Vincent Mailhol <mailhol.vincent@wanadoo.fr> says:
This series is a single patch to replace Wolfgang by myself as the
second maintainer of the CAN drivers subtree.
Link: https://lore.kernel.org/all/20240205111743.920528-1-mailhol.vincent@wanadoo.fr
[mkl: fix typo]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Wolfgang has not been active on the linux-can mailing list other the
last two years, his last activity being on November 2021 [1].
In replacement, I would like to nominate myself (Vincent Mailhol) as
the second maintainer of the CAN drivers subtree.
Wolfgang is already listed in the CREDITS since [2], so despite this
removal, his legacy remains credited.
Thank you for all your contributions!
[1] https://lore.kernel.org/linux-can/?q=f%3AWolfgang+Grandegger
[2] commit 4261a2043f ("can: Update MAINTAINERS and CREDITS file")
Link: https://git.kernel.org/torvalds/c/4261a2043f1b
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240205111743.920528-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Markus Schneider-Pargmann <msp@baylibre.com> says:
The series implements many small and bigger throughput improvements and
adds rx/tx coalescing at the end.
Changes in v7:
- Rebased to v6.8-rc1
- Fixed NULL pointer dereference in m_can_clean() on am62 that happened
when doing ip link up, ip link down, ip link up
- Fixed a racecondition on am62 observed with high throughput tests.
netdev_completed_queue() was called before netdev_sent_queue() as the
interrupt was processed so fast. netdev_sent_queue() is now reported
before the actual sent is done.
- Fixed an initializing issue on am62 where active interrupts are
getting lost between runs. Fixed by resetting cdev->active_interrupts
in m_can_disable_all_interrupts()
- Removed m_can_start_fast_xmit() because of a reordering of operations
due to above mentioned race condition
Changes in v6:
- Rebased to v6.6-rc2
- Added two small changes for the newly integrated polling feature
- Reuse the polling hrtimer for coalescing as the timer used for
coalescing has a similar purpose as the one for polling. Also polling
and coalescing will never be active at the same time.
Changes in v5:
- Add back parenthesis in m_can_set_coalesce(). This will make
checkpatch unhappy but gcc happy.
- Remove unused fifo_header variable in m_can_tx_handler().
- Rebased to v6.5-rc1
Changes in v4:
- Create and use struct m_can_fifo_element in m_can_tx_handler
- Fix memcpy_and_pad to copy the full buffer
- Fixed a few checkpatch warnings
- Change putidx to be unsigned
- Print hard_xmit error only once when TX FIFO is full
Changes in v3:
- Remove parenthesis in error messages
- Use memcpy_and_pad for buffer copy in 'can: m_can: Write transmit
header and data in one transaction'.
- Replace spin_lock with spin_lock_irqsave. I got a report of a
interrupt that was calling start_xmit just after the netqueue was
woken up before the locked region was exited. spin_lock_irqsave should
fix this. I attached the full stack at the end of the mail if someone
wants to know.
- Rebased to v6.3-rc1.
- Removed tcan4x5x patches from this series.
Changes in v2:
- Rebased on v6.2-rc5
- Fixed missing/broken accounting for non peripheral m_can devices.
previous versions:
v1 - https://lore.kernel.org/lkml/20221221152537.751564-1-msp@baylibre.com
v2 - https://lore.kernel.org/lkml/20230125195059.630377-1-msp@baylibre.com
v3 - https://lore.kernel.org/lkml/20230315110546.2518305-1-msp@baylibre.com
v4 - https://lore.kernel.org/lkml/20230621092350.3130866-1-msp@baylibre.com
v5 - https://lore.kernel.org/lkml/20230718075708.958094-1-msp@baylibre.com
v6 - https://lore.kernel.org/lkml/20230929141304.3934380-1-msp@baylibre.com
Link: https://lore.kernel.org/all/20240207093220.2681425-1-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In detail:
In C language, when you perform a multiplication operation, if
both operands are of int type, the multiplication operation is
performed on the int type, and then the result is converted to
the target type. This means that if the product of int type
multiplication exceeds the range that int type can represent,
an overflow will occur even if you store the result in a
variable of int64_t type.
For a multiplication of two int values, it is better to use
mul_u32_u32() rather than s->exit_latency_ns = s->exit_latency *
NSEC_PER_USEC to avoid potential overflow happenning.
Signed-off-by: C Cheng <C.Cheng@mediatek.com>
Signed-off-by: Bo Ye <bo.ye@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For i2c read operation in GSI mode, we are getting timeout
due to malformed TRE basically incorrect TRE sequence
in gpi(drivers/dma/qcom/gpi.c) driver.
I2C driver has geni_i2c_gpi(I2C_WRITE) function which generates GO TRE and
geni_i2c_gpi(I2C_READ)generates DMA TRE. Hence to generate GO TRE before
DMA TRE, we should move geni_i2c_gpi(I2C_WRITE) before
geni_i2c_gpi(I2C_READ) inside the I2C GSI mode transfer function
i.e. geni_i2c_gpi_xfer().
TRE stands for Transfer Ring Element - which is basically an element with
size of 4 words. It contains all information like slave address,
clk divider, dma address value data size etc).
Mainly we have 3 TREs(Config, GO and DMA tre).
- CONFIG TRE : consists of internal register configuration which is
required before start of the transfer.
- DMA TRE : contains DDR/Memory address, called as DMA descriptor.
- GO TRE : contains Transfer directions, slave ID, Delay flags, Length
of the transfer.
I2c driver calls GPI driver API to config each TRE depending on the
protocol.
For read operation tre sequence will be as below which is not aligned
to hardware programming guide.
- CONFIG tre
- DMA tre
- GO tre
As per Qualcomm's internal Hardware Programming Guide, we should configure
TREs in below sequence for any RX only transfer.
- CONFIG tre
- GO tre
- DMA tre
Fixes: d8703554f4 ("i2c: qcom-geni: Add support for GPI DMA")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5165-rb5
Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7)
needs a quirk entry for the internal microphone to function.
Signed-off-by: Attila Tőkés <attitokes@gmail.com>
Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
m_can supports submitting multiple transmits with one register write.
This is an interesting option to reduce the number of SPI transfers for
peripheral chips.
The m_can_tx_op is extended with a bool that signals if it is the last
transmission and the submit should be executed immediately.
The worker then writes the skb to the FIFO and submits it only if the
submit bool is set. If it isn't set, the worker will write the next skb
which is waiting in the workqueue to the FIFO, etc.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-15-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The network queue is currently always stopped in start_xmit and
continued in the interrupt handler. This is not possible anymore if we
want to keep multiple transmits in flight in parallel.
Use the previously introduced tx_fifo_in_flight counter to control the
network queue instead. This has the benefit of not needing to ask the
hardware about fifo status.
This patch stops the network queue in start_xmit if the number of
transmits in flight reaches the size of the fifo and wakes up the queue
from the interrupt handler once the transmits in flight drops below the
fifo size. This means any skbs over the limit will be rejected
immediately in start_xmit (it shouldn't be possible at all to reach that
state anyways).
The maximum number of transmits in flight is the size of the fifo.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-13-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Keep track of the number of transmits in flight.
This patch prepares the driver to control the network interface queue
based on this counter. By itself this counter be
implemented with an atomic, but as we need to do other things in the
critical sections later I am using a spinlock instead.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-12-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The current implementation uses the workqueue for peripheral chips to
submit work. Only a single work item is queued and used at any time.
To be able to keep more than one transmit in flight at a time, prepare
the workqueue to support multiple transmits at the same time.
Each work item now has a separate storage for a skb and a pointer to
cdev. This assures that each workitem can be processed individually.
The workqueue is replaced by an ordered workqueue which makes sure that
only a single worker processes the items queued on the workqueue. Also
items are ordered by the order they were enqueued. This removes most of
the concurrency the workqueue normally offers. It is not necessary for
this driver.
The cleanup functions have to be adopted a bit to handle this new
mechanism.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-11-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
m_can_tx_handler is the only place where data is written to the tx fifo.
We can calculate the putidx in the driver code here to avoid the
dependency on the txfqs register.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-10-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
putidx is not an integer normally, it is an unsigned field used in
hardware registers. Use a u32 for it.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-9-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add TX support to get/set functions for ethtool coalescing.
tx-frames-irq and tx-usecs-irq can only be set/unset together.
tx-frames-irq needs to be less than TXE and TXB.
As rx and tx share the same timer, rx-usecs-irq and tx-usecs-irq can be
enabled/disabled individually but they need to have the same value if
enabled.
Polling is excluded from TX irq coalescing.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-8-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add the possibility to set coalescing parameters with ethtool.
rx-frames-irq and rx-usecs-irq can only be set and unset together as the
implemented mechanism would not work otherwise. rx-frames-irq can't be
greater than the RX FIFO size.
Also all values can only be changed if the chip is not active.
Polling is excluded from irq coalescing support.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-7-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Extend the coalescing implementation for transmits.
In normal mode the chip raises an interrupt for every finished transmit.
This implementation switches to coalescing mode as soon as an interrupt
handled a transmit. For coalescing the watermark level interrupt is used
to interrupt exactly after x frames were sent. It switches back into
normal mode once there was an interrupt with no finished transmit and
the timer being inactive.
The timer is shared with receive coalescing. The time for receive and
transmit coalescing timers have to be the same for that to work. The
benefit is to have only a single running timer.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-6-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
m_can offers the possibility to set an interrupt on reaching a watermark
level in the receive FIFO. This can be used to implement coalescing.
Unfortunately there is no hardware timeout available to trigger an
interrupt if only a few messages were received within a given time. To
solve this I am using a hrtimer to wake up the irq thread after x
microseconds.
The timer is always started if receive coalescing is enabled and new
received frames were available during an interrupt. The timer is stopped
if during a interrupt handling no new data was available.
If the timer is started the new item interrupt is disabled and the
watermark interrupt takes over. If the timer is not started again, the
new item interrupt is enabled again, notifying the handler about every
new item received.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-5-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Combine header and data before writing to the transmit fifo to reduce
the overhead for peripheral chips.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-4-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The hrtimer_init() is called in m_can_plat_probe() and the hrtimer
function is set in m_can_class_register(). For readability it is better
to keep these two together in m_can_class_register().
Cc: Judith Mendez <jm@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-3-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Interrupts are enabled/disabled in more places than just m_can_start()
and m_can_stop(). Couple the polling timer with enabling/disabling of
all interrupts to achieve equivalent behavior.
Cc: Judith Mendez <jm@ti.com>
Fixes: b382380c0d ("can: m_can: Add hrtimer to generate software interrupt")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stefan Mätje <stefan.maetje@esd.eu> says:
The purpose of this patch is to introduce a new CAN driver to support
the esd GmbH 402 family of CAN interface boards. The hardware design
is based on a CAN controller implemented in a FPGA attached to a
PCIe link.
More information on these boards can be found following the links
included in the commit message.
This patch supports all boards but will operate the CAN-FD capable
boards only in Classic-CAN mode. The CAN-FD support will be added
when the initial patch has stabilized.
The patch is reuses the previous work of my former colleague:
Link: https://lore.kernel.org/linux-can/1426592308-23817-1-git-send-email-thomas.koerper@esd.eu
The patch is based on the linux-can-next main branch.
Changed in v11:
No functional, only editorial changes due to feedback on v10.
- Make lifetime of macros used for hardware timestamp calculation
very short by #undef-ing them after use.
- Fixed insertion order of new entry in MAINTAINERS file.
Changed in v10:
Most changes due to feedback by Vincent Mailhol
https://lore.kernel.org/linux-can/CAMZ6RqLOAC930GNOU+pWuoi6FgYwFOuFrSyAzVjvE2fuVgy8oA@mail.gmail.com
- Add support for ethtool operations by using default operations
provided by the can_dev module for drivers with hardware time
stamp support.
- Factor out core unregistration into pci402_unregister_core().
- Factor out getting next TX fifo index into acc_tx_fifo_next().
- Stop counting alloc_can_err_skb() failures in rx_dropped statistic.
- Add CAN_ERR_CNT flag in CAN error frames as needed.
- Rework function acc_reset_fpga(). To clear I^2C bus enable bit
is not necessary after FPGA reset.
- Simplify struct acc_bmmsg_rxtxdone layout.
- Additional non functional changes due to feedback by Vincent
- Some spelling corrections: ESDACC -> esdACC
Changes in v9:
- Fix returning success error code in case of allocation failure in
pci402_probe().
Changes in v8:
- Rebased to 6.6-rc2 on linux-can-next branch main
Changes in v7:
- Numerous changes. Find the quoted with inline comments about changes
below after the changes list. Stuff that I don't understand and
where I have questions is marked with ????.
Unfortunately I will be AFK till 28th of November.
Changes in v6:
- Fixed the statistic handling of RX overrun errors and increase
net_device_stats::rx_errors instead of net_device_stats::rx_dropped.
- Added a patch to not increase rx statistics when generating a CAN
rx error message frame as suggested on the linux-can list.
- Added a patch to not not increase rx_bytes statistics for RTR frames
as suggested on the linux-can list.
The last two patches change the statistics handling from the previous
style used in other drivers to the newly suggested one.
Changes in v5:
- Added the initialization for netdev::dev_port as it is implemented
for another CAN driver. See
https://lore.kernel.org/linux-can/20211026180553.1953189-1-mailhol.vincent@wanadoo.fr
Changes in v4:
- Fixed the build failure on ARCH=arm64 that was found by the Intel
kernel test robot. See
https://lore.kernel.org/linux-can/202109120608.7ZbQXkRh-lkp@intel.com
Removed error monitoring code that used GCC's built-in compiler
functions for atomic access (__sync_* functions). GCC versions
after 9 (tested with "gcc-10 (Ubuntu 10.3.0-1ubuntu1~20.04)")
don't implement the intrinsic atomic as in-line code but call
"__aarch64_ldadd4_acq_rel" on arm64. This GCC support function
is not exported by the kernel and therefore the module build
post-processing fails.
Removed that code because the error monitoring never showed a
problem during the development this year.
Changes in v3:
- Rework the bus-off restart logic in acc_set_mode() and
handle_core_msg_errstatechange() to call netif_wake_queue() from the
error active event.
- Changed pci402_init_card() to allocate a variable sized array of
struct acc_core using devm_kcalloc() instead of using a fixed size
array in struct pci402_card.
- Changed handle_core_msg_txabort() to release aborted TX frames in
TX FIFO order.
- Fixed the acc_close() function to abort all pending TX request in
esdACC controller.
- Fixed counting of transmit aborts in handle_core_msg_txabort().
It is now done like in can_flush_echo_skb().
- Fixed handle_core_msg_buserr() to create error frames including the
CAN RX and TX error counters that were missing.
- Fixed acc_set_bittiming() neither to touch LOM mode setting of
esdACC controller nor to enter or leave RESET mode.
The esdACC controller is going active on the CAN bus in acc_open()
and is going inactive (RESET mode) again in acc_close().
- Rely on the automatic release of memory fetched by devm_kzalloc().
But still use devm_irq_free() explicitely to make sure that the
interrupt handler is disconnected at that point.
This avoids a possible crash in non-MSI mode due to the IRQ
triggered by another device on the same PCI IRQ line.
- Changed to use DMA map API instead of pci_*_consistent compatibility
wrappers.
- Fixed stale email references and updated copyright information.
- Removed any traces of future CAN-FD support.
Changes in v2:
- Avoid warning triggered by -Wshift-count-overflow on architectures
with 32-bit dma_addr_t.
- Fixed Makefile not to build the kernel module always. Doing this
renamed esd402_pci.c to esd_402_pci-core.c as recommended by Marc.
previous versions:
v1 - https://lore.kernel.org/linux-can/20210728203647.15240-1-Stefan.Maetje@esd.eu
v2 - https://lore.kernel.org/linux-can/20210730173805.3926-1-Stefan.Maetje@esd.eu
v3 - https://lore.kernel.org/linux-can/20210908164640.23243-1-stefan.maetje@esd.eu
v4 - https://lore.kernel.org/linux-can/20210916172152.5127-1-stefan.maetje@esd.eu
v5 - https://lore.kernel.org/linux-can/20211109155326.2608822-1-stefan.maetje@esd.eu
v6 - https://lore.kernel.org/linux-can/20211201220328.3079270-1-stefan.maetje@esd.eu
v7 - https://lore.kernel.org/linux-can/20221106224156.3619334-1-stefan.maetje@esd.eu
v8 - https://lore.kernel.org/linux-can/20231025141635.1459606-1-stefan.maetje@esd.eu
v9 - https://lore.kernel.org/linux-can/20231107184103.2802678-1-stefan.maetje@esd.eu
v10 - https://lore.kernel.org/linux-can/20231120175657.4070921-1-stefan.maetje@esd.eu
Link: https://lore.kernel.org/all/20231122160211.2110448-1-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds support for the PCI based PCIe/402 CAN interface family
from esd GmbH that is available with various form factors
(https://esd.eu/en/products/402-series-can-interfaces).
All boards utilize a FPGA based CAN controller solution developed
by esd (esdACC). For more information on the esdACC see
https://esd.eu/en/products/esdacc.
This driver detects all available CAN interface board variants of
the family but atm. operates the CAN-FD capable devices in
Classic-CAN mode only! A later patch will introduce the CAN-FD
functionality in this driver.
Co-developed-by: Thomas Körper <thomas.koerper@esd.eu>
Signed-off-by: Thomas Körper <thomas.koerper@esd.eu>
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20231122160211.2110448-3-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Adding myself (Stefan Mätje) as a maintainer for the upcoming driver of
the PCIe/402 interface card family.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20231122160211.2110448-2-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add __pm_runtime_put_autosuspend() that replaces
pm_runtime_put_autosuspend() for new users. The intent is to later
re-purpose pm_runtime_put_autosuspend() to also mark the device's last
busy stamp---which is what the vast majority of users actually need.
This is also described in pm_runtime_put_autosuspend() documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two ways to opportunistically increment a device's runtime PM
usage count, calling either pm_runtime_get_if_active() or
pm_runtime_get_if_in_use(). The former has an argument to tell whether to
ignore the usage count or not, and the latter simply calls the former with
ign_usage_count set to false. The other users that want to ignore the
usage_count will have to explicitly set that argument to true which is a
bit cumbersome.
To make this function more practical to use, remove the ign_usage_count
argument from the function. The main implementation is in a static
function called pm_runtime_get_conditional() and implementations of
pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to
runtime.c.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound/
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ISO15765-2 standard supports to take the PDUs communication parameters
blocksize (BS) and Separation Time minimum (STmin) either from the first
received flow control (FC) "static" or from every received FC "dynamic".
Add a new CAN_ISOTP_DYN_FC_PARMS flag to support dynamic FC parameters.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20231208165729.3011-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
CAN RAW sockets allow userspace to tell if a received CAN frame comes
from the same socket, another socket on the same host, or another host.
See commit 1e55659ce6 ("can-raw: add msg_flags to distinguish local
traffic"). However, this feature is missing in CAN BCM sockets.
Add the same feature to CAN BCM sockets. When reading a received frame
(opcode RX_CHANGED) using recvmsg, two flags in msg->msg_flags may be
set following the previous convention (from CAN RAW), to distinguish
between 'own', 'local' and 'remote' CAN traffic.
Update the documentation to reflect this change.
Signed-off-by: Nicolas Maier <nicolas.maier.dev@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20240120081018.2319-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
10ms is too high for today's hardware, even low end ones. This default
end up being used a lot on Arm machines at least. Pine64, mac mini and
pixel 6 all end up with 10ms rate_limit_us when using schedutil, and
it's too high for all of them.
Change the default to 2ms which should be 'pessimistic' enough for worst
case scenario, but not too high for platforms with fast DVFS hardware.
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
NVM command set 1.0 (or later) mandates PI to be in the last bytes of
metadata. But this was not supported in the block-layer, and driver
registered a nop profile.
Since block-integrity can now handle flexible PI offset, change the
driver to support this configuration.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240201130126.211402-4-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block layer integrity processing assumes that protection information
(PI) is placed in the first bytes of each metadata block.
Remove this limitation and include the metadata before the PI in the
calculation of the guard tag.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Chinmay Gameti <c.gameti@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240201130126.211402-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow computation using the existing guard value.
This is a prep patch.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240201130126.211402-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that all callers pass in GFP_KERNEL to blkdev_zone_mgmt() and use
memalloc_no{io,fs}_{save,restore}() to define the allocation scope, we can
drop the gfp_mask parameter from blkdev_zone_mgmt() as well as
blkdev_zone_reset_all() and blkdev_zone_reset_all_emulated().
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240128-zonefs_nofs-v3-5-ae3b7c8def61@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Guard the calls to blkdev_zone_mgmt() with a memalloc_nofs scope.
This helps us getting rid of the GFP_NOFS argument to blkdev_zone_mgmt();
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240128-zonefs_nofs-v3-4-ae3b7c8def61@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a memalloc_nofs scope around all calls to blkdev_zone_mgmt(). This
allows us to further get rid of the GFP_NOFS argument for
blkdev_zone_mgmt().
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20240128-zonefs_nofs-v3-3-ae3b7c8def61@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Guard the calls to blkdev_zone_mgmt() with a memalloc_noio scope.
This helps us getting rid of the GFP_NOIO argument to blkdev_zone_mgmt();
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240128-zonefs_nofs-v3-2-ae3b7c8def61@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass GFP_KERNEL instead of GFP_NOFS to the blkdev_zone_mgmt() call in
zonefs_zone_mgmt().
As as zonefs_zone_mgmt() and zonefs_inode_zone_mgmt() are never called
from a place that can recurse back into the filesystem on memory reclaim,
it is save to call blkdev_zone_mgmt() with GFP_KERNEL.
Link: https://lore.kernel.org/all/ZZcgXI46AinlcBDP@casper.infradead.org/
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240128-zonefs_nofs-v3-1-ae3b7c8def61@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the function amd_pstate_adjust_perf(), the 'min_perf' variable is set
to 'highest_perf' instead of 'lowest_perf'.
Fixes: 1d215f0319 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since WiFi 7 is expected to support MLO, so we should enable MAC-0/1 and
PHY-0/1. By default, set dbcc_en=true, change quota to DBCC mode, and set
MLO mode to 2 + 0 that means we only use 2x2 connection on MAC/PHY-0
for now.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-12-pkshih@realtek.com
Reference the current quota mode to avoid misleading warnings.
This patch is required after supporting DBCC quota mode.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-11-pkshih@realtek.com
Modify reg for BE generation when AP stop, otherwise have warning
messages "Polling beacon packet empty fail".
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-10-pkshih@realtek.com
ctrl_nbtg_bt_tx is used to control AGC settings under non-shared path
condition, which is affected by BT TX. To speed up IO, merge continual
bit mask into one IO. Also, correct a register definition.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-9-pkshih@realtek.com
When there are OBSS that cannot interpret 26-tone RU transmissions,
we should disable 26-tone RU HE TB PPDU transmissions. So, add registers
accordingly.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-8-pkshih@realtek.com
Hardware can use spatial reuse to reduce interference in OBSS environment,
and originally use MAC header to match BSS color and AID. Change to use
PLCP to match them earlier to prevent margin timing.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-7-pkshih@realtek.com
Consider mac_idx as an argument to set this register to disable QoS NULL
update MUEDCA timer.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-5-pkshih@realtek.com
DLE (data link engine) could hold quota when we are going to enable/disable
MAC-1 block, so trigger hardware to return all held quota.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-4-pkshih@realtek.com
We are going to support MLO/DBCC, so need to load parameter table to
PHY-1 as well.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-3-pkshih@realtek.com
PHY-1 can be seen as a copy of PHY-0, and the difference is their base
register address, so add a function to get offset to access PHY-1.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-2-pkshih@realtek.com