state across the multiple radio/link at the driver hardware
abstraction (ath12k_hw) layer. Therefore, introduce a new mutex in
the ath12k_hw layer.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425090307.3233434-4-quic_periyasa@quicinc.com
Currently, in multi wiphy models, the mac80211 hardware state is maintained
within the radio/link structure. However, in single wiphy models, the
mac80211 hardware state is needed at the hardware abstraction layer
(ath12k_hw). Therefore, move the hardware state from the radio/link
structure to the hardware abstraction layer (ath12k_hw). Additionally,
update the naming convention of the state enums to enhance clarity and
consistency.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425090307.3233434-3-quic_periyasa@quicinc.com
Currently, in multi-wiphy models, the recovery handler access mac80211
HW from the radio/link structure. This will be incorrect for single wiphy
model, as they will hold multiple link/radio structures. To fix this,
access mac80211 HW based on the number of hardware in the SoC/chip. This
approach makes the recovery handler compatible with both multi wiphy and
single wiphy models.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425090307.3233434-2-quic_periyasa@quicinc.com
- SMMUv2:
* Support for fault debugging hardware on Qualcomm implementations
* Re-land support for the ->domain_alloc_paging() callback
- SMMUv3:
* Improve handling of MSI allocation failure
* Drop support for the "disable_bypass" cmdline option
* Major rework of the CD creation code, following on directly from the
STE rework merged last time around.
* Add unit tests for the new STE/CD manipulation logic
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmYzebsQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNO8OB/9mEoD8wx1QjNfG0M1YNGTADBHyu25zsC7U
ttKcq/1G7r1F+9VwqC3YLJdXYcbGe971j6mFGqxSlIpay29ZipHOqDHj/ys3P1T5
fxgEGQxufIUUjbOJUdQZY89HBuBRrmC87da2ge27KoFa4Z3vo4U48B09aRBVdMCN
Ku3L1eoSItrID3ANUWTPpJeaYjULKn/9URpGmCBYsMBda4DCGRAN6ncv3bNVV4IE
vrPm5K2B0OA9vEi+Am8zn+VZYzCoddjtV8FZapl1Hs0cL6om5qlyM6sVHak5mn8C
mOYXuupXJQEQMN79cDaS+8Yl2UsUdXYZBuTHCOiNibrYWMOw+qfP
=LOvv
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 6.10
- SMMUv2:
* Support for fault debugging hardware on Qualcomm implementations
* Re-land support for the ->domain_alloc_paging() callback
- SMMUv3:
* Improve handling of MSI allocation failure
* Drop support for the "disable_bypass" cmdline option
* Major rework of the CD creation code, following on directly from the
STE rework merged last time around.
* Add unit tests for the new STE/CD manipulation logic
reg_count is not used and the register count is
directly derived from the array size and hence
removed.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes 12 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The assignment of disp_cfg_index_max is missed and should be
assigned to __DML2_WRAPPER_MAX_STREAMS_PLANES__.
Fixes: 55ec7679e6 ("drm/amd/display: Limit array index according to architecture")
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify the loop by using list_for_each_entry(). No functional changes.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240411165516.4070649-3-kvalo@kernel.org
This function is another entry point where it must be ensured that
the device resumes before operating on the GuC, so grab a runtime_pm
reference. This fixes inner xe_pm_runtime_get_noresume calls which
were previously failing.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503082450.268335-1-francois.dugast@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The yamllint quoted-strings check wasn't checking keys for quotes, but
support for checking keys was added in 1.34 release. Fix all the errors
found when enabling the check.
Clean-up the xilinx-versal-cpm formatting while we're here.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240426202239.2837516-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Drop unnecessary quotes which aren't needed in yaml. This is checked by
yamllint, but this case was excluded due to the comma and yamllint's
mishandling of some cases with commas. That's now fixed in yamllint
1.34.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240426195404.2771046-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Use __free cleanup handler which ensures that the resource is freed when
it goes out of scope, thus removing the need to manually clean it up
using of_node_put.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Shresth Prasad <shresthprasad7@gmail.com>
Link: https://lore.kernel.org/r/20240428115226.41345-2-shresthprasad7@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The __find_rmem() function is the only place that references the phandle
field of the reserved_mem struct. __find_rmem() is used to match a
device_node object to its corresponding entry in the reserved_mem array
using its phandle value. But, there is already a function called
of_reserved_mem_lookup() which carries out the same action using the
name of the node.
Using the of_reserved_mem_lookup() function is more reliable because
every node is guaranteed to have a name, but not all nodes will have a
phandle.
Nodes are only assigned a phandle if they are explicitly defined in the
DT using "phandle = <phandle_number>", or if they are referenced by
another node in the DT. Hence, If the phandle field is empty, then
__find_rmem() will return a false negative.
Hence, delete the __find_rmem() function and switch to using the
of_reserved_mem_lookup() function to find the corresponding entry of a
device_node in the reserved_mem array. Since the phandle field of the
reserved_mem struct is now unused, delete that as well.
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Link: https://lore.kernel.org/r/20240502192403.3307277-1-quic_obabatun@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- RZ/G2UL and RZ/Five ("r9a07g043")
- RZ/G2L(C) ("r9a07g044")
- RZ/V2L ("r9a07g054")
- RZ/G3S ("r9a08g045")
- RZ/V2M ("r9a09g011")
The above SoCs have HS400 disabled and use fixed address mode. Add a
generic compatible 'renesas,rzg2l-sdhi' fallback string for these SoCs,
where fixed_addr_mode and hs400_disabled quirks are applied.
For backward compatibility, compatible string 'renesas,sdhi-r9a09g011' for
RZ/V2M is retained.
Also rename sdhi_quirks_r9a09g011->sdhi_quirks_rzg2l and
of_r9a09g011_compatible->of_rzg2l_compatible to make it generic.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430145937.133643-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- RZ/G2UL and RZ/Five ("r9a07g043")
- RZ/G2L(C) ("r9a07g044")
- RZ/V2L ("r9a07g054")
- RZ/G3S ("r9a08g045")
- RZ/V2M ("r9a09g011")
The SD/MMC Interface in the above listed SoCs is not identical to that of
R-Car Gen3. These SoCs have HS400 disabled and use fixed address mode.
Therefore, we need to apply fixed_addr_mode and hs400_disabled quirks.
Document 'renesas,rzg2l-sdhi' as a generic compatible string for the
above SoCs.
Also now use the 'renesas,rzg2l-sdhi' string in the if check for making
sure the required clocks are present.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240430145937.133643-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For development purpose, renesas_sdhi_probe() could be called w/
dma_ops = NULL to force the usage of PIO mode. In this case the
renesas_sdhi_enable_dma() will not be called before transferring data.
If renesas_sdhi_enable_dma() is not called, renesas_sdhi_clk_enable()
call from renesas_sdhi_probe() will configure SDBUF by calling the
renesas_sdhi_sdbuf_width() function, but then SDBUF will be reset in
tmio_mmc_host_probe() when calling tmio_mmc_reset() though host->reset().
If SDBUF is zero the data transfer will not work in PIO mode for RZ/G3S.
To fix this call again the renesas_sdhi_sdbuf_width(host, 16) in
renesas_sdhi_reset(). The call of renesas_sdhi_sdbuf_width() was not
removed from renesas_sdhi_clk_enable() as the host->reset() is optional.
Co-developed-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430093724.2692232-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Joel Granados says:
====================
sysctl: Remove sentinel elements from networking
What?
These commits remove the sentinel element (last empty element) from the
sysctl arrays of all the files under the "net/" directory that register
a sysctl array. The merging of the preparation patches [4] to mainline
allows us to just remove sentinel elements without changing behavior.
This is safe because the sysctl registration code (register_sysctl() and
friends) use the array size in addition to checking for a sentinel [1].
Why?
By removing the sysctl sentinel elements we avoid kernel bloat as
ctl_table arrays get moved out of kernel/sysctl.c into their own
respective subsystems. This move was started long ago to avoid merge
conflicts; the sentinel removal bit came after Mathew Wilcox suggested
it to avoid bloating the kernel by one element as arrays moved out. This
patchset will reduce the overall build time size of the kernel and run
time memory bloat by about ~64 bytes per declared ctl_table array (more
info here [5]).
When are we done?
There are 4 patchest (25 commits [2]) that are still outstanding to
completely remove the sentinels: files under "net/" (this patchset),
files under "kernel/" dir, misc dirs (files under mm/ security/ and
others) and the final set that removes the unneeded check for ->procname
== NULL.
Testing:
* Ran sysctl selftests (./tools/testing/selftests/sysctl/sysctl.sh)
* Ran this through 0-day with no errors or warnings
Savings in vmlinux:
A total of 64 bytes per sentinel is saved after removal; I measured in
x86_64 to give an idea of the aggregated savings. The actual savings
will depend on individual kernel configuration.
* bloat-o-meter
- The "yesall" config saves 3976 bytes (bloat-o-meter output [6])
- A reduced config [3] saves 1263 bytes (bloat-o-meter output [7])
Savings in allocated memory:
None in this set but will occur when the superfluous allocations are
removed from proc_sysctl.c. I include it here for context. The
estimated savings during boot for config [3] are 6272 bytes. See [8]
for how to measure it.
Comments/feedback greatly appreciated
Changes in v6:
- Rebased onto net-next/main.
- Besides re-running my cocci scripts, I ran a new find script [9].
Found 0 hits in net/
- Moved "i" variable declaraction out of for() in sysctl_core_net_init
- Removed forgotten sentinel in mpls_table
- Removed CONFIG_AX25_DAMA_SLAVE guard from net/ax25/ax25_ds_timer.c. It
is not needed because that file is compiled only when
CONFIG_AX25_DAMA_SLAVE is set.
- When traversing smc_table, stop on ARRAY_SIZE instead of ARRAY_SIZE-1.
- Link to v5: https://lore.kernel.org/r/20240426-jag-sysctl_remset_net-v5-0-e3b12f6111a6@samsung.com
Changes in v5:
- Added net files with additional variable to my test .config so the
typo can be caught next time.
- Fixed typo tabel_size -> table_size
- Link to v4: https://lore.kernel.org/r/20240425-jag-sysctl_remset_net-v4-0-9e82f985777d@samsung.com
Changes in v4:
- Keep reverse xmas tree order when introducing new variables
- Use a table_size variable to keep the value of ARRAY_SIZE
- Separated the original "networking: Remove the now superfluous
sentinel elements from ctl_table arra" into smaller commits to ease
review
- Merged x.25 and ax.25 commits together.
- Removed any SOB from the commits that were changed
- Link to v3: https://lore.kernel.org/r/20240412-jag-sysctl_remset_net-v3-0-11187d13c211@samsung.com
Changes in v3:
- Reworkded ax.25
- Added a BUILD_BUG_ON for the ax.25 commit
- Added a CONFIG_AX25_DAMA_SLAVE guard where needed
- Link to v2: https://lore.kernel.org/r/20240328-jag-sysctl_remset_net-v2-0-52c9fad9a1af@samsung.com
Changes in v2:
- Rebased to v6.9-rc1
- Removed unneeded comment from sysctl_net_ax25.c
- Link to v1: https://lore.kernel.org/r/20240314-jag-sysctl_remset_net-v1-0-aa26b44d29d9@samsung.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Avoid a buffer overflow when traversing the ctl_table by ensuring that
AX25_MAX_VALUES is the same as the size of ax25_param_table. This is
done with a BUILD_BUG_ON where ax25_param_table is defined and a
CONFIG_AX25_DAMA_SLAVE guard in the unnamed enum definition as well as
in the ax25_dev_device_up and ax25_ds_set_timer functions.
The overflow happened when the sentinel was removed from
ax25_param_table. The sentinel's data element was changed when
CONFIG_AX25_DAMA_SLAVE was undefined. This had no adverse effects as it
still stopped on the sentinel's null procname but needed to be addressed
once the sentinel was removed.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel from atalk_table ctl_table array.
Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel elements from ctl_table structs
* Remove instances where an array element is zeroed out to make it look
like a sentinel. This is not longer needed and is safe after commit
c899710fe7 ("networking: Update to register_net_sysctl_sz") added
the array size to the ctl_table registration
* Remove the need for having __NF_SYSCTL_CT_LAST_SYSCTL as the
sysctl array size is now in NF_SYSCTL_CT_LAST_SYSCTL
* Remove extra element in ctl_table arrays declarations
Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
To avoid lots of small commits, this commit brings together network
changes from (as they appear in MAINTAINERS) LLC, MPTCP, NETROM NETWORK
LAYER, PHONET PROTOCOL, ROSE NETWORK LAYER, RXRPC SOCKETS, SCTP
PROTOCOL, SHARED MEMORY COMMUNICATIONS (SMC), TIPC NETWORK LAYER and
NETWORKING [IPSEC]
* Remove sentinel element from ctl_table structs.
* Replace empty array registration with the register_net_sysctl_sz call
in llc_sysctl_init
* Replace the for loop stop condition that tests for procname == NULL
with one that depends on array size in sctp_sysctl_net_register
* Remove instances where an array element is zeroed out to make it look
like a sentinel in xfrm_sysctl_init. This is not longer needed and is
safe after commit c899710fe7 ("networking: Update to
register_net_sysctl_sz") added the array size to the ctl_table
registration
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
* Remove the zeroing out of an array element (to make it look like a
sentinel) in sysctl_route_net_init And ipv6_route_sysctl_init.
This is not longer needed and is safe after commit c899710fe7
("networking: Update to register_net_sysctl_sz") added the array size
to the ctl_table registration.
* Remove extra sentinel element in the declaration of devinet_vars.
* Removed the "-1" in __devinet_sysctl_register, sysctl_route_net_init,
ipv6_sysctl_net_init and ipv4_sysctl_init_net that adjusted for having
an extra empty element when looping over ctl_table arrays
* Replace the for loop stop condition in __addrconf_sysctl_register that
tests for procname == NULL with one that depends on array size
* Removing the unprivileged user check in ipv6_route_sysctl_init is
safe as it is replaced by calling ipv6_route_sysctl_table_size;
introduced in commit c899710fe7 ("networking: Update to
register_net_sysctl_sz")
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
* Remove the zeroing out of an array element (to make it look like a
sentinel) in neigh_sysctl_register and lowpan_frags_ns_sysctl_register
This is not longer needed and is safe after commit c899710fe7
("networking: Update to register_net_sysctl_sz") added the array size
to the ctl_table registration.
* Replace the for loop stop condition in sysctl_core_net_init that tests
for procname == NULL with one that depends on array size
* Removed the "-1" in mpls_net_init that adjusted for having an extra
empty element when looping over ctl_table arrays
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extensive testing has shown that some specific SD cards require an
increased command timeout to be successfully initialized.
More info:
Platform: Rockchip SoC + DW Multimedia host Controller
SD card: Xvv microSD CMH34A17TMA12 (Made in Korea)
Note: The SD card is custom-made by the customer in collaboration
with the wafer foundry.
Signed-off-by: Felix Qin <xiaokeqinhealth@126.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240429071955.163282-1-xiaokeqinhealth@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Similar to what has already been changed for eMMC and the MMC_SEND_OP_COND
(CMD1), let's convert the SD_APP_OP_COND (ACMD41) for SD cards to use the
common __mmc_poll_for_busy() too.
This change means the initial delay period, that starts as 10ms will now
increase for every loop when being busy. The total accepted timeout for
being busy is 1s, which is according to the SD spec.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Felix Qin <xiaokeqinhealth@126.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240425133034.79599-1-ulf.hansson@linaro.org
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table. Clocks are considered core
components, so usually they are built-in, however these can be built and
used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240410155406.224128-1-krzk@kernel.org
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
MIPS CPUs usually have 1 to 4 cycles load hazards, thus doing load
and right after move to HI/LO will usually stall the pipeline for
significant amount of time. Let's take it into account and separate
loads and mthi/lo in instruction sequence.
The patch uses t6 and t7 registers as temporaries in addition to t8.
The patch tries to deal with SmartMIPS, but I know little about and
haven't tested it.
Changes in v2:
- clear separation of actions for SmartMIPS and pre-MIPSR6.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
WARN_ON() propagates the result of conditional expression, and it can be
used to return early in the following expression in the arch_init_irq().
This is a no-op cleanup, except that compiler may optimize the error paths
better because WARN_ON() implies 'unlikely()'.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Introducing the field 'el0' to the idreg-override for register
ID_AA64PFR0_EL1. This field is also aliased to the new kernel
command line option 'arm64.no32bit_el0' as a more recognizable
and mnemonic name to disable the execution of 32 bit userspace
applications (i.e. avoid Aarch32 execution state in EL0) from
kernel command line.
Link: https://lore.kernel.org/all/20240207105847.7739-1-andrea.porta@suse.com/
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20240429102833.6426-1-andrea.porta@suse.com
Signed-off-by: Will Deacon <will@kernel.org>
The mmu600_pcie is connected with the five PCIe controllers.
The mmu600_php is connected with the USB3 controller, the GMAC
controllers, and the SATA controllers.
See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual).
The IOMMUs are disabled by default, as further patches are needed to
program the SID/SSIDs in to the IOMMUs.
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf)
arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq
arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq
arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs
Additionally, the IOMMU correctly triggers an IOMMU fault when
a PCIe device performs a write (since the device hasn't been
assigned a SID/SSID):
arm-smmu-v3 fc900000.iommu: event 0x02 received:
arm-smmu-v3 fc900000.iommu: 0x0000010000000002
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
While this doesn't provide much value as is, having the devices as
disabled in the device tree will allow developers to see that the rk3588
actually has IOMMUs on the SoC.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240502140231.477049-2-cassel@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is a mx25u12835f spi flash on this board, enable it.
[ 2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes)
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240409120003.309358-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for using the Orange Pi 5 USB-C port for USB in OHCI, EHCI
or XHCI mode. Displayport AltMode is not yet supported.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20240418035232.35344-2-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the proper nodes to activate the USB 3.0 ports on the
Edgeble NCM6A-IO board.
Cc: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Link: https://lore.kernel.org/r/20240502094246.4695-2-anand@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On Edgeble Neural Compute Module add system-power-controller
property to RK806 pmic so that these chips can power off the device.
Cc: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Link: https://lore.kernel.org/r/20240502094246.4695-1-anand@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK 3C is a development board with the
Rockchip RK3566 SoC. It has the following features:
- 1/2/4GB LPDDR4
- 1x HDMI Type A
- 1x PCIE 2.0 slot
- 1x FAN connector
- 3.5mm jack with mic
- 1GbE RTL8211F Ethernet
- 1x USB 3.0, 3x USB 2.0
- 40-pin expansion header
- MicroSD card/eMMC socket
- 16MB SPI NOR (gd25lq128d)
- AP6256 or AIC8800 WiFi/BT
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240428123618.72170-3-amadeus@jmu.edu.cn
[dropped rk809-sound and not specified pmic sound properties]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK 3C is a similar board to the
Radxa ROCK 3A with the Rockchip RK3566 SoC.
Add devicetree binding documentation for it.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240428123618.72170-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The ipu6 driver allocated vmalloc memory for the firmware if
request_firmware() somehow managed not to use vmalloc to allocate it.
Still how the memory is allocated by request_firmware() is not specified
in its API, so be prepared for kmalloc-allocated firmware, too. Instead of
allocating new vmalloc-backed buffer for the firmware, obtain the pages
from virtual addresses instead.
Link: https://lore.kernel.org/linux-media/20240502154950.549015-1-sakari.ailus@linux.intel.com
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240501102236.3b2585d1@canb.auug.org.au/
Fixes: 25fedc0219 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With HDMI monitors we bumped up a case where the crtc clock rate
caused a mismatch on state verification. This was due to
assumption that the SW clock rate from PLL structure would match
the calculated counterpart from HW. This is not necessarily always
the case and therefore we would actually need to recalculate the
clock rate from SW PLL parameters. Then these SW and HW crtc clock
rates can be compared with each other.
The patch recalculates the crtc clock rate for SW state based on
SW PLL parameters and compares the crtc clock rate calculated
from the parameters found from the HW.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502131716.504616-1-mika.kahola@intel.com
Temperature is stored as 16bit value in two's complement format. Current
implementation ignores the sign bit. Make it aware of the sign bit by
using sign_extend32.
Fixes: 3f6b9598b6 ("iio: temperature: Add MCP9600 thermocouple EMF converter")
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Tested-by: Andrew Hepp <andrew.hepp@ahepp.dev>
Link: https://lore.kernel.org/r/20240424185913.1177127-1-dima.fedrau@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix accessing out of bounds array index for average
current and voltage measurements. The device itself has
only 4 channels, but in sysfs there are "fake"
channels for the average voltages and currents too.
Fixes: 0fb528c825 ("iio: adc: adding support for PAC193x")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Closes: https://lore.kernel.org/linux-iio/20240405-embellish-bonnet-ab5f10560d93@wendy/
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240425114232.81390-1-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When a sensor is running and there is a FIFO frequency change due to
another sensor turned on/off, there are glitches on timestamp. Fix that
by using only interrupt timestamp when there is the corresponding sensor
data in the FIFO.
Delete FIFO period handling and simplify internal functions.
Update integration inside inv_mpu6050 and inv_icm42600 drivers.
Fixes: 0ecc363cce ("iio: make invensense timestamp module generic")
Cc: Stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240426094835.138389-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Inheriting the DEXCR across exec can have security and usability
concerns. If a program is compiled with hash instructions it generally
expects to run with NPHIE enabled. But if the parent process disables
NPHIE then if it's not careful it will be disabled for any children too
and the protection offered by hash checks is basically worthless.
This patch introduces a per-process reset value that new execs in a
particular process tree are initialized with. This enables fine grained
control over what DEXCR value child processes run with by default.
For example, containers running legacy binaries that expect hash
instructions to act as NOPs could configure the reset value of the
container root to control the default reset value for all members of
the container.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Add missing SPDX tag on dexcr.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-4-bgray@linux.ibm.com
Add capability to make the DEXCR act as a per-process SPR.
We do not yet have an interface for changing the values per task. We
also expect the kernel to use a single DEXCR value across all tasks
while in privileged state, so there is no need to synchronize after
changing it (the userspace aspects will synchronize upon returning to
userspace).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-3-bgray@linux.ibm.com
The hashchk tests want to verify that the hash key is changed over exec.
It does so by calculating hashes at the same address across an exec.
This is made simpler by disabling PIE functionality, so we can
re-execute ourselves and be using the same addresses in the child.
While -fno-pie is already added, -no-pie is also required.
Fixes: bdb07f35a5 ("selftests/powerpc/dexcr: Add hashst/hashchk test")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-2-bgray@linux.ibm.com
