Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on ARM systems
with ARCH == ARMv6K.
[ paulmck: Apply Arnd Bergmann and Nathan Chancellor feedback. ]
[ paulmck: Apply Linus Walleij feedback. ]
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/54798f68-48f7-4c65-9cba-47c0bf175143@sirena.org.uk/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYuZ+pf6p8AXMZWtdFtX-gbG8HMaBKp=XbxcdzA_QeLkxQ@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Davis <afd@ti.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric DeVolder <eric.devolder@oracle.com>
Cc: Rob Herring <robh@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
This series adds QoS support for QNOC type device which can be found on
SC7280 platform. It adds support for programming priority,
priority forward disable and urgency forwarding. This helps in
priortizing the traffic originating from different interconnect masters
at NOC (Network On Chip).
* icc-rpmh-qos
dt-bindings: interconnect: add clock property to enable QOS on SC7280
interconnect: qcom: icc-rpmh: Add QoS configuration support
interconnect: qcom: sc7280: enable QoS configuration
interconnect: qcom: Fix DT backwards compatibility for QoS
Link: https://lore.kernel.org/r/20240607173927.26321-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add qos_clks_required flag to skip QoS configuration if clocks property
is not populated in devicetree for providers which require clocks to be
enabled for accessing registers. This is to keep the QoS configuration
backwards compatible with devices that have older DTB.
Reported-by: Bjorn Andersson <andersson@kernel.org>
Closes: https://lore.kernel.org/all/ciji6nlxn752ina4tmh6kwvek52nxpnguomqek6plwvwgvoqef@yrtexkpmn5br/
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Fixes: fbd908bb8b ("interconnect: qcom: sc7280: enable QoS configuration")
Link: https://lore.kernel.org/r/20240704125515.22194-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Fixed the PHY address and reset GPIOs (does not match the corresponding
pinctrl) for gmac0 and gmac1.
Fixes: b9f8ca655d ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240630150010.55729-7-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The R66S and R68S boards do not have HDMI output, so disable
the display subsystem.
Fixes: c79dab407a ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240701143028.1203997-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix the following error when booting:
[ 15.851853] platform fd800000.usb: deferred probe pending
[ 15.852384] platform fd840000.usb: deferred probe pending
[ 15.852881] platform fd880000.usb: deferred probe pending
This is due to usb2phy1 is not enabled. There is no USB 2.0
port on the board, just remove it.
Fixes: c79dab407a ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240630150010.55729-5-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fixes pmu_io_domains supply according to the schematic. Among them,
the vccio3 is responsible for the io voltage of sdcard. There is no
sdcard slot on the R68S, and it's connected to vcc_3v3, so describe
the supply of vccio3 separately.
Fixes: c79dab407a ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Fixes: b9f8ca655d ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240630150010.55729-4-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Remove the non-existent usb_host regulator and fix the supply according
to the schematic. Also remove the unnecessary always-on and boot-on for
the usb_otg regulator.
Fixes: c79dab407a ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240701143028.1203997-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
`da9121_1ch_regmap_config` and `da9121_2ch_regmap_config` are not
modified and can be declared as const to move their data to a
read-only section.
The pointer that references those structs has been converted to const
accordingly.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240704-regulator-const-regmap-v1-1-bce0ddef63ea@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been several attempts to set the dma-names property on the
SoC level (in rk356x.dtsi), but that appears to cause problems when set
on channels without flow control.
Quoting part of a previous attempt for clarification:
> Nah, enabling it for bluetooth is fine because you have flow control.
> My issues have been on channels without flow control. Without DMA it
> simply drops messages or the channel hangs until you close and reopen
> it. With DMA, when an overflow locks up the channel it is usually
> unavailable until the board is rebooted.
Setting it on the board level for the bluetooth connection was deemed
safe, so do so for the Quartz64 Model B.
This fixes the following error/warning:
of_dma_request_slave_channel: dma-names property of node
'/serial@fe650000' missing or empty
dw-apb-uart fe650000.serial: failed to request DMA
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://libera.irclog.whitequark.org/armlinux/2024-02-29
Link: https://lore.kernel.org/linux-rockchip/18284546.sWSEgdgrri@diego/
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240628120130.24076-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for voltage ranges to the GPU OPPs defined in the SoC dtsi for
Rockchip RK356x. This is, for example, useful for RK356x-based boards that
are designed to use the same power supply for the GPU and NPU portions of
the SoC, which is described further in the following documents:
- Rockchip RK3566 Hardware Design Guide, version 1.1.0, page 37
- Rockchip RK3568 Hardware Design Guide, version 1.2, page 78
The values for the exact GPU OPP voltages and the lower limits for the GPU
OPP voltage ranges differ from the values found in the vendor kernel source
(cf. downstream commit f8b9431ee38e ("arm64: dts: rockchip: rk3568: support
adjust opp-table by otp")), [1][2] and present the exact GPU OPP voltage
values that have served us well so far.
[1] f8b9431ee3
[2] https://raw.githubusercontent.com/rockchip-linux/kernel/f8b9431ee38ed561650be7092ab93f564598daa9/arch/arm64/boot/dts/rockchip/rk3568.dtsi
Suggested-by: Diederik de Haas <didi.debian@cknow.org>
Helped-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/7e9ba70fd54a21d6f1f267df11e0acabff8d24e0.1719763100.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rtl82xx DT bindings do not require ethernet-phy-ieee802.3-c22
as the fallback compatible string. There are fewer users of the
Realtek PHY compatible string with fallback compatible string than
there are users without fallback compatible string, so drop the
fallback compatible string from the few remaining users:
$ git grep -ho ethernet-phy-id001c....... | sort | uniq -c
1 ethernet-phy-id001c.c816",
2 ethernet-phy-id001c.c915",
2 ethernet-phy-id001c.c915";
5 ethernet-phy-id001c.c916",
13 ethernet-phy-id001c.c916";
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406290316.YvZdvLxu-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240630034910.173552-2-marex@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The iommu@fe043e00 on RK356x SoC shares the VOP power domain, but the
power-domains property was not provided when the node has been added.
The consequence is that an attempt to reload the rockchipdrm module will
freeze the entire system. That is because on probe time,
pm_runtime_get_suppliers() gets called for vop@fe040000, which blocks
when pm_runtime_get_sync() is being invoked for iommu@fe043e00.
Fix the issue by adding the missing property.
Fixes: 9d6c6d978f ("arm64: dts: rockchip: rk356x: Add VOP2 nodes")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240702-rk356x-fix-vop-mmu-v1-1-a66d1a0c45ea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
CLK_NR_CLKS should not be part of the binding.
Remove since the kernel code no longer uses it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6f21c09b-e8d2-4749-aca6-572c79df775d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rtl82xx DT bindings do not require ethernet-phy-ieee802.3-c22
as the fallback compatible string. There are fewer users of the
Realtek PHY compatible string with fallback compatible string than
there are users without fallback compatible string, so drop the
fallback compatible string from the few remaining users:
$ git grep -ho ethernet-phy-id001c....... | sort | uniq -c
1 ethernet-phy-id001c.c816",
2 ethernet-phy-id001c.c915",
2 ethernet-phy-id001c.c915";
5 ethernet-phy-id001c.c916",
13 ethernet-phy-id001c.c916";
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406290316.YvZdvLxu-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240630034910.173552-1-marex@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Merge series from Herve Codina <herve.codina@bootlin.com>:
The qmc_audio driver supports only audio in interleaved mode.
Non-interleaved mode can be easily supported using several QMC channel
per DAI. In that case, data related to ch0 are sent to (received from)
the first QMC channel, data related to ch1 use the next QMC channel and
so on up to the last channel.
In terms of constraints and settings, the interleaved and
non-interleaved modes are slightly different.
In interleaved mode:
- The sample size should fit in the number of time-slots available for
the QMC channel.
- The number of audio channels should fit in the number of time-slots
(taking into account the sample size) available for the QMC channel.
In non-interleaved mode:
- The number of audio channels is the number of available QMC
channels.
- Each QMC channel should have the same number of time-slots.
- The sample size equals the number of time-slots of one QMC channel.
This series add support for the non-interleaved mode in the qmc_audio
driver and is composed of the following parts:
- Patches 1 and 2: Fix some issues in the qmc_audio
- Patches 3 to 6: Prepare qmc_audio for the non-interleaved mode
- Patches 7 and 8: Extend the QMC driver API
- Patches 9 and 10: The support for non-interleaved mode itself
Compared to the previous iteration, this v2 series mainly improves
qmc_audio_access_is_interleaved().
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Improve a bit the Qualcomm LPASS RX macro driver and align similar parts
of code with LPASS WSA macro driver for consistency.
No external dependencies.
-----BEGIN PGP SIGNATURE-----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=tyXO
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix folio refcounting when releasing them (encoded write, dummy
extent buffer)
- fix out of bounds read when checking qgroup inherit data
- fix how configurable chunk size is handled in zoned mode
- in the ref-verify tool, fix uninitialized return value when checking
extent owner ref and simple quota are not enabled
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
btrfs: fix folio refcount in btrfs_do_encoded_write()
btrfs: fix uninitialized return value in the ref-verify tool
btrfs: always do the basic checks for btrfs_qgroup_inherit structure
btrfs: zoned: fix calc_available_free_space() for zoned mode
On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK
signal is selectable to support an Ethernet PHY operating in either MII
or RGMII mode. By default, the signal is configured as an input and MII
mode is supported. The ETH_MODE register can be modified to configure
this signal as an output to support RGMII mode.
As this signal is by default an input, and can optionally be switched to
an output, it maps neatly onto an `output-enable` property in the device
tree.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-4-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The variable naming in the various OEN functions has been confusing. We
were passing the _pin & bit variables from rzg2l_pinctrl_pinconf_get()
and rzg2l_pinctrl_pinconf_set() as the offset & pin argument to the
oen_read() and oen_write() functions. This doesn't make sense, the first
of these isn't actually an offset and the second is not needed for
RZ/V2H but leads to confusion with the bit variable used within these
functions.
To tidy this up, instead pass the _pin variable directly to the
oen_read() and oen_write() functions with consistent naming. Then
rzg3s_read_oen() and rzg3s_write_oen() can use macros to get the port
and pin numbers it needs.
Instead of passing the pin capabilities into oen_read() and oen_write(),
check that the pin supports OEN before calling these functions.
Also, merge rzg3s_oen_is_supported() into rzg3s_pin_to_oen_bit() to give
a single translation function which returns an error if the pin doesn't
support OEN. While we're here, remove an unnecessary branch and clarify
the variable naming. Lastly, check that we are not dealing with a
dedicated pin before calling RZG2L_PIN_ID_TO_{PORT,PIN}().
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-3-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
We currently support OEN read/write for the RZ/G3S SoC but not the
RZ/G2L SoC family (consisting of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L &
RZ/Five). The appropriate functions are renamed to clarify this and to
match the callback names.
We should also only set the oen_read and oen_write function pointers for
the devices which support these operations. This requires us to check
that these function pointers are valid before calling them.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-2-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Breno Leitao says:
====================
crypto: caam: Unembed net_dev
This will un-embed the net_device struct from inside other struct, so we
can add flexible array into net_device.
This also enable COMPILE test for FSL_CAAM, as any config option that
depends on ARCH_LAYERSCAPE.
====================
Link: https://patch.msgid.link/20240702185557.3699991-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_devices from struct dpaa2_caam_priv_per_cpu by
converting them into pointers, and allocating them dynamically. Use the
leverage alloc_netdev_dummy() to allocate the net_device object at
dpaa2_dpseci_setup().
The free of the device occurs at dpaa2_dpseci_disable().
Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240702185557.3699991-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_devices from struct caam_qi_pcpu_priv by converting them
into pointers, and allocating them dynamically. Use the leverage
alloc_netdev_dummy() to allocate the net_device object at
caam_qi_init().
The free of the device occurs at caam_qi_shutdown().
Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240702185557.3699991-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As most of the drivers that depend on ARCH_LAYERSCAPE, make
CRYPTO_DEV_FSL_CAAM depend on COMPILE_TEST for compilation and testing.
# grep -r depends.\*ARCH_LAYERSCAPE.\*COMPILE_TEST | wc -l
29
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240702185557.3699991-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If caam module is built without OF support, the compiler returns the
following warning:
drivers/crypto/caam/ctrl.c:83:34: warning: 'imx8m_machine_match' defined but not used [-Wunused-const-variable=]
imx8m_machine_match is only referenced by of_match_node(), which is set
to NULL if CONFIG_OF is not set, as of commit 5762c20593 ("dt: Add
empty of_match_node() macro"):
#define of_match_node(_matches, _node) NULL
Do not create imx8m_machine_match if CONFIG_OF is not set.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407011309.cpTuOGdg-lkp@intel.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240702185557.3699991-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9.
We're trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new garbage
collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page,
in case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when
more queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MZAG
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
Commit 202aa0d4bb ("thermal: core: Do not call handle_thermal_trip()
if zone temperature is invalid") caused __thermal_zone_device_update()
to return early if the current thermal zone temperature was invalid.
This was done to avoid running handle_thermal_trip() and governor
callbacks in that case which led to confusion. However, it went too
far because monitor_thermal_zone() still needs to be called even when
the zone temperature is invalid to ensure that it will be updated
eventually in case thermal polling is enabled and the driver has no
other means to notify the core of zone temperature changes (for example,
it does not register an interrupt handler or ACPI notifier).
Also if the .set_trips() zone callback is expected to set up monitoring
interrupts for a thermal zone, it has to be provided with valid
boundaries and that can only happen if the zone temperature is known.
Accordingly, to ensure that __thermal_zone_device_update() will
run again after a failing zone temperature check, make it call
monitor_thermal_zone() regardless of whether or not the zone
temperature is valid and make the latter schedule a thermal zone
temperature update if the zone temperature is invalid even if
polling is not enabled for the thermal zone.
Fixes: 202aa0d4bb ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2764814.mvXUDI8C0e@rjwysocki.net
[ rjw: Changed THERMAL_RECHECK_DELAY_MS to 250 ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix and add physical to virtual address translations in dasd and
virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
More code cleanup will follow.
- Small defconfig updates
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmaGrwoACgkQIg7DeRsp
bsI6VxAAlGcZEERzkbDNyEOpuEsTb6pgGQ4EvJKsBlDS53d6kO4FLPZGxAiL7mJi
GgtZg7ydABRU55ZPRRbJ2g5vtHAN8PqFsFzgxxIsCPWZUDj/wyRL5y+4lz4/q8ZJ
AXy/Tk4Ck9qvZF1nPqdxLBPONeDqv7bgEIPiFYhPlq+HesAl+DKsd0oYg7Ur9Sk4
IMvsr0Rc063h7sZAwL8VgwsZxeA8UF5g+OKuoa6huPlu0gvIADlTUa1rUuKn8s5b
o39zoRMSGUZ1wpLWQasnHf4qYY4xhbBv5Uw8HWxoGXsw6DXXkKrcd9VhdSJY7P+E
CYV0N5EwFYsQjGH07XOWbks9pAyFVpyz8sMlzhlHBQziFa6kyRxkAVHabGNNXJKj
XtMb5MjjngGa4qhZ4SuHBuT9bzO4IGn2qW8aigEvhX5ti6hZMw4ypLt78Y2WqbXJ
yZD37Cj8aUDw2EVbNHDBSwPjTaAsOFYtIVstbWD4tvR/JeBI5wESGQQJmkDFRrVI
HIE21dCgDiQ+uT7EmnhJux3OWniKIlMDV/Ibcw91nc0ICENdsYa5N0uOoqx1goMR
Ob3n+D5GReUESfmBOazC8SxDfMOMWJj9zOEavcxZSbF3k6Giw9PYo0xl2LUx4nCK
qrc8s4I7rPcNoBJGzkhF3YNqd8u5rHuta3BpEWkNfnw9fmOVdO8=
=A26e
-----END PGP SIGNATURE-----
Merge tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix and add physical to virtual address translations in dasd and
virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
More code cleanup will follow.
- Small defconfig updates
* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
s390/vfio_ccw: Fix target addresses of TIC CCWs
s390: Update defconfigs
Simple syscon nodes can be documented in common syscon.yaml, however
devices with simple-mfd compatible, thus with some children, should have
their own schema listing these children. Such listing makes the binding
specific, allows better validation (so the incorrect child would not
appear in the simple-mfd node) and actually enforces repeated rule for
simple-mfd devices:
"simple-mfd" is only for simple devices, where the children do not
depend on the parent.
Currently the syscon+simple-mfd binding is quite broad and allows
any child or property, thus above rule cannot be enforced.
Split the syscon.yaml binding into:
1. Common syscon properties, used potentially by many bindings.
2. Simple syscon devices (NO simple-mfd!).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240627-dt-bindings-mfd-syscon-split-v4-6-dc6699a9f3e4@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Rockchip RK809 PMIC is compatible with RK817 and provides the same
capabilities, except for the battery charger manager.
There are also minor regulator related differences: BOOST and OTG_SWITCH
are specific to RK817, while DCDC_REG5, SWITCH_REG1 and SWITCH_REG2 are
provided RK809.
The current binding for RK809 doesn't document the audio codec
properties, although it has been already in use by several boards:
rk3566-quartz64-b, k3566-roc-pc, rk3568-evb1-v10, rk3568-lubancat-2,
rk3568-odroid-m1, rk3568-rock-3a.
Therefore dtbs_check fails for all of them:
DTC_CHK arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb
rk3568-rock-3a.dtb: pmic@20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks', 'clock-names', 'clocks', 'codec' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
Additionally, the example in rockchip,rk809 binding is not able to
actually test the schema since it uses a wrong compatible
'rockchip,rk808' instead of the expected 'rockchip,rk809'.
Instead of duplicating even more content, merge the RK809 support into
the more inclusive RK817 schema and drop the now obsolete rockchip,rk809
related file.
Fixes: 6c38ca0340 ("dt-bindings: mfd: rk808: Convert bindings to yaml")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240622-rk809-fixes-v2-2-c0db420d3639@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
Ensure 'clocks' property does not allow more than one item and add the
missing reference to dai-common schema.
While at it, move 'clocks*' and '#sound-dai-cells' properties to keep
the list ordered alphabetically.
Additionally, drop all useless/redundant descriptions.
Fixes: 6c38ca0340 ("dt-bindings: mfd: rk808: Convert bindings to yaml")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240622-rk809-fixes-v2-1-c0db420d3639@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
The JTAG_USER_ID_USERCODE efuse address, which is located inside the
WKUP_CTRL_MMR0 range holds information to identify the speed grades of
various components on TI's K3 SoCs. Add a compatible to allow the
cpufreq driver to obtain the data to limit the maximum frequency for the
CPUs under Linux control.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240621-ti-opp-updates-v3-3-d857be6dac8b@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
changed the memory allocation of 'tll' to consolidate it into a single
allocation, introducing an incorrect size calculation.
In particular, the allocation for the array of pointers was converted
into a single-pointer allocation.
The memory allocation used to occur in two steps:
tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
GFP_KERNEL);
And it turned that into the following allocation:
tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]),
GFP_KERNEL);
sizeof(tll->ch_clk[nch]) returns the size of a single pointer instead of
the expected nch pointers.
This bug went unnoticed because the allocation size was small enough to
fit within the minimum size of a memory allocation for this particular
case [1].
The complete allocation can still be done at once with the struct_size
macro, which comes in handy for structures with a trailing flexible
array.
Fix the memory allocation to obtain the original size again.
Link: https://lore.kernel.org/all/202406261121.2FFD65647@keescook/ [1]
Fixes: 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Fixes: commit 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
Link: https://lore.kernel.org/r/20240626-omap-usb-tll-counted_by-v2-1-4bedf20d1b51@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Common mistake of usage of 'simple-mfd' compatible is a dependency of
children on resources acquired and managed by the parent, e.g. clocks.
Extend the simple-mfd documentation to cover this case.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240623134600.115098-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Change include/dt-bindings/mfd/st,stpmic1.h license model from GPLv2.0
only to dual GPLv2.0 or BSD-2-Clause. I have every legitimacy to request
this change on behalf of STMicroelectronics. This change clarifies that
this DT binding header file can be shared with software components as
bootloaders and OSes that are not published under GPLv2 terms.
In CC are all the contributors to this header file.
Cc: Pascal Paillet <p.paillet@st.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240617092016.2958046-1-etienne.carriere@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use the __counted_by compiler attribute for the "struct clk *ch_clk[]"
flexible array member to improve the results of array bound sanitizers.
The comments for the variables are no longer needed as it is now clear
what is what.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240620-omap-usb-tll-counted_by-v1-1-77797834bb9a@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This simplifies probe and also allows us to remove the remove
callbacks from the core and interface drivers. Do that here.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240613175430.57698-1-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use spi_get_device_match_data() helper to simplify a bit the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240606142457.130553-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Use spi_get_device_match_data() helper to simplify a bit the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240606142457.130553-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
