Add the HID for the CS35L54 and CS35L57 Boosted Smart Amplifiers. These
have the same control interface as the CS35L56 so are handled by the
cs35l56-hda driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-3-rf@opensource.cirrus.com>
The CS35L54 and CS35L57 are Boosted Smart Amplifiers. The CS35L54 has
I2C/SPI control and I2S/TDM audio. The CS35L57 also has SoundWire
control and audio.
The hardware differences between L54, L56 and L57 do not affect the
driver control interface so they can all be handled by the same driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-2-rf@opensource.cirrus.com>
The kcalloc() in nouveau_dmem_evict_chunk() will return null if
the physical memory has run out. As a result, if we dereference
src_pfns, dst_pfns or dma_addrs, the null pointer dereference bugs
will happen.
Moreover, the GPU is going away. If the kcalloc() fails, we could not
evict all pages mapping a chunk. So this patch adds a __GFP_NOFAIL
flag in kcalloc().
Finally, as there is no need to have physically contiguous memory,
this patch switches kcalloc() to kvcalloc() in order to avoid
failing allocations.
CC: <stable@vger.kernel.org> # v6.1
Fixes: 249881232e ("nouveau/dmem: evict device private memory during release")
Suggested-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306050104.11259-1-duoming@zju.edu.cn
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a00aea8201ea85ae726411bb0fb015ea026ff40a.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 9f4f3dfad8 ("PCI: qcom: Enable ASPM for platforms supporting
1.9.0 ops") started enabling ASPM unconditionally when the hardware
claims to support it. This triggers Correctable Errors for some PCIe
devices on machines like the Lenovo ThinkPad X13s when L0s is enabled,
which could indicate an incomplete driver ASPM implementation or that
the hardware does in fact not support L0s.
This has now been confirmed by Qualcomm to be the case for sc8280xp and
its derivate platforms (e.g. sa8540p and sa8295p). Specifically, the PHY
configuration used on these platforms is not correctly tuned for L0s and
there is currently no updated configuration available.
Add a new flag to the driver configuration data and use it to disable
ASPM L0s on sc8280xp, sa8540p and sa8295p for now.
Note that only the 1.9.0 ops enable ASPM currently.
Link: https://lore.kernel.org/r/20240306095651.4551-4-johan+linaro@kernel.org
Fixes: 9f4f3dfad8 ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org # 6.7
Whether the 'msi-map-mask' property is needed or not depends on how the
MSI interrupts are mapped and it should therefore not be described as
required.
Note that the current schema fails to detect omissions of the mask
property if the internal MSI controller properties are also present.
Link: https://lore.kernel.org/r/20240306095651.4551-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Some Qualcomm SoCs require a minimum performance level for the power
domain so add 'required-opps' to the binding.
Link: https://lore.kernel.org/r/20240306095651.4551-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
According to Section 1.2 of Core Specification Supplement Part A the
complete or short name strings are defined as utf8s, which should not
include the trailing NULL for variable length array as defined in Core
Specification Vol1 Part E Section 2.9.3.
Removing the trailing NULL allows PTS to retrieve the random address based
on device name, e.g. for SM/PER/KDU/BV-02-C, SM/PER/KDU/BV-08-C or
GAP/BROB/BCST/BV-03-C.
Fixes: f61851f64b ("Bluetooth: Fix append max 11 bytes of name to scan rsp data")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:
[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110
And finally it causes WLAN interface bring up failure.
Change to give it one more chance here by polling CE rings,
before failing directly.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1
Fixes: 5e3dd157d7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
Currently the soc_dp_stats debugfs file has the following permissions:
# ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
-rw------- 1 root root 0 Mar 4 15:04 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
However this file does not actually support write operations -- no .write()
method is registered. Therefore use the correct permissions when creating
the file.
After the change:
# ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
-r-------- 1 root root 0 Mar 4 15:15 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240305-fix-soc_dp_stats-permission-v1-1-2ec10b42f755@quicinc.com
ath11k inherited struct wmi_start_scan_arg from ath10k. However, in
ath11k, this struct is unused -- struct scan_req_params is used for
this functionality. So remove the unused struct.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240226-ath11k-obsolete-wmi_start_scan_arg-v1-1-c0b94c6e191d@quicinc.com
ath12k inherited struct wmi_start_scan_arg from ath11k. However, in
ath12k, this struct is unused -- struct ath12k_wmi_scan_req_arg is
used for this functionality. So remove the unused struct.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240226-ath12k-obsolete-wmi_start_scan_arg-v1-1-07b0b563cb27@quicinc.com
We disallow DEFER_TASKRUN multishots from running by io-wq, which is
checked by individual opcodes in the issue path. We can consolidate all
it in io_wq_submit_work() at the same time moving the checks out of the
hot path.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e492f0f11588bb5aa11d7d24e6f53b7c7628afdb.1709905727.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When checking for concurrent CQE posting, we're not only interested in
requests running from the poll handler but also strayed requests ended
up in normal io-wq execution. We're disallowing multishots in general
from io-wq, not only when they came in a certain way.
Cc: stable@vger.kernel.org
Fixes: 17add5cea2 ("io_uring: force multishot CQEs into task context")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d8c5b36a39258036f93301cd60d3cd295e40653d.1709905727.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the fast inline path, we manually recycle the io_async_msghdr and
free the iovec, and then clear the REQ_F_NEED_CLEANUP flag to avoid
that needing doing in the slower path. We already do that in 2 spots, and
in preparation for adding more, add a helper and use it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just check for larger than zero rather than check for non-zero and
not -1. This is easier to read, and also protects against any errants
< 0 values that aren't -1.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only use the flag for this purpose, so rename it accordingly. This
further prevents various other use cases of it, keeping it clean and
consistent. Then we can also check it in one spot, when it's being
attempted recycled, and remove some dead code in io_kbuf_recycle_ring().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that prep handlers always initialize sr->done_io before any
potential failure conditions, and with that, we now it's always been
set even for the failure case.
With that, we don't need to use the REQ_F_PARTIAL_IO flag to gate on that.
Additionally, we should not overwrite req->cqe.res unless sr->done_io is
actually positive.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the length check for an icreq sqe fails we should not
continue processing but rather return immediately as all
other contents of that sqe cannot be relied on.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
User visible messages containing the word "timeout" can be alarming.
This one from nvme is just reporting a potentially informative device
configuration, and everything is working as designed. Change the text to
report the less concerning "D3 entry latency", which is where this value
comes from anyway.
Reported-by: Len Brown <lenb@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve this, there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/83deca1ce260f7e17ff3cb106c9a6946d4ca4505.1709886922.git.u.kleine-koenig@pengutronix.de
Add bindings for a generic 7-segment LED display using GPIOs.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a driver for a 7-segment LED display. At the moment only one
character is supported but it should be possible to expand this to
support more characters and/or 14-segment displays in the future.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
There are some bugfix for the HNS3 ethernet driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add checking for vf id of mailbox, in order to avoid array
out-of-bounds risk.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the mac port is fixed to configured as full dplex mode in
hclge_mac_init() when driver initialization or reset restore. Users may
change the mode to half duplex with ethtool, so it may cause the user
configuration dropped after reset.
To fix it, don't change the duplex mode when resetting.
Fixes: 2d03eacc0b ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cmdq reset command times out when all VFs are enabled and the queue is
full. The hardware processing time exceeds the timeout set by the driver.
In order to avoid the above extreme situations, the driver extends the
reset timeout to 1 second.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the tc is removed during reset, hns3 driver will return a errcode.
But kernel ignores this errcode, As a result,
the driver status is inconsistent with the kernel status.
This patch retains the deletion status when the deletion fails
and continues to delete after the reset to ensure that
the status of the driver is consistent with that of kernel.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the hilink version is H60, the serdes serial loopback test is not
supported. This patch add hilink version detection. When the version
is H60, the serdes serial loopback test will be disable.
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hisilicon device now supports a new 200G link interface,
which query from firmware in a new bit. Therefore,
the HCLGE_SUPPORT_200G_R4_BIT capability bit has been added.
The HCLGE_SUPPORT_200G_BIT has been renamed as
HCLGE_SUPPORT_200G_R4_EXT_BIT, and the firmware has
extended support for this mode.
Fixes: ae6f010cb1 ("net: hns3: add support for 200G device")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In hns3_dcbnl_ieee_delapp, should check ieee_delapp not ieee_setapp.
This path fix the wrong judgment.
Fixes: 0ba22bcb22 ("net: hns3: add support config dscp map to tc")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: putting ionic on a diet
Building on the performance work done in the previous patchset
[Link] https://lore.kernel.org/netdev/20240229193935.14197-1-shannon.nelson@amd.com/
this patchset puts the ionic driver on a diet, decreasing the memory
requirements per queue, and simplifies a few more bits of logic.
We trimmed the queue management structs and gained some ground, but
the most savings came from trimming the individual buffer descriptors.
The original design used a single generic buffer descriptor for Tx, Rx and
Adminq needs, but the Rx and Adminq descriptors really don't need all the
info that the Tx descriptors track. By splitting up the descriptor types
we can significantly reduce the descriptor sizes for Rx and Adminq use.
There is a small reduction in the queue management structs, saving about
3 cachelines per queuepair:
ionic_qcq:
Before: /* size: 2176, cachelines: 34, members: 23 */
After: /* size: 2048, cachelines: 32, members: 23 */
We also remove an array of completion descriptor pointers, or about
8 Kbytes per queue.
But the biggest savings came from splitting the desc_info struct into
queue specific structs and trimming out what was unnecessary.
Before:
ionic_desc_info:
/* size: 496, cachelines: 8, members: 10 */
After:
ionic_tx_desc_info:
/* size: 496, cachelines: 8, members: 6 */
ionic_rx_desc_info:
/* size: 224, cachelines: 4, members: 2 */
ionic_admin_desc_info:
/* size: 8, cachelines: 1, members: 1 */
In a 64 core host the ionic driver will default to 64 queuepairs of
1024 descriptors for Rx, 1024 for Tx, and 80 for Adminq and Notifyq.
The total memory usage for 64 queues:
Before:
65 * sizeof(ionic_qcq) 141,440
+ 64 * 1024 * sizeof(ionic_desc_info) 32,505,856
+ 64 * 1024 * sizeof(ionic_desc_info) 32,505,856
+ 64 * 1024 * 2 * sizeof(ionic_qc_info) 16,384
+ 1 * 80 * sizeof(ionic_desc_info) 39,690
----------
65,201,038
After:
65 * sizeof(ionic_qcq) 133,120
+ 64 * 1024 * sizeof(ionic_tx_desc_info) 32,505,856
+ 64 * 1024 * sizeof(ionic_rx_desc_info) 14,680,064
+ (removed) 0
+ 1 * 80 * sizeof(ionic_admin desc_info) 640
----------
47,319,680
This saves us approximately 18 Mbytes per port in a 64 core machine,
a 28% savings in our memory needs.
In addition, this improves our simple single thread / single queue
iperf case on a 9100 MTU connection from 86.7 to 95 Gbits/sec.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When possible, keep the stats struct references strictly
in the error handling blocks and out of the fastpath.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up a couple of small dma_addr handling issues
- don't double-count dma-map-err stat in ionic_tx_map_skb()
or ionic_xdp_post_frame()
- return 0 on error from both ionic_tx_map_single() and
ionic_tx_map_frag() and check for !dma_addr in ionic_tx_map_skb()
and ionic_xdp_post_frame()
- be sure to unmap buf_info[0] in ionic_tx_map_skb() error path
- don't assign rx buf->dma_addr until error checked in ionic_rx_page_alloc()
- remove unnecessary dma_addr_t casts
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We call ionic_rx_page_alloc() only on existing buf_info structs from
ionic_rx_fill(). There's no need for the additional NULL test.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rearange a few fields for better cache use and to put the
flags field up into the first cacheline rather than the last.
struct ionic_qcq
Before: /* size: 2176, cachelines: 34, members: 23 */
After: /* size: 2112, cachelines: 33, members: 23 */
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the idev field from ionic_queue, which saves us a
bit of space, and add it into ionic_cq where there's room
within some cacheline padding. Use this pointer rather
than doing a multi level reference from lif->ionic.
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing ionic_rx_frags() code is a bit of a mess and can
be cleaned up by unrolling the first frag/header setup from
the loop, then reworking the do-while-loop into a for-loop. We
rename the function to a more descriptive ionic_rx_build_skb().
We also change a couple of related variable names for readability.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the AdminQ clean is a simple action called from only
one place, fold it back into the service routine.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make desc_info structure specific to the queue type, which
allows us to cut down the Rx and AdminQ descriptor sizes by
not including all the fields needed for the Tx desriptors.
Before:
struct ionic_desc_info {
/* size: 464, cachelines: 8, members: 6 */
After:
struct ionic_tx_desc_info {
/* size: 464, cachelines: 8, members: 6 */
struct ionic_rx_desc_info {
/* size: 224, cachelines: 4, members: 2 */
struct ionic_admin_desc_info {
/* size: 8, cachelines: 1, members: 1 */
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With a little simple math we don't need another struct array to
find the completion structs, so we can remove the ionic_cq_info
altogether. This doesn't really save anything in the ionic_cq
since it gets padded out to the cacheline, but it does remove
the parallel array allocation of 8 * num_descriptors, or about
8 Kbytes per queue in a default configuration.
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By reworking the queue service routines to have their own
servicing loops we can remove the cb pointer from desc_info
to save another 8 bytes per descriptor,
This simplifies some of the queue handling indirection and makes
the code a little easier to follow, and keeps service code in
one place rather than jumping between code files.
struct ionic_desc_info
Before: /* size: 472, cachelines: 8, members: 7 */
After: /* size: 464, cachelines: 8, members: 6 */
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
