DisplayID spec v1.3 revision history notes do claim that
the toplogy block was added in v1.3 so requiring structure
v1.2 would seem correct, but there is at least one EDID in
edid.tv with a topology block and structure v1.0. And
there are also EDIDs with DisplayID structure v1.3 which
seems to be totally incorrect as DisplayID spec v1.3 lists
structure v1.2 as the only legal value.
Unfortunately I couldn't find copies of DisplayID spec
v1.0-v1.2 anywhere (even on vesa.org), so I'll have to
go on empirical evidence alone.
We used to parse the topology block on all v1.x
structures until the check for structure v2.0 was added.
Let's go back to doing that as the evidence does suggest
that there are DisplayIDs in the wild that would miss
out on the topology stuff otherwise.
Also toss out DISPLAY_ID_STRUCTURE_VER_12 entirely as
it doesn't appear we can really use it for anything.
I *think* we could technically skip all the structure
version checks as the block tags shouldn't conflict
between v2.0 and v1.x. But no harm in having a bit of
extra sanity checks I guess.
So far I'm not aware of any user reported regressions
from overly strict check, but I do know that it broke
igt/kms_tiled_display's fake DisplayID as that one
gets generated with structure v1.0.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: c5a486af9d ("drm/edid: parse Tiled Display Topology Data Block for DisplayID 2.0")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410180139.21352-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
When an ethX port is disabled in the device tree, an error is returned
by xdp_rxq_info_reg() function while transitioning the CPSW device to
the up state. The message 'Missing net_device from driver' is output.
This patch fixes the issue by registering xdp_rxq info only if ethX
port is enabled (i.e. ndev pointer is not NULL).
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://lore.kernel.org/all/260d258f-87a1-4aac-8883-aab4746b32d8@ti.com/
Reported-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Closes: https://gist.github.com/Siddharth-Vadapalli-at-TI/5ed0e436606001c247a7da664f75edee
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit dce0919c83 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
source at the same time") removed the setup of TINT from
rzg2l_irqc_irq_enable(). To address the spurious interrupt issue the
setup of TINT has been moved in rzg2l_tint_set_edge() through
rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
not properly re-configured after a suspend-to-RAM cycle. To address
this issue and avoid spurious interrupts while resumming set the
interrupt type before enabling it.
Fixes: dce0919c83 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240419063822.3467424-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable eMMC by default on the RZ/G3S SMARC platform, as previously done
on RZ/G2L boards and other Renesas platforms.
The SW_CONFIG2 setting selects between the uSD0 card and eMMC. By setting
SW_CONFIG2 to SW_OFF, we select eMMC by default.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240417112003.428348-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Now that we have enabled IRQC support for RZ/Five SoC switch to interrupt
mode for ethernet0/1 PHYs instead of polling mode.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240403203503.634465-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Now that we have added support for IRQC to both RZ/Five and RZ/G2UL SoCs
we can move the interrupt-parent for pinctrl node back to the common
shared r9a07g043.dtsi file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240403203503.634465-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On older (pre-MLD API) devices, we started also calling
iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(),
but of course not also iwl_mvm_remove_link(). Since the
link ID was only released in iwl_mvm_remove_link() this
causes us to run out of FW link IDs very quickly. Fix
it by releasing the link ID correctly.
Fixes: a8b5d4809b ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW")
Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These variables should be u32 instead of u64 because they're only
storing u32 values. Also static checkers complain when we do:
suspended_slots &= ~upd_ctx.timedout_mask;
In this code "suspended_slots" is a u64 and "upd_ctx.timedout_mask". The
mask clears out the top 32 bits which would likely be a bug if anything
were stored there.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/85356b15-4840-4e64-8c75-922cdd6a5fef@moroto.mountain
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The current structure of xfs_extent_busy_clear that locks the first busy
extent in each AG and unlocks when switching to a new AG makes sparse
unhappy as the lock critical section tracking can't cope with taking the
lock conditionally and inside a loop.
Rewrite xfs_extent_busy_clear so that it has an outer loop only advancing
when moving to a new AG, and an inner loop that consumes busy extents for
the given AG to make life easier for sparse and to also make this logic
more obvious to humans.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Move the handling of discarded entries into xfs_extent_busy_clear_one
to reuse the length check and tidy up the logic in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The function are defined in the rmap_repair.c file, but not called
elsewhere, so delete the unused function.
fs/xfs/scrub/rmap_repair.c:436:1: warning: unused function 'is_rt_data_fork'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8425
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The "mp" pointer is the same as "sc->mp" so this change doesn't affect
runtime at all. However, it's nicer to use same name for both the lock
and the unlock.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Sparse throws warnings about the interval tree functions that are
defined and then not used in the scrub bitmap code:
fs/xfs/scrub/bitmap.c:57:1: warning: unused function 'xbitmap64_tree_iter_next' [-Wunused-function]
INTERVAL_TREE_DEFINE(struct xbitmap64_node, bn_rbnode, uint64_t,
^
./include/linux/interval_tree_generic.h:151:33: note: expanded from macro 'INTERVAL_TREE_DEFINE'
ITSTATIC ITSTRUCT * \
^
<scratch space>:3:1: note: expanded from here
xbitmap64_tree_iter_next
^
fs/xfs/scrub/bitmap.c:331:1: warning: unused function 'xbitmap32_tree_iter_next' [-Wunused-function]
INTERVAL_TREE_DEFINE(struct xbitmap32_node, bn_rbnode, uint32_t,
^
./include/linux/interval_tree_generic.h:151:33: note: expanded from macro 'INTERVAL_TREE_DEFINE'
ITSTATIC ITSTRUCT * \
^
<scratch space>:59:1: note: expanded from here
xbitmap32_tree_iter_next
Fix these by marking the functions created by the interval tree
creation macro as __maybe_unused to suppress this warning.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Scrub checks the superblock version number against the known good
feature bits that can be set in the version mask. It calculates
the version mask to compare like so:
vernum_mask = cpu_to_be16(~XFS_SB_VERSION_OKBITS |
XFS_SB_VERSION_NUMBITS |
XFS_SB_VERSION_ALIGNBIT |
XFS_SB_VERSION_DALIGNBIT |
XFS_SB_VERSION_SHAREDBIT |
XFS_SB_VERSION_LOGV2BIT |
XFS_SB_VERSION_SECTORBIT |
XFS_SB_VERSION_EXTFLGBIT |
XFS_SB_VERSION_DIRV2BIT);
This generates a sparse warning:
fs/xfs/scrub/agheader.c:168:23: warning: cast truncates bits from constant value (ffff3f8f becomes 3f8f)
This is because '~XFS_SB_VERSION_OKBITS' is considered a 32 bit
constant, even though it's value is always under 16 bits.
This is a kinda silly thing to do, because:
/*
* Supported feature bit list is just all bits in the versionnum field because
* we've used them all up and understand them all. Except, of course, for the
* shared superblock bit, which nobody knows what it does and so is unsupported.
*/
#define XFS_SB_VERSION_OKBITS \
((XFS_SB_VERSION_NUMBITS | XFS_SB_VERSION_ALLFBITS) & \
~XFS_SB_VERSION_SHAREDBIT)
#define XFS_SB_VERSION_NUMBITS 0x000f
#define XFS_SB_VERSION_ALLFBITS 0xfff0
#define XFS_SB_VERSION_SHAREDBIT 0x0200
XFS_SB_VERSION_OKBITS has a value of 0xfdff, and so
~XFS_SB_VERSION_OKBITS == XFS_SB_VERSION_SHAREDBIT. The calculated
mask already sets XFS_SB_VERSION_SHAREDBIT, so starting with
~XFS_SB_VERSION_OKBITS is completely redundant....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
When SPI transfer is being prepared, the spi-s3c64xx driver will call
clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK
is a gate (leaf) clock, so it must propagate the rate change up the
clock tree, so that corresponding MUX/DIV clocks can actually change
their values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for
all USI instances in GS101 PERIC1: USI{0, 9, 10, 11, 12, 13}. This change
involves the following clocks:
PERIC1 USI*:
Clock Div range MUX Selection
-------------------------------------------------------------------
gout_peric1_peric1_top0_ipclk_* - -
dout_peric1_usi*_usi /1..16 -
mout_peric1_usi*_usi_user - {24.5 MHz, 400 MHz}
With input clock of 400 MHz this scheme provides the following IPCLK
rate range, for each USI block:
PERIC1 USI*: 1.5 MHz ... 400 MHz
Accounting for internal /4 divider in SPI blocks, and because the max
SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates:
PERIC1 USI_SPI*: 384 KHz ... 49.9 MHz
Which shall be fine for the applications of the SPI bus.
Note that with this we allow the reparenting of the MUX_USIx clocks to
OSCCLK. Each instance of the USI IP has its own MUX_USI clock, thus the
reparenting of a MUX_USI clock corresponds to a single instance of the
USI IP. The datasheet mentions OSCCLK just in the low-power mode
context, but the downstream driver reparents too the MUX_USI clocks to
OSCCLK. Follow the downstream driver and do the same.
Fixes: 2999e786d7 ("clk: samsung: gs101: add support for cmu_peric1")
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240419100915.2168573-3-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Introduce nMUX() for MUX clocks that can be reparented on clock rate
change. "nMUX" comes from "n-to-1 selector", hopefully emphasising that
the selector can change on clock rate changes. Ideally MUX/MUX_F()
should change to not have the CLK_SET_RATE_NO_REPARENT flag set by
default, and all their users to be updated to add the flag back
(like in the case of DIV and GATE). But this is a very intrusive change
and because for now only GS101 allows MUX reparenting on clock rate
change, stick with nMUX().
GS101 defines MUX clocks that are dedicated for each instance of the IP.
One example is USI IP (SPI, I2C, serial). The reparenting of these MUX
clocks will not affect other instances of the same IP or different IPs
altogether.
When SPI transfer is being prepared, the spi-s3c64xx driver will call
clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK
is a gate (leaf) clock, so it must propagate the rate change up the
clock tree, so that corresponding MUX/DIV clocks can actually change
their values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for
all USI instances in GS101 PERIC0: USI{1-8, 14}. This change involves the
following clocks:
PERIC0 USI*:
Clock Div range MUX Selection
-------------------------------------------------------------------
gout_peric0_peric0_top0_ipclk_* - -
dout_peric0_usi*_usi /1..16 -
mout_peric0_usi*_usi_user - {24.5 MHz, 400 MHz}
With input clock of 400 MHz this scheme provides the following IPCLK
rate range, for each USI block:
PERIC0 USI*: 1.5 MHz ... 400 MHz
Accounting for internal /4 divider in SPI blocks, and because the max
SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates:
PERIC0 USI_SPI*: 384 KHz ... 49.9 MHz
Fixes: 893f133a04 ("clk: samsung: gs101: add support for cmu_peric0")
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240419100915.2168573-2-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add pm_runtime support for power saving. In pm runtime suspend
state the registers will be reseted, so add registers save
in pm runtime suspend and restore them in pm runtime resume.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/1711026842-7268-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
For RV32, used_hw_ctrs can have more than 1 word if the firmware chooses
to interleave firmware/hardware counters indicies. Even though it's a
unlikely scenario, handle that case by iterating over all the words
instead of just using the first word.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-9-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
As per the SBI specification, minor version is encoded in the
lower 24 bits only. Make sure that the SBI version is computed
with the appropriate mask.
Currently, there is no minor version in use. Thus, it doesn't
change anything functionality but it is good to be compliant with
the specification.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-8-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI_STA_SHMEM_DISABLE is a macro to invoke disable shared memory
commands. As this can be invoked from other SBI extension context
as well, rename it to more generic name as SBI_SHMEM_DISABLE.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-7-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI PMU Snapshot function optimizes the number of traps to
higher privilege mode by leveraging a shared memory between the S/VS-mode
and the M/HS mode. Add the definitions for that extension and new error
codes.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-6-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
It is a good practice to use BIT() instead of (1 << x).
Replace the current usages with BIT().
Take this opportunity to replace few (1UL << x) with BIT() as well
for consistency.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-5-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI v2.0 introduced a explicit function to read the upper 32 bits
for any firmware counter width that is longer than 32bits.
This is only applicable for RV32 where firmware counter can be
64 bit.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-4-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI v2.0 added another function to SBI PMU extension to read
the upper bits of a counter with width larger than XLEN.
Add the definition for that function.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-3-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.
Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the Dahlia and Development carrier boards for the Verdin family
(iMX8MM and iMX8MP), WM8904 and NAU8822 codecs are used. Instead of
module-specific names, switch to more generic names based on the codec
employed on the carrier board itself.
This modification facilitates access to ALSA card names, ensuring
consistency across iMX8MP and iMX8MM, as they share the same carrier
board.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix another deadlock related to the merge path; previously, we switched
to always running merges at a lower watermark (because they are
noncritical); but when we run at a lower watermark we also need to run
nonblocking or we've introduced a new deadlock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-and-tested-by: s@m-h.ug
Originally, the use of kvm->lock in SBI_EXT_HSM_HART_START also avoids
the simultaneous updates to the reset context of target VCPU. Since this
lock has been replace with vcpu->mp_state_lock, and this new lock also
protects the vcpu->mp_state. We have to add a separate lock for
vcpu->reset_cntx.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-3-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Documentation/virt/kvm/locking.rst advises that kvm->lock should be
acquired outside vcpu->mutex and kvm->srcu. However, when KVM/RISC-V
handling SBI_EXT_HSM_HART_START, the lock ordering is vcpu->mutex,
kvm->srcu then kvm->lock.
Although the lockdep checking no longer complains about this after commit
f0f44752f5 ("rcu: Annotate SRCU's update-side lockdep dependencies"),
it's necessary to replace kvm->lock with a new dedicated lock to ensure
only one hart can execute the SBI_EXT_HSM_HART_START call for the target
hart simultaneously.
Additionally, this patch also rename "power_off" to "mp_state" with two
possible values. The vcpu->mp_state_lock also protects the access of
vcpu->mp_state.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-2-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The onboard_usb_hub driver has been updated to support non-hub devices,
which has led to some renaming.
Update to the new name (ONBOARD_USB_DEV) accordingly.
Based on similar fixes done by Javier Carrasco for other defconfigs.
Fixes: 0bb36055c0 ("ARM: imx_v6_v7_defconfig: Select CONFIG_USB_ONBOARD_HUB")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Exchange fallback and specific compatible string for spdif sound card.
The specific compatible string needs to be in first place, the fallback
compatible string needs to be in the end.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add i2c{1,6} sda-/scl-gpios with the corresponding pinmux entries.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Previously, we had the sleep-moci pin set to always on. However, the
Dahlia carrier board supports disabling the sleep-moci when the system
is suspended to power down peripherals that support it. This reduces
overall power consumption. This commit adds support for this feature by
disabling the reg_force_sleep_moci regulator and adding two new
regulators for the USB hub and PCIe that can be turned off when the
system is suspended.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Verdin family has a signal called sleep-moci which can be used to
turn off peripherals on the carrier board when the SoM goes into
suspend. So far we have hogged this signal, which means the peripherals
are always on and it is not possible to add peripherals that depend on
the sleep-moci to be on. With this change, we replace the hog with a
regulator so that peripherals can add their own regulators that use the
same gpio. Carrier boards that allow peripherals to be powered off in
suspend can disable this regulator and implement their own regulator to
control the sleep-moci.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Previously, we had the sleep-moci pin set to always on. However, the
Dahlia carrier board supports disabling the sleep-moci when the system
is suspended to power down peripherals that support it. This reduces
overall power consumption. This commit adds support for this feature by
disabling the reg_force_sleep_moci regulator and adding two new
regulators for the USB hub and PCIe that can be turned off when the
system is suspended.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Verdin family has a signal called sleep-moci which can be used to
turn off peripherals on the carrier board when the SoM goes into
suspend. So far we have hogged this signal, which means the peripherals
are always on and it is not possible to add peripherals that depend on
the sleep-moci to be on. With this change, we replace the hog with a
regulator so that peripherals can add their own regulators that use the
same gpio. Carrier boards that allow peripherals to be powered off in
suspend can disable this regulator and implement their own regulator to
control the sleep-moci.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
