Detect and mitigate inode collsions that now occur since we
fixed 9p generating duplicate inode structures. Underlying
cause of these appears to be a race condition between reuse
of inode numbers in underlying file system and cleanup of
inode numbers in the client. Enabling caching
makes this much more likely to happen as it increases cleanup
latency due to writebacks.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
The current implementation of the mov instruction with sign extension has the
following problems:
1. It clobbers the source register if it is not stacked because it
sign extends the source and then moves it to the destination.
2. If the dst_reg is stacked, the current code doesn't write the value
back in case of 64-bit mov.
3. There is room for improvement by emitting fewer instructions.
The steps for fixing this and the instructions emitted by the JIT are explained
below with examples in all combinations:
Case A: offset == 32:
=====================
Case A.1: src and dst are stacked registers:
--------------------------------------------
1. Load src_lo into tmp_lo
2. Store tmp_lo into dst_lo
3. Sign extend tmp_lo into tmp_hi
4. Store tmp_hi to dst_hi
Example: r3 = (s32)r3
r3 is a stacked register
ldr r6, [r11, #-16] // Load r3_lo into tmp_lo
// str to dst_lo is not emitted because src_lo == dst_lo
asr r7, r6, #31 // Sign extend tmp_lo into tmp_hi
str r7, [r11, #-12] // Store tmp_hi into r3_hi
Case A.2: src is stacked but dst is not:
----------------------------------------
1. Load src_lo into dst_lo
2. Sign extend dst_lo into dst_hi
Example: r6 = (s32)r3
r6 maps to {ARM_R5, ARM_R4} and r3 is stacked
ldr r4, [r11, #-16] // Load r3_lo into r6_lo
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case A.3: src is not stacked but dst is stacked:
------------------------------------------------
1. Store src_lo into dst_lo
2. Sign extend src_lo into tmp_hi
3. Store tmp_hi to dst_hi
Example: r3 = (s32)r6
r3 is stacked and r6 maps to {ARM_R5, ARM_R4}
str r4, [r11, #-16] // Store r6_lo to r3_lo
asr r7, r4, #31 // Sign extend r6_lo into tmp_hi
str r7, [r11, #-12] // Store tmp_hi to dest_hi
Case A.4: Both src and dst are not stacked:
-------------------------------------------
1. Mov src_lo into dst_lo
2. Sign extend src_lo into dst_hi
Example: (bf) r6 = (s32)r6
r6 maps to {ARM_R5, ARM_R4}
// Mov not emitted because dst == src
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case B: offset != 32:
=====================
Case B.1: src and dst are stacked registers:
--------------------------------------------
1. Load src_lo into tmp_lo
2. Sign extend tmp_lo according to offset.
3. Store tmp_lo into dst_lo
4. Sign extend tmp_lo into tmp_hi
5. Store tmp_hi to dst_hi
Example: r9 = (s8)r3
r9 and r3 are both stacked registers
ldr r6, [r11, #-16] // Load r3_lo into tmp_lo
lsl r6, r6, #24 // Sign extend tmp_lo
asr r6, r6, #24 // ..
str r6, [r11, #-56] // Store tmp_lo to r9_lo
asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi
str r7, [r11, #-52] // Store tmp_hi to r9_hi
Case B.2: src is stacked but dst is not:
----------------------------------------
1. Load src_lo into dst_lo
2. Sign extend dst_lo according to offset.
3. Sign extend tmp_lo into dst_hi
Example: r6 = (s8)r3
r6 maps to {ARM_R5, ARM_R4} and r3 is stacked
ldr r4, [r11, #-16] // Load r3_lo to r6_lo
lsl r4, r4, #24 // Sign extend r6_lo
asr r4, r4, #24 // ..
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case B.3: src is not stacked but dst is stacked:
------------------------------------------------
1. Sign extend src_lo into tmp_lo according to offset.
2. Store tmp_lo into dst_lo.
3. Sign extend src_lo into tmp_hi.
4. Store tmp_hi to dst_hi.
Example: r3 = (s8)r1
r3 is stacked and r1 maps to {ARM_R3, ARM_R2}
lsl r6, r2, #24 // Sign extend r1_lo to tmp_lo
asr r6, r6, #24 // ..
str r6, [r11, #-16] // Store tmp_lo to r3_lo
asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi
str r7, [r11, #-12] // Store tmp_hi to r3_hi
Case B.4: Both src and dst are not stacked:
-------------------------------------------
1. Sign extend src_lo into dst_lo according to offset.
2. Sign extend dst_lo into dst_hi.
Example: r6 = (s8)r1
r6 maps to {ARM_R5, ARM_R4} and r1 maps to {ARM_R3, ARM_R2}
lsl r4, r2, #24 // Sign extend r1_lo to r6_lo
asr r4, r4, #24 // ..
asr r5, r4, #31 // Sign extend r6_lo to r6_hi
Fixes: fc832653fa ("arm32, bpf: add support for sign-extension mov instruction")
Reported-by: syzbot+186522670e6722692d86@syzkaller.appspotmail.com
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Closes: https://lore.kernel.org/all/000000000000e9a8d80615163f2a@google.com
Link: https://lore.kernel.org/bpf/20240419182832.27707-1-puranjay@kernel.org
To allow us extending the interface in the future.
Fixes: 44350256ab ("fuse: implement ioctls to manage backing files")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Starting with c23, 'constexpr' is a keyword in C like in C++ and cannot
be used as an identifier:
scripts/unifdef.c:206:25: error: 'constexpr' can only be used in variable declarations
206 | static bool constexpr; /* constant #if expression */
| ^
scripts/unifdef.c:880:13: error: expected identifier or '('
880 | constexpr = false;
| ^
Rename this instance to allow changing to C23 at some point in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-By: Tony Finch <dot@dotat.at>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The build rule for C is unused because 'obj-cvdso32' is not defined
in this Makefile.
If you add a C file into arch/parisc/kernel/vdso32/ in the future,
you can revert this commit. The kernel does not keep unused code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/9fbd788bbca4efd2f596e3c56d045db450756c80.1712755381.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/2765e090dba2d99f92e16c92b6aa55090aae053b.1712755381.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fixes the following two Coccinelle/coccicheck warnings reported by
badzero.cocci:
WARNING comparing pointer to 0
WARNING comparing pointer to 0
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240404192932.13075-2-thorsten.blum@toblux.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fixes the following Coccinelle/coccicheck warning reported by
swap.cocci:
WARNING opportunity for swap()
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240404112313.11898-2-thorsten.blum@toblux.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
An allmodconfig build of sparc32 resulted in several warnings:
WARNING: modpost: EXPORT symbol "empty_zero_page" [vmlinux] version generation failed, symbol will not be versioned.
Is "empty_zero_page" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "__udelay" [vmlinux] version generation failed, symbol will not be versioned.
Is "__udelay" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "__ndelay" [vmlinux] version generation failed, symbol will not be versioned.
Is "__ndelay" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "__ashldi3" [vmlinux] version generation failed, symbol will not be versioned.
Is "__ashldi3" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "__ashrdi3" [vmlinux] version generation failed, symbol will not be versioned.
Is "__ashrdi3" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "__lshrdi3" [vmlinux] version generation failed, symbol will not be versioned.
Is "__lshrdi3" prototyped in <asm/asm-prototypes.h>?
And later a lot of warnings like this:
WARNING: modpost: "__udelay" [kernel/locking/locktorture.ko] has no CRC!
WARNING: modpost: "__udelay" [kernel/rcu/rcutorture.ko] has no CRC!
WARNING: modpost: "__udelay" [kernel/rcu/rcuscale.ko] has no CRC!
WARNING: modpost: "__udelay" [kernel/rcu/refscale.ko] has no CRC!
WARNING: modpost: "__ndelay" [kernel/rcu/refscale.ko] has no CRC!
WARNING: modpost: "__udelay" [kernel/time/test_udelay.ko] has no CRC!
WARNING: modpost: "__udelay" [kernel/scftorture.ko] has no CRC!
WARNING: modpost: "__ashrdi3" [fs/quota/quota_tree.ko] has no CRC!
WARNING: modpost: "__ashldi3" [fs/ext4/ext4.ko] has no CRC!
The fix was, as hinted, to add missing prototypes to asm-prototypes.h.
For the __*di3 functions add the prototypes direct to the
asm-prototypes.h file.
Some of the symbols were already declared, so pulled in the relevant
headers (delay.h, pgtable.h).
The include files was alphabetically sorted to make the list somehow
readable.
The .S files exporting the symbols do not include asm-prototypes.h,
so they need to be explicit rebuild to generate symbol versioning.
One or more of the generic headers pulled in by asm-prototypes.h
did not support being used from .S files, so adding asm-prototypes.h
as an include file was not an option.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240324065622.GA1032122@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
The function hrtimer_hres_active() are defined in the hrtimer.c file, but
not called elsewhere, so rename __hrtimer_hres_active() to
hrtimer_hres_active() and remove the old hrtimer_hres_active() function.
kernel/time/hrtimer.c:653:19: warning: unused function 'hrtimer_hres_active'.
Fixes: 82ccdf062a ("hrtimer: Remove unused function")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20240418023000.130324-1-jiapeng.chong@linux.alibaba.com
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8778
The dmc_firmware_path parameter is clearly a display parameter. Move it
there so it's available to both i915 and xe modules. This also cleans up
the ugly member in struct xe_device.
v2:
- New try with the NULL/"" param value issue resolved
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c8223b68fdafbc72bee0bf5afdb2ab15261cf00.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The distinction between the dmc_firmware_path module param being NULL
and the empty string "" is problematic. It's not possible to set the
parameter back to NULL via sysfs or debugfs. Remove the distinction, and
consider NULL and the empty string to be the same thing, and use the
platform default for them.
This removes the possibility to disable DMC (and runtime PM) via
i915.dmc_firmware_path="". Instead, use "/dev/null" as the magic
firmware path to skip DMC firmware loading and disable runtime PM.
v2: Add support for i915.dmc_firmware_path="/dev/null" (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8695aca8a6643e36bb680bc2dcab97c637e70b00.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Return failures from parse_dmc_fw() instead of relying on
intel_dmc_has_payload(). Handle and error report them slightly better,
including a new error message for when the firmware does not contain the
main program.
v2: Print specific error message for payload not found (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18833681978ec3ac779cce943221cc5b532c7c45.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Clarify request_firmware() error handling. Don't proceed to trying to
parse non-existent firmware or check for payload when request_firmware()
failed to begin with. There's no reason to release_firmware() either
when request_firmware() failed.
Also move the message about DMC firmware homepage here, as in other
cases the user probably has some firmware, although its parsing fails
for some reason.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0654bb3480f8d2103225d26f665badead5495532.1713519628.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch correct calculation formula of PHY timing.
The spec define HS-PREPARE should be from 40ns+4*UI(44ns) to
85ns+6*UI(91ns). But current duration is 88ns and is near the boundary.
So this patch make the duration to 64ns so it is near the safe range.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240412031208.30688-1-shuijing.li@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Currently, plpks_confirm_object_flushed() function polls for 5msec in
total instead of 5sec.
Keep max polling time consistent for all the H_CALLs, which take longer
than expected, to be 5sec. Also, make use of fsleep() everywhere to
insert delay.
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240418031230.170954-1-nayna@linux.ibm.com
Nick Bowler reported:
When using newer kernels on my Ultra 60 with dual 450MHz UltraSPARC-II
CPUs, I noticed that only CPU 0 comes up, while older kernels (including
4.7) are working fine with both CPUs.
I bisected the failure to this commit:
9b2f753ec2 is the first bad commit
commit 9b2f753ec2
Author: Atish Patra <atish.patra@oracle.com>
Date: Thu Sep 15 14:54:40 2016 -0600
sparc64: Fix cpu_possible_mask if nr_cpus is set
This is a small change that reverts very easily on top of 5.18: there is
just one trivial conflict. Once reverted, both CPUs work again.
Maybe this is related to the fact that the CPUs on this system are
numbered CPU0 and CPU2 (there is no CPU1)?
The current code that adjust cpu_possible based on nr_cpu_ids do not
take into account that CPU's may not come one after each other.
Move the chech to the function that setup the cpu_possible mask
so there is no need to adjust it later.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 9b2f753ec2 ("sparc64: Fix cpu_possible_mask if nr_cpus is set")
Reported-by: Nick Bowler <nbowler@draconx.ca>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Link: https://lore.kernel.org/sparclinux/20201009161924.c8f031c079dd852941307870@gmx.de/
Link: https://lore.kernel.org/all/CADyTPEwt=ZNams+1bpMB1F9w_vUdPsGCt92DBQxxq_VtaLoTdw@mail.gmail.com/
Cc: stable@vger.kernel.org # v4.8+
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Atish Patra <atish.patra@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Vijay Kumar <vijay.ac.kumar@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-9-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fix the following warning:
arch/sparc/kernel/time_64.c:880:20: warning: no previous prototype for ‘sched_clock’
Add the missing include to pick up the prototype.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-8-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fix the following warnings:
arch/sparc/kernel/adi_64.c:124:21: warning: no previous prototype for ‘find_tag_store’
arch/sparc/kernel/adi_64.c:156:21: warning: no previous prototype for ‘alloc_tag_store’
arch/sparc/kernel/adi_64.c:299:6: warning: no previous prototype for ‘del_tag_store’
None of the functions were used outside the file, so declare them static.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-7-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fix the following warning:
sparc/kernel/pci_sun4v.c:259:15: warning: no previous prototype for ‘dma_4v_iotsb_bind’
The function dma_4v_iotsb_bind is not used outside the file, so declare
it static.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-6-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fix the following warning:
arch/sparc/kernel/uprobes.c:237:17: warning: no previous prototype for ‘uprobe_trap’
Add a prototype to kernel/kernel.h to silence the warning.
This is a fix already used for other trap handlers.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-5-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fix the following warning:
arch/sparc/kernel/setup_64.c:602:13: warning: no previous prototype for ‘alloc_irqstack_bootmem’
The function alloc_irqstack_bootmem had no users outside setup_64.c so
declare it static.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-4-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fix the following warning:
arch/sparc/mm/init_64.c:2644:6: warning: no previous prototype for ‘vmemmap_free’
The function vmemmap_free() is only used for systems with
CONFIG_MEMORY_HOTPLUG defined - and sparc64 do not support this.
Drop the empty function as it has no users.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-3-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fix the following warnings:
arch/sparc/kernel/traps_64.c:253:6: warning: no previous prototype for ‘is_no_fault_exception’
arch/sparc/kernel/traps_64.c:2035:6: warning: no previous prototype for ‘do_mcd_err’
rch/sparc/kernel/traps_64.c:2153:6: warning: no previous prototype for ‘sun4v_nonresum_error_user_handled’
In all cases make the function static as there were no users outside
traps_64.c
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-2-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fix the following warning:
arch/sparc/vdso/vma.c:246:12: warning: no previous prototype for ‘init_vdso_image’
init_vdso_image has no users outside vma.c, make it static.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240330-sparc64-warnings-v1-1-37201023ee2f@ravnborg.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Every other arch declares struct termio in asm/termios.h, so make sparc
match them.
Resolves a build failure in the PPP software package, which includes
both bits/ioctl-types.h via sys/ioctl.h (glibc) and asm/termbits.h.
Closes: https://bugs.gentoo.org/918992
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Cc: stable@vger.kernel.org
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240306171149.3843481-1-floppym@gentoo.org
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
In case there is no DP device attached to the port the
transfer function should return IO error, similar to what
other drivers do.
In case EAGAIN is returned then any read from /dev/drm_dp_aux
device ends up in an infinite loop as the upper layers
constantly repeats the transfer request.
Fixes: f70ac097a2 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Wojciech Macek <wmacek@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240417103819.990512-1-wmacek@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Just like the active interface and writeback block in ctl_intf_cfg_v1(),
and later the rest of the blocks in followup active-CTL fixes or
reworks, multiple calls to this function should enable additional DSC
blocks instead of overwriting the blocks that are enabled.
This pattern is observed in an active-CTL scenario since DPU 5.0.0 where
for example bonded-DSI uses a single CTL to drive multiple INTFs, and
each encoder calls this function individually with the INTF (hence the
pre-existing update instead of overwrite of this bitmask) and DSC blocks
it wishes to be enabled, and expects them to be OR'd into the bitmask.
The reverse already exists in reset_intf_cfg_v1() where only specified
DSC blocks are removed out of the CTL_DSC_ACTIVE bitmask (same for all
other blocks and ACTIVE bitmasks), leaving the rest enabled.
Fixes: 77f6da9048 ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/589902/
Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-4-78ae3ee9a697@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
When dual-DSI (bonded DSI) was added in commit ed9976a09b
("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints
were not updated, leading to print the original mode->clock rather
than the adjusted (typically the mode clock divided by two, though more
recently also adjusted for DSC compression) msm_host->pixel_clk_rate
which is passed to clk_set_rate() just below. Fix that by printing the
actual pixel_clk_rate that is being set.
Fixes: ed9976a09b ("drm/msm/dsi: adjust dsi timing for dual dsi mode")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/589896/
Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-1-78ae3ee9a697@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently the MSM DSI driver looks for the next bridge during
msm_dsi_modeset_init(). If the bridge is not registered at that point,
this might result in -EPROBE_DEFER, which can be problematic that late
during the device probe process. Move next bridge acquisition to the
dsi_bind state so that probe deferral is returned as early as possible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/582210/
Link: https://lore.kernel.org/r/20240309-fd-dsi-cleanup-bridges-v1-2-962ebdba82ed@linaro.org
The gen_header.py script is failing for older versions of python3 such
as python 3.5. Two issues observed with python 3.5 are ...
1. Python 3 versions prior to 3.6 do not support the f-string format.
2. Early python 3 versions do not support the 'required' argument for
the argparse add_subparsers().
Fix both of the above so that older versions of python 3 still work.
Fixes: 8f7abf0b86fe ("drm/msm: generate headers on the fly")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/589427/
Link: https://lore.kernel.org/r/20240412165407.42163-1-jonathanh@nvidia.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
