Some components act as bridges only and do not require full configuration.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add configuration of more components in MT8195 MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Increasing the number of sets built by MMSYS and MUTEX in MT8195
will enable the creation of more pipelines in MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
After setting up the second set of MMSYS (VPPSYS1), it is necessary
to have a corresponding second set of MUTEX (MUTEX2) to assist in
handling SOF/EOF.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The MT8195 chipset features two MMSYS subsets: VPPSYS0 and VPPSYS1.
These subsets coordinate and control the clock, power, and
register settings required for the components of MDP3.
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the TODO items for using the main (drivers/media/i2c) ov2680 and
ov5693 drivers and removing the atomisp specific ones, this has been done.
Remove the TODO item for gracefully handling missing firmware the
"media: atomisp: Bind and do power-management without firmware" changes
have fixed this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove unnecessary msleep(10) from atomisp_mrfld_power() error-exit path,
the success exit from atomisp_mrfld_power() happens if a test succeeds
inside the do { } while loop above the msleep().
The error-exit path with the removed msleep is only hit it the power-on is
not reflected in the iUNIT ISPSSPM0 status bits after a timeout of 50 ms.
Sleeping an extra 10 ms in the timeout path makes little sense.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The ISP needs to be turned off in a special manner for the SoC
to be able to reach S0i3 during suspend.
When the firmware is missing still bind to the PCI device and
run in pm-only mode which takes care of turning the ISP off
(including turning it off again if the firmware has turned it
on during resume).
In this new pm-only mode the atomisp driver works exactly the same
as the non-staging, pm-only drivers/platform/x86/intel/atomisp2/pm.c
driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move the power-management setup and cleanup code into
atomisp_pm_[un]init() helper functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
sysfs attributes preferably should not be manually be registered but
instead the driver.groups / driver.dev_groups driver struct members
should be used to have the driver core handle this in a race free
manner.
Using driver.groups would be the most direct replacement for
driver_[add|remove]_file, but some of the attributes actually need access
to the struct atomisp_device (*), so as part of modernizing this part of
the atomisp driver this change also makes the sysfs attribute device
attributes instead of driver attributes.
*) Before this change accessing these attributes without the driver having
bound would result in a NULL pointer deref, this commit fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix probe()/remove() power-management:
-Currently the driver uses pm_runtime_put_noidle() and relies on
userspace to open + close the /dev/video# node at least once to
actually turn the ISP off. Replace the pm_runtime_put_noidle()
with pm_runtime_put_sync() to make sure that the device is turned
off without relying on userspace for this.
This also ensures that atomisp_css_init() is run (by atomisp_power_on())
if the first userspace process opening /dev/video# wants to do more then
just query the v4l2-caps.
As part of this change move the pm setup code in probe() to just before
calling v4l2_async_nf_register() which registers the /dev/* nodes, so
that the device is left on for the entirety of the probe() function.
-Remove the turning off of the atomisp from the exit-error path,
the PCI subsystem and subsequent probe() attempts expect the device
to be in the on state when probe() fails.
This also fixes the atomisp driver causing the system to hang / freeze
when its firmware is missing. This freeze is caused by an unidentified
bug in the power-off on exit-error code which is now removed.
-Make sure that remove() properly powers on the device by replacing
pm_runtime_get_noresume() with pm_runtime_get_sync. The PCI subsystem
and subsequent probe() attempts expect the device to be in the on state
after unbinding the driver.
-Note this also swaps the order of put()/allow() and forbid()/get()
so that the sync versions actually work by calling allow() before put()
and forbid() after get()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Group the cpu_latency_qos_add_request() call in probe() together with
the other PM calls in probe().
This is a preparation patch for futher PM fixes / work.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix atomisp_pci_remove():
-Remove uninformative "Removing atomisp driver" log message
-Add missing devm_free_irq(), atomisp_uninitialize_modules() and
pci_free_irq_vectors() calls
-Move atomisp_msi_irq_uninit() down so that the remove() order is
an exact mirror of the probe() order
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix probe error-exit path:
-Add a missing ia_css_unload_firmware() call when v4l2_async_nf_register()
fails
-Add a missing pm_runtime_forbid() call to undo the pm_runtime_allow() call
-Remove the unnecessary pcim_iounmap_regions() those are devm managed
so they will get cleaned up automatically on an error exit from probe()
-Rename the labels to avoid having multiple labels pointing to the same
place in the error-exit path
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ATM the atomisp firmware is not available in linux-firmware,
so most users will not have it installed.
Move pcim_enable_device() and pcim_iomap_regions() down in
atomisp_pci_probe() so that they are never called when the firmware
is not there.
This is a preparation patch for making the atomisp driver handle
missing firmware better.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Now that a single build supports both the ISP 2400 and the ISP 2401
this function is no longer necessary. The main probe() already
contains a similar switch (id->device & ATOMISP_PCI_DEVICE_SOC_MASK)
checking for a known device_id.
Move the revision check into the main probe() and drop
the is_valid_device() function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There is a bunch of dead code left from the deferred firmware loading
support which was removed in commit 8972ed6ea7 ("media: atomisp: Remove
deferred firmware loading support").
Remove this dead code:
- Remove the skip_fwload module parameter
- Remove the now always NULL fw argument from ia_css_init()
- Remove the fw_explicitly_loaded boolean from sh_css.c
(this was always true now)
- Adjust some function kernel-doc comments to match
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
sensor drivers do not implement the s_routing subdev call, so there is
no use in calling it.
Also the 3 0 arguments are not the arguments which a successful
s_routing call is supposed to take.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
codespell reported spelling mistakes in
ia_css_acc_types.h as below:
'''
ia_css_acc_types.h:87: cummulative ==> cumulative
ia_css_acc_types.h:411: descibes ==> describes
'''
This patch fixes these spelling mistakes.
Word "cummulative" is changed to "accumulation"
and "descibes" to "describes".
Link: https://lore.kernel.org/r/20231223141157.95501-1-kdipendra88@gmail.com
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
codespell reported following spelling mistake
in rmgr_vbuf.cas below:
'''
./runtime/rmgr/src/rmgr_vbuf.c:201: succes ==> success
./runtime/rmgr/src/rmgr_vbuf.c:211: succes ==> success
./runtime/rmgr/src/rmgr_vbuf.c:215: succes ==> success
'''
This patch fixes these spelling mistakes.
It is good to use variable name that gives
proper meaning and spelling error free.
Link: https://lore.kernel.org/r/20231223072245.81630-1-kdipendra88@gmail.com
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
codespell reported following spelling mistake
in sh_css_mipi.c as below:
'''
./sh_css_mipi.c:177: separatelly ==> separately
./sh_css_mipi.c:540: ofset ==> offset, of set
'''
This patch fixes these spelling mistakes by changing
"separatelly" to "separately" and "ofset" to "offset".
Link: https://lore.kernel.org/r/20231223064152.79712-1-kdipendra88@gmail.com
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
codespell reported following spelling mistake
in ia_css_circbuf.h as below:
'''
./base/circbuf/interface/ia_css_circbuf.h:76: poistion ==> position
'''
This patch fixes this spelling mistake.
Link: https://lore.kernel.org/r/20231223061647.78669-1-kdipendra88@gmail.com
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The script checkpatch.pl reported a spelling error
in isp2400_input_system_global.h as below:
'''
WARNING: 'upto' may be misspelled - perhaps 'up to'?
//MIPI allows upto 4 channels.
^^^^
'''
This patch corrects a spelling error,
changing "upto" to "up to".
Link: https://lore.kernel.org/r/20231222201503.2337-1-kdipendra88@gmail.com
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The script checkpatch.pl reported repeated
word 'of' in isp2400_input_system_public.h
as below:
'''
WARNING: Possible repeated word: 'of'
/*! Read from a control register PORT[port_ID] of of RECEIVER[ID]
'''
This patch removes one 'of'.
Link: https://lore.kernel.org/r/20231222194036.1984-1-kdipendra88@gmail.com
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are several variables that are being initialized with values
that are never read, the assignment are redundant and can be removed.
Cleans up cppcheck unreadVariable warnings.
Link: https://lore.kernel.org/r/20231219143929.367929-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The script checkpatch.pl reported a spelling error
in sh_css_defs.h as below:
'''
WARNING: 'upto' may be misspelled - perhaps 'up to'?
/* The FPGA system (vec_nelems == 16) only supports upto 5MP */
^^^^
'''
This patch corrects a spelling error,
changing "upto" to "up to".
Link: https://lore.kernel.org/r/20231218153200.450148-1-kdipendra88@gmail.com
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The script checkpatch.pl reported spelling errors
in ia_css_irq.h as below:
'''
WARNING: Possible repeated word: 'in'
/** the input system in in error */
WARNING: Possible repeated word: 'in'
/** the input formatter in in error */
WARNING: Possible repeated word: 'in'
/** the dma in in error */
'''
This patch corrects spelling errors,
changing "in" to "is" in all three comments.
Link: https://lore.kernel.org/r/20231218151704.449883-1-kdipendra88@gmail.com
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixed the following issues:
* Removed a duplicate comment
* Fixed up minor comment format issue
Link: https://lore.kernel.org/r/20231014083545.173238-1-bergh.jonathan@gmail.com
Signed-off-by: Jonathan Bergh <bergh.jonathan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are 3 code-paths all of 3 which need to do:
1. Get try or active state
2. lock state
3. Call atomisp_set_crop()
4. Call v4l2_subdev_call(input->camera, pad, set_fmt, state, fmt)
5. unlock state
Change atomisp_set_crop into atomisp_set_crop_and_fmt() which does all of
this and change the 3 code-paths which need this to use the new
atomisp_set_crop_and_fmt() function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The atomisp driver emulates a standard v4l2 device, which also works
for non media-controller aware applications.
Part of this requires making try_fmt calls on the sensor when
a normal v4l2 app is making try_fmt calls on the /dev/video# mode.
With the recent v4l2_subdev_state handling changes in 6.8 this no longer
works, fixing this requires 2 changes:
1. The atomisp code was using its own internal v4l2_subdev_pad_config
for this. Replace the internal v4l2_subdev_pad_config with allocating
a full v4l2_subdev_state for storing the full try_fmt state.
2. The paths actually setting the fmt or crop selection now need to be
passed the v4l2_subdev's active state, so that sensor drivers which
are using the v4l2_subdev's active state to store their state keep
working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver requests the interrupts as IRQF_SHARED, so the interrupt
handlers can be called at any time. If such a call happens while the ISP
is powered down, the SoC will hang as the driver tries to access the
ISP registers.
This can be reproduced even without the platform sharing the IRQ line:
Enable CONFIG_DEBUG_SHIRQ and unload the driver, and the board will
hang.
Fix this by adding a new field, 'irqs_enabled', which is used to bail
out from the interrupt handler when the ISP is not operational.
Link: https://lore.kernel.org/r/20231218-rkisp-shirq-fix-v1-2-173007628248@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This reverts commit 85d2a31fe4.
The rkisp1 does share interrupt lines on some platforms, after all. Thus
we need to revert this, and implement a fix for the rkisp1 shared irq
handling in a follow-up patch.
Closes: https://lore.kernel.org/all/87o7eo8vym.fsf@gmail.com/
Link: https://lore.kernel.org/r/20231218-rkisp-shirq-fix-v1-1-173007628248@ideasonboard.com
Reported-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Donald Hunter says:
====================
tools/net/ynl: Add features for tc family
Add features to ynl for tc and update the tc spec to use them.
Patch 1 adds an option to output json instead of python pretty printing.
Patch 2, 3 adds support and docs for sub-messages in nested attribute
spaces that reference keys from a parent space.
Patches 4 and 7-9 refactor ynl in support of nested struct definitions
Patch 5 implements sub-message encoding for write ops.
Patch 6 adds logic to set default zero values for binary blobs
Patches 10, 11 adds support and docs for nested struct definitions
Patch 12 updates the ynl doc generator to include type information for
struct members.
Patch 13 updates the tc spec - still a work in progress but more complete
====================
Link: https://lore.kernel.org/r/20240129223458.52046-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fill in many of the gaps in the tc netlink spec, including stats attrs,
classes and actions. Many documentation strings have also been added.
This is still a work in progress, albeit fairly complete:
- there are still many attributes left as binary blobs.
- actions have not had much testing
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-14-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the ynl doc generator to include type information for struct
members, ignoring the pad type.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-13-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a description and example of nested struct definitions
to the netlink raw documentation.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-12-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make it possible for struct definitions to reference other struct
definitions ofr binary members. For example, the tbf qdisc uses this
struct definition for its parms attribute:
-
name: tc-tbf-qopt
type: struct
members:
-
name: rate
type: binary
struct: tc-ratespec
-
name: peakrate
type: binary
struct: tc-ratespec
-
name: limit
type: u32
-
name: buffer
type: u32
-
name: mtu
type: u32
This adds the necessary schema changes and adds nested struct encoding
and decoding to ynl.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-11-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The formatted_string() class method was in NlAttr so that it could be
accessed by NlAttr.as_struct(). Now that as_struct() has been removed,
move formatted_string() to YnlFamily as an internal helper method.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-10-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the _fixed_header_size() method to be _struct_size() so that
naming is consistent with _encode_struct() and _decode_struct().
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-9-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
_decode_fixed_header() and NlAttr.as_struct() both implemented struct
decoding logic. Deduplicate the code into newly named _decode_struct()
method.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-8-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for defaulting binary byte arrays to all zeros as well as
defaulting scalar values to 0 when encoding input parameters.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add sub-message encoding to ynl. This makes it possible to create
tc qdiscs and other polymorphic netlink objects.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the fixed header encoding into a separate _encode_struct method
so that it can be reused for fixed headers in sub-messages and for
encoding structs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the netlink-raw docs to add a description of sub-message selector
resolution to explain that selector resolution is constrained by the
spec.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sub-message selectors could only be resolved using values from the
current nest level. Enable value lookup in outer scopes by using
collections.ChainMap to implement an ordered lookup from nested to
outer scopes.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>