Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
ACPI specific definitions needed in this driver.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-8-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
ACPI specific definitions needed in this driver.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
ACPI specific definitions needed in this driver.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311181952.1usxCcup-lkp@intel.com/
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Whilst here tidy up a trivial bit of unusual indentation.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Whilst here tidy up a trivial bit of unusual indentation.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This avoids a build warning due to the use of ACPI_PTR().
Given the driver already has APCI specific code under CONFIG_ACPI move
the table rather than removing the ACPI_PTR() call as we already
have the complexity of CONFIG_ACPI.
Dropped a pointless comma after {} terminator whilst moving the code.
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In general using ACPI_PTR() leads to more fragile code for a very
minor saving in storage in the case of !CONFIG_ACPI so in IIO we
prefer not to use it if the only ACPI specific code is the acpi_device_id
table.
In this case will also suppress a unused variable warning.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302142222.vVU0E4eu-lkp@intel.com/
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add honeywell,pressure-triplet property that automatically initializes
pmin-pascal, pmax-pascal so that the user is not required to look-up
the chip in the datasheet and convert various units to pascals himself.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-10-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor driver by splitting the code into core and i2c.
Seemingly redundant read/write function parameters are required for
compatibility with the SPI driver.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-9-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix indentation and whitespace in code that will not get refactored.
Make URL inside comment copy-paste friendly.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-8-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver supports 32*3 combinations of fixed ranges and transfer
functions, plus custom ranges.
So statistically a user has more than 99% chance that the provided
default configuration will generate invalid pressure readings if the
bindings are not initialized and the driver is instantiated via sysfs.
The current patch removes this loophole making sure the driver loads
only if the firmware properties are present.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-7-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Improve driver error resilience by ignoring the measurement if any of
the 3 error flags gets set while interacting with the sensor.
Based on the datasheet, in table 14 on page 14, the status byte
contains:
bit 5 busy flag - 1 if device is busy
bit 2 memory integrity/error flag - 1 if integrity test failed
bit 0 math saturation - 1 if internal math saturation has occurred
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-6-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 1db9d06aaa55 ("mm/slab: remove CONFIG_SLAB from all Kconfig and
Makefile") removes the config SLAB and makes the SLUB allocator the only
default allocator in the kernel. Hence, the advice on reducing OS jitter
due to kworker kernel threads to build with CONFIG_SLUB instead of
CONFIG_SLAB is obsolete.
Remove the obsolete advice to build with SLUB instead of SLAB.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231130095515.21586-1-lukas.bulwahn@gmail.com
This comment about DRM drivers has been there since the first git
commit. It simply doesn't belong in kernel-parameters; remove it.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240111085220.3693059-1-vegard.nossum@oracle.com
There are considerations to drop platform_driver_probe() as a concept
that isn't relevant any more today. It comes with an added complexity
that makes many users hold it wrong. (E.g. this driver should have
better used __init instead of __init_or_module to mark functions only
relevant to .probe() and mark the driver struct with __refdata.)
This fixes a W=1 build warning:
WARNING: modpost: drivers/memory/emif: section mismatch in reference: emif_driver+0x4 (section: .data) -> emif_remove (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240123170846.1362597-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
When on the documentation home page, there won't be any ".current"
element since no entry from the TOC was selected yet. That results in a
javascript error. Fix that by only trying to set the scrollTop if we
have matches for current entries.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240123162157.61819-2-gustavo.sousa@intel.com
Add a compatible for MMS252 touchscreen which appears to work fine with
the MMS114 driver.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bryant Mairs <bryant@mai.rs>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231105204759.37107-2-bryant@mai.rs
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move the function description comment to immediately above the
function implementation, the add function parameter descriptions to
prevent kernel-doc warnings:
clk-usb.c:80: warning: expecting prototype for sunxi_usb_clk_setup(). Prototype was for SUNXI_USB_MAX_SIZE() instead
clk-usb.c:91: warning: Function parameter or struct member 'node' not described in 'sunxi_usb_clk_setup'
clk-usb.c:91: warning: Function parameter or struct member 'data' not described in 'sunxi_usb_clk_setup'
clk-usb.c:91: warning: Function parameter or struct member 'lock' not described in 'sunxi_usb_clk_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051858.17647-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Move the function description kernel-doc comment to immediately above
the function implementation, correct the function name in the comment,
then add a function parameter description to prevent these kernel-doc
warnings:
drivers/clk/sunxi/clk-sun9i-cpus.c:25: warning: expecting prototype for sun9i_a80_cpus_clk_setup(). Prototype was for SUN9I_CPUS_MAX_PARENTS() instead
clk-sun9i-cpus.c:184: warning: Function parameter or struct member 'node' not described in 'sun9i_a80_cpus_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051845.17603-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Move the function kernel-doc comment to be immediately before the
function implementation, then add a function parameter description
to prevent kernel-doc warnings:
clk-a20-gmac.c:43: warning: expecting prototype for sun7i_a20_gmac_clk_setup(). Prototype was for SUN7I_A20_GMAC_GPIT() instead
clk-a20-gmac.c:53: warning: Function parameter or struct member 'node' not described in 'sun7i_a20_gmac_clk_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051837.17564-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
After the DT conversion of SH-Mobile and Armadillo-800-EVA display
support, all devices are registered from DT, so we can remove the
registration of clkdevs.
Add the missing #include <linux/slab.h>, which was included implicitly
through <linux/clkdev.h> before.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e98a6e47ebecc44fa41de6d88b4ed20c6efbd177.1705931322.git.geert+renesas@glider.be
Some boards might use Linux and another OS at the same time. In such
case, currently, during booting, Linux will stop necessary module clocks
which are not used on the Linux side, but are used by another OS.
To avoid such situation, renesas-cpg-mssr tries to find
status = "reserved" devices (A), and adds CLK_IGNORE_UNUSED flag to its
<&cgp CPG_MOD xxx> clock (B).
Table 2.4: Values for status property
https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf
"reserved"
Indicates that the device is operational, but should not be
used. Typically this is used for devices that are controlled
by another software component, such as platform firmware.
ex)
scif5: serial@e6f30000 {
...
(B) clocks = <&cpg CPG_MOD 202>,
<&cpg CPG_CORE R8A7795_CLK_S3D1>,
<&scif_clk>;
...
(A) status = "reserved";
};
Cc: Aymeric Aillet <aymeric.aillet@iot.bzh>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/878r4ygfap.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This cpupower fixes update for Linux 6.8-rc2 consists of one single fix
to an issue where CFLAGS is passed as a make argument for cpupower, but
bench makefile does not inherit and append to them.
This fixes the problem so the user specified CFLAGS are honored.
-----BEGIN PGP SIGNATURE-----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=0pEq
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge cpupower utility update for 6.8-rc2 from Shuah Khan:
"This cpupower fixes update for Linux 6.8-rc2 consists of one single fix
to an issue where CFLAGS is passed as a make argument for cpupower, but
bench makefile does not inherit and append to them."
This fixes the problem so the user specified CFLAGS are honored.
* tag 'linux-cpupower-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools cpupower bench: Override CFLAGS assignments
The sparse tool complains about the remove of the _iomem attribute.
stm32_rproc.c:660:17: warning: cast removes address space '__iomem' of expression
Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to addresses pointer,
which are then managed by the remoteproc core as a pointer to a
resource_table structure.
Fixes: 8a471396d2 ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The sparse tool complains about the attribute conversion between
a _iomem void * and a void *:
stm32_rproc.c:122:12: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected void *va @@ got void [noderef] __iomem * @@
stm32_rproc.c:122:12: sparse: expected void *va
stm32_rproc.c:122:12: sparse: got void [noderef] __iomem *
Add '__force' to explicitly specify that the cast is intentional.
This conversion is necessary to cast to virtual addresses pointer,used,
by the remoteproc core.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150052.HCiNKlqB-lkp@intel.com/
Fixes: 13140de09c ("remoteproc: stm32: add an ST stm32_rproc driver")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20240117135312.3381936-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Kernel has its own official true/false definitions.
The defines aren't even used in this file.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Quota code acquires dquot->dq_lock whenever reading / writing dquot.
When reading / writing quota info we hold dqio_sem. Since these locks
can be acquired during inode reclaim (through dquot_drop() -> dqput() ->
dquot_release()) we are setting nofs allocation context whenever
acquiring these locks. Hence there's no need to use GFP_NOFS allocations
in quota code doing IO. Just switch it to GFP_KERNEL.
Signed-off-by: Jan Kara <jack@suse.cz>
dqio_sem can be acquired during inode reclaim through dquot_drop() ->
dqput() -> dquot_release() -> write_file_info() context. In some cases
(most notably through dquot_get_next_id()) it can be acquired without
holding dquot->dq_lock (which already sets nofs allocation context). So
we need to set nofs allocation context when acquiring it as well.
Signed-off-by: Jan Kara <jack@suse.cz>
ext2_xattr_cache_insert() calls mb_cache_entry_create() with GFP_NOFS
because it is called under EXT2_I(inode)->xattr_sem. However xattr_sem
or any higher ranking lock is not acquired on fs reclaim path for ext2
at least since we don't do page writeback from direct reclaim. Thus
GFP_NOFS is not needed.
Signed-off-by: Jan Kara <jack@suse.cz>
ext2_get_blocks() calls sb_issue_zeroout() with GFP_NOFS flag. However
the call is performed under inode->i_rwsem and
EXT2_I(inode)->i_truncate_mutex neither of which is acquired during
direct fs reclaim. So it is safe to change the gfp mask to GFP_KERNEL.
Signed-off-by: Jan Kara <jack@suse.cz>
The allocation happens under inode->i_rwsem and
EXT2_I(inode)->i_truncate_mutex. Neither of them is acquired during
direct fs reclaim so the allocation can be changed to GFP_KERNEL.
Signed-off-by: Jan Kara <jack@suse.cz>
udf_expand_file_adinicb() is called under inode->i_rwsem and
mapping->invalidate_lock. i_rwsem is safe wrt fs reclaim,
invalidate_lock on this inode is safe as well (we hold inode reference
so reclaim will not touch it, furthermore even lockdep should not
complain as invalidate_lock is acquired from udf_evict_inode() only when
truncating inode which should not happen from fs reclaim).
Signed-off-by: Jan Kara <jack@suse.cz>
udf_load_pvoldesc() is called only during mount when it is safe to
enter fs reclaim (we hold only s_umount semaphore). Change GFP_NOFS to
GFP_KERNEL allocation.
Signed-off-by: Jan Kara <jack@suse.cz>
The GFP_NOFS allocation in udf_symlink() is called only under
inode->i_rwsem and UDF_I(inode)->i_data_sem. The first is safe wrt
reclaim, the second should be as well but allocating unde this lock is
actually unnecessary. Move the allocation from under i_data_sem and
change it to GFP_KERNEL.
Signed-off-by: Jan Kara <jack@suse.cz>
Directory iteration code was using GFP_NOFS allocations in two places.
However the code is called only under inode->i_rwsem which is generally
safe wrt reclaim. So we can do the allocations with GFP_KERNEL instead.
Signed-off-by: Jan Kara <jack@suse.cz>
The framer codec interacts with a framer.
It allows to use some of the framer timeslots as audio channels to
transport audio data over the framer E1/T1/J1 lines.
It also reports line carrier detection events through the ALSA jack
detection feature.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://msgid.link/r/20240123165615.250303-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge exportfs fixes from Chuck Lever:
* tag 'exportfs-6.9' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/cel/linux:
fs: Create a generic is_dot_dotdot() utility
exportfs: fix the fallback implementation of the get_name export operation
Link: https://lore.kernel.org/r/BDC2AEB4-7085-4A7C-8DE8-A659FE1DBA6A@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
When printing eventfd->count, interrupts will be disabled and a spinlock
will be obtained, competing with eventfd_write(). By moving the
"eventfd-count" print out of the spinlock and merging multiple
seq_printf() into one, it could improve a bit, just like timerfd_show().
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Link: https://lore.kernel.org/r/tencent_B0B3D2BD9861FD009E03AB18A81783322709@qq.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The most visible fix here is the ath11k crash fix which was introduced
in v6.7. We also have a fix for iwlwifi memory corruption and few
smaller fixes in the stack.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmWuipMRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt17wgAhrkxpwRpMuRrV6VxHl9m+NXk7is2vni2
JZbqlvMIw1Hm+40K9D0WgFdNZUeAtBcd567MAbiqdzqRNB9DtEvnsXIKlKINwxIA
QFskkXR1f0sj79Hz3q7iWQq+jxDvAU5tge/WU65Na7+224sdyzBg7DZab8/buOsm
1xdx69MtGNU+dm4+V1Xp8h9jB7WAjq7N+ZhC6YfH6QSCL7JSL9Co/NC098gBnAEx
cm59vPOxk8+QoHKDjjmClTIhxOEgR6pSM8T3Dne9OYO8ONhxqdVSgd0Br+mEZgQ4
r61i88zK6ZmVZYckk6fhuGCLiKC6CFwS0eCLDQnKK1ufyRxDi84Y/Q==
=Cwmf
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc2
The most visible fix here is the ath11k crash fix which was introduced
in v6.7. We also have a fix for iwlwifi memory corruption and few
smaller fixes in the stack.
* tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix race condition on enabling fast-xmit
wifi: iwlwifi: fix a memory corruption
wifi: mac80211: fix potential sta-link leak
wifi: cfg80211/mac80211: remove dependency on non-existing option
wifi: cfg80211: fix missing interfaces when dumping
wifi: ath11k: rely on mac80211 debugfs handling for vif
wifi: p54: fix GCC format truncation warning with wiphy->fw_version
====================
Link: https://lore.kernel.org/r/20240122153434.E0254C433C7@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The host and target use two definition of aer type, unify
them into a single one.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Revert commit ed309ce522 ("RISC-V: mark hibernation as nonportable")
as it appears the broken versions of OpenSBI have not made it to
production on any systems that support hibernation.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230802-chef-throng-d9de8b672a49@wendy
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
De-duplicate the same functionality in several places by hoisting
the is_dot_dotdot() utility function into linux/fs.h.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The fallback implementation for the get_name export operation uses
readdir() to try to match the inode number to a filename. That filename
is then used together with lookup_one() to produce a dentry.
A problem arises when we match the '.' or '..' entries, since that
causes lookup_one() to fail. This has sometimes been seen to occur for
filesystems that violate POSIX requirements around uniqueness of inode
numbers, something that is common for snapshot directories.
This patch just ensures that we skip '.' and '..' rather than allowing a
match.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/linux-nfs/CAOQ4uxiOZobN76OKB-VBNXWeFKVwLW_eK5QtthGyYzWU9mjb7Q@mail.gmail.com/
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>