Implement polling for VGA and SIL164 connectors. Set the flag
DRM_CONNECTOR_POLL_DISCONNECT for each to detect the removal of the
monitor cable. Implement struct drm_connector_helper_funcs.detect_ctx
for each type of connector by testing for EDID data.
The helper drm_connector_helper_detect_ctx() implements .detect_ctx()
on top of the connector's DDC channel. The function can be used by
other drivers as companion to drm_connector_helper_get_modes().
v6:
- change helper name to drm_connector_helper_detec_from_ddc()
(Maxime, Sui)
v5:
- share implementation in drm_connector_helper_detect_ctx() (Maxime)
- test for DDC presence with drm_probe_ddc() (Maxime, Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-13-tzimmermann@suse.de
The .get_modes() code for VGA and SIL164 connectors does not depend
on either type of connector. Replace the driver code with the common
helper drm_connector_helper_get_modes(). It reads EDID data via
DDC and updates the connector's EDID property.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-12-tzimmermann@suse.de
The modeset lock protects the DDC code from concurrent modeset
operations, which use the same registers. Move that code from the
connector helpers into the DDC helpers .pre_xfer() and .post_xfer().
Both, .pre_xfer() and .post_xfer(), enclose the transfer of data blocks
over the I2C channel in the internal I2C function bit_xfer(). Both
calls are executed unconditionally if present. Invoking DDC transfers
from any where within the driver now takes the lock.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-11-tzimmermann@suse.de
Align the names of the algo-bit helpers with ast's convention of
using an ast prefix plus the struct's name plus the callback's name
for such function symbols. Change the parameter names of these
helpers to 'data' and 'state', as used in the declaration of struct
i2c_algo_bit_data. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-10-tzimmermann@suse.de
The DDC code needs the AST device. Store a pointer in struct ast_ddc
and avoid internal upcasts. Improves type safety within the DDC code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-9-tzimmermann@suse.de
The DDC code needs the AST device. Pass it to ast_ddc_create() and
avoid an internal upcast. Improves type safety within the DDC code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-8-tzimmermann@suse.de
The struct struct ast_i2c_chan represents the Display Data Channel
(DDC); I2C is the underlying bus. Rename the structure, the variables
and the helper ast_i2c_create() to ddc-like terms. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-7-tzimmermann@suse.de
Rename ast_i2c.c to ast_ddc.c and move its interface into the
new header ast_ddc.h. Update all include statements as necessary
and change the adapter name to 'AST DDC bus'.
This avoids including I2C headers in the driver's main header file,
which doesn't need them. Renaming files to _ddc indicates that the
code is about the DDC. I2C is really just the underlying bus here.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-6-tzimmermann@suse.de
Replace kzalloc() with drmm_kzalloc() and thereby put the release of
the I2C instance into a separate action. Avoids explicit error roll-
back in ast_i2c_chan_create(). No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-5-tzimmermann@suse.de
Expect the hardware to provide a DDC channel. Fail probing if its
initialization fails. Failing to initialize the DDC indicates a
larger problem, so there's no point in continuing.
v4:
* give a rational in the commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-3-tzimmermann@suse.de
Include <linux/of.h> to get of_property_read_u32() in the source
files that need it. Avoids the proxy include via <linux/i2c.h>.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-2-tzimmermann@suse.de
Intoduce helpers to work with mana ib queues (struct mana_ib_queue).
A queue always consists of umem, gdma_region, and id.
A queue can become a WQ or a CQ.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1711483688-24358-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The dmc_firmware_path parameter is clearly a display parameter. Move it
there so it's available to both i915 and xe modules. This also cleans up
the ugly member in struct xe_device.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321161856.3517856-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use localized __diag_push(), __diag_ignore_all() with rationale, and
__diag_pop() for specific initializations instead of blanket disabling
of -Woverride-init across several files.
Note that we've tried this before with commit 88e9664434 ("drm/i915:
use localized __diag_ignore_all() instead of per file") and reverted in
commit 290d161045 ("Revert "drm/i915: use localized
__diag_ignore_all() instead of per file""). The issue turned out to be
in __diag_ignore_all() and it was fixed by commit 689b097a06
("compiler-gcc: Suppress -Wmissing-prototypes warning for all supported
GCC"). So we should be able to pull this off now.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102455.944131-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Clang warns (or errors with CONFIG_WERROR):
drivers/gpu/drm/panthor/panthor_sched.c:2048:6: error: variable 'csg_mod_mask' set but not used [-Werror,-Wunused-but-set-variable]
2048 | u32 csg_mod_mask = 0, free_csg_slots = 0;
| ^
1 error generated.
The variable is an artifact left over from refactoring that occurred
during the development of the initial series for this driver. Remove it
to resolve the warning.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328-panthor-drop-csg_mod_mask-v1-1-5a80be3df581@kernel.org
There's no reason for _irq_suspend/resume() to be called after the
device has been unplugged, and keeping this dev_enter/exit()
section in _irq_suspend() is turns _irq_suspend() into a NOP
when called from the _unplug() functions, which we don't want.
v3:
- New patch
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326111205.510019-3-boris.brezillon@collabora.com
Make sure we set suspended=true last to avoid generating an irq storm
in the unlikely case where an IRQ happens between the suspended=true
assignment and the _INT_MASK update.
We also move the mask=0 assignment before writing to the _INT_MASK
register to prevent the thread handler from unmasking the interrupt
behind our back. This means we might lose events if there were some
pending when we get to suspend the IRQ, but that's fine.
The synchronize_irq() we have in the _irq_suspend() path was not
there to make sure all IRQs are processed, just to make sure we don't
have registers accesses coming from the irq handlers after
_irq_suspend() has been called. If there's a need to have all pending
IRQs processed, it should happen before _irq_suspend() is called.
v3:
- Add Steve's R-b
v2:
- New patch
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Reported-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326111205.510019-2-boris.brezillon@collabora.com
When mapping an IO region, the pseudo-file offset is dependent on the
userspace architecture. panthor_device_mmio_offset() abstracts that
away for us by turning a userspace MMIO offset into its kernel
equivalent, but we were not updating vm_area_struct::vm_pgoff
accordingly, leading us to attach the MMIO region to the wrong file
offset.
This has implications when we start mixing 64 bit and 32 bit apps, but
that's only really a problem when we start having more that 2^43 bytes of
memory allocated, which is very unlikely to happen.
What's more problematic is the fact this turns our
unmap_mapping_range(DRM_PANTHOR_USER_MMIO_OFFSET) calls, which are
supposed to kill the MMIO mapping when entering suspend, into NOPs.
Which means we either keep the dummy flush_id mapping active at all
times, or we risk a BUS_FAULT if the MMIO region was mapped, and the
GPU is suspended after that.
Solve that by patching vm_pgoff early in panthor_mmap(). With
this in place, we no longer need the panthor_device_mmio_offset()
helper.
v3:
- No changes
v2:
- Kill panthor_device_mmio_offset()
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Reported-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/10835
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326111205.510019-1-boris.brezillon@collabora.com
Current THREAD_SIZE_ORDER implementation is not generic.
Improve it by:
- Defining THREAD_SIZE_ORDER based on the specific platform config,
- Calculating THREAD_SIZE from THREAD_SIZE_ORDER.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240304085455.125063-1-dawei.li@shingroup.cn
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Convert the ahci-da850 bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Fixes the realtek quirk to initialise the Cirrus amp correctly and adds
related quirk for missing DSD properties. This model laptop has slightly
updated internals compared to the previous version with Realtek Codec
ID of 0x1caf.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Message-ID: <20240402015126.21115-1-luke@ljones.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch addresses an issue with the Panasonic CF-SZ6's existing quirk,
specifically its headset microphone functionality. Previously, the quirk
used ALC269_FIXUP_HEADSET_MODE, which does not support the CF-SZ6's design
of a single 3.5mm jack for both mic and audio output effectively. The
device uses pin 0x19 for the headset mic without jack detection.
Following verification on the CF-SZ6 and discussions with the original
patch author, i determined that the update to
ALC269_FIXUP_ASPIRE_HEADSET_MIC is the appropriate solution. This change
is custom-designed for the CF-SZ6's unique hardware setup, which includes
a single 3.5mm jack for both mic and audio output, connecting the headset
microphone to pin 0x19 without the use of jack detection.
Fixes: 0fca97a29b ("ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk")
Signed-off-by: I Gede Agastya Darma Laksana <gedeagas22@gmail.com>
Cc: <stable@vger.kernel.org>
Message-ID: <20240401174602.14133-1-gedeagas22@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes the sound not working from internal speakers on
Lenovo Legion Slim 7 16ARHA7 models. The correct subsystem ID
have been added to cs35l41_hda_property.c and patch_realtek.c.
Signed-off-by: Christian Bendiksen <christian@bendiksen.me>
Cc: <stable@vger.kernel.org>
Message-ID: <20240401122603.6634-1-christian@bendiksen.me>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As already anticipated in the original commit, playback was broken for
very short samples. I just didn't expect it to be an actual problem,
because we're talking about less than 1.5 milliseconds here. But clearly
such wavetable samples do actually exist.
The problem was that for such short samples we'd set the current
position beyond the end of the loop, so we'd run off the end of the
sample and play garbage.
This is a bigger (more audible) problem than the original one, which was
that we'd start playback with garbage (whatever was still in the cache),
which would be mostly masked by the note's attack phase.
So revert to the old behavior for now. We'll subsequently fix it
properly with a bigger patch series.
Note that this isn't a full revert - the dead code is not re-introduced,
because that would be silly.
Fixes: df335e9a8b ("ALSA: emu10k1: fix synthesizer sample playback position and caching")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218625
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240401145805.528794-1-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Probably due to a firmware bug Dell TB16 dock announces that one of its
DisplayPort adapters is actually DP IN. Now this is possible and used
with some external GPUs but not likely in this case as we are dealing
with a dock. Anyways the problem is that the driver tries to create a
DisplayPort tunnel between adapters of the same router which then shows
to user that there is no picture on the display (because there are no
available DP OUT adapters on the dock anymore).
Fix this by not creating DisplayPort tunnels between adapters that are
on the same router.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10265
Fixes: 274baf695b ("thunderbolt: Add DP IN added last in the head of the list of DP resources")
Cc: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
No longer hold RTNL while calling inet6_dump_fib().
Also change return value for a completed dump,
so that NLMSG_DONE can be appended to current skb,
saving one recvmsg() system call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240329183053.644630-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genetlink.h is a shell of what used to be a combined uAPI
and kernel header over a decade ago. It has fewer than
10 lines of code. Merge it into net/genetlink.h.
In some ways it'd be better to keep the combined header
under linux/ but it would make looking through git history
harder.
Acked-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20240329175710.291749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only legit reason I could think of for net/genetlink.h
and linux/genetlink.h to be separate would be if one was
included by other headers and we wanted to keep it lightweight.
That is not the case, net/openvswitch/meter.h includes
linux/genetlink.h but for no apparent reason (for struct genl_family
perhaps? it's not necessary, types of externs do not need
to be known).
Link: https://lore.kernel.org/r/20240329175710.291749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are things in linux/genetlink.h which are only used
under net/netlink/. Move them to a new local header.
A new header with just 2 externs isn't great, but alternative
would be to include af_netlink.h in genetlink.c which feels
even worse.
Link: https://lore.kernel.org/r/20240329175710.291749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-29 (net: intel)
This series contains updates to most Intel drivers.
Jesse moves declaration of pci_driver struct to remove need for forward
declarations in igb and converts Intel drivers to user newer power
management ops.
Sasha reworks power management flow on igc to avoid using rtnl_lock()
during those flows.
Maciej reorganizes i40e_nvm file to avoid forward declarations.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: avoid forward declarations in i40e_nvm.c
igc: Refactor runtime power management flow
net: intel: implement modern PM ops declarations
igb: simplify pci ops declaration
====================
Link: https://lore.kernel.org/r/20240329175632.211340-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 73d9629e1c ("i40e: Do not allow untrusted VF to remove
administratively set MAC") fixed an issue where untrusted VF was
allowed to remove its own MAC address although this was assigned
administratively from PF. Unfortunately the introduced check
is wrong because it causes that MAC filters for other MAC addresses
including multi-cast ones are not removed.
<snip>
if (ether_addr_equal(addr, vf->default_lan_addr.addr) &&
i40e_can_vf_change_mac(vf))
was_unimac_deleted = true;
else
continue;
if (i40e_del_mac_filter(vsi, al->list[i].addr)) {
...
</snip>
The else path with `continue` effectively skips any MAC filter
removal except one for primary MAC addr when VF is allowed to do so.
Fix the check condition so the `continue` is only done for primary
MAC address.
Fixes: 73d9629e1c ("i40e: Do not allow untrusted VF to remove administratively set MAC")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240329180638.211412-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can change inet_csk() to propagate its argument const qualifier,
thanks to container_of_const().
We have to fix few places that had mistakes, like tcp_bound_rto().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240329144931.295800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald Hunter says:
====================
doc: netlink: Add hyperlinks to generated docs
Extend ynl-gen-rst to generate hyperlinks to definitions, attribute sets
and sub-messages from all the places that reference them.
====================
Link: https://lore.kernel.org/r/20240329135021.52534-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tc spec referenced tc-u32-mark and tc-act-police-attrs but did not
define them. The missing definitions were discovered when building the
docs with generated hyperlinks because the hyperlink target labels were
missing.
Add definitions for tc-u32-mark and tc-act-police-attrs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240329135021.52534-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update ynl-gen-rst to generate hyperlinks to definitions, attribute
sets and sub-messages from all the places that reference them.
Note that there is a single label namespace for all of the kernel docs.
Hyperlinks within a single netlink doc need to be qualified by the
family name to avoid collisions.
The label format is 'family-type-name' which gives, for example,
'rt-link-attribute-set-link-attrs' as the link id.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240329135021.52534-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tables of contents in the generated Netlink docs include individual
attribute definitions. This can make the contents exceedingly long and
repeats a lot of what is on the rest of the pages. See for example:
https://docs.kernel.org/networking/netlink_spec/tc.html
Add a depth limit to the contents directive in generated .rst files to
limit the contents depth to 3 levels. This reduces the contents to:
- Family
- Summary
- Operations
- op-one
- op-two
- ...
- Definitions
- struct-one
- struct-two
- enum-one
- ...
- Attribute sets
- attrs-one
- attrs-two
- ...
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240329135021.52534-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: fix fallback MIB counter and wrong var in selftests
Here are two fixes related to MPTCP.
The first patch fixes when the MPTcpExtMPCapableFallbackACK MIB counter
is modified: it should only be incremented when a connection was using
MPTCP options, but then a fallback to TCP has been done. This patch also
checks the counter is not incremented by mistake during the connect
selftests. This counter was wrongly incremented since its introduction
in v5.7.
The second patch fixes a wrong parsing of the 'dev' endpoint options in
the selftests: the wrong variable was used. This option was not used
before, but it is going to be soon. This issue is visible since v5.18.
====================
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-0-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly.
If calling it in the 2nd test of endpoint_tests() too, it fails with an
error like this:
creation [FAIL] expected '10.0.2.2 id 2 subflow dev dev' \
found '10.0.2.2 id 2 subflow dev ns2eth2'
The reason is '$2' should be set to 'dev', not '$1'. This patch fixes it.
Fixes: 69c6ce7b6e ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-2-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current MPTCP servers increment MPTcpExtMPCapableFallbackACK when they
accept non-MPC connections. As reported by Christoph, this is "surprising"
because the counter might become greater than MPTcpExtMPCapableSYNRX.
MPTcpExtMPCapableFallbackACK counter's name suggests it should only be
incremented when a connection was seen using MPTCP options, then a
fallback to TCP has been done. Let's do that by incrementing it when
the subflow context of an inbound MPC connection attempt is dropped.
Also, update mptcp_connect.sh kselftest, to ensure that the
above MIB does not increment in case a pure TCP client connects to a
MPTCP server.
Fixes: fc518953bc ("mptcp: add and use MIB counter infrastructure")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/449
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-1-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netdev CI runs in a VM and captures serial, so stdout and
stderr get combined. Because there's a missing new line in
stderr the test ends up corrupting KTAP:
# Successok 1 selftests: net: reuseaddr_conflict
which should have been:
# Success
ok 1 selftests: net: reuseaddr_conflict
Fixes: 422d8dc6fd ("selftest: add a reuseaddr test")
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240329160559.249476-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
