Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240208105301.129005-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
In contrast to other devices using Allwinner SoCs, the Transpeed 8K618-T
TV box uses a mainline supported WiFi chip: it's Broadcom 4335 compatible,
packaged by Murata.
Add the required DT nodes to let DT users know about the SDIO device.
There is an otherwise empty MMC device node, to receive the MAC address,
that firmware might want to write in there.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240209115759.3582869-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
On some boards the designers saved on a 32KHz crystal for some external
chips, so the SoC has to help out, with providing a 32 KHz clock signal.
Add a pinctrl group node to allow DT nodes to reference this fanout signal.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240209115759.3582869-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Remix Mini PC is a "mini computer" using the Allwinner H64 SoC,
which appears to be just a relabelled A64. It was launched in 2015 by
the now defunct company Jide, and shipped with a desktop optimised
version of Android. It features
- Allwinner H64 Soc (4 * Arm Cortex-A53 cores)
- 1 or 2 GB DRAM
- 8 or 16 GB eMMC flash
- 100 MBit Ethernet port (using an X-Powers AC200 PHY)
- RTL8723BS WiFi & Bluetooth chip
- HDMI port
- two USB 2.0 ports
- 3.5mm AV port
- microSD card slot
The devicetree covers most peripherals, though there is no agreed
binding for the PHY chip yet, so this is left out.
The eMMC did not work with the MMC DDR speed mode, so this mode property
is omitted.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240209114018.3580370-4-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Jide Remix Mini PC is a mini computer that ships with the Remix OS
Android based system. The SoC is an Allwinner H64, which is very close,
if not identical to the Allwinner A64.
Add the board/SoC compatible string pair to the list of known boards.
There are some drivers that look explicitly for the A64 compatible name,
so retain this name to increase compatibility.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240209114018.3580370-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Jide tech once create the Remix OS Android system, and shipped it on
some custom hardware. Add their name to the bindings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240209114018.3580370-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The H616 SoC has an SPDIF transmitter hardware block, which has the same
layout as the one in the H6, minus the receiver side.
Add a device node for it, and a default pinmux.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240127163247.384439-8-wens@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The DMA controllers found on the H616 and H618 are the same as the one
found on the A100. The only difference is the DMA endpoint (DRQ) layout.
Add a device node for it, and add DMA channels for existing peripherals.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240127163247.384439-7-wens@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The SPDIF hardware found on the H6 supports both transmit and receive
functions. However it is missing the RX DMA channel.
Add the SPDIF hardware block's RX DMA channel. Also remove the
by-default pinmux, since the end device can choose to implement
either or both functionalities.
Fixes: f95b598df4 ("arm64: dts: allwinner: Add SPDIF node for Allwinner H6")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240127163247.384439-6-wens@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Regular expression used to match the unit address part should not allow
non-hex numbers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240123083450.20996-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Orange Pi Zero 2W dts file is not included in Makefile. Fix this.
Fixes: c505ee1eae ("arm64: dts: allwinner: h616: add Orange Pi Zero 2W support")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240222211326.114955-1-jernej.skrabec@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."
Link: https://lore.kernel.org/r/20240218151353.3612621-3-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."
Link: https://lore.kernel.org/r/20240218151353.3612621-2-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add flexcom 10 node for usage on the SAMA7G54 Curiosity board.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20240215091524.14732-3-mihai.sain@microchip.com
[claudiu.beznea: align dmas to the opening '<']
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The xe_gt_tlb_invalidation layer implements TLB invalidations for a GuC
backend. Simply return if in execlists mode. A follow up may properly
implement the xe_gt_tlb_invalidation layer for both GuC and execlists.
Fixes: a9351846d9 ("drm/xe: Break of TLB invalidation into its own file")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232021.3911545-4-matthew.brost@intel.com
Currently, the V3D driver uses PAGE_SHIFT over the assumption that
PAGE_SHIFT = 12, as the PAGE_SIZE = 4KB. But, the RPi 5 is using
PAGE_SIZE = 16KB, so the MMU PAGE_SHIFT is different than the system's
PAGE_SHIFT.
Enable V3D to be used in system's with any PAGE_SIZE by making sure that
everything MMU-related uses the MMU page shift.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214193503.164462-1-mcanal@igalia.com
- Fix CPU hotplug
- Fix unaligned accesses and faults in stack unwinder
- Fix potential build errors by always including asm-generic/kprobes.h
- Fix build bug by add missing CONFIG_DYNAMIC_FTRACE check
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZdjO+gAKCRD3ErUQojoP
X5QiAPsGd0pv/I5HXc/JkwnqBaP7RC1BwN01og4ftzmKG8ngvQD+JH4YT2rvT7c0
0FgUVp5khg0ZgSZ6IGUFy7GUs8uanww=
=XdOQ
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Fixes CPU hotplug, the parisc stack unwinder and two possible build
errors in kprobes and ftrace area:
- Fix CPU hotplug
- Fix unaligned accesses and faults in stack unwinder
- Fix potential build errors by always including asm-generic/kprobes.h
- Fix build bug by add missing CONFIG_DYNAMIC_FTRACE check"
* tag 'parisc-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix stack unwinder
parisc/kprobes: always include asm-generic/kprobes.h
parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check
Revert "parisc: Only list existing CPUs in cpu_possible_mask"
The Rockchip and IMX8 platforms get a number of fixes for dts files in
order to address some misconfigurations, including a regression for
USB-C support on some boards.
The other dts fixes are part of a series by Rob Herring to clean up
another class of dtc compiler warnings across all platforms, with
a few others helping out as well. With this, we can enable the warning
for the coming merge window without introducing regressions.
Conor Dooley has collected fixes for RISC-V platforms, both for the
dts files and for platofrm specific drivers.
The ep93xx platform gets a regression for for its gpio descriptors.
-----BEGIN PGP SIGNATURE-----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=iNfa
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm and RISC-V SoC fixes from Arnd Bergmann:
"The Rockchip and IMX8 platforms get a number of fixes for dts files in
order to address some misconfigurations, including a regression for
USB-C support on some boards.
The other dts fixes are part of a series by Rob Herring to clean up
another class of dtc compiler warnings across all platforms, with a
few others helping out as well. With this, we can enable the warning
for the coming merge window without introducing regressions.
Conor Dooley has collected fixes for RISC-V platforms, both for the
dts files and for platofrm specific drivers.
The ep93xx platform gets a regression for for its gpio descriptors"
* tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
arm64: dts: qcom: Fix interrupt-map cell sizes
arm: dts: Fix dtc interrupt_map warnings
arm64: dts: Fix dtc interrupt_provider warnings
arm: dts: Fix dtc interrupt_provider warnings
arm64: dts: freescale: Disable interrupt_map check
ARM: ep93xx: Add terminator to gpiod_lookup_table
riscv: dts: sifive: add missing #interrupt-cells to pmic
arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
arm64: dts: rockchip: set num-cs property for spi on px30
arm64: dts: rockchip: minor rk3588 whitespace cleanup
riscv: dts: starfive: replace underscores in node names
bus: imx-weim: fix valid range check
Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
arm64: dts: tqma8mpql: fix audio codec iov-supply
arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
...
- Revert fix to jump label asm constraints, as it regresses the build
with some GCC 5.5 toolchains.
- Restore SME control registers when resuming from suspend
- Fix incorrect filter definition in CXL PMU driver
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmXXVFoQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPQpB/9+TGwvTPj3xEJcrJwTnsoY2tMtJdYO/sli
f31auT0PsOI1RtMin1fyiN9fOpIbjWHcdlBgUxnkyV6c2MpViw8L/0H27guJGWgv
+G26+H/Ch1BsujewKkfJxX5GimdGZ2uBvbiYyBb4EXg36/UG6qeRjfYP+EB70UPY
rrT01E8UGv6WDShY9om7QVO91X7YU6EBUfu46wPrs2LFbueaBwCEBZBLE5qu4vWF
N7yWOWR2CUt/P4v8a5LfV3wwM+VRdmvovHnPUH5uR7QthEa+gDCDPsjf3fus4nts
iE6NCC517j9cG8lz7B5FJP6UfMPWgbNr1QMFuoyrzwdvc6EoXG6z
=+SsP
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A simple fix to a definition in the CXL PMU driver, a couple of
patches to restore SME control registers on the resume path (since
Arm's fast model now clears them) and a revert for our jump label asm
constraints after Geert noticed they broke the build with GCC 5.5.
There was then the ensuing discussion about raising the minimum GCC
(and corresponding binutils) versions at [1], but for now we'll keep
things working as they were until that goes ahead.
- Revert fix to jump label asm constraints, as it regresses the build
with some GCC 5.5 toolchains.
- Restore SME control registers when resuming from suspend
- Fix incorrect filter definition in CXL PMU driver"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend
arm64/sme: Restore SME registers on exit from suspend
Revert "arm64: jump_label: use constraints "Si" instead of "i""
perf: CXL: fix CPMU filter value mask length
Retry page faults without acquiring mmu_lock, and without even faulting
the page into the primary MMU, if the resolved gfn is covered by an active
invalidation. Contending for mmu_lock is especially problematic on
preemptible kernels as the mmu_notifier invalidation task will yield
mmu_lock (see rwlock_needbreak()), delay the in-progress invalidation, and
ultimately increase the latency of resolving the page fault. And in the
worst case scenario, yielding will be accompanied by a remote TLB flush,
e.g. if the invalidation covers a large range of memory and vCPUs are
accessing addresses that were already zapped.
Faulting the page into the primary MMU is similarly problematic, as doing
so may acquire locks that need to be taken for the invalidation to
complete (the primary MMU has finer grained locks than KVM's MMU), and/or
may cause unnecessary churn (getting/putting pages, marking them accessed,
etc).
Alternatively, the yielding issue could be mitigated by teaching KVM's MMU
iterators to perform more work before yielding, but that wouldn't solve
the lock contention and would negatively affect scenarios where a vCPU is
trying to fault in an address that is NOT covered by the in-progress
invalidation.
Add a dedicated lockess version of the range-based retry check to avoid
false positives on the sanity check on start+end WARN, and so that it's
super obvious that checking for a racing invalidation without holding
mmu_lock is unsafe (though obviously useful).
Wrap mmu_invalidate_in_progress in READ_ONCE() to ensure that pre-checking
invalidation in a loop won't put KVM into an infinite loop, e.g. due to
caching the in-progress flag and never seeing it go to '0'.
Force a load of mmu_invalidate_seq as well, even though it isn't strictly
necessary to avoid an infinite loop, as doing so improves the probability
that KVM will detect an invalidation that already completed before
acquiring mmu_lock and bailing anyways.
Do the pre-check even for non-preemptible kernels, as waiting to detect
the invalidation until mmu_lock is held guarantees the vCPU will observe
the worst case latency in terms of handling the fault, and can generate
even more mmu_lock contention. E.g. the vCPU will acquire mmu_lock,
detect retry, drop mmu_lock, re-enter the guest, retake the fault, and
eventually re-acquire mmu_lock. This behavior is also why there are no
new starvation issues due to losing the fairness guarantees provided by
rwlocks: if the vCPU needs to retry, it _must_ drop mmu_lock, i.e. waiting
on mmu_lock doesn't guarantee forward progress in the face of _another_
mmu_notifier invalidation event.
Note, adding READ_ONCE() isn't entirely free, e.g. on x86, the READ_ONCE()
may generate a load into a register instead of doing a direct comparison
(MOV+TEST+Jcc instead of CMP+Jcc), but practically speaking the added cost
is a few bytes of code and maaaaybe a cycle or three.
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/ZNnPF4W26ZbAyGto@yzhao56-desk.sh.intel.com
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Yuan Yao <yuan.yao@linux.intel.com>
Cc: Xu Yilun <yilun.xu@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240222012640.2820927-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
device initialization
- Add missing multiplication by 8 in __iowrite64_copy() to get the
correct byte length before calling zpci_memcpy_toio()
- Various config updates
-----BEGIN PGP SIGNATURE-----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=RG5H
-----END PGP SIGNATURE-----
Merge tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
device initialization
- Add missing multiplication by 8 in __iowrite64_copy() to get the
correct byte length before calling zpci_memcpy_toio()
- Various config updates
* tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: fix invalid -EBUSY on ccw_device_start
s390: use the correct count for __iowrite64_copy()
s390/configs: update default configurations
s390/configs: enable INIT_STACK_ALL_ZERO in all configurations
s390/configs: provide compat topic configuration target
or aren't considered appropriate for backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZdfSoQAKCRDdBJ7gKXxA
jtdcAQCEMwrTnSVOfP0WxixL11HK8a1bJdezHBLWFUDscm4BXgD9EV4mgQ2yPDA6
ka+Lf9MucZSpJ2QYZA4GoDqP4wefawA=
=zI6b
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"A batch of MM (and one non-MM) hotfixes.
Ten are cc:stable and the remainder address post-6.7 issues or aren't
considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
mm/damon/lru_sort: fix quota status loss due to online tunings
mm/damon/reclaim: fix quota stauts loss due to online tunings
MAINTAINERS: mailmap: update Shakeel's email address
mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
mm: memcontrol: clarify swapaccount=0 deprecation warning
mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
mm/zswap: invalidate duplicate entry when !zswap_enabled
lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
mm/swap: fix race when skipping swapcache
mm/swap_state: update zswap LRU's protection range with the folio locked
selftests/mm: uffd-unit-test check if huge page size is 0
mm/damon/core: check apply interval in damon_do_apply_schemes()
mm: zswap: fix missing folio cleanup in writeback race path
Document device tree binding of the Microchip SAMA7G54 Curiosity board.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215091524.14732-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The only difference made by CONFIG_THERMAL_WRITABLE_TRIPS is whether or
not the writable trips mask passed during thermal zone registration
will take any effect, but whoever passes a non-zero writable trips mask
to thermal_zone_device_register_with_trips() can be forgiven thinking
that it will always work.
Moreover, some thermal drivers expect user space to set trip temperature
values, so they select CONFIG_THERMAL_WRITABLE_TRIPS, possibly overriding
a manual choice to unset it and going against the design purportedly
allowing system integrators to decide on the writability of trip points
for the given kernel build. It is also set in one platform's defconfig.
Forthermore, CONFIG_THERMAL_WRITABLE_TRIPS only affects trip temperature,
because trip hysteresis is writable as long as the thermal zone provides
a callback to update it, regardless of the CONFIG_THERMAL_WRITABLE_TRIPS
value.
The above means that the symbol in question is used inconsistently and
its purpose is at least moot, so remove it and always take the writable
trip mask passed to thermal_zone_device_register_with_trips() into
account.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because thermal zone operations are now stored directly in struct
thermal_zone_device, thermal zone creators can discard the operations
structure after the zone registration is complete, or it can be made
read-only.
Accordingly, make int340x_thermal_zone_add() use a local variable to
represent thermal zone operations, so it is freed automatically upon the
function exit, and make the other Intel thermal drivers use const zone
operations structures.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because thermal zone operations are now stored directly in struct
thermal_zone_device, acpi_thermal_zone_ops need not be modified by
the thermal core and so it can be const.
Adjust the code accordingly.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The current code requires thermal zone creators to pass pointers to
writable ops structures to thermal_zone_device_register_with_trips()
which needs to modify the target struct thermal_zone_device_ops object
if the "critical" operation in it is NULL.
Moreover, the callers of thermal_zone_device_register_with_trips() are
required to hold on to the struct thermal_zone_device_ops object passed
to it until the given thermal zone is unregistered.
Both of these requirements are quite inconvenient, so modify struct
thermal_zone_device to contain struct thermal_zone_device_ops as field and
make thermal_zone_device_register_with_trips() copy the contents of the
struct thermal_zone_device_ops passed to it via a pointer (which can be
const now) to that field.
Also adjust the code using thermal zone ops accordingly and modify
thermal_of_zone_register() to use a local ops variable during
thermal zone registration so ops do not need to be freed in
thermal_of_zone_unregister() any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because the thermal core creates and uses its own copy of the trips
table passed to thermal_zone_device_register_with_trips(), it is not
necessary to hold on to a local copy of it any more after the given
thermal zone has been registered.
Accordingly, modify Intel thermal drivers to discard the trips tables
passed to thermal_zone_device_register_with_trips() after thermal zone
registration, for example by storing them in local variables which are
automatically discarded when the zone registration is complete.
Also make some additional code simplifications unlocked by the above
changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Because the thermal core creates and uses its own copy of the trips
table passed to thermal_zone_device_register_with_trips(), it is not
necessary to hold on to a local copy of it any more after the given
thermal zone has been registered.
Accordingly, modify the ACPI thermal driver to store the trips table
passed to thermal_zone_device_register_with_trips() in a local variable
which is automatically discarded when acpi_thermal_add() returns to
its caller.
Also make some additional code simplifications unlocked by the above
change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The current code expects thermal zone creators to pass a pointer to a
writable trips table to thermal_zone_device_register_with_trips() and
that trips table is then used by the thermal core going forward.
Consequently, the callers of thermal_zone_device_register_with_trips()
are required to hold on to the trips table passed to it until the given
thermal zone is unregistered, at which point the trips table can be
freed, but at the same time they are not expected to access that table
directly. This is both error prone and confusing.
To address it, turn the trips table pointer in struct thermal_zone_device
into a flex array (counted by its num_trips field), allocate it during
thermal zone device allocation and copy the contents of the trips table
supplied by the zone creator (which can be const now) into it, which
will allow the callers of thermal_zone_device_register_with_trips() to
drop their trip tables right after the zone registration.
This requires the imx thermal driver to be adjusted to store the new
temperature in its internal trips table in imx_set_trip_temp(), because
it will be separate from the core's trips table now and it has to be
explicitly kept in sync with the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
address systemic failure that can occur if user provided pages map
to the same block.
- Fix DM crypt to not allow modifying data that being encrypted for
authenticated encryption.
- Fix DM crypt and verity targets to align their respective bvec_iter
struct members to avoid the need for byte level access (due to
__packed attribute) that is costly on some arches (like RISC).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmXY0iwACgkQxSPxCi2d
A1oG3Qf/WE0T5qyBnDZ7irhvJmSLVx4oAwzB0PmMtELZ3Tkyn7BBAxq1Q2I2UT3x
r90d1uy/pz6Y+kZkAPZjYuYLctukEa1swpfFe0Sn01dBrbgGU/p2vi3fkF+ZK6/t
n5EN8S5dkf6rIDmp8R56iP8mP4OEultYjLugxc6ROohFgHZicoqv+Pye9kHp0Y19
HSW2eueag/s2nMa9HKjIEd3+NBgmGb0qMMf3M6CXpRLNi/f/cyHbPzq83+eW3gcg
jl480w5YHk2nOUSqrO8UfIaP4BpD3SEXQxVqIzdkVX4cEBO4yRcBNrQpsT89GsXj
sg5zinkq3g7SThEpQWdpkeZMR/6q/A==
=n0nQ
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Stable fixes for 3 DM targets (integrity, verity and crypt) to
address systemic failure that can occur if user provided pages map to
the same block.
- Fix DM crypt to not allow modifying data that being encrypted for
authenticated encryption.
- Fix DM crypt and verity targets to align their respective bvec_iter
struct members to avoid the need for byte level access (due to
__packed attribute) that is costly on some arches (like RISC).
* tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt, dm-integrity, dm-verity: bump target version
dm-verity, dm-crypt: align "struct bvec_iter" correctly
dm-crypt: recheck the integrity tag after a failure
dm-crypt: don't modify the data when using authenticated encryption
dm-verity: recheck the hash after a failure
dm-integrity: recheck the integrity tag after a failure
Merge thermal core changes for 6.9:
- Minor fixes for thermal governors (Rafael J. Wysocki, Di Shen).
- Trip point handling fixes for the iwlwifi wireless driver (Rafael J.
Wysocki).
- Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno).
* thermal-tmp:
thermal: gov_power_allocator: Avoid overwriting PID coefficients from setup time
thermal: sysfs: Fix up white space in trip_point_temp_store()
iwlwifi: mvm: Use for_each_thermal_trip() for walking trip points
iwlwifi: mvm: Populate trip table before registering thermal zone
iwlwifi: mvm: Drop unused fw_trips_index[] from iwl_mvm_thermal_device
thermal: core: Change governor name to const char pointer
thermal: gov_bang_bang: Fix possible cooling device state ping-pong
thermal: gov_fair_share: Fix dependency on trip points ordering
If there are factory calibration settings in EFI, extract the
settings and write them to the firmware calibration controls.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If there are factory calibration settings in EFI, extract the
settings and write them to the firmware calibration controls.
This must be done after any firmware or coefficients have been
downloaded to the amp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds some helper functions and data for applying amp calibration.
1. cs35l56_read_silicon_uid() to get the silicon ID that is used to
search for the correct calibration data entry.
2. Add the registers for the silicon ID to the readable registers.
3. cs35l56_get_calibration() wrapper around
cs_amp_get_efi_calibration_data()
4. cs35l56_calibration_controls() table of the firmware controls
for calibration data.
5. Added members to struct cs35l56_base to store the calibration
data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a new library for code that is used by multiple Cirrus Logic
amps. This initially implements extracting amp calibration data
from EFI and writing it to firmware controls.
During factory calibration of built-in speakers the firmware
calibration constants are stored in an EFI file. The file contains
an array of calibration constants for each of the speakers.
cs_amp_get_calibration_data() searches for an entry matching the
requested UID stamp, otherwise by array index. If the data is found in
EFI the constants for that speaker are copied back to the caller.
If EFI is not enabled, the cs_amp_get_calibration_data() implementation
will compile to simply return -ENOENT and the linker can drop the code.
The code to write calibration controls uses cs_dsp. Building of cs_dsp
is not forced. Instead, the code will compile away the calls to
cs_dsp if cs_dsp is not reachable.
This strategy of conditional code allows cs-amp-lib to be shared by
multiple drivers without forcing inclusion of other modules that might
be unnecessary.
The calls to efi.get_variable() and cs_dsp are in small wrapper
functions. This is so that a KUNIT_STATIC_STUB_REDIRECT can be added in
a future patch to redirect these calls to replacement functions for
KUnit testing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the functionality of wm_adsp_event() into two exported
functions wm_adsp_start() and wm_adsp_stop().
This allows the codec driver to start and stop the DSP outside of a
DAPM widget.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240223153910.2063698-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jetson Orin NX and Jetson Orin Nano DTSI files just define the HDA label
and it is already added as part of base DTS files.
Hence, removing these files.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add audio support for the NVIDIA Jetson Orin NX (p3767, SKU0) module and
Jetson Orin Nano (p3767, SKU5) module Developer Kit with P3768 carrier
board.
APE and HDA sound cards are enabled.
Supported IO interfaces: I2S2 and I2S4.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
I2S3, I2S5, DMIC1, DMIC2, DMIC4, DSPK1 and DSPK2 IO ports are not
defined. Those are not defined earlier because it was inside platform
DT and defined only for supported IOs by the platform.
Now these are part of SoC DTSI, all IOs ports are defined
so that all the ports are available to be used by platforms.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
AHUB and its child nodes ports are part of platform DTS and with new
platform support these entries need to be defined again.
As they are common across the platforms, moving them to SoC
DTSI to avoid code duplicacy.
AHUB HW accelerators are used for audio processing and typically all of
these are made available. Platforms can enable all of these just by
enabling the AHUB parent device. However IO interfaces (which are also
children of AHUB) are selectively enabled based on what the platform
actually exposes for interaction with external world.
Signed-off-by: sheetal <sheetal@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the Cypress USB Type-C controller for Tegra194 Jetson AGX
Xavier board.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the USB device support for the Jetson AGX Xavier platform.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the INA3221 current monitors that are present on the Jetson AGX
Xavier and Jetson Xavier NX boards.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>