Filesystems should use folio->index and folio->mapping, instead of
folio_index(folio), folio_mapping() and folio_file_mapping() since
they know that it's in the pagecache.
Change this automagically with:
perl -p -i -e 's/folio_mapping[(]([^)]*)[)]/\1->mapping/g' fs/afs/*.c
perl -p -i -e 's/folio_file_mapping[(]([^)]*)[)]/\1->mapping/g' fs/afs/*.c
perl -p -i -e 's/folio_index[(]([^)]*)[)]/\1->index/g' fs/afs/*.c
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
'leakage_table' will always be successfully initialized as a pointer
to '&rdev->pm.dpm.dyn_state.cac_leakage_table'.
Remove unnecessary check if only to silence static checkers.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool Svace.
Fixes: 69e0b57a91 ("drm/radeon/kms: add dpm support for cayman (v5)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Filesystems should use folio->index and folio->mapping, instead of
folio_index(folio), folio_mapping() and folio_file_mapping() since
they know that it's in the pagecache.
Change this automagically with:
perl -p -i -e 's/folio_mapping[(]([^)]*)[)]/\1->mapping/g' fs/netfs/*.c
perl -p -i -e 's/folio_file_mapping[(]([^)]*)[)]/\1->mapping/g' fs/netfs/*.c
perl -p -i -e 's/folio_index[(]([^)]*)[)]/\1->index/g' fs/netfs/*.c
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-cifs@vger.kernel.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
Inside the if block with (running == 0), the checks for 'running'
possibly being non-zero are redundant. Remove them altogether.
This change is similar to the one authored by Heinrich Schuchardt
<xypron.glpk@gmx.de> in commit
ddbbd3be96 ("drm/radeon: remove dead code, si_mc_load_microcode (v2)")
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool Svace.
Fixes: 0af62b0168 ("drm/radeon/kms: add ucode loader for NI")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
To reduce the risk of speaker damage the PA gain needs to be limited on
machines like the Lenovo Thinkpad X13s until we have active speaker
protection in place.
Limit the gain to the current default setting provided by the UCM
configuration which most user have so far been using (due to a bug in
the configuration files which prevented hardware volume control [1]).
The wsa883x PA volume control also turned out to be broken, which meant
that the default setting used by UCM configuration is actually the
lowest level (-3 dB). With the codec driver fixed, hardware volume
control also works as expected.
Note that the new wsa884x driver most likely suffers from a similar bug,
I'll send a fix for that once I've got that confirmed.
Included is also a related fix for the LPASS WSA macro driver, which
was changing the digital gain setting behind the back of user space and
which can result in excessive (or too low) digital gain.
There are further Qualcomm codec drivers that similarly appear to
manipulate various gain settings, but on closer inspection it turns out
that they only write back the current settings. Tests reveal that these
writes are indeed needed for any prior updates to take effect (at least
for the WSA and RX macros).
[1] https://github.com/alsa-project/alsa-ucm-conf/pull/382
If the boot logo does not fit, a message is printed, including a wrong
function name prefix. Instead of correcting the function name (or using
__func__), just use "fbcon", like is done in several other messages.
While at it, modernize the call by switching to pr_info().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----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=38MW
-----END PGP SIGNATURE-----
Merge tag 'for-6.8-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned mode fixes:
- fix slowdown when writing large file sequentially by looking up
block groups with enough space faster
- locking fixes when activating a zone
- new mount API fixes:
- preserve mount options for a ro/rw mount of the same subvolume
- scrub fixes:
- fix use-after-free in case the chunk length is not aligned to
64K, this does not happen normally but has been reported on
images converted from ext4
- similar alignment check was missing with raid-stripe-tree
- subvolume deletion fixes:
- prevent calling ioctl on already deleted subvolume
- properly track flag tracking a deleted subvolume
- in subpage mode, fix decompression of an inline extent (zlib, lzo,
zstd)
- fix crash when starting writeback on a folio, after integration with
recent MM changes this needs to be started conditionally
- reject unknown flags in defrag ioctl
- error handling, API fixes, minor warning fixes
* tag 'for-6.8-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: scrub: limit RST scrub to chunk boundary
btrfs: scrub: avoid use-after-free when chunk length is not 64K aligned
btrfs: don't unconditionally call folio_start_writeback in subpage
btrfs: use the original mount's mount options for the legacy reconfigure
btrfs: don't warn if discard range is not aligned to sector
btrfs: tree-checker: fix inline ref size in error messages
btrfs: zstd: fix and simplify the inline extent decompression
btrfs: lzo: fix and simplify the inline extent decompression
btrfs: zlib: fix and simplify the inline extent decompression
btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args
btrfs: avoid copying BTRFS_ROOT_SUBVOL_DEAD flag to snapshot of subvolume being deleted
btrfs: don't abort filesystem when attempting to snapshot deleted subvolume
btrfs: zoned: fix lock ordering in btrfs_zone_activate()
btrfs: fix unbalanced unlock of mapping_tree_lock
btrfs: ref-verify: free ref cache before clearing mount opt
btrfs: fix kvcalloc() arguments order in btrfs_ioctl_send()
btrfs: zoned: optimize hint byte for zoned allocator
btrfs: zoned: factor out prepare_allocation_zoned()
Currently, both ATA_LPM_UNKNOWN (0) and ATA_LPM_MAX_POWER (1) displays
as "max_performance" in sysfs.
This is quite misleading as they are not the same.
For ATA_LPM_UNKNOWN, ata_eh_set_lpm() will not be called at all,
leaving the configuration in unknown state.
For ATA_LPM_MAX_POWER, ata_eh_set_lpm() is called, and setting the
policy to ATA_LPM_MAX_POWER.
This also matches the description of the SATA_MOBILE_LPM_POLICY Kconfig:
0 => Keep firmware settings
1 => Maximum performance
Thus, update the sysfs description for ATA_LPM_UNKNOWN to match reality.
While at it, update libata.h to mention that the ascii descriptions
are in libata-sata.c and not in libata-scsi.c.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
If get_unused_fd_flags() fails, the error handling is incomplete because
bprm->cred is already set to NULL, and therefore free_bprm will not
unlock the cred_guard_mutex. Note there are two error conditions which
end up here, one before and one after bprm->cred is cleared.
Fixes: b8a61c9e7b ("exec: Generic execfd support")
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/AS8P193MB128517ADB5EFF29E04389EDAE4752@AS8P193MB1285.EURP193.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Add i.MX93/95 flexspi compatible strings, which are compatible with
i.MX8MM
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20240122091510.2077498-2-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add i.MX95 LPSPI compatible string, same as i.MX93 compatible with
i.MX7ULP
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20240122091510.2077498-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Let logitech-hidpp driver claim Logitech G Pro X Superlight 2.
Reported-by: Marcus Rückert <darix@opensu.se>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Minor code style alignment cleanup for perf_data__switch() and
perf_data__write().
No functional change.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-4-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In pipe mode, no need to switch perf data output, therefore,
'--timestamp-filename' option should not take effect.
Check the conflict before recording and output WARNING.
In this case, the check pipe mode in perf_data__switch() can be removed.
Before:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Dump -.2024011812110182 ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2176784359
#
# Overhead Command Shared Object Symbol
# ........ ....... .................... ......................................
#
97.83% perf perf [.] noploop
#
# (Tip: Print event counts in CSV format with: perf stat -x,)
#
After:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
WARNING: --timestamp-filename option is not available in pipe mode.
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2185575421
#
# Overhead Command Shared Object Symbol
# ........ ....... ..................... .............................................
#
97.75% perf perf [.] noploop
#
# (Tip: Profiling branch (mis)predictions with: perf record -b / perf report)
#
Fixes: ecfd7a9c04 ("perf record: Add '--timestamp-filename' option to append timestamp to output file name")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf_data__switch() may not assign a legal value to 'new_filename'.
In this case, 'new_filename' uses the on-stack value, which may cause a
incorrect free and unexpected result.
Fixes: 03724b2e9c ("perf record: Allow to limit number of reported perf.data files")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The DWARF location expression can be fairly complex and it'd be hard
to match it with the condition correctly. So let's be conservative
and only allow simple expressions. For now it just checks the first
operation in the list. The following operations looks ok:
* DW_OP_stack_value
* DW_OP_deref_size
* DW_OP_deref
* DW_OP_piece
To refuse complex (and unsupported) location expressions, add
check_allowed_ops() to compare the rest of the list. It seems earlier
result contained those unsupported expressions. For example, I found
some local struct variable is placed like below.
<2><43d1517>: Abbrev Number: 62 (DW_TAG_variable)
<43d1518> DW_AT_location : 15 byte block: 91 50 93 8 91 78 93 4 93 84 8 91 68 93 4
(DW_OP_fbreg: -48; DW_OP_piece: 8;
DW_OP_fbreg: -8; DW_OP_piece: 4;
DW_OP_piece: 1028;
DW_OP_fbreg: -24; DW_OP_piece: 4)
Another example is something like this.
0057c8be ffffffffffffffff ffffffff812109f0 (base address)
0057c8ce ffffffff812112b5 ffffffff812112c8 (DW_OP_breg3 (rbx): 0;
DW_OP_constu: 18446744073709551612;
DW_OP_and;
DW_OP_stack_value)
It should refuse them. After the change, the stat shows:
Annotate data type stats:
total 294, ok 158 (53.7%), bad 136 (46.3%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
53 : no_var
14 : no_typeinfo
7 : bad_offset
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240117062657.985479-10-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Local variables are allocated in the stack and the location list
should look like base register(s) and an offset. Extend the
die_find_variable_by_reg() to handle the following expressions
* DW_OP_breg{0..31}
* DW_OP_bregx
* DW_OP_fbreg
Ususally DWARF subprogram entries have frame base information and
use it to locate stack variable like below:
<2><43d1575>: Abbrev Number: 62 (DW_TAG_variable)
<43d1576> DW_AT_location : 2 byte block: 91 7c (DW_OP_fbreg: -4) <--- here
<43d1579> DW_AT_name : (indirect string, offset: 0x2c00c9): i
<43d157d> DW_AT_decl_file : 1
<43d157e> DW_AT_decl_line : 78
<43d157f> DW_AT_type : <0x43d19d7>
I found some differences on saving the frame base between gcc and clang.
The gcc uses the CFA to get the base so it needs to check the current
frame's CFI info. In this case, stack offset needs to be adjusted from
the start of the CFA.
<1><1bb8d>: Abbrev Number: 102 (DW_TAG_subprogram)
<1bb8e> DW_AT_name : (indirect string, offset: 0x74d41): kernel_init
<1bb92> DW_AT_decl_file : 2
<1bb92> DW_AT_decl_line : 1440
<1bb94> DW_AT_decl_column : 18
<1bb95> DW_AT_prototyped : 1
<1bb95> DW_AT_type : <0xcc>
<1bb99> DW_AT_low_pc : 0xffffffff81bab9e0
<1bba1> DW_AT_high_pc : 0x1b2
<1bba9> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <------ here
<1bbab> DW_AT_call_all_calls: 1
<1bbab> DW_AT_sibling : <0x1bf5a>
While clang sets it to a register directly and it can check the register
and offset in the instruction directly.
<1><43d1542>: Abbrev Number: 60 (DW_TAG_subprogram)
<43d1543> DW_AT_low_pc : 0xffffffff816a7c60
<43d154b> DW_AT_high_pc : 0x98
<43d154f> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp)) <---------- here
<43d1551> DW_AT_GNU_all_call_sites: 1
<43d1551> DW_AT_name : (indirect string, offset: 0x3bce91): foo
<43d1555> DW_AT_decl_file : 1
<43d1556> DW_AT_decl_line : 75
<43d1557> DW_AT_prototyped : 1
<43d1557> DW_AT_type : <0x43c7332>
<43d155b> DW_AT_external : 1
Also it needs to update the offset after finding the type like global
variables since the offset was from the frame base. Factor out
match_var_offset() to check global and local variables in the same way.
The type stats are improved too:
Annotate data type stats:
total 294, ok 160 (54.4%), bad 134 (45.6%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
51 : no_var
14 : no_typeinfo
7 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-9-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The die_get_cfa() is to get frame base register and offset at the given
instruction address (pc). This info will be used to locate stack
variables which have location expression using DW_OP_fbreg.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Global variables are accessed using PC-relative address so it needs to
be handled separately. The PC-rel addressing is detected by using
DWARF_REG_PC. On x86, %rip register would be used.
The address can be calculated using the ip and offset in the
instruction. But it should start from the next instruction so add
calculate_pcrel_addr() to do it properly.
But global variables defined in a different file would only have a
declaration which doesn't include a location list. So it first tries
to get the type info using the address, and then looks up the variable
declarations using name. The name of global variables should be get
from the symbol table. The declaration would have the type info.
So extend find_var_type() to take both address and name for global
variables.
The stat is now looks like:
Annotate data type stats:
total 294, ok 153 (52.0%), bad 141 (48.0%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
61 : no_var
10 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Extend find_data_type_die() to find data type from PC-relative address
using die_find_variable_by_addr(). Users need to pass the address for
the (global) variable.
The offset for the variable should be updated after finding the type
because the offset in the instruction is just to calcuate the address
for the variable. So it changed to pass a pointer to offset and renamed
it to 'poffset'.
First it searches variables in the CU DIE as it's likely that the global
variables are defined in the file level. And then it iterates the scope
DIEs to find a local (static) variable.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
A typical function prologue and epilogue include multiple stack
operations to save and restore the current value of registers.
On x86, it looks like below:
push r15
push r14
push r13
push r12
...
pop r12
pop r13
pop r14
pop r15
ret
As these all touches the stack memory region, chances are high that they
appear in a memory profile data. But these are not used for any real
purpose yet so it'd return no types.
One of my profile type shows that non neglible portion of data came from
the stack operations. It also seems GCC generates more stack operations
than clang.
Annotate Instruction stats
total 264, ok 169 (64.0%), bad 95 (36.0%)
Name : Good Bad
-----------------------------------------------------------
movq : 49 27
movl : 24 9
popq : 0 19 <-- here
cmpl : 17 2
addq : 14 1
cmpq : 12 2
cmpxchgl : 3 7
Instead of dealing them as unknown, let's create a seperate pseudo type
to represent those stack operations separately.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On x86, instructions for array access often looks like below.
mov 0x1234(%rax,%rbx,8), %rcx
Usually the first register holds the type information and the second one
has the index. And the current code only looks up a variable for the
first register. But it's possible to be in the other way around so it
needs to check the second register if the first one failed.
The stat changed like this.
Annotate data type stats:
total 294, ok 148 (50.3%), bad 146 (49.7%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
66 : no_var
10 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When a sample was come from a conditional branch without a memory
operand, it could be due to a macro fusion with a previous instruction.
So it needs to check the memory operand in the previous one.
This improves the stat like below:
Annotate data type stats:
total 294, ok 147 (50.0%), bad 147 (50.0%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
71 : no_var
6 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
For the performance reason, I prefer llvm-objdump over GNU's. But I
found that llvm-objdump puts x86 lock prefix in a separate line like
below.
ffffffff81000695: f0 lock
ffffffff81000696: ff 83 54 0b 00 00 incl 2900(%rbx)
This should be parsed properly, but I just changed to find the insn
with next offset for now.
This improves the statistics as it can process more instructions.
Annotate data type stats:
total 294, ok 144 (49.0%), bad 150 (51.0%)
-----------------------------------------------------------
30 : no_sym
35 : no_mem_ops
71 : no_var
6 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If pkg-config is not installed when libtraceevent is linked, the build fails.
The error information is as follows:
$ make
<SNIP>
In file included from /home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/evsel.c:43:
/home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/trace-event.h:149:62: error: operator '&&' has no right operand
149 | #if defined(LIBTRACEEVENT_VERSION) && LIBTRACEEVENT_VERSION >= MAKE_LIBTRACEEVENT_VERSION(1, 5, 0)
| ^~
error: command '/usr/bin/gcc' failed with exit code 1
cp: cannot stat 'python_ext_build/lib/perf*.so': No such file or directory
make[2]: *** [Makefile.perf:668: python/perf.cpython-310-x86_64-linux-gnu.so] Error 1
make[2]: *** Waiting for unfinished jobs....
Because pkg-config is not installed, fail to get libtraceevent version in
Makefile.config file. As a result, LIBTRACEEVENT_VERSION is empty.
However, the preceding error information is not user-friendly.
Identify errors in advance by checking that pkg-config is installed at
compile time.
The build results of various scenarios are as follows:
1. build successful when libtraceevent is not linked and pkg-config is not installed
$ pkg-config --version
-bash: /usr/bin/pkg-config: No such file or directory
$ make clean >/dev/null
$ make NO_LIBTRACEEVENT=1 >/dev/null
Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
PERF_VERSION = 6.7.rc6.gd988c9f511af
$ echo $?
0
2. dummy pkg-config is missing when libtraceevent is linked
$ pkg-config --version
-bash: /usr/bin/pkg-config: No such file or directory
$ make clean >/dev/null
$ make >/dev/null
Makefile.config:221: *** Error: pkg-config needed by libtraceevent is missing on this system, please install it. Stop.
make[1]: *** [Makefile.perf:251: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
$ echo $?
2
3. build successful when libtraceevent is linked and pkg-config is installed
$ pkg-config --version
0.29.2
$ make clean >/dev/null
$ make >/dev/null
Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
PERF_VERSION = 6.7.rc6.gd988c9f511af
$ echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240112034019.3558584-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This test case often fails on s390 (about 2 out of 10) because the
10% percent limit on the difference between --bpf-counters event counting
and s390 hardware counting is more than 10% in all failure cases.
Raise the limit to 20% on s390 and the test case succeeds.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20240108084009.3959211-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Consolidate the calls to allow_write_access()/fput() into a single
place, since we repeat this code pattern. Add comments around the
callers for the details on it.
Link: https://lore.kernel.org/r/202209161637.9EDAF6B18@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
On SoC like i.MX8QXP some SAI IP cores support only Rx path. Allow
specifying only an Rx DMA channel, while omitting the Tx one.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231219122957.3358149-2-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some SoC like i.MX8QXP use a power-domain for this IP, so add it to the
supported properties.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231219122957.3358149-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The UCM configuration for the Lenovo ThinkPad X13s has up until now
been setting the speaker PA volume to the minimum -3 dB when enabling
the speakers, but this does not prevent the user from increasing the
volume further.
Limit the digital gain and PA volumes to a combined -3 dB in the machine
driver to reduce the risk of speaker damage until we have active speaker
protection in place (or higher safe levels have been established).
Note that the PA volume limit cannot be set lower than 0 dB or
PulseAudio gets confused when the first 16 levels all map to -3 dB.
Also note that this will probably need to be generalised using
machine-specific limits, but a common limit should do for now.
Cc: <stable@vger.kernel.org> # 6.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122181819.4038-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Scaling min/max freq values were being cached and lagging a setting
each time. Fix the ordering of the clamp call to ensure they work.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Fixes: febab20cae ("cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wyes Karny <wkarny@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change order of properties in order for the end user to hopefully ignore
pmin-pascal and pmax-pascal which are superseded by pressure-triplet.
Add pressure-triplet property which automatically initializes
pmin-pascal and pmax-pascal inside the driver.
Rework honeywell,pmXX-pascal requirements based on feedback from
Jonathan and Conor.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231229092445.30180-3-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Define enum inside the honeywell,transfer-function property block.
Set the correct irq edge in the example block.
Based on the datasheet, in table 13 on page 11:
"End-of-conversion indicator: This pin is set high when a measurement
and calculation have been completed and the data is ready to be
clocked out"
Add description on End-of-conversion interrupt.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-2-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a SPDX-License-Identifier to the 88PM80x onkey driver and drop the
GPL boilerplate in accordance with current kernel code guidelines.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240121-88pm80x-onkey-spdx-v1-1-b646d4749f5b@skole.hr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a copy and paste error so it accidentally returns ->convst_gpio
instead of ->reset_gpio. Fix it.
Fixes: 0b76ff46c4 ("iio: adc: Add support for AD7091R-8")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/fd905ad0-6413-489c-9a3b-90c0cdb35ec9@moroto.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Something when wrong when applying the original patch and only the
c file made it in. Here the rest of the changes are applied.
Fixes: c9180b8e39 ("iio: humidity: Add driver for ti HDC302x humidity sensors")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Li peiyu <579lpy@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
There are a ton of build errors when REGMAP is not set, so select
REGMAP to fix all of them.
Examples (not all of them):
../drivers/iio/imu/bno055/bno055_ser_core.c:495:15: error: variable 'bno055_ser_regmap_bus' has initializer but incomplete type
495 | static struct regmap_bus bno055_ser_regmap_bus = {
../drivers/iio/imu/bno055/bno055_ser_core.c:496:10: error: 'struct regmap_bus' has no member named 'write'
496 | .write = bno055_ser_write_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c:497:10: error: 'struct regmap_bus' has no member named 'read'
497 | .read = bno055_ser_read_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c: In function 'bno055_ser_probe':
../drivers/iio/imu/bno055/bno055_ser_core.c:532:18: error: implicit declaration of function 'devm_regmap_init'; did you mean 'vmem_map_init'? [-Werror=implicit-function-declaration]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c:532:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c: At top level:
../drivers/iio/imu/bno055/bno055_ser_core.c:495:26: error: storage size of 'bno055_ser_regmap_bus' isn't known
495 | static struct regmap_bus bno055_ser_regmap_bus = {
Fixes: 2eef5a9cc6 ("iio: imu: add BNO055 serdev driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrea Merello <andrea.merello@iit.it>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240110185611.19723-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>