Cadence have several controllers from 0x000403xx family but current
driver suuport detecting only one with DID equal 0x0004034E.
It causes that if someone uses different CDNSP controller then driver
will use incorrect version and register space.
Patch fix this issue.
cc: stable@vger.kernel.org
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20240215121609.259772-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
host.c file has some parts of code that were introduced for CDNS3 driver
and should not be used with CDNSP driver.
This patch blocks using these parts of codes by CDNSP driver.
These elements include:
- xhci_plat_cdns3_xhci object
- cdns3 specific XECP_PORT_CAP_REG register
- cdns3 specific XECP_AUX_CTRL_REG1 register
cc: stable@vger.kernel.org
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20240206104018.48272-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local helper function to compare the given pair of cycle count
evaluates them. If the left value is less than the right value, the
function returns negative value.
If the safe cycle is less than the current cycle, it is the case of
cycle lost. However, it is not currently handled properly.
This commit fixes the bug.
Cc: <stable@vger.kernel.org>
Fixes: 705794c53b ("ALSA: firewire-lib: check cycle continuity")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240218033026.72577-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Miglia Technology ships Harmony Audio 2004. It uses Oxford Semiconductor
OXFW970 for communication function in IEEE 1394 bus. This commit adds
support for the model.
In my opinion, the firmware of ASIC is really the initial stage, since
it has the following quirks.
* It skips several isochronous cycles to transmit isochronous packets
when receiving any asynchronous transaction.
* The value of dbc field in the transmitted packet is the number of
accumulated quadlets in CIP payload, instead of the accumulated data
blocks. Furthermore, the value includes the quadlets of CIP payload in
the packet.
* It neither supports AV/C Stream Format Information command nor AV/C
Extended Stream Format Information command.
* The vendor and model information in root directory of configuration
ROM includes some mistakes.
Additionally, when operating at 96.0 kHz, it often skips much isochronous
cycles to transmit the isochronous packets. The issue is detected as cycle
discontinuity and ALSA PCM application receives -EIO at any operation for
PCM substream. I have never found any workaround yet.
$ config-rom-pretty-printer < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
1024 04249e04 bus_info_length 4, crc_length 36, crc 40452
1028 31333934 bus_name "1394"
1032 20ff5003 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 5 (64)
1036 0030e002 company_id 0030e0 |
1040 00454647 device_id 8594474567 | EUI-64 13757098081207879
root directory
-----------------------------------------------------------------
1044 00062d69 directory_length 6, crc 11625
1048 030030e0 vendor
1052 8100000a --> descriptor leaf at 1092
1056 1700f970 model
1060 81000011 --> descriptor leaf at 1128
1064 0c0083c0 node capabilities: per IEEE 1394
1068 d1000001 --> unit directory at 1072
unit directory at 1072
-----------------------------------------------------------------
1072 00046ff9 directory_length 4, crc 28665 (should be 43676)
1076 1200a02d specifier id
1080 13010001 version
1084 1700f970 model
1088 8100000f --> descriptor leaf at 1148
descriptor leaf at 1092
-----------------------------------------------------------------
1092 00085f8a leaf_length 8, crc 24458
1096 00000000 textual descriptor
1100 00000000 minimal ASCII
1104 4d69676c "Migl"
1108 69612054 "ia T"
1112 6563686e "echn"
1116 6f6c6f67 "olog"
1120 79204c74 "y Lt"
1124 642e0000 "d."
descriptor leaf at 1128
-----------------------------------------------------------------
1128 00040514 leaf_length 4, crc 1300
1132 00000000 textual descriptor
1136 00000000 minimal ASCII
1140 4f584657 "OXFW"
1144 20393730 " 970"
descriptor leaf at 1148
-----------------------------------------------------------------
1148 0005a1dc leaf_length 5, crc 41436
1152 00000000 textual descriptor
1156 00000000 minimal ASCII
1160 4861726d "Harm"
1164 6f6e7941 "onyA"
1168 7564696f "udio"
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240218074128.95210-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Miglia Harmony Audio (OXFW970) has a quirk to put the number of
accumulated quadlets in CIP payload into the dbc field of CIP header.
This commit handles the quirk in the packet processing layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240218074128.95210-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Miglia Harmony Audio does neither support AV/C Stream Format Information
command nor AV/C Extended Stream Format Information command.
This commit adds a workaround for the case and uses the hard-coded formats.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240218074128.95210-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes relying upon linux/of_platform.h to include
linux/platform_device.h, which it no longer does, thereby fixing
compilation problems like:
In file included from drivers/usb/host/uhci-hcd.c:850:
drivers/usb/host/uhci-grlib.c: In function 'uhci_hcd_grlib_probe':
drivers/usb/host/uhci-grlib.c:92:29: error: invalid use of undefined type 'struct platform_device'
92 | struct device_node *dn = op->dev.of_node;
| ^~
Fixes: ef175b29a2 ("of: Stop circularly including of_device.h and of_platform.h")
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240129075056.1511630-1-andreas@gaisler.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The servers for the @codeaurora domain have long been retired and any
messages sent there will bounce. Fix Odelu's address in the binding to
match the .mailmap entry so that folks see the correct address when
looking at the documentation.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240202181748.4124411-1-quic_jhugo@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
ICSSG1 provides dual Gigabit Ethernet support with proper FW loaded.
The ICSSG1 MII0 (RGMII1) has DP83869 PHY attached to it. The ICSSG1 shares
MII1 (RGMII2) PHY DP83869 with CPSW3g and it's assigned by default to
CPSW3g. The MDIO access to MII1 (RGMII2) PHY DP83869 is controlled by MDIO
bus switch and also assigned to CPSW3g. Therefore the ICSSG1 MII1 (RGMII2)
port is kept disable and ICSSG1 is enabled in single MAC mode by
default.
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240215103036.2825096-3-danishanwar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The ICSSG IP on AM64x SoCs have two Industrial Ethernet Peripherals (IEPs)
to manage/generate Industrial Ethernet functions such as time stamping.
Each IEP sub-module is sourced from an internal clock mux that can be
derived from either of the IP instance's ICSSG_IEP_GCLK or from another
internal ICSSG CORE_CLK mux. Add both the IEP nodes for both the ICSSG
instances. The IEP clock is currently configured to be derived
indirectly from the ICSSG_ICLK running at 250 MHz.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240215103036.2825096-2-danishanwar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add a mechanism for named attribute_groups to hide their directory at
sysfs_update_group() time, or otherwise skip emitting the group
directory when the group is first registered. It piggybacks on
is_visible() in a similar manner as SYSFS_PREALLOC, i.e. special flags
in the upper bits of the returned mode. To use it, specify a symbol
prefix to DEFINE_SYSFS_GROUP_VISIBLE(), and then pass that same prefix
to SYSFS_GROUP_VISIBLE() when assigning the @is_visible() callback:
DEFINE_SYSFS_GROUP_VISIBLE($prefix)
struct attribute_group $prefix_group = {
.name = $name,
.is_visible = SYSFS_GROUP_VISIBLE($prefix),
};
SYSFS_GROUP_VISIBLE() expects a definition of $prefix_group_visible()
and $prefix_attr_visible(), where $prefix_group_visible() just returns
true / false and $prefix_attr_visible() behaves as normal.
The motivation for this capability is to centralize PCI device
authentication in the PCI core with a named sysfs group while keeping
that group hidden for devices and platforms that do not meet the
requirements. In a PCI topology, most devices will not support
authentication, a small subset will support just PCI CMA (Component
Measurement and Authentication), a smaller subset will support PCI CMA +
PCIe IDE (Link Integrity and Encryption), and only next generation
server hosts will start to include a platform TSM (TEE Security
Manager).
Without this capability the alternatives are:
* Check if all attributes are invisible and if so, hide the directory.
Beyond trouble getting this to work [1], this is an ABI change for
scenarios if userspace happens to depend on group visibility absent any
attributes. I.e. this new capability avoids regression since it does
not retroactively apply to existing cases.
* Publish an empty /sys/bus/pci/devices/$pdev/tsm/ directory for all PCI
devices (i.e. for the case when TSM platform support is present, but
device support is absent). Unfortunate that this will be a vestigial
empty directory in the vast majority of cases.
* Reintroduce usage of runtime calls to sysfs_{create,remove}_group()
in the PCI core. Bjorn has already indicated that he does not want to
see any growth of pci_sysfs_init() [2].
* Drop the named group and simulate a directory by prefixing all
TSM-related attributes with "tsm_". Unfortunate to not use the naming
capability of a sysfs group as intended.
In comparison, there is a small potential for regression if for some
reason an @is_visible() callback had dependencies on how many times it
was called. Additionally, it is no longer an error to update a group
that does not have its directory already present, and it is no longer a
WARN() to remove a group that was never visible.
Link: https://lore.kernel.org/all/2024012321-envious-procedure-4a58@gregkh/ [1]
Link: https://lore.kernel.org/linux-pci/20231019200110.GA1410324@bhelgaas/ [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2024013028-deflator-flaring-ec62@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 27c5fd271d ("RDMA/hns: The UD mode can only be configured
with DCQCN") adds a check of congest control alorithm for UD. But
that patch causes a problem: hr_dev->caps.congest_type is global,
used by all QPs, so modifying this field to DCQCN for UD QPs causes
other QPs unable to use any other algorithm except DCQCN.
Revert the modification in commit 27c5fd271d ("RDMA/hns: The UD
mode can only be configured with DCQCN"). Add a new field cong_type
to struct hns_roce_qp and configure DCQCN for UD QPs.
Fixes: 27c5fd271d ("RDMA/hns: The UD mode can only be configured with DCQCN")
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240219061805.668170-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXSbvkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGi3kH/iM5AcKeQfee07to
TJP3WORLBt5UrUMgAQbJdNAruCj6brHA6YnZ6AjdhdNZ41RO06h69kTpb+y/CYJz
+ogGK5qhWsC8ETM6rJCioo8uI4GU70p84fGiMfLw8o6vUvmtyI5qH3531Y30Edxt
qqMVtQrVe9J5JcHQjJ/mQo8nAuvZdQQGM90zLGqFP+JheP3CzsCokraIITqoebDC
PCVAsnSbXT/uMjwSr03kdnMnnY++fxz/TyHb/QRMPq/4xU8nz0Z2hlOOYrVkOINu
lkIYtCDGTk0QR3hdDiO9yt+k1OsWi+oBkrhjAQmAk9x3riiXq1NKvZZLDArt7PH5
gSyo9sE=
=h5Ei
-----END PGP SIGNATURE-----
Merge 6.8-rc5 into driver-core-next
We need the driver core changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move bus-width property to *main.dtsi, above the OTAP/ITAP
delay values. While there is no error with where it is
currently at, it is easier to read the MMC node if the
bus-width property is located above the OTAP/ITAP delay
values consistently across MMC nodes.
Add missing bus-width for MMC2 in k3-am62-main.
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240213235701.2438513-9-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Move ti,clkbuf-sel property above the OTAP/ITAP delay values.
While there is no error with where it is currently at, it is
easier to read the MMC node if ti,clkbuf-sel is located above
the OTAP/ITAP delay values consistently across MMC nodes.
Add missing ti,clkbuf-sel for MMC0 in k3-am64-main.
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240213235701.2438513-8-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Remove DLL properties which are not applicable for soft PHYs
since these PHYs do not have a DLL to enable.
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Verdin AM62
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240213235701.2438513-7-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add OTAP/ITAP values to enable HS400 timing for MMC0 and
SDR104 timing for MMC1/MMC2. Remove no-1-8-v property to
enable the highest speed mode possible.
Update MMC OTAP/ITAP values according to the datasheet
[0], refer to Table 7-79 for MMC0 and Table 7-97 for MMC1/MMC2.
[0] https://www.ti.com/lit/ds/symlink/am62p.pdf
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240213235701.2438513-6-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add support for 32GB eMMC card on AM62A7 SK. Includes adding mmc0
pins settings. Add mmc0 alias for sdhci0 in k3-am62a7-sk.dts.
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240213235701.2438513-4-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Commit 2fb857bc9f ("powerpc/kcsan: Add exclusions from instrumentation")
added KCSAN_SANITIZE_early_64.o to arch/powerpc/kernel/Makefile, while
it does not compile early_64.o.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240216135817.2003106-1-masahiroy@kernel.org
"msi-map-mask" is a required property for all Qcom PCIe controllers as it
would allow all PCIe devices under a bus to share the same MSI identifier.
Without this property, each device has to use a separate MSI identifier
which is not possible due to platform limitations.
Currently, this is not an issue since only one device is connected to the
bus on boards making use of this SoC.
Fixes: a33a532b3b ("arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-sm8550-msi-map-fix-v1-1-b66d83ce48b7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240213145124.342514-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This was not enabled in the matisse-wifi tree. Without this, it is not
possible to use the USB port for serial debugging via a "Carkit debug
cable".
Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240215180322.99089-5-newbyte@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a device tree for the Samsung Galaxy Tab 4 10.1 (SM-T535) LTE tablet
based on the MSM8926 platform.
The common dtsi is also modified to describe the widest constraints,
which required modifications to the matisse-wifi dts.
Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215180322.99089-4-newbyte@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to the dts from the kernel source code released by Samsung,
matissewifi and matisselte only have minor differences in hardware, so
use a shared dtsi to reduce duplicated code. Additionally, this should
make adding support for matisse3g easier should someone want to do that
at a later point.
As such, add a common device tree for all matisse devices by Samsung
based on the matissewifi dts. Support for matisselte will be introduced
in a later patch in this series and will use the common dtsi as well.
Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215180322.99089-2-newbyte@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This documents Samsung Galaxy Tab 4 10.1 LTE (samsung,matisselte)
which is a tablet by Samsung based on the MSM8926 SoC.
Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215180322.99089-3-newbyte@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the compatible for the SAW2 for L2 cache found on MSM8226.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240210-msm8226-cpu-v2-1-5d9cb4c35204@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Only Tx and Rx Signal lines for wkup_uart0 are brought out on
the J784S4 EVM from SoC, but CTS and RTS signal lines are not
brought on the EVM. Thus, remove pinmux for CTS and RTS signal
lines for wkup_uart0 in J784S4.
Fixes: 6fa5d37a2f ("arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-5-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Only Tx and Rx Signal lines for wkup_uart0 are brought out on
the Common Proc Board through SoM, but CTS and RTS signal lines
are not brought on the board. Thus, remove pinmux for CTS and RTS
signal lines for wkup_uart0 in J721S2.
Fixes: f5e9ee0b35 ("arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-4-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
RPi v2 Camera (IMX219) is an 8MP camera that can be used with SK-AM69,
J721E SK, and AM68 SK through the 22-pin CSI-RX connector.
Add a reference overlay for dual IMX219 RPI camera v2 modules
which can be used across AM68 SK, AM69 SK, TDA4VM SK boards
that have a 15/22-pin FFC connector. Also enable build testing
and symbols for all the three platforms.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-10-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J784S4 has three CSI2RX capture subsystem featuring Cadence CSI2RX,
DPHY and TI's pixel grabbing wrapper. Add nodes for the same and
keep them disabled by default. J784S4 uses a dedicated BCDMA instance
for CSI-RX traffic, so enable that as well.
J784S4 TRM (Section 12.7 Camera Subsystem):
https://www.ti.com/lit/zip/spruj52
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-9-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J721S2 has two CSI2RX capture subsystem featuring Cadence CSI2RX,
DPHY and TI's pixel grabbing wrapper. Add nodes for the same and
keep them disabled by default. J721S2 uses a dedicated BCDMA instance
for CSI-RX traffic, so enable that as well.
J721S2 TRM (Section 12.7 Camera Subsystem):
https://www.ti.com/lit/zip/spruj28
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-8-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J721E has two CSI2RX capture subsystem featuring Cadence CSI2RX,
DPHY and TI's pixel grabbing wrapper. Add nodes for the same and
keep them disabled by default.
J721E TRM (Section 12.7 Camera Subsystem):
https://www.ti.com/lit/zip/spruil1
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-7-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J721E SK has the CSI2RX routed to a MIPI CSI connector and to 15-pin
RPi camera connector through an analog mux with GPIO control, model that
so that an overlay can control the mux state according to connected
cameras. Also provide labels to the I2C mux bus instances so that a
generic overlay can be used across multiple platforms.
J721E SK schematics: https://www.ti.com/lit/zip/sprr438
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-6-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
CSI cameras are controlled using I2C. On AM69 Starter Kit, this is routed
to I2C-1, so enable the instance, TCA9543 I2C switch and the TCA6408
GPIO expander on the bus. AM69 SK has the CSI2RX routed to a MIPI CSI
connector and to 22-pin RPi camera connector through an analog mux with
GPIO control, model that so that an overlay can control the mux state
according to connected cameras.
AM69 SK schematics: https://www.ti.com/lit/zip/sprr466
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-5-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
CSI cameras are controlled using I2C. On AM68 Starter Kit, this is routed
to I2C-1, so enable the instance and the TCA9543 I2C switch on the bus.
AM68 SK schematics: https://www.ti.com/lit/zip/sprr463
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-4-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
CSI cameras are controlled using I2C. On J784S4 EVM, this is routed
to I2C-5, so enable the instance and the TCA6408 GPIO expander
on the bus.
J784S4 EVM schematics: https://www.ti.com/lit/zip/sprr458
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-3-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>