Commit graph

1,294,499 commits

Author SHA1 Message Date
Linus Walleij
2719a9e715 wifi: cw1200: Convert to GPIO descriptors
The CW1200 uses two GPIOs to control the powerup and reset
pins, get these from GPIO descriptors instead of being passed
as platform data from boardfiles.

The RESET line will need to be marked as active low as we will
let gpiolib handle the polarity inversion.

The SDIO case is a bit special since the "card" need to be
powered up before it gets detected on the SDIO bus and
properly probed. Fix this by using board-specific GPIOs
assigned to device "NULL".

There are currently no in-tree users.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-6-e1c7c5d68746@linaro.org
2024-02-05 20:17:10 +02:00
Linus Walleij
d8da5a2138 wifi: plfxlc: Drop unused include
The driver includes the legacy GPIO header <linux/gpio.h>
but does not use any symbols from it. Drop the include.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-5-e1c7c5d68746@linaro.org
2024-02-05 20:17:10 +02:00
Linus Walleij
163857d995 wifi: mwifiex: Drop unused headers
The mwifiex driver include two legacy GPIO headers but does
not use symbols from any of them.

The driver does contain some "gpio" handling code, but this
is some custom GPIO interface, not the Linux GPIO.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-4-e1c7c5d68746@linaro.org
2024-02-05 20:17:10 +02:00
Linus Walleij
b303de763b wifi: brcmsmac: Drop legacy header
The driver is using all the modern abstractions to obtain and use
GPIOs and the legacy <linux/gpio.h> header is unused, so drop it.

Fixes: a8e59744e1 ("gpiolib: split linux/gpio/driver.h out of linux/gpio.h")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-3-e1c7c5d68746@linaro.org
2024-02-05 20:17:10 +02:00
Linus Walleij
04e9c8af8b wifi: ti: wlcore: sdio: Drop unused include
The file is including the legacy GPIO header <linux/gpio.h> but
is not using any symbols from it, drop the header.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240131-descriptors-wireless-v1-2-e1c7c5d68746@linaro.org
2024-02-05 20:17:09 +02:00
Kalle Valo
7ceade6534 wifi: cw1200: fix __le16 sparse warnings
Sparse warns:

drivers/net/wireless/st/cw1200/cw1200_spi.c:83:17:    got restricted __le16 [usertype]
drivers/net/wireless/st/cw1200/cw1200_spi.c:148:17: warning: incorrect type in assignment (different base types)
drivers/net/wireless/st/cw1200/cw1200_spi.c:148:17:    expected unsigned short [addressable] [assigned] [usertype] regaddr
drivers/net/wireless/st/cw1200/cw1200_spi.c:148:17:    got restricted __le16 [usertype]

These cpu_to_le16() calls are not really making any sense to me. On a big
endian system we first convert regaddr from big to little using cpu_to_le16()
but immediately after we convert them back to big endian? So just remove them.

Compile tested only.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240130151556.2315951-4-kvalo@kernel.org
2024-02-05 20:16:29 +02:00
Kalle Valo
0583e5acaf wifi: rsi: fix restricted __le32 degrades to integer sparse warnings
drivers/net/wireless/rsi/rsi_91x_usb.c:235:27: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:236:27: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:237:27: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:238:27: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:244:36: warning: restricted __le32 degrades to integer
drivers/net/wireless/rsi/rsi_91x_usb.c:245:35: warning: restricted __le32 degrades to integer

These cpu_to_le32() are not making sense. With usb_reg_buf we handle the values
byte at a time to make sure usb_reg_buf is in little endian so no need to
convert anything. And usb_control_msg() expects to have the values in native
endian anyway. So just remove these so they are not spamming our logs.

Compile tested only.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240130151556.2315951-3-kvalo@kernel.org
2024-02-05 20:16:29 +02:00
Kalle Valo
2b59c9c30b wifi: zd1211rw: remove __nocast from zd_addr_t
Sparse warns:

drivers/net/wireless/zydas/zd1211rw/zd_usb.c:383:24: warning: implicit cast from nocast type
drivers/net/wireless/zydas/zd1211rw/zd_usb.c:419:24: warning: implicit cast from nocast type

This is an ancient driver which has not have any meaningfuli changes for a long
time and hopefully removed soon. So just remove the __nocast to get rid of the
sparse warnings.

Compile tested only.

Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240130151556.2315951-2-kvalo@kernel.org
2024-02-05 20:16:28 +02:00
Chun Qiu
1209f487d4 wifi: rtl8xxxu: Add TP-Link TL-WN823N V2
TP-Link TL-WN823N V2 (2357:0135) is based on rtl8192fu and has been
tested to work with the rtl8xxxu driver.

Signed-off-by: Chun Qiu <cqca@cock.lu>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240129053030.16369-1-cqca@cock.lu
2024-02-05 20:15:52 +02:00
Zhipeng Lu
5f0e4aede0 wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()
In the for statement of lbs_allocate_cmd_buffer(), if the allocation of
cmdarray[i].cmdbuf fails, both cmdarray and cmdarray[i].cmdbuf needs to
be freed. Otherwise, there will be memleaks in lbs_allocate_cmd_buffer().

Fixes: 876c9d3aeb ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126075336.2825608-1-alexious@zju.edu.cn
2024-02-05 20:15:27 +02:00
Felix Fietkau
0647903efb wifi: mt76: mt7996: fix fortify warning
Copy cck and ofdm separately in order to avoid __read_overflow2_field
warning.

Fixes: f75e4779d2 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240203132446.54790-1-nbd@nbd.name
2024-02-05 20:00:45 +02:00
Waiman Long
8eb17dc1a6 workqueue: Skip __WQ_DESTROYING workqueues when updating global unbound cpumask
Skip updating workqueues with __WQ_DESTROYING bit set when updating
global unbound cpumask to avoid unnecessary work and other complications.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2024-02-05 07:52:22 -10:00
Wang Jinchao
96068b6030 workqueue: fix a typo in comment
There should be three, fix it.

Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2024-02-05 07:48:25 -10:00
Timur Tabi
34e659f34a drm/nouveau: nvkm_gsp_radix3_sg() should use nvkm_gsp_mem_ctor()
Function nvkm_gsp_radix3_sg() uses nvkm_gsp_mem objects to allocate the
radix3 tables, but it unnecessarily creates those objects manually
instead of using the standard nvkm_gsp_mem_ctor() function like the
rest of the code does.

Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202230608.1981026-2-ttabi@nvidia.com
2024-02-05 18:41:09 +01:00
Thorsten Blum
f9197538d7 Documentation: admin-guide: tainted-kernels.rst: Add missing article and comma
- Add missing article "the"
- s/above example/example above/
- Add missing comma after introductory clause to improve readability

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240205132409.1957-1-thorsten.blum@toblux.com
2024-02-05 10:25:58 -07:00
Timur Tabi
042b5f8384 drm/nouveau: fix several DMA buffer leaks
Nouveau manages GSP-RM DMA buffers with nvkm_gsp_mem objects.  Several of
these buffers are never dealloced.  Some of them can be deallocated
right after GSP-RM is initialized, but the rest need to stay until the
driver unloads.

Also futher bullet-proof these objects by poisoning the buffer and
clearing the nvkm_gsp_mem object when it is deallocated.  Poisoning
the buffer should trigger an error (or crash) from GSP-RM if it tries
to access the buffer after we've deallocated it, because we were wrong
about when it is safe to deallocate.

Finally, change the mem->size field to a size_t because that's the same
type that dma_alloc_coherent expects.

Cc: <stable@vger.kernel.org> # v6.7
Fixes: 176fdcbddf ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202230608.1981026-1-ttabi@nvidia.com
2024-02-05 18:25:13 +01:00
Thorsten Blum
40be2369dc Documentation: multiple .rst files: Fix grammar and more consistent formatting
sphinx.rst:
- Remove unnecessary newline
- Fix grammar s/on/in/
- Fix grammar s/check/checks/
- Capitalize heading "The C domain"

changes.rst:
- Remove colon after "pahole" to be consistent with other entries

howto.rst:
- Fix grammar s/you will/will you/
- Hyphenate "real-world problems"

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240205000117.3285-1-thorsten.blum@toblux.com
2024-02-05 10:24:54 -07:00
Thorsten Blum
185ea7676e Documentation: coding-style: Update syntax highlighting for code-blocks
Use c and elisp instead of none in code-blocks

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240203223926.5077-1-thorsten.blum@toblux.com
2024-02-05 10:21:50 -07:00
Guilherme G. Piccoli
3e3ede49ce docs: Document possible_cpus parameter
The number of possible CPUs is set be kernel in early boot time through
some discovery mechanisms, like ACPI in x86. We have a parameter both
in x86 and S390 to override that - there are some cases of BIOSes exposing
more possible CPUs than the available ones, so this parameter is a good
testing mechanism, but for some reason wasn't mentioned so far in the
kernel parameters guide - let's fix that.

Cc: Changwoo Min <changwoo@igalia.com>
Signed-off-by: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240203152208.1461293-1-gpiccoli@igalia.com
2024-02-05 10:21:08 -07:00
Tejun Heo
4f19b8e01e Revert "workqueue: make wq_subsys const"
This reverts commit d412ace111. This leads to
build failures as it depends on a driver-core commit 32f78abe59 ("driver
core: bus: constantify subsys_register() calls"). Let's drop it from wq tree
and route it through driver-core tree.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402051505.kM9Rr3CJ-lkp@intel.com/
2024-02-05 07:19:54 -10:00
Tang Yizhou
3bca7640b4 blk-throttle: Eliminate redundant checks for data direction
After calling throtl_peek_queued(), the data direction can be determined so
there is no need to call bio_data_dir() to check the direction again.

Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240123081248.3752878-1-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05 10:16:12 -07:00
Thorsten Blum
932be49b71 Documentation: coding-style: Fix indentation in code-blocks
- Remove spaces in C code-blocks to align error labels consistently
- Replace tab characters with spaces in emacs-lisp code blocks

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240202231316.7606-1-thorsten.blum@toblux.com
2024-02-05 10:15:31 -07:00
Jens Axboe
06b23f92af block: update cached timestamp post schedule/preemption
Mark the task as having a cached timestamp when set assign it, so we
can efficiently check if it needs updating post being scheduled back in.
This covers both the actual schedule out case, which would've flushed
the plug, and the preemption case which doesn't touch the plugged
requests (for many reasons, one of them being then we'd need to have
preemption disabled around plug state manipulation).

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05 10:07:34 -07:00
Jens Axboe
da4c8c3d09 block: cache current nsec time in struct blk_plug
Querying the current time is the most costly thing we do in the block
layer per IO, and depending on kernel config settings, we may do it
many times per IO.

None of the callers actually need nsec granularity. Take advantage of
that by caching the current time in the plug, with the assumption here
being that any time checking will be temporally close enough that the
slight loss of precision doesn't matter.

If the block plug gets flushed, eg on preempt or schedule out, then
we invalidate the cached clock.

On a basic peak IOPS test case with iostats enabled, this changes
the performance from:

IOPS=108.41M, BW=52.93GiB/s, IOS/call=31/31
IOPS=108.43M, BW=52.94GiB/s, IOS/call=32/32
IOPS=108.29M, BW=52.88GiB/s, IOS/call=31/32
IOPS=108.35M, BW=52.91GiB/s, IOS/call=32/32
IOPS=108.42M, BW=52.94GiB/s, IOS/call=31/31
IOPS=108.40M, BW=52.93GiB/s, IOS/call=32/32
IOPS=108.31M, BW=52.89GiB/s, IOS/call=32/31

to

IOPS=118.79M, BW=58.00GiB/s, IOS/call=31/32
IOPS=118.62M, BW=57.92GiB/s, IOS/call=31/31
IOPS=118.80M, BW=58.01GiB/s, IOS/call=32/31
IOPS=118.78M, BW=58.00GiB/s, IOS/call=32/32
IOPS=118.69M, BW=57.95GiB/s, IOS/call=32/31
IOPS=118.62M, BW=57.92GiB/s, IOS/call=32/31
IOPS=118.63M, BW=57.92GiB/s, IOS/call=31/32

which is more than a 9% improvement in performance. Looking at perf diff,
we can see a huge reduction in time overhead:

    10.55%     -9.88%  [kernel.vmlinux]  [k] read_tsc
     1.31%     -1.22%  [kernel.vmlinux]  [k] ktime_get

Note that since this relies on blk_plug for the caching, it's only
applicable to the issue side. But this is where most of the time calls
happen anyway. On the completion side, cached time stamping is done with
struct io_comp patch, as long as the driver supports it.

It's also worth noting that the above testing doesn't enable any of the
higher cost CPU items on the block layer side, like wbt, cgroups,
iocost, etc, which all would add additional time querying and hence
overhead. IOW, results would likely look even better in comparison with
those enabled, as distros would do.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05 10:07:28 -07:00
Jens Axboe
08420cf70c block: add blk_time_get_ns() and blk_time_get() helpers
Convert any user of ktime_get_ns() to use blk_time_get_ns(), and
ktime_get() to blk_time_get(), so we have a unified API for querying the
current time in nanoseconds or as ktime.

No functional changes intended, this patch just wraps ktime_get_ns()
and ktime_get() with a block helper.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05 10:07:22 -07:00
Jens Axboe
c4e47bbb00 block: move cgroup time handling code into blk.h
In preparation for moving time keeping into blk.h, move the cgroup
related code for timestamps in here too. This will help avoid a circular
dependency, and also moves it into a more appropriate header as this one
is private to the block layer code.

Leave struct bio_issue in blk_types.h as it's a proper time definition.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05 10:07:17 -07:00
Christoph Hellwig
72e84e909e blk-mq: special case cached requests less
Share the main merge / split / integrity preparation code between the
cached request vs newly allocated request cases, and add comments
explaining the cached request handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05 10:06:53 -07:00
Krzysztof Kozlowski
d74029f6c2 docs: maintainer: add existing SoC and netdev profiles
Extend the list of maintainer profiles with SoC and netdev.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240131125351.123509-1-krzysztof.kozlowski@linaro.org
2024-02-05 10:05:57 -07:00
Christoph Hellwig
337e89feb7 blk-mq: introduce a blk_mq_peek_cached_request helper
Add a new helper to check if there is suitable cached request in
blk_mq_submit_bio.  This removes open coded logic in blk_mq_submit_bio
and moves some checks that so far are in blk_mq_use_cached_rq to
be performed earlier.  This avoids the case where we first do check
with the cached request but then later end up allocating a new one
anyway and need to grab a queue reference.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05 10:05:16 -07:00
Christoph Hellwig
0f299da55a blk-mq: move blk_mq_attempt_bio_merge out blk_mq_get_new_requests
blk_mq_attempt_bio_merge has nothing to do with allocating a new
request, it avoids allocating a new request.  Move the call out of
blk_mq_get_new_requests and into the only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240124092658.2258309-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-05 10:03:51 -07:00
Baochen Qiang
b82fb7ef69 wifi: ath11k: initialize eirp_power before use
Currently, at the end of ath11k_mac_fill_reg_tpc_info(), the
reg_tpc_info struct is populated, including the following:
	reg_tpc_info->is_psd_power = is_psd_power;
	reg_tpc_info->eirp_power = eirp_power;

Kernel test robot complains on uninitialized symbol:
drivers/net/wireless/ath/ath11k/mac.c:7949
ath11k_mac_fill_reg_tpc_info() error: uninitialized symbol 'eirp_power'.

This is because there are some code paths that never set eirp_power, so
the assignment of reg_tpc_info->eirp_power can come from an
uninitialized variable. Functionally this is OK since the eirp_power
only has meaning when is_psd_power is true, and all code paths which set
is_psd_power to true also set eirp_power. However, to keep the robot
happy, always initialize eirp_power before use.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: 92425f788f ("wifi: ath11k: fill parameters for vdev set tpc power WMI command")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401311243.NyXwWZxP-lkp@intel.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240202024011.11341-1-quic_bqiang@quicinc.com
2024-02-05 19:00:51 +02:00
Baochen Qiang
b802e7b7e7 wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before use
Currently in ath11k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160
are used to calculate max_nss, see
	if (support_160)
		max_nss = min(rx_mcs_80, rx_mcs_160);
	else
		max_nss = rx_mcs_80;

Kernel test robot complains on uninitialized symbols:
drivers/net/wireless/ath/ath11k/mac.c:2321 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'.
drivers/net/wireless/ath/ath11k/mac.c:2321 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'.
drivers/net/wireless/ath/ath11k/mac.c:2323 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'.

This is because there are some code paths that never set them, so
the assignment of max_nss can come from uninitialized variables.
This could result in some unknown issues since a wrong peer_nss
might be passed to firmware.

Change to initialize them to an invalid value at the beginning. This
makes sense because even max_nss gets an invalid value, due to either
or both of them being invalid, we can get an valid peer_nss with
following guard:
	arg->peer_nss = min(sta->deflink.rx_nss, max_nss)

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: 3db26ecf71 ("ath11k: calculate the correct NSS of peer for HE capabilities")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401311243.NyXwWZxP-lkp@intel.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240202023547.11141-1-quic_bqiang@quicinc.com
2024-02-05 19:00:19 +02:00
Baochen Qiang
54ca3308a2 wifi: ath12k: enable 802.11 power save mode in station mode
To reduce power consumption enable 802.11 power save mode in
station mode. This allows both radio and CPU to sleep more.

Only enable the mode on WCN7850, other chips don't support it
for now.

To test that power save mode is running, run below command and
check there is no NULL Data frame seen by a sniffer:
        iw dev <inf> set power_save off

And run below command, then check there is a NULL Data frame
in sniffer:
        iw dev <inf> set power_save on

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240201035830.2534-1-quic_bqiang@quicinc.com
2024-02-05 18:59:48 +02:00
Sakari Ailus
bbf00be93e kernel-doc: Support arrays of pointers struct fields
In a rather unusual arrangement in include/media/v4l2-vp9.h struct
v4l2_vp9_frame_symbol_counts has fields that are arrays of pointers, not a
pointer to an array, which is what's usually done.

Add support for such arrays of pointers to kernel-doc.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240131084934.191226-1-sakari.ailus@linux.intel.com
2024-02-05 09:53:02 -07:00
Dave Airlie
61712c9478 nouveau/gsp: use correct size for registry rpc.
Timur pointed this out before, and it just slipped my mind,
but this might help some things work better, around pcie power
management.

Cc: <stable@vger.kernel.org> # v6.7
Fixes: 8d55b0a940 ("nouveau/gsp: add some basic registry entries.")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130032643.2498315-1-airlied@gmail.com
2024-02-05 17:36:48 +01:00
Rob Herring
17adc3f329 net: marvell,prestera: Fix example PCI bus addressing
The example for PCI devices has some addressing errors. 'reg' is written
as if the parent bus is PCI, but the default bus for examples is 1
address and size cell. 'ranges' is defining config space with a
size of 0. Generally, config space should not be defined in
'ranges', only PCI memory and I/O spaces. Fix these issues by updating
the values with made-up, but valid values.

This was uncovered with recent dtschema changes.

Link: https://lore.kernel.org/r/20240122173514.935742-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2024-02-05 16:33:23 +00:00
Krzysztof Kozlowski
281dc6c69b dt-bindings: mux: restrict node name suffixes
Make the pattern matching node names a bit stricter to improve DTS
consistency.  The pattern is restricted to -N suffixes to decimal
numbers.

Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20240109082511.15278-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
2024-02-05 16:32:20 +00:00
Max Filippov
15fd1dc3da fs: binfmt_elf_efpic: don't use missing interpreter's properties
Static FDPIC executable may get an executable stack even when it has
non-executable GNU_STACK segment. This happens when STACK segment has rw
permissions, but does not specify stack size. In that case FDPIC loader
uses permissions of the interpreter's stack, and for static executables
with no interpreter it results in choosing the arch-default permissions
for the stack.

Fix that by using the interpreter's properties only when the interpreter
is actually used.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20240118150637.660461-1-jcmvbkbc@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2024-02-05 08:15:11 -08:00
Jan Kara
c8f1140cb8 udf: Avoid invalid LVID used on mount
udf_load_logicalvolint() loads logical volume integrity descriptors.
Since there can be multiple blocks with LVIDs, we verify the contents of
only the last (prevailing) LVID found. However if we fail to load the
last LVID (either due to IO error or because it's checksum fails to
match), we never perform the verification of validity of the LVID we are
going to use. If such LVID contains invalid data, we can hit
out-of-bounds access or similar issues. Fix the problem by verifying
each LVID we are potentially going to accept.

Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
2024-02-05 16:51:59 +01:00
David Wei
8ff25dac88 netdevsim: add Makefile for selftests
Add a Makefile for netdevsim selftests and add selftests path to
MAINTAINERS

Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240130214620.3722189-5-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-05 07:34:02 -08:00
Ville Syrjälä
2a2e2f5f48 drm/i915/hdcp: Pin the hdcp gsc message high in ggtt
AFAICS there is no hardware restriction on where in ggtt
the hdcp gsc message object needs to be bound. And as it's
a regular shmem object we don't need it be in the mappabe
range either. So pin it high to make avoid needlessly
wasting the precious mappable range for it.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215110933.9188-3-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
2024-02-05 17:24:04 +02:00
Ville Syrjälä
e66a176592 drm/i915/hdcp: Do intel_hdcp_component_init() much later during init
intel_hdcp_component_init()->...->intel_hdcp_gsc_initialize_message()
will allocate ggtt address space for some hdcp gsc message thing.
That is currently being done way too early as we haven't even
taken over the BIOS fb yet. So this has the potential of corrupting
ggtt PTEs that need to be preserved until the BIOS fb takover
is done.

Only call intel_hdcp_component_init() once all the BIOS fb takeover,
and full ggtt init (which currently also needs to reserve very
specific ranges of ggtt, thus assuming that no one else has stolen
them yet) is done.

Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215110933.9188-2-ville.syrjala@linux.intel.com
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
2024-02-05 17:23:46 +02:00
Elad Nachman
e6a30d0c48 mtd: rawnand: marvell: fix layouts
The check in nand_base.c, nand_scan_tail() : has the following code:
(ecc->steps * ecc->size != mtd->writesize) which fails for some NAND chips.
Remove ECC entries in this driver which are not integral multiplications,
and adjust the number of chunks for entries which fails the above
calculation so it will calculate correctly (this was previously done
automatically before the check and was removed in a later commit).

Fixes: 68c18dae68 ("mtd: rawnand: marvell: add missing layouts")
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2024-02-05 16:16:24 +01:00
Wang Jianjian
d0aa72604f quota: Fix potential NULL pointer dereference
Below race may cause NULL pointer dereference

P1					P2
dquot_free_inode			quota_off
					  drop_dquot_ref
					   remove_dquot_ref
					   dquots = i_dquot(inode)
  dquots = i_dquot(inode)
  srcu_read_lock
  dquots[cnt]) != NULL (1)
					     dquots[type] = NULL (2)
  spin_lock(&dquots[cnt]->dq_dqb_lock) (3)
   ....

If dquot_free_inode(or other routines) checks inode's quota pointers (1)
before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer
dereference will be triggered.

So let's fix it by using a temporary pointer to avoid this issue.

Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240202081852.2514092-1-wangjianjian3@huawei.com>
2024-02-05 15:57:34 +01:00
Andrew Davis
69cd52b927 ARM: multi_v7_defconfig: Add more TI Keystone support
The Keystone platforms used their own keystone_defconfig mostly to
enable CONFIG_ARM_LPAE which could not be added to the multi_v7 config.
Now that we have multi_v7_lpae_defconfig/lpae.config target we can and
should use that defconfig for Keystone. Add the remaining must-have
options for Keystone support to multi_v7_defconfig.

TI_SCI_*:
TI_MESSAGE_MANAGER:
 Allows TI-SCI communication with system control firmware (PMMC) on K2G.

TI_KEYSTONE_NETCP*:
KEYSTONE_NAVIGATOR*:
 Network driver, needed for NFS boot.

PCI_KEYSTONE*:
CAN_C_CAN*:
INPUT_GPIO_DECODER:
SPI_CADENCE_QUADSPI:
PWM_TIECAP:
 Miscellaneous on-chip peripherals. Added as modules where possible.

RESET_TI*:
 Used by DSP Remoteproc driver.

bloat-o-meter:
add/remove: 387/0 grow/shrink: 6/0 up/down: 130945/0 (130945)
Total: Before=22791863, After=22922808, chg +0.57%

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240125163145.87055-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-05 08:51:28 -06:00
Nishanth Menon
11621bedc0 ARM: dts: keystone: Replace http urls with https
Replace http url instances with https.

Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240109195612.3833281-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2024-02-05 08:50:55 -06:00
NeilBrown
5ea9a7c5fe nfsd: don't take fi_lock in nfsd_break_deleg_cb()
A recent change to check_for_locks() changed it to take ->flc_lock while
holding ->fi_lock.  This creates a lock inversion (reported by lockdep)
because there is a case where ->fi_lock is taken while holding
->flc_lock.

->flc_lock is held across ->fl_lmops callbacks, and
nfsd_break_deleg_cb() is one of those and does take ->fi_lock.  However
it doesn't need to.

Prior to v4.17-rc1~110^2~22 ("nfsd: create a separate lease for each
delegation") nfsd_break_deleg_cb() would walk the ->fi_delegations list
and so needed the lock.  Since then it doesn't walk the list and doesn't
need the lock.

Two actions are performed under the lock.  One is to call
nfsd_break_one_deleg which calls nfsd4_run_cb().  These doesn't act on
the nfs4_file at all, so don't need the lock.

The other is to set ->fi_had_conflict which is in the nfs4_file.
This field is only ever set here (except when initialised to false)
so there is no possible problem will multiple threads racing when
setting it.

The field is tested twice in nfs4_set_delegation().  The first test does
not hold a lock and is documented as an opportunistic optimisation, so
it doesn't impose any need to hold ->fi_lock while setting
->fi_had_conflict.

The second test in nfs4_set_delegation() *is* make under ->fi_lock, so
removing the locking when ->fi_had_conflict is set could make a change.
The change could only be interesting if ->fi_had_conflict tested as
false even though nfsd_break_one_deleg() ran before ->fi_lock was
unlocked.  i.e. while hash_delegation_locked() was running.
As hash_delegation_lock() doesn't interact in any way with nfs4_run_cb()
there can be no importance to this interaction.

So this patch removes the locking from nfsd_break_one_deleg() and moves
the final test on ->fi_had_conflict out of the locked region to make it
clear that locking isn't important to the test.  It is still tested
*after* vfs_setlease() has succeeded.  This might be significant and as
vfs_setlease() takes ->flc_lock, and nfsd_break_one_deleg() is called
under ->flc_lock this "after" is a true ordering provided by a spinlock.

Fixes: edcf972515 ("nfsd: fix RELEASE_LOCKOWNER")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-02-05 09:49:47 -05:00
Aradhya Bhatia
cff6dd01a6 arm64: dts: ti: Makefile: Add HDMI audio check for AM62A7-SK
HDMI audio can be enabled over AM62A-SK using the same DT overlay that
is used for AM625 / AM62-LP SK-EVMs.

Add the sk.dtb + hdmi-audio.dtbo combination for AM62A7-SK as well, to
check for overlay applicability during DTBS compile tests.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240201125452.1920623-4-a-bhatia1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-05 20:19:14 +05:30
Aradhya Bhatia
396ca2fc73 arm64: dts: ti: k3-am62a7-sk: Add HDMI support
The DSS outputs DPI signals via its second video port (VP2). The DPI
output from DSS is 24 bits (RGB888) and is forwarded to an HDMI
transmitter (SIL9022) on the board.

Add pinmux info for DSS DPI output.

Add DT nodes for SIL9022 HDMI transmitter (TX), and the HDMI connector
on the AM62A7-SK platforms.

Additionally, connect the output of DSS (VP2) with input of the HDMI TX,
and the output of HDMI TX to the input of the HDMI connector.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240201125452.1920623-3-a-bhatia1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-05 20:19:14 +05:30
Aradhya Bhatia
3618811657 arm64: dts: ti: k3-am62a-main: Add node for Display SubSystem (DSS)
Add Display SubSystem (DSS) DT node for the AM62A7 SoC.

The DSS supports one each of video pipeline (vid) and video-lite
pipeline (vidl1). The video port 1 (vp1) is tied-off in AM62A SoC, but
the pipeline remains active. The video port 2 (vp2) outputs the DPI
signals. Both the video ports are connected to the pipelines via 2
identical overlay managers (ovr1 and ovr2).

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20240201125452.1920623-2-a-bhatia1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-05 20:19:14 +05:30