The commit ea489a3d98 ("drm/ci: add sc7180-trogdor-kingoftown")
dropped the msm-sc7180-skips.txt file, which disabled suspend-to-RAM
tests. However testing shows that STR tests still can fail. Restore the
skiplist, applying it to both limozeen and kingoftown machines.
Fixes: ea489a3d98 ("drm/ci: add sc7180-trogdor-kingoftown")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216205650.2446153-1-dmitry.baryshkov@linaro.org
Open-coding the feature matching parameters for LVA/LVA2 leads to
issues with upcoming changes to the cpufeature code.
By making TGRAN{4,16,64} and VARange signed/unsigned as per the
architecture, we can use the existing macros, making the feature
match robust against those changes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some code manipulating the vif list is still missing some srcu_read_lock /
srcu_read_unlock, and so can trigger RCU warnings:
=============================
WARNING: suspicious RCU usage
6.8.0-rc1+ #37 Not tainted
-----------------------------
drivers/net/wireless/microchip/wilc1000/hif.c:110 RCU-list traversed without holding the required lock!!
[...]
stack backtrace:
CPU: 0 PID: 6 Comm: kworker/0:0 Not tainted 6.8.0-rc1+ #37
Hardware name: Atmel SAMA5
Workqueue: events sdio_irq_work
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x58
dump_stack_lvl from wilc_get_vif_from_idx+0x158/0x180
wilc_get_vif_from_idx from wilc_network_info_received+0x80/0x48c
wilc_network_info_received from wilc_handle_isr+0xa10/0xd30
wilc_handle_isr from wilc_sdio_interrupt+0x44/0x58
wilc_sdio_interrupt from process_sdio_pending_irqs+0x1c8/0x60c
process_sdio_pending_irqs from sdio_irq_work+0x6c/0x14c
sdio_irq_work from process_one_work+0x8d4/0x169c
process_one_work from worker_thread+0x8cc/0x1340
worker_thread from kthread+0x448/0x510
kthread from ret_from_fork+0x14/0x28
Fix those warnings by adding the needed lock around the corresponding
critical sections
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215-wilc_fix_rcu_usage-v1-4-f610e46c6f82@bootlin.com
Enabling CONFIG_PROVE_RCU_LIST raises many warnings in wilc driver, even on
some places already protected by a read critical section. An example of
such case is in wilc_get_available_idx:
=============================
WARNING: suspicious RCU usage
6.8.0-rc1+ #32 Not tainted
-----------------------------
drivers/net/wireless/microchip/wilc1000/netdev.c:944 RCU-list traversed in non-reader section!!
[...]
stack backtrace:
CPU: 0 PID: 26 Comm: kworker/0:3 Not tainted 6.8.0-rc1+ #32
Hardware name: Atmel SAMA5
Workqueue: events_freezable mmc_rescan
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x58
dump_stack_lvl from wilc_netdev_ifc_init+0x788/0x8ec
wilc_netdev_ifc_init from wilc_cfg80211_init+0x690/0x910
wilc_cfg80211_init from wilc_sdio_probe+0x168/0x490
wilc_sdio_probe from sdio_bus_probe+0x230/0x3f4
sdio_bus_probe from really_probe+0x270/0xdf4
really_probe from __driver_probe_device+0x1dc/0x580
__driver_probe_device from driver_probe_device+0x60/0x140
driver_probe_device from __device_attach_driver+0x268/0x364
__device_attach_driver from bus_for_each_drv+0x15c/0x1cc
bus_for_each_drv from __device_attach+0x1ec/0x3e8
__device_attach from bus_probe_device+0x190/0x1c0
bus_probe_device from device_add+0x10dc/0x18e4
device_add from sdio_add_func+0x1c0/0x2c0
sdio_add_func from mmc_attach_sdio+0xa08/0xe1c
mmc_attach_sdio from mmc_rescan+0xa00/0xfe0
mmc_rescan from process_one_work+0x8d4/0x169c
process_one_work from worker_thread+0x8cc/0x1340
worker_thread from kthread+0x448/0x510
kthread from ret_from_fork+0x14/0x28
This warning is due to the section being protected by a srcu critical read
section, but the list traversal being done with classic RCU API. Fix the
warning by using corresponding SRCU read lock/unlock APIs. While doing so,
since we always manipulate the same list (managed through a pointer
embedded in struct_wilc), add a macro to reduce the corresponding
boilerplate in each call site.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215-wilc_fix_rcu_usage-v1-2-f610e46c6f82@bootlin.com
Move netif_wake_queue and its surrounding RCU operations in a dedicated
function to clarify wilc_txq_task and ease refactoring
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215-wilc_fix_rcu_usage-v1-1-f610e46c6f82@bootlin.com
Reset hardware state to prevent hardware stays at abnormal state during
setting channel. Besides, add preparation for MLO/DBCC before setting
channel, and reconfigure registers after that.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215055741.14148-5-pkshih@realtek.com
Configure RF registers according to band, channel, bandwidth. Since this
chip will support MLO, it needs check the operating mode to decide paths
we are going to configure.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215055741.14148-4-pkshih@realtek.com
In additional to configure band, channel and bandwidth registers, it also
configure CCK support on 2GHZ band, spur elimination, and RX gain.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215055741.14148-3-pkshih@realtek.com
To set channel, add a function to get TXSB (TX subband) that is hardware
index to indicate primary channel. Then, configure band, channel,
bandwidth and TXSB via registers.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240215055741.14148-2-pkshih@realtek.com
When set_pud() is called on a 4-level paging build config that runs with
3 levels at runtime (which happens with 16k page size builds with
support for LPA2), the updated entry is in fact a PGD in
swapper_pg_dir[], and this is mapped read-only after boot.
So in this case, the existing check needs to be performed as well, even
though __PAGETABLE_PUD_FOLDED is not #define'd. So replace the #ifdef
with a call to pgtable_l4_enabled().
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240216235944.3677178-2-ardb+git@google.com
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mrlock was an rwsem wrapper that also recorded whether the lock was
held for read or write. Now that we can ask the generic code whether
the lock is held for read or write, we can remove this wrapper and use
an rwsem directly.
As the comment says, we can't use lockdep to assert that the ILOCK is
held for write, because we might be in a workqueue, and we aren't able
to tell lockdep that we do in fact own the lock.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
To use the new rwsem_assert_held()/rwsem_assert_held_write(), we can't
use the existing ASSERT macro. Add a new xfs_assert_ilocked() and
convert all the callers.
Fix an apparent bug in xfs_isilocked(): If the caller specifies
XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL, xfs_assert_ilocked() will check both
the IOLOCK and the ILOCK are held for write. xfs_isilocked() only
checked that the ILOCK was held for write.
xfs_assert_ilocked() is always on, even if DEBUG or XFS_WARN aren't
defined. It's a cheap check, so I don't think it's worth defining
it away.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Modelled after lockdep_assert_held() and lockdep_assert_held_write(),
but are always active, even when lockdep is disabled. Of course, they
don't test that _this_ thread is the owner, but it's sufficient to catch
many bugs and doesn't incur the same performance penalty as lockdep.
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
While calculating the hardware interrupt number for a MSI interrupt, the
higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI
domain number gets truncated because of the shifted value casting to return
type of pci_domain_nr() which is 'int'. This for example is resulting in
same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0.
To address this cast the PCI domain number to 'irq_hw_number_t' before left
shifting it to calculate the hardware interrupt number.
Please note that this fixes the issue only on 64-bit systems and doesn't
change the behavior for 32-bit systems i.e. the 32-bit systems continue to
have the issue. Since the issue surfaces only if there are too many PCIe
controllers in the system which usually is the case in modern server
systems and they don't tend to run 32-bit kernels.
Fixes: 3878eaefb8 ("PCI/MSI: Enhance core to support hierarchy irqdomain")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com
Instead of open coding, use the mipi_dsi_pixel_format_to_bpp() helper
function from drm_mipi_dsi.h in mtk_dsi_poweron() and for validation
in mtk_dsi_bridge_mode_valid().
Note that this function changes the behavior of this driver: previously,
in case of unknown formats, it would (wrongly) assume that it should
account for a 24-bits format - now it will return an error and refuse
to set clocks and/or enable the DSI.
This is done because setting the wrong data rate will only produce a
garbage output that the display will misinterpret both because this
driver doesn't actually provide any extra-spec format support and/or
because the data rate (hence, the HS clock) will be wrong.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
All entries fit in 82 columns, which is acceptable: compress all of
the mtk_dsi_of_match[] entries to a single line for each.
While at it, also add the usual sentinel comment to the last entry.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-9-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Most of the functions that are called in the probe callback are
devm managed, or all but mipi_dsi_host_register(): simplify the probe
function's error paths with dev_err_probe() and remove the lonely
instance of `goto err_unregister_host` by just directly calling the
mipi_dsi_host_unregister() function in the devm_request_irq() error
path, allowing to also remove the same label.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-8-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Registering the dsi host with its ops before getting dsi->regs is
simply wrong: even though there's nothing (for now) asynchronously
calling those ops before the end of the probe function, installing
ops that are using iospace(s) and clocks before even initializing
those is too fragile.
Register the DSI host after getting clocks, iospace and PHY.
This wil also allow to simplify the error paths in a later commit.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-7-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In mtk_dsi_phy_timconfig(), we're dividing the `data_rate` variable,
expressed in Hz to retrieve a value in MHz: instead of open-coding,
use the HZ_PER_MHZ definition, available in linux/units.h.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-6-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Instead of open coding bitshifting for various register fields,
use the bitfield macro FIELD_PREP(): this allows to enhance the
human readability, decrease likeliness of mistakes (and register
field overflowing) and also to simplify the code.
The latter is especially seen in mtk_dsi_rxtx_control(), where
it was possible to change a switch to a short for loop and to
also remove the need to check for maximum DSI lanes == 4 thanks
to the FIELD_PREP macro masking the value.
While at it, also add the missing DA_HS_SYNC bitmask, used in
mtk_dsi_phy_timconfig().
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-5-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Function mtk_dsi_ps_control() is a subset of mtk_dsi_ps_control_vact():
merge the two in one mtk_dsi_ps_control() function by adding one
function parameter `config_vact` which, when true, writes the VACT
related registers.
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The register bits definitions for RGB666 formats are wrong in multiple
ways: first, in the DSI_PS_SEL bits region, the Packed 18-bits RGB666
format is selected with bit 1, while the Loosely Packed one is bit 2,
and second - the definition name "LOOSELY_PS_18BIT_RGB666" is wrong
because the loosely packed format is 24 bits instead!
Either way, functions mtk_dsi_ps_control_vact() and mtk_dsi_ps_control()
do not even agree on the DSI_PS_SEL bit to set in DSI_PSCTRL: one sets
loosely packed (24) on RGB666, the other sets packed (18), and the other
way around for RGB666_PACKED.
Fixing this entire stack of issues is done in one go:
- Use the correct bit for the Loosely Packed RGB666 definition
- Rename LOOSELY_PS_18BIT_RGB666 to LOOSELY_PS_24BIT_RGB666
- Change ps_bpp_mode in mtk_dsi_ps_control_vact() to set:
- Loosely Packed, 24-bits for MIPI_DSI_FMT_RGB666
- Packed, 18-bits for MIPI_DSI_FMT_RGB666_PACKED
Fixes: 2e54c14e31 ("drm/mediatek: Add DSI sub driver")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Change magic numerical masks with usage of the GENMASK() macro
to improve readability.
This commit brings no functional changes.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240215085316.56835-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as
explained in the description of Interrupt Completion in the PLIC spec:
"The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored."
Commit 69ea463021 ("irqchip/sifive-plic: Fixup EOI failed when masked")
ensured that EOI is successful by enabling interrupt first, before EOI.
Commit a1706a1c50 ("irqchip/sifive-plic: Separate the enable and mask
operations") removed the interrupt enabling code from the previous
commit, because it assumes that interrupt should already be enabled at the
point of EOI.
However, this is incorrect: there is a window after a hart claiming an
interrupt and before irq_desc->lock getting acquired, interrupt can be
disabled during this window. Thus, EOI can be invoked while the interrupt
is disabled, effectively nullify this EOI. This results in the interrupt
never gets asserted again, and the device who uses this interrupt appears
frozen.
Make sure that interrupt is really enabled before EOI.
Fixes: a1706a1c50 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
The VBUS register block on the PM6150 PMIC shares the design with the
PM8150B one. Define corresponding compatible string, having the
qcom,pm8150b-vbus-reg as a fallback.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240217163201.32989-2-danila@jiaxyga.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The change to use "target" requires an underline to be extended by
one more character to fix a documentation build warning:
Documentation/spi/spi-summary.rst:274: WARNING: Title underline too short.
Declare target Devices
^^^^^^^^^^^^^^^^^^^^^
Fixes: hash ("spi: Update the "master/slave" terminology in documentation")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dhruva Gole <d-gole@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://msgid.link/r/20240216051637.10920-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds common1 register space for AM62A SoC which is using TI's Keystone
display hardware and supporting it as described in
Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
Fixes: 3618811657 ("arm64: dts: ti: k3-am62a-main: Add node for Display SubSystem (DSS)")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240216062426.4170528-5-devarsht@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This adds common1 register space for AM62x SoC which is using TI's Keystone
display hardware and supporting it as described in
Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
Fixes: 8ccc1073c7 ("arm64: dts: ti: k3-am62-main: Add node for DSS")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240216062426.4170528-4-devarsht@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This adds common1 register space for AM65x SoC which is using TI's Keystone
display hardware and supporting it as described in
Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
Fixes: fc539b90ed ("arm64: dts: ti: am654: Add DSS node")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240216062426.4170528-3-devarsht@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
amd_pmf_init_smart_pc() calls out to amd_pmf_get_bios_buffer() but
the error handling flow doesn't clean everything up allocated
memory.
As amd_pmf_get_bios_buffer() is only called by amd_pmf_init_smart_pc(),
fold it into the function and add labels to clean up any step that
can fail along the way. Explicitly set everything allocated to NULL as
there are other features that may access some of the same variables.
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217014107.113749-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If a machine advertises Smart PC support but is missing policy data
show a debugging message to help clarify why Smart PC wasn't enabled.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217014107.113749-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The external output reset signal was originally disabled and sent from
firmware. However, an unfixed bug in the firmware on tomato prevents
the signal from being sent, causing the device to fail to boot. To fix
this, enable external output reset signal to allow the device to reboot
normally.
Fixes: 5eb2e303ec ("arm64: dts: mediatek: Introduce MT8195 Cherry platform's Tomato")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240124-send-upstream-v3-1-5097c9862a73@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
TEE enact command failures are seen after each suspend/resume cycle;
fix this by cancelling the policy builder workqueue before going into
suspend and reschedule the workqueue after resume.
[ 629.516792] ccp 0000:c2:00.2: tee: command 0x5 timed out, disabling PSP
[ 629.516835] amd-pmf AMDI0102:00: TEE enact cmd failed. err: ffff000e, ret:0
[ 630.550464] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_RESPONSE:1
[ 630.550511] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_ARGUMENT:7
[ 630.550548] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_MESSAGE:16
Fixes: ae82cef7d9 ("platform/x86/amd/pmf: Add support for PMF-TA interaction")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240216064112.962582-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Improve code readability by removing smart_pc_status enum, as the same
can be done with a simple true/false check; Update the code checks
accordingly.
Also add a missing return on amd_pmf_init_smart_pc() success,
to skip trying to setup the auto / slider modes which should
not be used in this case.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240216064112.962582-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Shared Memory Pool (SMP) state is a part of the MDP5's private
object state. Use existing infrastructure, atomic_print_state()
callback, to dump SMP state (which also makes it included into
debugfs/dri/N/state). This allows us to drop the custom debugfs file
too.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570179/
Link: https://lore.kernel.org/r/20231203000532.1290480-5-dmitry.baryshkov@linaro.org
ext2 git address is missing, add it.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240219063718.3682824-1-chao@kernel.org>
Persistent exec_queues delays explicit destruction of exec_queues
until they are done executing, but destruction on process exit
is still immediate. It turns out no UMD is relying on this
functionality, so remove it. If there turns out to be a use-case
in the future, let's re-add.
Persistent exec_queues were never used for LR VMs
v2:
- Don't add an "UNUSED" define for the missing property
(Lucas, Rodrigo)
v3:
- Remove the remaining struct xe_exec_queue::persistent state
(Niranjana, Lucas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209113444.8396-1-thomas.hellstrom@linux.intel.com
Now that prefix matches for ACPI names are supported, the ts_dmi_data
structs for "GDIX1001:00" and "GDIX1001:01" can be consolidated into
a single match matching on "GDIX1001".
For consistency also change gdix1002_00_upside_down_data to match.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-2-hdegoede@redhat.com
On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.
This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".
Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".
Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.
Link: https://linux-hardware.org/?computer=AC4301C0542A
Fixes: bbb97d728f ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet")
Closes: https://github.com/onitake/gsl-firmware/issues/91
Cc: stable@vger.kernel.org
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com
Since commit 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler
for SCI") the ACPI OSL code passes IRQF_ONESHOT when requesting the SCI.
Since the INT0002 GPIO is typically shared with the ACPI SCI the INT0002
driver must pass the same flags.
This fixes the INT0002 driver failing to probe due to following error +
as well as removing the backtrace that follows this error:
"genirq: Flags mismatch irq 9. 00000084 (INT0002) vs. 00002080 (acpi)"
Fixes: 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler for SCI")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210110149.12803-1-hdegoede@redhat.com
The Lenovo workstations require the password opcode to be run before
the attribute value is changed (if Admin password is enabled).
Tested on some Thinkpads to confirm they are OK with this order too.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 640a5fa50a ("platform/x86: think-lmi: Opcode support")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240209152359.528919-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Bring in hardware support for the SDM660 and SDM630 platforms, which
belong to the same DPU generation as MSM8998.
Note, by default these platforms are still handled by the MDP5 driver
unless the `msm.prefer_mdp5=false' parameter is provided.
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577507/
Link: https://lore.kernel.org/r/20240208-fd-migrate-mdp5-v4-4-945d08ef3fa8@linaro.org
For some of the platforms (e.g. SDM660, SDM630, MSM8996, etc.) it is
possible to support this platform via the DPU driver (e.g. to provide
support for DP, multirect, etc). Add a modparam to be able to switch
between these two drivers.
All platforms supported by both drivers are by default handled by the
MDP5 driver. To let them be handled by the DPU driver pass the
`msm.prefer_mdp5=false` kernel param.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577504/
Link: https://lore.kernel.org/r/20240208-fd-migrate-mdp5-v4-3-945d08ef3fa8@linaro.org