The powerup delay was not observed during probe, leading to occasional
I2C communication failures in RPM suspend callback. Power delay is
properly observed in resume callback already.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The SYSTEM_CTRL0 register in ov5645 is almost similar to ov5640. But the
hard reset control is mandatory for the ov5645 device, so there is no
need for soft reset in the driver.
Add a 1msec delay for the software power up (OV5645_SYSTEM_CTRL0_START)
register in ov5645_global_init_setting. Without this delay sometimes the
image is not captured at all when the i2c frequency is 400kHz.
The changes are fixing both the greenish issue and image capture at 400kHz
i2c frequency on Renesas RZ/G2L SMARC EVK platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
req_fr check in alvium_s_frame_interval() is incorrect. In particular
req_fr can't be >=max and <= min at the same time. Ensure the requested
frame rate remains within the supported range between min_fr and max_fr by
clamping it.
Also remove the unused dft_fr argument of alvium_get_frame_interval().
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the newly added storage for frame interval in the subdev state to
simplify the driver.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Inline alvium_set_frame_interval() into alvium_s_frame_interval().
The alvium_set_frame_interval() is called once only, by
alvium_s_frame_interval(). The latter is a thin wrapper around the
former. Inline the function in its caller to make the code more
readable.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The fr (frame rate) field of the alvium_dev structure is
only used to pass result from alvium_set_frame_interval() to
alvium_set_frame_rate() that writes this info into the hw reg.
Replace it with a function parameter.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The dft_fr, min_fr and max_fr fields of the alvium_dev structure are
only used to pass results from alvium_get_frame_interval() to its
caller. Replace them with function parameters.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Those cases missed in previous uAPI cleanups were mostly accidentally
brought in from i915 or created to exercise the possibilities of gpuvm
but they are not used by userspace yet, so let's remove them. They can
still be brought back later if needed.
v2:
- Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty)
- Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza)
- Ensure invalid flag values are rejected (Rodrigo Vivi)
v3: Rebase after removal of persistent exec_queues (Francois Dugast)
v4: Rodrigo: Rebase after the new dumpable flag.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232356.175431-1-rodrigo.vivi@intel.com
If an integer's type has x bits, shifting the integer left by x or more
is undefined behavior.
This can happen in the rotate function when attempting to do a rotation
of the whole value by 0.
Fixes: 0dd714bfd2 ("KVM: s390: selftest: memop: Add cmpxchg tests")
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Link: https://lore.kernel.org/r/20240111094805.363047-1-nsg@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20240111094805.363047-1-nsg@linux.ibm.com>
Two fixes for W=2 issues in devicetrees, which should constitute fixes
for all reasonable-to-fix W=2 problems on RISC-V. The others are caused
by standard USB and MMC property names containing underscores that are
not likely to ever change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZdYqJwAKCRB4tDGHoIJi
0tuZAQCozsk1bZtlW00MzSLcM/dGBaxkfxoYFmjsVgk6z/QyzQEAyPcLrkhvifIt
N9Cb6fG9/gJGZqaaTa+kA70rh8JjQAo=
=iaoh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CyGI
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.8-rc6
Two fixes for W=2 issues in devicetrees, which should constitute fixes
for all reasonable-to-fix W=2 problems on RISC-V. The others are caused
by standard USB and MMC property names containing underscores that are
not likely to ever change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: sifive: add missing #interrupt-cells to pmic
riscv: dts: starfive: replace underscores in node names
Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A fix for a kconfig symbol whose help text has been unhelpful since its
introduction.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZdYoDAAKCRB4tDGHoIJi
0sUcAPwLS5QvKXEleGgXZDN+c1s69PB6cozGLzBhaAuq2ro1EQEAqSLINUafm7dV
vViH9CYjVivLTYzdwNLfVBvlTO+ZuQk=
=Z6rj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Xybl
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-drivers-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.8-rc6
A fix for a kconfig symbol whose help text has been unhelpful since its
introduction.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt
Link: https://lore.kernel.org/r/20240221-irate-outrage-cf7f96f83074@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A single fix for an inconsistency reported during CIP review by Pavel in
the newly added ax45mp cache driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZdYj6wAKCRB4tDGHoIJi
0jgzAQCvylOK4bXEe1CoizoNRRLNKYhwpVYY4gaR8pKbX5F8EwD/T0pCxSVO0T4y
NFsNqKy881LJAYjp1vKeycq9mc4Hvgg=
=F0Vg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mHdk
-----END PGP SIGNATURE-----
Merge tag 'riscv-cache-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Cache driver fixes for v6.8-rc6
A single fix for an inconsistency reported during CIP review by Pavel in
the newly added ax45mp cache driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-cache-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
Link: https://lore.kernel.org/r/20240221-keenness-handheld-b930aaa77708@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add match data to the rkisp1 driver to match the i.MX8MP ISP.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The i.MX8MP has extra register fields in the memory interface control
register for setting the output format, which work with the output
alignment format register for byte-swapping and LSB/MSB alignment.
With processed and 8-bit raw streams, it doesn't cause any problems to
not set these, but with raw streams of higher bit depth the endianness
is swapped and the data is not aligned properly.
Add support for setting these registers and plumb them in to fix this.
While at it, reflow a comment related to the forced configuration
update.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Add support for UYVY as an output format. The uv_swap bit in the
MI_XTD_FORMAT_CTRL register that is used for the NV formats does not
work for packed YUV formats. Thus, UYVY support is implemented via
byte-swapping. This method clearly does not work for implementing
support for YVYU and VYUY.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
The ISP version in the i.MX8MP has an MI_OUTPUT_ALIGN_FORMAT register
that the rk3399 does not have. This register allows swapping bytes,
which can be used to implement UYVY from YUYV.
Add a flag to the format info in the list of formats supported by the
capture v4l2 devices, and update enum_fmt and s_fmt to take it into
account.
To signify the presence of this feature, reuse the MAIN_STRIDE feature
flag, as it is very likely that any ISP version that supports one of
these two features will also support the other.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
On the ISP that is integrated in the i.MX8MP, DMA addresses have been
extended to 34 bits, with the 32 MSBs stored in the DMA address
registers and the 2 LSBs set to 0.
To support this:
- Shift the addresses to the right by 2 when writing to registers
- Set the dma mask to 34 bits
- Use dma_addr_t instead of u32 when storing the addresses
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The i.MX8MP has a gasket between the CSI-2 receiver and the ISP.
Configure and enable it when starting the ISP, and disable it when
stopping.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The NXP i.MX8MP integrates an ISP8000Nano from VeriSilicon, which is a
derivative of the ISP found in earlier Rockchip SoCs. It isn't clear at
which exact point the two product lines have diverged, and there is no
public information regarding the version numbering scheme of the
ISP8000Nano. Nonetheless, this ISP is close enough to the V10 found in
the RK3399 to be supported by the same driver.
Add an entry for the ISP found in the NXP i.MX8MP to the version enum.
Given the lack of information on the version numbering scheme, and on
whether or not the version in the i.MX8MP is identical to other
ISP8000Nano versions or has been customized for the i.MX8MP, depart from
the number-based versions and name this new version V_IMX8MP.
Update comments for the other versions and for relevant parameters
blocks to clearly indicate the size of grids and histogram for the
different versions.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
The i.MX8MP ISP is compatbile with the rkisp1 driver. Add it to the list
of compatible strings. While at it, expand on the description of the
clocks to make it clear which clock in the i.MX8MP ISP they map to,
based on the names from the datasheet.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Some versions of the ISP supported by the rkisp1 driver, such as the ISP
in the i.MX8MP, lack the dual crop registers and don't support cropping
at the resizer input. They instead rely on cropping in the Image
Stabilization module, at the output of the ISP, to modify the resizer
input size and implement digital zoom.
Add a dual crop feature flag to distinguish the versions of the ISP that
support dual crop from those that don't, and make sure that the sink
crop is set to the sink format when dual crop is not supported.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Some versions of the ISP supported by the rkisp1 driver, such as the ISP
in the i.MX8MP, lack the self path. Support those ISP versions by adding
a self path feature flag, and massage the rest of the driver to support
the lack of a self path.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Some versions of the ISP supported by the rkisp1 driver, such as the ISP
in the i.MX8MP, implement configurable memory stride for the main path
the same way as already implemented by the driver for the self path.
Support this feature by adding a main stride feature flag and program
the corresponding registers accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Simplify feature tests with a macro that shortens lines.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add YAML doc for the system tick counter which is present on Ralink SoCs.
cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231212093443.1898591-1-sergio.paracuellos@gmail.com
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are two entries for CONFIG_ALPHA_GAMMA, with the second one
7 lines below. Merge them together.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For the same rationale as commit 54b8ae66ae ("kbuild: change
*FLAGS_<basetarget>.o to take the path relative to $(obj)").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit 54b8ae66ae ("kbuild: change *FLAGS_<basetarget>.o to take the
path relative to $(obj)") changed the syntax of per-file compiler flags.
The situation is the same for the following variables:
OBJECT_FILES_NON_STANDARD_<basetarget>.o
GCOV_PROFILE_<basetarget>.o
KASAN_SANITIZE_<basetarget>.o
KMSAN_SANITIZE_<basetarget>.o
KMSAN_ENABLE_CHECKS_<basetarget>.o
UBSAN_SANITIZE_<basetarget>.o
KCOV_INSTRUMENT_<basetarget>.o
KCSAN_SANITIZE_<basetarget>.o
KCSAN_INSTRUMENT_BARRIERS_<basetarget>.o
The <basetarget> is the filename of the target with its directory and
suffix stripped.
This syntax comes into a trouble when two files with the same basename
appear in one Makefile, for example:
obj-y += dir1/foo.o
obj-y += dir2/foo.o
OBJECT_FILES_NON_STANDARD_foo.o := y
OBJECT_FILES_NON_STANDARD_foo.o is applied to both dir1/foo.o and
dir2/foo.o. This syntax is not flexbile enough to handle cases where
one of them is a standard object, but the other is not.
It is more sensible to use the relative path to the Makefile, like this:
obj-y += dir1/foo.o
OBJECT_FILES_NON_STANDARD_dir1/foo.o := y
obj-y += dir2/foo.o
OBJECT_FILES_NON_STANDARD_dir2/foo.o := y
To maintain the current behavior, I made adjustments to the following two
Makefiles:
- arch/x86/entry/vdso/Makefile, which compiles vclock_gettime.o, vgetcpu.o,
and their vdso32 variants.
- arch/x86/kvm/Makefile, which compiles vmx/vmenter.o and svm/vmenter.o
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Sean Christopherson <seanjc@google.com>
Commit 3ce4f9c3fb ("net/ps3_gelic_net: Add gelic_descr structures") of
6.8-rc1 had a copy-and-paste error where the pointer that holds the
allocated SKB (struct gelic_descr.skb) was set to NULL after the SKB was
allocated. This resulted in a kernel panic when the SKB pointer was
accessed.
This fix moves the initialization of the gelic_descr to before the SKB
is allocated.
Reported-by: sambat goson <sombat3960@gmail.com>
Fixes: 3ce4f9c3fb ("net/ps3_gelic_net: Add gelic_descr structures")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move SA8775p PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-3-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC7280 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting exactly one MSI interrupt, instead of eight, because I
could not find interrupt details for this model and current DTS uses
one interrupt.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-2-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC8180X PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240205-dt-bindings-pci-qcom-split-continued-v1-1-c333cab5eeea@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Move SC8280XP compatible PCIe devices from qcom,pcie.yaml binding to a
dedicated file to make reviewing easier.
This creates equivalent schema file, except missing required compatible
which is actually redundant.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-6-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8350 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-5-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8150 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-4-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8250 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-3-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-2-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The qcom,pcie.yaml binding file containing all possible Qualcomm SoC
PCIe root complexes gets quite complicated with numerous if:then:
conditions customizing clocks, interrupts, regs and resets. Adding and
reviewing new devices is difficult, so simplify it by having shared
common binding and file with only one group of compatible devices:
1. Copy all common qcom,pcie.yaml properties (so everything except
supplies) to a new shared qcom,pcie-common.yaml schema.
2. Move SM8550 PCIe compatible devices to dedicated binding file.
This creates equivalent SM8550 schema file, except:
- Missing required compatible which is actually redundant.
- Expecting eight MSI interrupts, instead of only one, which was
incomplete hardware description.
Link: https://lore.kernel.org/linux-pci/20240126-dt-bindings-pci-qcom-split-v3-1-f23cda4d74c0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Since commit 5d93cfcf73 ("net: dpaa: Convert to phylink"), we support
the "10gbase-r" phy-mode through a driver-based conversion of "xgmii",
but we still don't actually support it when the device tree specifies
"10gbase-r" proper.
This is because boards such as LS1046A-RDB do not define pcs-handle-names
(for whatever reason) in the ethernet@f0000 device tree node, and the
code enters through this code path:
err = of_property_match_string(mac_node, "pcs-handle-names", "xfi");
// code takes neither branch and falls through
if (err >= 0) {
(...)
} else if (err != -EINVAL && err != -ENODATA) {
goto _return_fm_mac_free;
}
(...)
/* For compatibility, if pcs-handle-names is missing, we assume this
* phy is the first one in pcsphy-handle
*/
err = of_property_match_string(mac_node, "pcs-handle-names", "sgmii");
if (err == -EINVAL || err == -ENODATA)
pcs = memac_pcs_create(mac_node, 0); // code takes this branch
else if (err < 0)
goto _return_fm_mac_free;
else
pcs = memac_pcs_create(mac_node, err);
// A default PCS is created and saved in "pcs"
// This determination fails and mistakenly saves the default PCS
// memac->sgmii_pcs instead of memac->xfi_pcs, because at this
// stage, mac_dev->phy_if == PHY_INTERFACE_MODE_10GBASER.
if (err && mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
memac->xfi_pcs = pcs;
else
memac->sgmii_pcs = pcs;
In other words, in the absence of pcs-handle-names, the default
xfi_pcs assignment logic only works when in the device tree we have
PHY_INTERFACE_MODE_XGMII.
By reversing the order between the fallback xfi_pcs assignment and the
"xgmii" overwrite with "10gbase-r", we are able to support both values
in the device tree, with identical behavior.
Currently, it is impossible to make the s/xgmii/10gbase-r/ device tree
conversion, because it would break forward compatibility (new device
tree with old kernel). The only way to modify existing device trees to
phy-interface-mode = "10gbase-r" is to fix stable kernels to accept this
value and handle it properly.
One reason why the conversion is desirable is because with pre-phylink
kernels, the Aquantia PHY driver used to warn about the improper use
of PHY_INTERFACE_MODE_XGMII [1]. It is best to have a single (latest)
device tree that works with all supported stable kernel versions.
Note that the blamed commit does not constitute a regression per se.
Older stable kernels like 6.1 still do not work with "10gbase-r", but
for a different reason. That is a battle for another time.
[1] https://lore.kernel.org/netdev/20240214-ls1046-dts-use-10gbase-r-v1-1-8c2d68547393@concurrent-rt.com/
Fixes: 5d93cfcf73 ("net: dpaa: Convert to phylink")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some sysctl tables are registered for each namespace.
(Like in ipc/ipc_sysctl.c)
These need special handling to track the variable assignments.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Calls to __register_sysctl_table will be validated by
scripts/check-sysctl-docs. As this script is line-based remove the
linebreak which would confuse the script.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
The script expects the old sysctl_register_paths() API which was removed
some time ago. Adapt it to work with the new
sysctl_register()/sysctl_register_sz()/sysctl_register_init() APIs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
The two device node references taken during allocation need to be
dropped when the auxiliary device is freed.
Fixes: 6914968a0b ("drm/bridge: properly refcount DT nodes in aux bridge drivers")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240217150228.5788-2-johan+linaro@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-2-johan+linaro@kernel.org
Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
mode for 1G/100M/10M speed.
Added changes to configure serdes phy and mac based on link speed.
Changing serdes phy speed involves multiple register writes for
serdes block. To avoid redundant write operations only update serdes
phy when new speed is different.
For 2500 speed MAC PCS autoneg needs to disabled. Added changes to
disable MAC PCS autoneg if ANE parameter is not set.
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Tested-by: Abhishek Chauhan <quic_abchauha@quicinc.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable DU and link with DSI on RZ/{G2L,G2LC,V2L} SMARC EVK.
Move DSI port properties from board dtsi to SoC dtsi and then link with DU
and after that enable DU on the board dtsi.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240222132117.137729-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>