Extend the PMU counters test to validate architectural events using fixed
counters. The core logic is largely the same, the biggest difference
being that if a fixed counter exists, its associated event is available
(the SDM doesn't explicitly state this to be true, but it's KVM's ABI and
letting software program a fixed counter that doesn't actually count would
be quite bizarre).
Note, fixed counters rely on PERF_GLOBAL_CTRL.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test cases to verify that Intel's Architectural PMU events work as
expected when they are available according to guest CPUID. Iterate over a
range of sane PMU versions, with and without full-width writes enabled,
and over interesting combinations of lengths/masks for the bit vector that
enumerates unavailable events.
Test up to vPMU version 5, i.e. the current architectural max. KVM only
officially supports up to version 2, but the behavior of the counters is
backwards compatible, i.e. KVM shouldn't do something completely different
for a higher, architecturally-defined vPMU version. Verify KVM behavior
against the effective vPMU version, e.g. advertising vPMU 5 when KVM only
supports vPMU 2 shouldn't magically unlock vPMU 5 features.
According to Intel SDM, the number of architectural events is reported
through CPUID.0AH:EAX[31:24] and the architectural event x is supported
if EBX[x]=0 && EAX[31:24]>x.
Handcode the entirety of the measured section so that the test can
precisely assert on the number of instructions and branches retired.
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a PMU library for x86 selftests to help eliminate open-coded event
encodings, and to reduce the amount of copy+paste between PMU selftests.
Use the new common macro definitions in the existing PMU event filter test.
Cc: Aaron Lewis <aaronlewis@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the kvm_x86_pmu_feature framework to allow querying for fixed
counters via {kvm,this}_pmu_has(). Like architectural events, checking
for a fixed counter annoyingly requires checking multiple CPUID fields, as
a fixed counter exists if:
FxCtr[i]_is_supported := ECX[i] || (EDX[4:0] > i);
Note, KVM currently doesn't actually support exposing fixed counters via
the bitmask, but that will hopefully change sooner than later, and Intel's
SDM explicitly "recommends" checking both the number of counters and the
mask.
Rename the intermedate "anti_feature" field to simply 'f' since the fixed
counter bitmask (thankfully) doesn't have reversed polarity like the
architectural events bitmask.
Note, ideally the helpers would use BUILD_BUG_ON() to assert on the
incoming register, but the expected usage in PMU tests can't guarantee the
inputs are compile-time constants.
Opportunistically define macros for all of the known architectural events
and fixed counters.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the "name" parameter from KVM_X86_PMU_FEATURE(), it's unused and
the name is redundant with the macro, i.e. it's truly useless.
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add vcpu_set_cpuid_property() helper function for setting properties, and
use it instead of open coding an equivalent for MAX_PHY_ADDR. Future vPMU
testcases will also need to stuff various CPUID properties.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly check for attempts to read unsupported PMC types instead of
letting the bounds check fail. Functionally, letting the check fail is
ok, but it's unnecessarily subtle and does a poor job of documenting the
architectural behavior that KVM is emulating.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Refactor KVM's handling of ECX for RDPMC to treat the FIXED modifier as an
explicit value, not a flag (minus one wart). While non-architectural PMUs
do use bit 31 as a flag (for "fast" reads), architectural PMUs use the
upper half of ECX to encode the type. From the SDM:
ECX[31:16] specifies type of PMC while ECX[15:0] specifies the index of
the PMC to be read within that type
Note, that the known supported types are 4000H and 2000H, i.e. look a lot
like flags, doesn't contradict the above statement that ECX[31:16] holds
the type, at least not by any sane reading of the SDM.
Keep the explicitly clearing of the FIXED "flag", as KVM subtly relies on
that behavior to disallow unsupported types while allowing the correct
indices for fixed counters. This wart will be cleaned up in short order.
Opportunistically grab the per-type bitmask in the if-else blocks to
eliminate the one-off usage of the local "fixed" bool.
Reported-by: Jim Mattson <jmattson@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Inject #GP on RDPMC if the "fast" flag is set for architectural Intel
PMUs, i.e. if the PMU version is non-zero. Per Intel's SDM, and confirmed
on bare metal, the "fast" flag is supported only for non-architectural
PMUs, and is reserved for architectural PMUs.
If the processor does not support architectural performance monitoring
(CPUID.0AH:EAX[7:0]=0), ECX[30:0] specifies the index of the PMC to be
read. Setting ECX[31] selects “fast” read mode if supported. In this mode,
RDPMC returns bits 31:0 of the PMC in EAX while clearing EDX to zero.
If the processor does support architectural performance monitoring
(CPUID.0AH:EAX[7:0] ≠ 0), ECX[31:16] specifies type of PMC while ECX[15:0]
specifies the index of the PMC to be read within that type. The following
PMC types are currently defined:
— General-purpose counters use type 0. The index x (to read IA32_PMCx)
must be less than the value enumerated by CPUID.0AH.EAX[15:8] (thus
ECX[15:8] must be zero).
— Fixed-function counters use type 4000H. The index x (to read
IA32_FIXED_CTRx) can be used if either CPUID.0AH.EDX[4:0] > x or
CPUID.0AH.ECX[x] = 1 (thus ECX[15:5] must be 0).
— Performance metrics use type 2000H. This type can be used only if
IA32_PERF_CAPABILITIES.PERF_METRICS_AVAILABLE[bit 15]=1. For this type,
the index in ECX[15:0] is implementation specific.
Opportunistically WARN if KVM ever actually tries to complete RDPMC for a
non-architectural PMU, and drop the non-existent "support" for fast RDPMC,
as KVM doesn't support such PMUs, i.e. kvm_pmu_rdpmc() should reject the
RDPMC before getting to the Intel code.
Fixes: f5132b0138 ("KVM: Expose a version 2 architectural PMU to a guests")
Fixes: 67f4d4288c ("KVM: x86: rdpmc emulation checks the counter incorrectly")
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the handling of "fast" RDPMC instructions, which drop bits 63:32 of
the count, to Intel. The "fast" flag, and all modifiers for that matter,
are Intel-only and aren't supported by AMD.
Opportunistically replace open coded bit crud with proper #defines, and
add comments to try and disentangle the flags vs. values mess for
non-architectural vs. architectural PMUs.
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Apply the pre-intercepts RDPMC validity check only to AMD, and rename all
relevant functions to make it as clear as possible that the check is not a
standard PMC index check. On Intel, the basic rule is that only invalid
opcodes and privilege/permission/mode checks have priority over VM-Exit,
i.e. RDPMC with an invalid index should VM-Exit, not #GP. While the SDM
doesn't explicitly call out RDPMC, it _does_ explicitly use RDMSR of a
non-existent MSR as an example where VM-Exit has priority over #GP, and
RDPMC is effectively just a variation of RDMSR.
Manually testing on various Intel CPUs confirms this behavior, and the
inverted priority was introduced for SVM compatibility, i.e. was not an
intentional change for Intel PMUs. On AMD, *all* exceptions on RDPMC have
priority over VM-Exit.
Check for a NULL kvm_pmu_ops.check_rdpmc_early instead of using a RET0
static call so as to provide a convenient location to document the
difference between Intel and AMD, and to again try to make it as obvious
as possible that the early check is a one-off thing, not a generic "is
this PMC valid?" helper.
Fixes: 8061252ee0 ("KVM: SVM: Add intercept checks for remaining twobyte instructions")
Cc: Jim Mattson <jmattson@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stop stripping bits 31:30 prior to validating/consuming the RDPMC index on
AMD. Per the APM's documentation of RDPMC, *values* greater than 27 are
reserved. The behavior of upper bits being flags is firmly Intel-only.
Fixes: ca724305a2 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Get the event selectors used to effectively request fixed counters for
perf events from perf itself instead of hardcoding them in KVM and hoping
that they match the underlying hardware. While fixed counters 0 and 1 use
architectural events, as of ffbe4ab0be ("perf/x86/intel: Extend the
ref-cycles event to GP counters") fixed counter 2 (reference TSC cycles)
may use a software-defined pseudo-encoding or a real hardware-defined
encoding.
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Closes: https://lkml.kernel.org/r/4281eee7-6423-4ec8-bb18-c6aeee1faf2c%40linux.intel.com
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set the eventsel for all fixed counters during PMU initialization, the
eventsel is hardcoded and consumed if and only if the counter is supported,
i.e. there is no reason to redo the setup every time the PMU is refreshed.
Configuring all KVM-supported fixed counter also eliminates a potential
pitfall if/when KVM supports discontiguous fixed counters, in which case
configuring only nr_arch_fixed_counters will be insufficient (ignoring the
fact that KVM will need many other changes to support discontiguous fixed
counters).
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop KVM's enumeration of Intel's architectural event encodings, and
instead open code the three encodings (of which only two are real) that
KVM uses to emulate fixed counters. Now that KVM doesn't incorrectly
enforce the availability of architectural encodings, there is no reason
for KVM to ever care about the encodings themselves, at least not in the
current format of an array indexed by the encoding's position in CPUID.
Opportunistically add a comment to explain why KVM cares about eventsel
values for fixed counters.
Suggested-by: Jim Mattson <jmattson@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove KVM's bogus restriction that the guest can't program an event whose
encoding matches an unsupported architectural event. The enumeration of
an architectural event only says that if a CPU supports an architectural
event, then the event can be programmed using the architectural encoding.
The enumeration does NOT say anything about the encoding when the CPU
doesn't report support the architectural event.
Preventing the guest from counting events whose encoding happens to match
an architectural event breaks existing functionality whenever Intel adds
an architectural encoding that was *ever* used for a CPU that doesn't
enumerate support for the architectural event, even if the encoding is for
the exact same event!
E.g. the architectural encoding for Top-Down Slots is 0x01a4. Broadwell
CPUs, which do not support the Top-Down Slots architectural event, 0x01a4
is a valid, model-specific event. Denying guest usage of 0x01a4 if/when
KVM adds support for Top-Down slots would break any Broadwell-based guest.
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Closes: https://lore.kernel.org/all/2004baa6-b494-462c-a11f-8104ea152c6a@linux.intel.com
Fixes: a21864486f ("KVM: x86/pmu: Fix available_event_types check for REF_CPU_CYCLES event")
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Treat fixed counters as available when they are supported, i.e. don't
silently ignore an enabled fixed counter just because guest CPUID says the
associated general purpose architectural event is unavailable.
KVM originally treated fixed counters as always available, but that got
changed as part of a fix to avoid confusing REF_CPU_CYCLES, which does NOT
map to an architectural event, with the actual architectural event used
associated with bit 7, TOPDOWN_SLOTS.
The commit justified the change with:
If the event is marked as unavailable in the Intel guest CPUID
0AH.EBX leaf, we need to avoid any perf_event creation, whether
it's a gp or fixed counter.
but that justification doesn't mesh with reality. The Intel SDM uses
"architectural events" to refer to both general purpose events (the ones
with the reverse polarity mask in CPUID.0xA.EBX) and the events for fixed
counters, e.g. the SDM makes statements like:
Each of the fixed-function PMC can count only one architectural
performance event.
but the fact that fixed counter 2 (TSC reference cycles) doesn't have an
associated general purpose architectural makes trying to apply the mask
from CPUID.0xA.EBX impossible.
Furthermore, the lack of enumeration for an architectural event in CPUID
only means the CPU doesn't officially support the architectural encoding,
i.e. it doesn't mean using the architectural encoding _won't_ work, it
sipmly means there are no guarantees that it will work as expected. E.g.
if KVM is running in a VM that advertises a fixed counters but not the
corresponding architectural event encoding, and perf decides to use a
general purpose counter instead of a fixed counter, odds are very good
that the underlying hardware actually does support the architectrual
encoding, and that programming the encoding will count the right thing.
In other words, asking perf to count the event will probably work, whereas
intentionally doing nothing is obviously guaranteed to fail.
Note, at the time of the change, KVM didn't enforce hardware support, i.e.
didn't prevent userspace from enumerating support in guest CPUID.0xA.EBX
for architectural events that aren't supported in hardware. I.e. silently
dropping the fixed counter didn't somehow protection against counting the
wrong event, it just enforced guest CPUID. And practically speaking, this
issue is almost certainly limited to running KVM on a funky virtual CPU
model. No known real hardware has an asymmetric PMU where a fixed counter
is supported but the associated architectural event is not.
Fixes: a21864486f ("KVM: x86/pmu: Fix available_event_types check for REF_CPU_CYCLES event")
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add initial support for the new Goodix "Berlin" touchscreen ICs.
These touchscreen ICs support SPI, I2C and I3C interface, up to
10 finger touch, stylus and gestures events.
This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550 MTP & QRD touch panel.
The current implementation only supports BerlinD, aka GT9916.
Support for advanced features like:
- Firmware & config update
- Stylus events
- Gestures events
- Previous revisions support (BerlinA or BerlinB)
is not included in current version.
The current support will work with currently flashed firmware
and config, and bail out if firmware or config aren't flashed yet.
[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-2-6f7d096c0a0a@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This kunit fixes update for Linux 6.8-rc3 consists of NULL vs IS_ERR()
bug fixes, documentation update, MAINTAINERS file update to add
Rae Moar as a reviewer, and a fix to run test suites only after module
initialization completes.
-----BEGIN PGP SIGNATURE-----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=BWfz
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"NULL vs IS_ERR() bug fixes, documentation update, MAINTAINERS file
update to add Rae Moar as a reviewer, and a fix to run test suites
only after module initialization completes"
* tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Update the instructions on how to test static functions
kunit: run test suites only after module initialization completes
MAINTAINERS: kunit: Add Rae Moar as a reviewer
kunit: device: Fix a NULL vs IS_ERR() check in init()
kunit: Fix a NULL vs IS_ERR() bug
This kselftest fixes update for Linux 6.8-rc3 consists of three
fixes to livepatch, rseq, and seccomp tests.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmW5bRQACgkQCwJExA0N
QxyMNxAAj/VwvGuZMHtFv7PNS2GAe0ifCKQvuOGJXx53K+SZQZ9VftJ9wIc9TqwT
GtQCyXznpxBc1jELjE/7mx9xybCBIwwzIqPsDPmVmWopUVJeboh6W4nSeg0EALcZ
md6w6ps0n7x2kuXvVR/Ie4LFG8WMMXyttLkS/Typd4TNERjr8bDmx1bABuA21uxg
qG7FfME9AldaDUdj3AVsEKlqWXDnbMrou2mIzOSNLXk3UFcjx9dDsbeYC3WYvi/9
/3wmNElPssco9JgWjn+14CV690qXDXR7FhsK/osHpojWXMweW1i3msAyrwYR3gCL
HtrLJwh94LRiS6EvddqaoL+A5/N5irbS6xzXlsxW9axsmbFlHKnzu56C4uVfp+hE
eZp8U69CygTUXLhJOs3wM+Ahkss2HHZDL6caA6Mb25Ui7iAZi1oTNToyADYVauMo
jFKYW/FNTZBGMUaJCY3nIU5QGBVpG6bDzJZDyRQVrhrQMs2YEkILzSnK8ru+28kj
KNMxbRnvrOCu6NxG7mPPIT1nCJwSx0+z2oCGnGuN9G4p6tidMQXIVyVPcgsHktjG
Z2KkcUTVdk6Qkdgmdmfvtak1jswoQvDu6QK+Ub+In6L8QJVj2Mc7UvpGUwinwhEM
aGxp/ref/Go+WL0W82p1vThEes2sdYb/PrJAbuGjONBAoXgLpvI=
=0a0Q
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Three fixes to livepatch, rseq, and seccomp tests"
* tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest/seccomp: Report each expectation we assert as a KTAP test
kselftest/seccomp: Use kselftest output functions for benchmark
selftests/livepatch: fix and refactor new dmesg message code
selftests/rseq: Do not skip !allowed_cpus for mm_cid
Add a device tree for the Xiaomi Redmi Note 9S (curtana) phone, based on
sm7125-xiaomi-common.dtsi.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Joe Mason <buddyjojo06@outlook.com>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-8-f7d1212c8ebb@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Xiaomi Redmi Note 9S (curtana) smartphone, which is based
on the Qualcomm SM7125 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-4-f7d1212c8ebb@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This device has a vibrator attached to the CAMSS_GP0_CLK, use clk-pwm
and pwm-vibrator to make the vibrator work.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240121-lenok-vibrator-v1-1-d4703ff92021@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck.
It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad,
volume buttons, a power button, and 2 LED ring lights.
The Legion Go firmware presents these controls as a USB hub with various
devices attached. In its default state, the gamepad is presented as an
Xbox controller connected to this hub. (By holding a combination of
buttons, it can be changed to use the older DirectInput API.)
This patch teaches the existing Xbox controller module `xpad` to bind to
the controller in the Legion Go, which enables support for the:
- directional pad,
- analog sticks (including clicks),
- X, Y, A, B,
- start and select (or menu and capture),
- shoulder buttons, and
- rumble.
The trackpad, touchscreen, volume controls, and power button are already
supported via existing kernel modules. Two of the face buttons, the
gyroscopes, rear paddles, and LEDs are not.
After this patch lands, the Legion Go will be mostly functional in Linux,
out-of-the-box. The various components of the USB hub can be synthesized
into a single logical controller (including the additional buttons) in
userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which
makes the Go fully functional.
Signed-off-by: Brenton Simpson <appsforartists@google.com>
Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
For these hooks the true "neutral" value is -EOPNOTSUPP, which is
currently what is returned when no LSM provides this hook and what LSMs
return when there is no security context set on the socket. Correct the
value in <linux/lsm_hooks.h> and adjust the dispatch functions in
security/security.c to avoid issues when the BPF LSM is enabled.
Cc: stable@vger.kernel.org
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The Inforce IFC6560 board actually has USB SS lines routed to the USB-C
connector. Enable USB 3.0 PHY and SS mode for the USB3 host.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-4-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define USB3 QMP PHY presend on the SDM630 / SDM660 platforms. Enable it by
default in the USB3 host, but (for compatibility), force USB 2.0 mode
for all defined boards. The boards should opt-in to enable USB 3.0
support.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-3-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CAMSS block definition for sc8280xp.
This drop contains definitions for the following components on sc8280xp:
VFE * 4
VFE Lite * 4
CSID * 4
CSIPHY * 4
This dtsi definition has been developed and validated on a Lenovo X13s
laptop.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-4-cdd5c57ff1dc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
sc8280xp has four Camera Control Interface (CCI) blocks which pinout to
two I2C master controllers for each CCI.
The CCI I2C pins are not muxed so we define them in the dtsi.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-3-cdd5c57ff1dc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The rule inside kvm enforces that the vcpu->mutex is taken *inside*
kvm->lock. The rule is violated by the pkvm_create_hyp_vm() which acquires
the kvm->lock while already holding the vcpu->mutex lock from
kvm_vcpu_ioctl(). Avoid the circular locking dependency altogether by
protecting the hyp vm handle with the config_lock, much like we already
do for other forms of VM-scoped data.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240124091027.1477174-2-sebastianene@google.com
The kernel subsystem APIs front page currently has four top-level
groupings with headers, and then everything else that isn't grouped.
But in the table-of-contents, ungrouped subsystems are indented as
if they were part of the preceding grouping (currently "Storage
interfaces"), which is confusing.
Fix this by adding an "Other subsystems" header for the ungrouped
subsystems.
Fixes: 3c591cc954 ("docs: consolidate human interface subsystems")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240125045941.123297-1-mhklinux@outlook.com
fedora 38 and later changed the directory and package name that
provides NotoSansCJK-Regular.ttc. this adds the new search path and
suggests the correct package if on fedora 38 or later.
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240124043918.31771-1-andrewjballance@gmail.com
In the Linux perf tool, the ring buffer serves not only as a medium for
transferring PMU event data but also as a vital mechanism for hardware
tracing using technologies like Intel PT and Arm CoreSight, etc.
Consequently, the ring buffer mechanism plays a crucial role by ensuring
high throughput for data transfer between the kernel and user space
while avoiding excessive overhead caused by the ring buffer itself.
This commit documents the ring buffer mechanism in detail. It explains
the implementation of both the regular ring buffer and the AUX ring
buffer. Additionally, it covers how these ring buffers support various
tracing modes and explains the synchronization with memory barriers.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240102085001.228815-1-leo.yan@linaro.org
The Qualcomm SA8295P ADP board uses a max20411 to power the GPU
subsystem.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-8-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SA8295P and SA8540P the GFX rail is powered by a dedicated external
regulator, instead of the rpmh-controlled "gfx.lvl".
Define the "vdd-gfx" as the supply regulator for the GDSC, to cause the
gdsc logic to look for, and control, this external power supply.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-3-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GX GDSC is modelled to aid the GMU in powering down the GPU in the
event that the GPU crashes, so that it can be restarted again. But in
the event that the power-domain is supplied through a dedicated
regulator (in contrast to being a subdomin of another power-domain),
something needs to turn that regulator on, both to make sure things are
powered and to match the operation in gdsc_disable().
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-2-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add some subsection headings and reorder entries so that the page makes a
bit more sense. With luck, adding some ordering will also reduce merge
conflicts due to everybody adding new entries at the end.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/87ttn5m2q1.fsf@meer.lwn.net
In some designs the SoC's VDD_GFX pads are supplied by an external
regulator, rather than a power-domain. Allow this to be described in the
GPU clock controller binding.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-1-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add subsections in an attempt to bring a bit order to this page; also sort
most subsections into alphabetical order. With luck all this will help to
prevent merge conflicts on this page due to everybody adding entries at the
end.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/87plxtm2oo.fsf@meer.lwn.net
With the necessary support in place for supplying VDD_GFX from the
MAX20411 regulator, enable the GPU clock controller, GMU, Adreno SMMU
and the GPU on the SA8295P ADP.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-7-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SA8295P ADP has a MAX20411 LDO regulator on I2C 12, supplying the
VDD_GFX pads. Enable the bus and add the maxim,max20411 device on the
bus.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-6-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SA8295P and SA8540P uses an external regulator (max20411), and
gfx.lvl is not provided by rpmh. Drop the power-domains property of the
gpucc node to reflect this.
Fixes: eec51ab2fd ("arm64: dts: qcom: sc8280xp: Add GPU related nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-5-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the description of @memory_type to silence the warning:
drivers/firmware/efi/libstub/alignedmem.c:27: warning: Function parameter or struct member 'memory_type' not described in 'efi_allocate_pages_aligned'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ardb: tweak comment]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>