Justin Chen says:
====================
net: bcmasp: phy managements fixes
Fix two issues.
- The unimac may be put in a bad state if PHY RX clk doesn't exist
during reset. Work around this by bringing the unimac out of reset
during phy up.
- Remove redundant phy_{suspend/resume}
====================
Link: https://lore.kernel.org/r/20240325193025.1540737-1-justin.chen@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
phy_{suspend/resume} is redundant. It gets called from phy_{stop/start}.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The unimac requires the PHY RX clk during reset or it may be put
into a bad state. Bring up the unimac after link up to ensure the
PHY RX clk exists.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Other pins have _a or _x suffix, but this one doesn't have any. Most
likely this is a typo.
Fixes: dabad1ff85 ("pinctrl: meson: add pinctrl driver support for Meson-A1 SoC")
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Message-ID: <20240325113058.248022-1-jan.dakinevich@salutedevices.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On reworking and splitting the at803x driver, in splitting function of
at803x PHYs it was added a NULL dereference bug where priv is referenced
before it's actually allocated and then is tried to write to for the
is_1000basex and is_fiber variables in the case of at8031, writing on
the wrong address.
Fix this by correctly setting priv local variable only after
at803x_probe is called and actually allocates priv in the phydev struct.
Reported-by: William Wortel <wwortel@dorpstraat.com>
Cc: <stable@vger.kernel.org>
Fixes: 25d2ba9400 ("net: phy: at803x: move specific at8031 probe mode check to dedicated probe")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240325190621.2665-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Access to root_domainoverutilized is always used with sched_energy_enabled in
the pattern:
if (sched_energy_enabled && !overutilized)
do something
So modify the helper function to utilize this pattern. This is more
readable code as it would say, do something when root domain is not
overutilized. This function always return true when EAS is disabled.
No change in functionality intended.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240326152616.380999-1-sshegde@linux.ibm.com
Add support for qcom,pmih0108-gpio and qcom,pmd8028-gpio.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Message-ID: <20240326220628.2392802-5-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for qcom,pmxr2230-gpio and qcom,pm6450-gpio.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Message-ID: <20240326220628.2392802-4-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include compatible strings for PMIH0108 and PMD8028 PMICs.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240326220628.2392802-3-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the Qualcomm Technologies, Inc. PMIC GPIO binding documentation
to include compatible strings for PMXR2230 and PM6450 PMICs.
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Acked-by: Krzystof Kozlowski <krzystof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240326220628.2392802-2-quic_amelende@quicinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-----BEGIN PGP SIGNATURE-----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=sQm5
-----END PGP SIGNATURE-----
Merge tag 'nf-24-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 reject destroy chain command to delete device hooks in netdev
family, hence, only delchain commands are allowed.
Patch #2 reject table flag update interference with netdev basechain
hook updates, this can leave hooks in inconsistent
registration/unregistration state.
Patch #3 do not unregister netdev basechain hooks if table is dormant.
Otherwise, splat with double unregistration is possible.
Patch #4 fixes Kconfig to allow to restore IP_NF_ARPTABLES,
from Kuniyuki Iwashima.
There are a more fixes still in progress on my side that need more work.
* tag 'nf-24-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
====================
Link: https://lore.kernel.org/r/20240328031855.2063-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The register offset to disable the internal pull-down of GPIOR~T is 0x630
instead of 0x620, as specified in the Ast2600 datasheet v15
The datasheet can download from the official Aspeed website.
Fixes: 15711ba6ff ("pinctrl: aspeed-g6: Add AST2600 pinconf support")
Reported-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-ID: <20240313092809.2596644-1-billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Sz5u
-----END PGP SIGNATURE-----
Merge tag 'for-net' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2024-03-27
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 5 files changed, 26 insertions(+), 3 deletions(-).
The main changes are:
1) Fix bloom filter value size validation and protect the verifier
against such mistakes, from Andrei.
2) Fix build due to CONFIG_KEXEC_CORE/CRASH_DUMP split, from Hari.
3) Update bpf_lsm maintainers entry, from Matt.
* tag 'for-net' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
====================
Link: https://lore.kernel.org/r/20240328012938.24249-1-alexei.starovoitov@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The BCM2711 allows to read the bias config. So implement pin_conf_get
accordingly. The pull resistor values has been taken from the
BCM2711/7211 datasheet.
This implementation assumes that BCM7211 behaves the same way.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-ID: <20240307070113.4888-3-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Even the driver already has implemented pin_dbg_show, it could
be helpful to implement pin_conf_get for a more generic behavior.
Contrary to the BCM2711, the BCM2835 SOC doesn't allow to read
the bias config, so the implementation is limited to the basics.
Keep ENOTSUPP here, because it's only used internally.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Message-ID: <20240307070113.4888-2-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since pin control provides a generic data type for the pin group,
use it in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20240311142346.1261203-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since pin control provides a generic data type for the pin function,
use it in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20240311140833.1168742-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rebinding might allocate page-table bos, causing evictions.
To support blocking locking during these evictions,
perform the rebinding in the drm_exec locking loop.
Also Reserve fence slots where actually needed rather than trying to
predict how many fence slots will be needed over a complete
wound-wait transaction.
v2:
- Remove a leftover call to xe_vm_rebind() (Matt Brost)
- Add a helper function xe_vm_validate_rebind() (Matt Brost)
v3:
- Add comments and squash with previous patch (Matt Brost)
Fixes: 24f947d58f ("drm/xe: Use DRM GPUVM helpers for external- and evicted objects")
Fixes: 29f424eb87 ("drm/xe/exec: move fence reservation")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-5-thomas.hellstrom@linux.intel.com
They can actually complete out-of-order, so allocate a unique
fence context for each fence.
Fixes: 5387e865d9 ("drm/xe: Add TLB invalidation fence after rebinds issued from execs")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-4-thomas.hellstrom@linux.intel.com
Instead of handling the vm's rebind fence separately,
which is error prone if they are not strictly ordered,
attach rebind fences as kernel fences to the vm's resv.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-3-thomas.hellstrom@linux.intel.com
For each rebind we insert a GuC TLB invalidation and add a
corresponding unordered TLB invalidation fence. This might
add a huge number of TLB invalidation fences to wait for so
rather than doing that, defer the TLB invalidation to the
next ring ops for each affected exec queue. Since the TLB
is invalidated on exec_queue switch, we need to invalidate
once for each affected exec_queue.
v2:
- Simplify if-statements around the tlb_flush_seqno.
(Matthew Brost)
- Add some comments and asserts.
Fixes: 5387e865d9 ("drm/xe: Add TLB invalidation fence after rebinds issued from execs")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-2-thomas.hellstrom@linux.intel.com
When iDMA 64-bit device is powered off, the IRQ status register
is all 1:s. This is never happen in real case and signalling that
the device is simply powered off. Don't try to serve interrupts
that are not ours.
Fixes: 667dfed986 ("dmaengine: add a driver for Intel integrated DMA 64-bit")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Closes: https://lore.kernel.org/r/700bbb84-90e1-4505-8ff0-3f17ea8bc631@gmail.com
Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240321120453.1360138-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing residual calculation returns an incorrect value when
bytes_xfer == bytes_req. This scenario occurs particularly with drivers
like UART where DMA is scheduled for maximum number of bytes and is
terminated when the bytes inflow stops. At higher baud rates, it could
request the tx_status while there is no bytes left to transfer. This will
lead to incorrect residual being set. Hence return residual as '0' when
bytes transferred equals to the bytes requested.
Fixes: ee17028009 ("dmaengine: tegra: Add tegra gpcdma driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240315124411.17582-1-akhilrajeev@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When building with 'make W=1', clang notices that the computed register
values are never actually written back but instead the wrong variable
is set:
drivers/dma/owl-dma.c:244:6: error: variable 'regval' set but not used [-Werror,-Wunused-but-set-variable]
244 | u32 regval;
| ^
drivers/dma/owl-dma.c:268:6: error: variable 'regval' set but not used [-Werror,-Wunused-but-set-variable]
268 | u32 regval;
| ^
Change these to what was most likely intended.
Fixes: 47e20577c2 ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240322132116.906475-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Gustavo Pimentel seems to have left Synopsys, so his email is bouncing.
And there is no indication from him expressing willingness to
continue contributing to the driver.
So let's drop him from the MAINTAINERS entry.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240326085256.12639-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 22a9d95858 ("dmaengine: pl330: issue_pending waits
until WFP state") as it seems to cause regression in pl330 driver.
Note the issue now exists in mainline so a fix to be done.
Cc: stable@vger.kernel.org
Reported-by: karthikeyan <karthikeyan@linumiz.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Set interrupt type to level low to correctly describe the hardware and
do not rely on the driver to do the right thing.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Correctly describe the interrupt as level low. Driver enforces that
anyways, but do not rely on that in the devicetree.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the uSDHC node for the boards that are based on S32G SoCs.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Chester Lin <chester62515@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Linux controls the clocks over SCMI on S32G SoCs. Therefore,
add the SCMI device tree node and the reserved region for SCMI
messages.
Signed-off-by: Catalin Udma <catalin-dan.udma@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Chester Lin <chester62515@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is stopping me building here for some reason,
/home/airlied/devel/kernel/dim/drm-fixes/drivers/gpu/drm/i915/i915_memcpy.c: In function ‘i915_unaligned_memcpy_from_wc’:
/home/airlied/devel/kernel/dim/drm-fixes/drivers/gpu/drm/i915/i915_memcpy.c:33:25: error: implicit declaration of function ‘BUG_ON’; did you mean ‘CI_BUG_ON’? [-Werror=implicit-function-declaration]
33 | #define CI_BUG_ON(expr) BUG_ON(expr)
| ^~~~~~
/home/airlied/devel/kernel/dim/drm-fixes/drivers/gpu/drm/i915/i915_memcpy.c:144:9: note: in expansion of macro ‘CI_BUG_ON’
144 | CI_BUG_ON(!i915_has_memcpy_from_wc());
| ^~~~~~~~~
engage maintainer overrides :-)
Signed-off-by: Dave Airlie <airlied@redhat.com>
The SVA code checks that the PASID is valid for the device when assigning
the PASID to the MM, but the normal PAGING related path does not check it.
Devices that don't support PASID or PASID values too large for the device
should not invoke the driver callback. The drivers should rely on the
core code for this enforcement.
Fixes: 1660370455 ("iommu: Add attach/detach_dev_pasid iommu interfaces")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-460705442b30+659-iommu_check_pasid_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Fix swabbing of the STE fields in the unlikely event of running on a
big-endian machine.
- Fix setting of STE.SHCFG on hardware that doesn't implement support
for attribute overrides.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmYEI7AQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNCJ1B/44AGPbxM0dgsq64soxtLcHMeG4p1Hr9jQn
xBkWCHu/F4smMGYZVNLV4buU9hYNnTmz6PjyJnRztjCrjs6RaChO8hTfo3PVdM52
bDSLHyP974j2mCwoFQctvN1G7+z4ps9IfXChciuQB4O22Pjtb35OHiIQengc3Sbg
mJn/W6v1OX+gp7xRzFcwsKfksEBdWbVjSvPoGoXx8QJBQSuAxzcLCw/8L4yg84Jb
CPn0FfhfEAg7S0203QR1p7CJ3LwXgVmGceAsALvrUv3s0oA7ApsM6a+SU6FoKEHL
5uSFRSdknSD/CcQ+3+BfUv4AcvHImsL1j9q2u45sil5rFCyneLIe
=CxUI
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
Arm SMMU fixes for 6.9
- Fix swabbing of the STE fields in the unlikely event of running on a
big-endian machine.
- Fix setting of STE.SHCFG on hardware that doesn't implement support
for attribute overrides.
- Fix wrong bound checks
- Fix use of msec rather than jiffies
- Remove dead code
-----BEGIN PGP SIGNATURE-----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=1jQx
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-03-26' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix build on mips
- Fix wrong bound checks
- Fix use of msec rather than jiffies
- Remove dead code
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a47jbz45nry4gjmtyresaraakwnasgngncltmrshbfkx25mhzu@bvay7j3ed7ir
- Add a new reviewer Sandeep Dhavale to build a healthier community;
- Drop experimental warning for FSDAX.
-----BEGIN PGP SIGNATURE-----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=+ZW9
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add a new reviewer Sandeep Dhavale to build a healthier community
- Drop experimental warning for FSDAX
* tag 'erofs-for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add myself as reviewer
erofs: drop experimental warning for FSDAX
Skip hook unregistration when adding or deleting devices from an
existing netdev basechain. Otherwise, commit/abort path try to
unregister hooks which not enabled.
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netdev basechain updates are stored in the transaction object hook list.
When setting on the table dormant flag, it iterates over the existing
hooks in the basechain. Thus, skipping the hooks that are being
added/deleted in this transaction, which leaves hook registration in
inconsistent state.
Reject table flag updates in combination with netdev basechain updates
in the same batch:
- Update table flags and add/delete basechain: Check from basechain update
path if there are pending flag updates for this table.
- add/delete basechain and update table flags: Iterate over the transaction
list to search for basechain updates from the table update path.
In both cases, the batch is rejected. Based on suggestion from Florian Westphal.
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Report EOPNOTSUPP if NFT_MSG_DESTROYCHAIN is used to delete hooks in an
existing netdev basechain, thus, only NFT_MSG_DELCHAIN is allowed.
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As mentioned in commit 397586506c ("modpost: Add '.ltext' and
'.ltext.*' to TEXT_SECTIONS"), modpost can result in a segmentation
fault due to a NULL pointer dereference in default_mismatch_handler().
find_tosym() can return the original symbol pointer instead of NULL
if a better one is not found.
This fixes the reported segmentation fault.
Fixes: a23e7584ec ("modpost: unify 'sym' and 'to' in default_mismatch_handler()")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 3a6dd5f614 ("riscv: remove unneeded #include
<asm-generic/export.h>") removed the last use of
include/asm-generic/export.h.
This deprecated header can go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The boolean 'choice' is used to list exclusively selected config
options.
You must not add a dependency between choice members, because such a
dependency would create an invisible entry.
In the following test case, it is impossible to choose 'C'.
[Test Case 1]
choice
prompt "Choose one, but how to choose C?"
config A
bool "A"
config B
bool "B"
config C
bool "C"
depends on A
endchoice
Hence, Kconfig shows the following error message:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol C
Kconfig:10: symbol C is part of choice A
Kconfig:4: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
However, Kconfig does not report anything for the following similar code:
[Test Case 2]
choice
prompt "Choose one, but how to choose B?"
config A
bool "A"
config B
bool "B"
depends on A
config C
bool "C"
endchoice
This is because menu_finalize() reparents the menu tree when an entry
depends on the preceding one.
With reparenting, the menu tree:
choice
|- A
|- B
\- C
... will be transformed into the following structure:
choice
|- A
| \- B
\- C
Consequently, Kconfig considers only 'A' and 'C' as choice members.
This behavior is awkward. The second test case should be an error too.
This commit stops reparenting inside a choice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit b4d3ddd2df ("scsi: libsas: Define NCQ Priority sysfs attributes
for SATA devices") introduced support for ATA NCQ priority control for ATA
devices managed by libsas. This commit introduces the ncq_prio_supported
and ncq_prio_enable sysfs device attributes to discover and control the use
of this features, similarly to libata. However, libata publicly declares
these device attributes and export them for use in ATA low level
drivers. This leads to a compilation error when libsas and libata are
built-in due to the double definition:
ld: drivers/ata/libata-sata.o:/home/Linux/scsi/drivers/ata/libata-sata.c:900:
multiple definition of `dev_attr_ncq_prio_supported';
drivers/scsi/libsas/sas_ata.o:/home/Linux/scsi/drivers/scsi/libsas/sas_ata.c:984:
first defined here
ld: drivers/ata/libata-sata.o:/home/Linux/scsi/drivers/ata/libata-sata.c:1026:
multiple definition of `dev_attr_ncq_prio_enable';
drivers/scsi/libsas/sas_ata.o:/home/Linux/scsi/drivers/scsi/libsas/sas_ata.c:1022:
first defined here
Resolve this problem by directly declaring the libsas attributes instead of
using the DEVICE_ATTR() macro. And for good measure, the device attribute
variables are also renamed.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: b4d3ddd2df ("scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240327020122.439424-1-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The extensible bitmap supports bit positions up to U32_MAX due to the
type of the member highbit being u32. Use u32 consistently as the type
for bit positions to announce to callers what range of values is
supported.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: merge fuzz, subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The number of buckets is calculated by performing a binary AND against
the mask of the hash table, which is one less than its size (which is a
power of two). This leads to all top bits being discarded, requiring
for short or similar inputs a hash function with a good avalanche
effect.
Use djb2a:
# current
common prefixes: 7 entries and 5/8 buckets used, longest chain
length 2, sum of chain length^2 11
classes: 134 entries and 100/256 buckets used, longest chain
length 5, sum of chain length^2 234
roles: 15 entries and 6/16 buckets used, longest chain length 5,
sum of chain length^2 57
types: 4448 entries and 3016/8192 buckets used, longest chain
length 41, sum of chain length^2 14922
users: 7 entries and 3/8 buckets used, longest chain length 3,
sum of chain length^2 17
bools: 306 entries and 221/512 buckets used, longest chain
length 4, sum of chain length^2 524
levels: 1 entries and 1/1 buckets used, longest chain length 1,
sum of chain length^2 1
categories: 1024 entries and 400/1024 buckets used, longest chain
length 4, sum of chain length^2 2740
# patch
common prefixes: 7 entries and 5/8 buckets used, longest chain
length 2, sum of chain length^2 11
classes: 134 entries and 101/256 buckets used, longest chain
length 3, sum of chain length^2 210
roles: 15 entries and 9/16 buckets used, longest chain length 3,
sum of chain length^2 31
types: 4448 entries and 3459/8192 buckets used, longest chain
length 5, sum of chain length^2 6778
users: 7 entries and 5/8 buckets used, longest chain length 3,
sum of chain length^2 13
bools: 306 entries and 236/512 buckets used, longest chain
length 5, sum of chain length^2 470
levels: 1 entries and 1/1 buckets used, longest chain length 1,
sum of chain length^2 1
categories: 1024 entries and 518/1024 buckets used, longest chain
length 7, sum of chain length^2 2992
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: line length fixes in the commit message]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Dump in the SELinux debug configuration the statistics for the
conditional rules avtab, the role transition, and class and common
permission hash tables.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmYEbzoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZsjZwgApoOcTn/mkX7DEViByMUpOrdNYqkJh+Tv
RkDDqhbA97i+zlxWp1dwtdfn0CYEcCW2XBucrfDNZMcR/cfXy2Wgdr6BD/FG9S2D
oQX6QQijO7g9uqNgDfIVAC0ftJEeWkM7YUhqNDVR751gjy2WOOJqPtSgNGd873By
P0rbHyfykHMzyYbwlzMLosO3RigefD1p1qkkODPf2OMo5A4tL1gL9AfEk3Kef9sf
9JHHWCLR378sm2sMpGw2Lxw4ypazl08ABu1yAWJk6Xipn80D/b08YUH/1yiKuq22
JrxhllJu2nqaHxXOzje2WEapTBz9tpTAwigOUQJiVZWm6ii19giGng==
=89Ft
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.9-rc2
The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree
for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes
for both to stack and iwlwifi. Our kunit tests were working only on um
architecture but that's fixed now.
* tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits)
MAINTAINERS: wifi: mwifiex: add Francesco as reviewer
kunit: fix wireless test dependencies
wifi: iwlwifi: mvm: include link ID when releasing frames
wifi: iwlwifi: mvm: handle debugfs names more carefully
wifi: iwlwifi: mvm: guard against invalid STA ID on removal
wifi: iwlwifi: read txq->read_ptr under lock
wifi: iwlwifi: fw: don't always use FW dump trig
wifi: iwlwifi: mvm: rfi: fix potential response leaks
wifi: mac80211: correctly set active links upon TTLM
wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW
wifi: iwlwifi: mvm: consider having one active link
wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF
wifi: mac80211: fix prep_connection error path
wifi: cfg80211: fix rdev_dump_mpp() arguments order
wifi: iwlwifi: mvm: disable MLO for the time being
wifi: cfg80211: add a flag to disable wireless extensions
wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc
wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
wifi: mac80211: fix mlme_link_id_dbg()
MAINTAINERS: wifi: add git tree for Realtek WiFi drivers
...
====================
Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the internal helper current_sid() where applicable.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
